64-bit version of itunes need to work on my Dell XPS?
just bought a Dell XPS and I try to download itunes. says he needs a 64-bit version and is not installed correctly. How can I get it? Apple support did not
It comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads
They will help you with your question in Forum Vista programs at the above address.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
iBought a 32 bit version but I need a 64-bit version wath I can do to change it
iBought a 32 bit version but I need a 64-bit version wath I can do to change it
Kindly Download Photoshop Elements | 14, 13, 12, 11, 10 64-bit. from there.
-
IPhone 6 64 IOS 9.3.1 runs the latest version of ITunes 12.3.3.17
After I updated to the latest version of ITunes, when I run the synchronization, it goes through the six steps, and then returns the message that the backup has failed
Running on a 64-bit Windows 8.1 Dell computer.
ITunes now works much more slowly. Takes a long time to load. It takes more than a minute after I plug in my Iphone for the IPhone to be recognized by Itunes.
I rebooted the machine. Remove the locked file. All have failed to solve the problem
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.
More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.
Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.
If you have tried the suggestions above without success, then another option is to go back to the previous version of iTunes that has worked for you. See the roll back tips to installers of iTunes. Roll back of 12.3.3 will be to restore the pre-upgrade library in the previous iTunes libraries folder.
TT2
-
Problems with the installation of iTunes 64-bit version
Hello
I tried to install the 64-bit version of iTunes, but I failed.
I got the following error message:
An error occurred during the installation of Assembly
' microsoft. VC80. CTR, version = "8.0.50727.4053", type =
"win32", publicKeyToken = "qfc8b3b9a1e18e3b", process
or Architecture = "x 86". Please refer to the help and
Support for more information. HRESULT:0 X 80070424.What I will do to have it installed?
Thank you
Hello
· Did you recently install updates on your system?
· Where did you download iTunes?
You must install VC ++ on the system. Once you have it installed then download iTunes on the site and then install it on the system and check out them.
Package redistributable Microsoft Visual C++ 2008 (x 86)
iTunes 8.0.2 for Windows Vista 64-bit
http://support.Apple.com/downloads/iTunes_8_0_2_for_Windows_64_bit
Note: Before you download iTunes I suggest to uninstall the iTunes previously installed on the system.
For more information, see the article mentioned below.
Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.Apple.com/kb/HT1923
Problem installing iTunes or QuickTime for Windows
http://support.Apple.com/kb/ht1926
To further support I suggest you to post your query on the Apple forums.
http://discussions.Apple.com/category.jspa?categoryID=149
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
iTunes has stopped working / Win10 64
Hello
I have a problem running iTunes on 64-bit Windows 10. (Lenovo Thinkpad Yoga 12)
As soon as I click on the iTunes Store tab, the program crashes and I get the message "iTunes has stopped working, Windows is checking for a solution to the problem..." and after a few seconds he said "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. »
I have already tried:
Complete uninstallation of all programs Apple, including the deletion of all files, and then reinstall it.
If I do this, the installation fails. He tells me that the bonjour service cannot be started.
That's why I opened archive installation with 7-zip and has just installed iTunes and support the application. That worked well, but I still get crashes.
I don't know what else I could try and you'd be grateful for any help!
Thank you and best what is the Switzerland
Jonas
The 12.3.3.17 version seems to cause problems for some people. It may be best to roll back to the last version of iTunes that has worked for you. then wait for the following. See the programs installation of iTunes to download links. If you're back from 12.3.3.17 to 12.3.2.35, then you must also restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library.
TT2
-
Hello
Hello, I am a little lost. I bought a T440S a few months ago. When I bought it, I tried to install a distribution: linux debian amd64 wheezy. Nevertheless, I had a lot of problems. Then, I ran Ubuntu. Today, I would like to know if I can go back to Debian or other distributions such as Mint or Fedora (64-bit versions). I need to use the identification of the finger, and I do not have a touch screen.
So, could you give me some advice, please .
I thank you and wish you a good day/evening/night (this is the night, I live in france ).
Hello
I run Fedora 20 x 64 on both my T440s and T440p in a dual-boot configuration. RHEL distributions require a bit of work, once installed as opposed to Ubuntu / Mint that require very little attention. I have no experience with the installation of Debian, so I can't comment on that.
But 20 Fedora works like a charm in all directions and the only thing that I really need to configure the ClickPad. My 440 model s is an i7 with no touchscreen FHD.
Here for info on this page:
-
iTunes no longer works, message windows 10
ITunes only starts to work when I am not connected to the Internet. Once it opens, I can connect my PC to the internet and it will continue to work. So, whenever I want to open Itunes, I have to unplug my computer from the internet, first. I spoke with the Apple support on the phone (the guy doing what he could, I appreciate it a lot), but the problem persists.
I completely remove Itunes from my computer and it did not work. I also tried to reset the cache since both Itunes and Chrome and it has not changed a thing...
Does anyone have a solution to this problem?
This seems to be a problem with 12.3.3 when your Internet connection is using an automatic proxy script. You can try to roll back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you're back from 12.3.3.17 to 12.3.2.35, then you must also restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library.
TT2
-
Firefox 4 will be a 64-bit version?
Firefox 4 will be a 64-bit version?
Sorry, but it will not be a 64-bit version of Firefox 4 for Windows. There are nightly builds at http://nightly.mozilla.org. The constructions are not supported, maybe more volatile than the 32-bit version. You will be limited to 64-bit plugins. Some plugins like MS Silverlight have no 64-bit version (so Netflix will not work in 64-bit mode). It is recommended that you use the 32-bit version to http://www.firefox.com/rc.
-
iOS 8.4.1. A newer version of the iPad (9.2) is available, but he says that this version of iTunes (12.2.2) is the current version. How to upgrade my iOS iPad 9.2?
iOS and iTunes are two completely different things. It could be that your computer is not capable of running the version of iTunes need iOS en 9. Have you tried simply OTA update?
-
Dell OpenManage (64-bit) Version 8.3.0 systems management software
Dell OpenManage Systems Management Software (64 - Bit) Version 8.3.0 will work on a server of PE2900 running Windows Server 2008 R2?
Dell OpenManage Systems Management Software (64-Bit) Version 8.3.0 Hello
I'm afraid that OM 8.3 does not support PE2900.
topics-CDN.Dell.com/.../Dell-OpenManage-Software-V8.3_support Matrix_FR - us.pdf
Note: This forum is dedicated for OpenManage Essentials. In the future please post your query on OMSA on respective forum for quick/prompt response.
-
Where can I download the 64 bit version of windows 7 OS?
Hello.
My warranty on my dell latitude e6500 laptop just recently expired, and of course that means I now have problems
My hard drive crashed, I'm trying to replace it with an SSD.
I intend to reinstall everything on my laptop from scratch, and while im at it I intend to do some updates.
I have windows 7 pro 32 bit Dell DVD re-setup and reinstalling windows XP pro 32-bit DVD, the two discs were supplied with my laptop.
I prefer to use windows 7 64 bit instead of 32 bit, so that I can put more memory in this laptop.
So my question is this: is there a way by which I can download a 64-bit version of the re-installation of windows 7 Dell DVD (an iso file would be nice).
I remember a few years with another computer (non-dell), I was able to go to the website microsoft and request a download free 64-bit to replace my 32-bit installation, is something microsoft still offers, and applies to dell as well? or can I just download a 64-bit version of dell?
I found a dell Backup Recovery Manager in the category downloads available in 32 and 64 bit, for my service tag, is that something that will generate a .iso or windows install package that I can use.
I appreciate any guidance that you guys can give, because my warranty is out and I can't get on the phone or chat online with dell.
You cannot download Dell installation media (or any what Dell media), but you can download Retail media, then activate by phone from Microsoft (NOT Dell) with the key on your COA (keys are interchangeable between the 32-bit/64-bit).
www.mydigitallife.info/Download-Windows-7-ISO-Official-32-bit-and-64-bit-Direct-Download-Links
You can also use any installation media Dell 64-bit from another machine, borrowed from a friend, or bought on ebay. In the United States, Dell will send you filter replacement, although ONLY for the bit-level and the version you bought.
-
FN + F3 disable the Touchpad does not work. Dell XPS L702X
Hello, I am new to this forum.
The function FN + F3 that disable the Touchpad does not work, my laptop Dell XPS 17 (L702X)
I googled my problem and the only thing I found was this: http://en.community.dell.com/support-forums/laptop/f/3518/t/19454265.aspx
I think that my problems with the touchpad started when I plugged a mouse into the USB port. It didn't work (it worked well before), and in material-sound-mouse control panel, the system asked me to uninstall a driver or other. I do not remember, but later the mouse worked.
After this weird thing with the mouse, I noticed that the touchpad was malfunctioning. While I write, the cursor moves without touching the touchpad, it is annoying because it makes me write bad because he is moving in the middle of writing, as I write so it's a mess.
The second oddity, the Fn + F3 does not disable the touchpad, the orange light come on (the led on the top of the touchpad), but the cursor can be moved in any case, with or without a connected mouse.
I checked for driver updates, perform an audit of the system, checked for viruses, spywares and I don't know what I could do. I don't know if the problem with the mouse had nothing to do with the function Fn + F3 problem.
I have not formatted or re installed windows 7, never.
In Device Manager I have this:
-mouse and other pointing devices:-Compatible PS/2 mouse
Help, please. Thank you.
DOH! Problem between Chair and keyboard...
C:\dell\drivers\R289237
Run the executable file of Synaptics.
Download of extracts only the program on your disk. You must manually install the driver for the Synaptics touchpad with its own executable.
FN + F3 now disables =)
-
I have an iPhone SE
my iTunes is on my laptop HP addition running Windows Vista. (32 bit not 64) It is not able to upgrade to Windows 7.
When I plug my iPhone to sync with iTunes, it gives an error message saying that I need to download the latest version of iTunes. When I try to do, I get a message saying that my iTunes is up to date with the latest version of iTunes? If my laptop is running vista only she does support the latest version? If this is the problem I wish iTunes download center say the my device does not support the latest version of iTunes. the version I currently have is the only one my device is available for download.
How to access my library iTunes other than buying a new laptop
IPhone WILL not work with Vista. It is not supported. Can't remember where I saw it, but there was something about Windows Vista not supported for iPhone SE. I'll keep looking.
Found at the bottom of the iTunes download support page. Download iTunes 12.1.3 for Windows (32 bit)
This update allows you to synchronize your iPhone *, iPad * or iPod touch with iOS 9.x and earlier on Windows XP and Windows Vista PC.
* iPhone OS and iPad Pro (9.7 inches) is not supported on Windows XP or Windows Vista.
-
I am trying to use a function in SharePoint to allow me to open a library in explore mode. The function is available on the page sharing, and when I select the function my browser Internet Explorer stops working. Unfortunately, IE to its current configuration on my system is required for most internal applications. Chrome will not allow most of the functions in the share Point site, as well as the browser is unusable in my case. Search the current potential resolution to my problem is to run a 32-bit browser to activate my service. Because of the above mentioned limits I have need of a 32-bit version of Firefox, but the download only provides a version 64-bit because my system is 64-bit. How can I get a 32-bit version of Firefox?
Hi dstibbards, firefox on windows versions are always 32-bit applications so far, so I don't think it will be the problem...
-
My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3.2 on my iPhone. Any help for this problem?
Sync with iTunes on a Mac or a PC requires:
- Mac OS X v10.8.5 or later
- PC: Windows 7 or later
- iTunes 12.3 or later (free download from www.itunes.com/download)
iTunes too old and too old osx to support necessary to have iTunes, you will need to update osx to update iTunes to work
Maybe you are looking for
-
The appearance of each site is not fair. The problem is solved in the safe browsing.
-
Compaq Presario SR1214NX desktop PC: update BIOS for SATA HDD?
Hi CV Experts. In 2004, I bought a HP Compaq Presario SR1214NX desktop PC. Now, leave the original hard drive and I bought a new Seagate 500 GB SATA hard drive. I thought that this would work because the PC MoBo has two SATA connectors. After install
-
Satellite P300 - Windows Live Messenger System Crash
Hello I recently bought a Toshiba P300 that works great except for one thing: Windows Live Messenger completely blocks my computer. I tried the latest version of 2009, version 8.1, and even the version 7.5 and every time it's the same thing: I correc
-
HP Pavillion DV6-2180EL drivers missing
Hello I tried to find the drivers for DV6-2180EL, but in the software/drivers for laptop on the home page, a missing link. I used this link: http://h10025.www1.hp.com/ewfrf/wc/product?product=4105377&lc=it&cc=it&dlc=it&lang=it&cc=it and if I use anot
-
Trying to make iPod and iPhone update but get message not connected to the internet
trying to update my ipod and I phone but I keep getting a message that I am not connected to the internet, but my browser works well ideas