64-bit system tries to install the 32-bit updates

Similar Questions

• Error message - system tries to install the HP Photosmart C4680 printer software

  I installed Windows 8 Preview of consumer months ago.  Now, I get an installation error that does not affect the printer - it is fine as it is - and I can't do the install failed mended stop repeat whenever I want to use the printer.

  I'm guessing that the drivers are not compatible with this version of Windows, and the system tries to do a regular update of some sort.  Known issue?  If so, can I disable in order to install so that I'm not tying up of resources all the time?

  Hi CalypsoReid,

  See the following thread: http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-Windows-8-Consumer/m-p/1334287

• Windows Vista continues trying to install the same 5 updates

  See above

  I tried to install that individually, it seems to work then all of a sudden, it shows all the 5 installation again once I also tried to install with anti virus disabled, but it makes no difference

  Very well. Welcome & thank you for your comments.

• in a loop of constantly trying to install the latest security update. more and more, please help.

  I installed ie8 security was last updated. Now I'm in a 'loop', he says constantly ready to install, I click on install, then I reboot, then he asks the same question again, ready to install, I click Yes then I have to restart, then when windows starts, he asks me once again. Finally I turned automatic updates, so now I have not this propblem. I want to solve this problem, please help me, Greg.

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For individuals, free support for security updates (only!) is available by calling the 1-866-234-6020 or 1-800-936-5700 to the United States and Canada or by contacting your local Microsoft subsidiary. For more information about how to contact your local Microsoft subsidiary for security-related support questions updates (only!), visit the following Microsoft International Support Web site: http://support.microsoft.com/common/international.aspx?rdpath=4

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  (E.g., US & CA) North America customers can also obtain instant access to unlimited no charge by e-mail or chat support for security updates (only!) by visiting the following Microsoft Web site: http://support.microsoft.com/oas/default.aspx?&prid=7552

• Code 646 when trying to install the updates. __

  Every day my computer tells me install 5 updates. "I do it but the next day"
  back again. I went on the Microsoft Update site and tried to install the same 5 updates and I received an error Code 646. Anyone same problem?

  the KB includes an automated fix 50461 which corrects the problem, look here: http://support.microsoft.com/kb/2258121>

  Let me know if this helped.

• Encountered the error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198)

  I tried to install the update several times, but I get the same error every time ' encountered error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198).

  I tried to use products different a.v. to search for the virus, the male ware, kits root and found nothing.

  Ran the update without any firewall or AV program running and still received the same error.

  AMD Turion 64 X 2 Mobile, Windows 7 Ultimate 64, 4 GB ram, 42 GB of 110 GB of free space on the drive, 4 GB page file.

  Hi a93svtf,

  This problem occurs when some files in the update are missing, even if the update is downloaded and extracted successfully.

  Step 1: Run the fixit available in the article below

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services

  http://support.Microsoft.com/kb/910336

  Step 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Now, try to install the update

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Restarting my computer (Dell... Microsoft XP), the system tries to install creative projects and requires the insertion of a CD that I don't have or want.

  Restarting my computer (Dell... Microsoft XP), the system tries to install creative projects and requires the insertion of a CD that I don't have or want.

  I tried all obvious ploys, but I can't always Cancel/remove this element which is a nuisance, because it prevents me to install other programs that I want to.
  Any other suggestions would be welcome.
   
  Original title: CREATIVE WINDOWS

  Robert,

  Try to run this Fixit: http://support.microsoft.com/mats/Program_Install_and_uninstall

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• I have version 6 Creative Suite Design Standard disc. When I tried to install the software on my new laptop, several components have been installed, but Acrobat and Illustrator were not. The system returned the following message: "Adobe genuine software c

  I have version 6 Creative Suite Design Standard disc. When I tried to install the software on my new laptop, several components have been installed, but Acrobat and Illustrator were not. The system returned the following message: "Adobe genuine software check failed." The product you want to install is not genuine software remains, and seems to be counterfeit. Please report a piracy or contact customer support for assistance. This is the drive I bought from Adobe and running on my old laptop. I have the right product and serial numbers, which allowed me to install several other components of the software.

  Warning: "Adobe software real failure of Validation...". » | Windows

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• After trying to install the updates. my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.

  Visa update problem

  After trying to install the updates.  my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.  I tried to follow the instructions provided here because it seemed to be the same problem.  But when I restart and hold down the F8 key so I can boot into safe mode, I tried selecting safe mode and I get the same results, and I tried again by selecting the option 'Disable automatic reboot' which seems to be an option on the same page with the option of safe mode.  Whatever it is, the same message comes back and I can never get to where I can see my desktop to click 'start '.  I can't get out of this cycle.  I installed the update because it said I needed to install it.

  *************************************************************************************************************************************************

  Turn off your computer by holding the power button for about 20 seconds.
   
  Start your computer in safe mode: press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears
   
  Disable the automatic restart in the event of system failure:
   
  • Click Start
  • Click on Control Panel
  • Click on system and Maintenance link.
  • Click on the system link
  • In the left pane, click Advanced system settings
  • Locate the startup and recovery area, click the settings button.
  • In the startup and recovery window, uncheck the box next to automatically restart.
  • Click OK in the startup and recovery window
  • Click OK in the System Properties window
  • Close the system window
   
  After that... While STAYING in safe mode I do a system restore and maybe try a manual install of the update later.
   
  For the sake of space I refer you to the article about how to proceed.
   
  System restore
  http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx
   
  Windows updates: http://windowshelp.microsoft.com/Windows/en-US/Help/8f259118-0d61-4c7a-8c56-24987e87a8171033.mspx
   
  Please let us know if this solution works for you

  Theresa
  Microsoft Answers Support Engineer

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Error when trying to install the Sims 3 game to 1.39 update

  Original title: Sims 3 SetupNewsetup.cpp error (140)
   
  When I install the 1.39 update THE SIMS 3, I get:
  > SetupNewsetup.cpp (140)
  PAPP:
  PVENDOR:
  PGUID:
  $
  @ Windows XP Service Pack 3 (2600)
  IE Version: 8.0.6001.18702
  Help me I have windows 7 64 bit

  Hello

  1 did you do changes on the computer before the show?

  2 - is the full version of the Sims 3 game?

  Sorry to hear that.

  Third party or the corruption of the Sims software programs are some of the reasons for which you get the error SetupNewsetup.cpp (140).

  I suggest you to reinstall the software to the clean boot and check if the problem persists.

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Step 2: Uninstall the software

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 3: Reinstall the software

  If the problem persists, then I suggest allows you to get assistance to the Sims 3 technical support site.

  I hope this helps. If the problem persists, return and I will be happy to help you.

• my webcam application does not work on my windows 7. It has suddenly stopped working. I tried to install the drivers of webcam from the websites of toshiba, to no avail.

  my webcam application does not work on my windows 7. It has suddenly stopped working. I tried to install the drivers of webcam from the websites of toshiba. but after downloading the drivers, when I run the winrar files, he said inexecutionable. Please help.also when I run the compatibility of the test program, it says the webcam application or incompatible, even if it worked very well earlier.

  See the help/support site Tosh or their forums.

  Have you recently updated of your drivers from somwhere system other than Tosh site or installed any new programs or perform any maintenance operation.

  Program compatibility test cannot be invoked

• I have a Mac Book Pro and I am trying to install the ambient light and I get the error message (205) that my firewall is turned on and is not. My computer is not compatible, or I'm just not doing something right.

  I have a Mac Book Pro and I am trying to install the ambient light and I get the error message (205) that my firewall is turned on and is not. My computer is not compatible, or I'm just not doing something right.

  Please specify the version of Mac OS for reference. just in case if the procedure below did not work.

  N ° 1)

  1) click the icon of the Apple menu and select System Preferences, and then click Network.

  (2) choose the network that is currently connected to the internet can you Ethernet or Airport (Wireless).

  (3) then click on the Advanced button, then click proxies.

  (4) slot 'Select a Proxy Server to configure' uncheck all the boxes proxy, then uncheck "Use FTP Passive Mode (PASV)".

  (5) then click on the Apply Now button.

  Then try to reinstall Adobe Creative cloud,

  Always the same?

  (1) right click on the Finder on dock icon and select the option "Go - To Folder."
  (2) you will get a text box, type in below mentioned command and then press 'return '.

  / etc

  (3) it opens the etc folder, please search for the file named ""host " and copy the same office screen.it"

  (4) double click on the Hosts file, it will open it with TextEdit.

  Let me know if you see any Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?

  
  

  
  

  
  

  
  

  
  

  
  

  ------------------------------------------------------------------------------------------ -
  

  No entry to Adobe? You can follow the procedure below:

  -----------------------------------------------------------------------------------------
  

  Please follow the steps below:

  N ° 1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  
  

  
  

  Step 2)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  
  

  Step 3)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe

  Open file Adobe and trash folders named AAMUpdater and OOBE.

  Step 4)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  (3) then navigate to Application Support > Adobe

  Open file Adobe and trash folders named AAMUpdater, Adobe Application Manager and OOBE.

  
  

  Step 5)

  
  

  
  

  Click on the link below and open Photoshop Elements download link.

  Do not close the page, just keep it open.

  Download Photoshop Elements products | 10, 11, 12, 13

  Click on the link and download file DMG cloud creative Installer directly below and install Adobe Creative Cloud app:

  http://trials2.Adobe.com/AdobeProducts/KCCC/1/OSX10/ACCCx3_0_0_74.dmg

• I'm trying to install the trial version of After Effects and it gives me an error telling me to restart it even after I reboot.

  I'm trying to install the trial version of Adobe After Effects, but when he goes to the installer, it gives me an error telling me to restart my laptop. Even after that I restart my laptop, it gives me the error. Help?

  We do not know. You have not provided any information system or the exact error. This happens most often when a security tool blocks installers or run with insufficient user privileges, but it's everything we can guess a little here.

  Mylenium