64 bit window 8 drivers

Similar Questions

• 64-bit windows 7 drivers for Dell Inspiron 15 R 5537

  Please give me the link for 64-bit windows 7 drivers for Dell Inspiron 15 R 5537

  Simple PCI 1 communication controller)

  CRW - USB 2.0 2)

  Contoller video 3)

  http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-15R-5537 looks like you need to install the Chipset drivers that must be installed before anything else. It is not installed first, other drivers will not install correctly. Make a list of your hardware Manager devices to check that you actually material. He must choose the right ones for your configuration. Some drivers listed may be for you do not have the hardware.

• Satellite C55-B1079 - 32-bit Windows 8 drivers needed

  How can I download drivers for windows 8 (X 86)

  TNX

  There is no 32-bit drivers of Windows 8 for Satellite C55-B1079 PSKTWV-01D00LAR

  On the page of the Toshiba UE driver you can find drivers for 64-bit Windows 8.1.

  

  I recommend the use of 64-bit Windows 8.1 system because 64-bit recognizes more than 3.2 GB of RAM

• Satellite C55-A-1R8 - lack of 64-bit Windows 7 drivers

  Hi everyone, I need your help guys.
  I just bought my new Satellite C55-A-1R8, computer PSCJEE laptop with windows that I hate windows preinstalled to 8.1 and intel cpu onboard, but because n3520 8 I decided to downgrade to the thought of 64-bit windows 7 I'll find all the drivers, but the problem is that there is no driver win 7 for this model of support and I think that I already tried all the others without success.
  My usb ports does not work and I can't find the drivers, windows cannot do either.

  My missing drivers:

  Enthernet controller
  PCI encryption/decryption controller
  USB universal serial bus controller
  unknown device (properties said on processor Intel (r) Pentium (r) N and J-series / processor Intel (r) Celeron (r) N - and)

  also my bluetooth driver seems to be ok, but I'm not able to install any software of Toshiba bluetooth for win 7.

  If somehow I could sort my usb ports would be perfect.

  Guys you have ideas where good drivers?

  Thanks in advance!

  At first, I must say Hat I just hope that you have created recovery DVD or USB until you started with OS downgrade. Problem is that now after the new operating system installation you will not be able to start the installation of HARD drive recovery image and one day if you want to have the factory settings you can have a big problem.

  In any case, I m wondering really you have installed before Win7, check if this older OS is supported or not. You can try now is to install the Win7 drivers available for other models of laptops.
  Try please install follow rivers:
  Chipset Intel HM70 River (should help with USB ports)
  I put t know for sure if this wll help but try to install please follow drivers LAN and BT:
  Atheros LAN driver LAN
  Driver package Bluetooth Filter filter BT
  Bluetooth stack

  Please test and send feedback.

• Portege Z30 - A - unable to find the 64 bit Windows 7 drivers

  After installing Windows 7 64 bit I have 5 drivers that appear in Device Manager.

  PCI serial port
  PCI Simple Communications controller
  3 unknown devices

  In system information, they appear as
  ACPI\INT33A0\0
  ACPI\TOS6205\2 & DABA3FF & 2
  ACPI\TOS6208\2 & DABA3FF & 2
  USB\VID_138A & PID_0010\BA110BEC1AB5
  PCI\VEN_8086 & DV_9C3D & SUBSYS_00011179 & REV_04\...
  PCI\VEN_8086 & DV_9C3A & SUBSYS_00011179 & REV_04\...

  Hello

  Can you please tell us what model do you have exactly?
  I just want to check if Win7 64 bit drivers are available on the Toshiba download page.

  Anyway, how to identify the unknown device, you will find on this page.
  http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htm

• G2 250 HP (F0Z00EA) wireless laptop for 32-bit Windows 7 drivers

  I just upgraded my G2 to 250 HP (F0Z00EA) computer laptop windows 7 32 bit and it doesn't have the wireless drivers, please help!

  Please click here to download and install the driver, please let me know if this does not work

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• ATI Radeon 5770 + problems of 64-bit Windows 7 drivers

  I have a sapphire radeon hd 5770 and I recently installed windows 7.  When I installed the driver for my graphics card I have to reboot for it to take effect.  Once the reboot is finished, I find myself with a desktop computer that has no mouse, no icons and no taskbar.  I have to restore the system to remove the Catalyst Control Center (the pilot for the 5770).  I need the driver to install to use my graphics card but so far no luck.  I spent hours trying to solve this problem, and any help is appreciated.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can note that ATI Radeon 5770 is compatible with Windows 7. You can visit the link below to learn more on this subject.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=catalyst%20Control%20Center&v=ATI&UID=&pf=0&PI=1&s=ATI%20Radeon%205770&OS=64-bit

  If you have installed the drivers ATI Radeon 5770, could note you tell us if the drivers have been installed through Windows updates or that you downloaded from the Web site.

  If it has been downloaded from the Web site, then you must update the drivers supplied by Device Manager and check if the problem is resolved.

  You must be logged on as administrator to perform these steps.

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, locate the graphics card and then double-click the device name.

  3. click Driver tab, then click on set to update driver and follow the instructions.

  Also note that you should only download display drivers leaving behind control catalyst ATI from the link below.

  http://game.AMD.com/us-en/drivers_catalyst.aspx?p=Win7/Windows-7-32bit

  After downloading, you will need to install on your computer and check if the problem is resolved.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Pavilion DV7 64 bit: Windows 10 drivers

  I bought my laptop Pavilion in May 2011 and have just upgraded to Windows 10. Is that what I did the wrong thing? I will have problems with drivers and understand that hp do not plan to upgrade the drivers for that old machines. I have it wrong?

  Maybe hp can tell me. It is their intention that if someone uses a laptop computer that old that they should buy a new one, because if that's the case I don't buy hp! A great pity because I was very happy with my laptop to date and do not want to lose him. Is there a solution to this? I have my facts wrong? Is there something I can do? Hp have to say?

  Gordon

  Greetings,

  You can't blame HP.

  Microsoft supports upgrading to win 10. Notification of 'Get Win 10' of Microsoft, said you were good to go and you're not if HP is not to blame. Microsoft wants to install Win 10 on as many devices as possible. Installing a lot may not succeed.

  Your PC is four years old. Microsoft should provide all the necessary drivers for a good upgrade experience.

  Return to Win 7 if Microsoft cannot do its thing. It is not for lack of HP.

  Sweet if the upgrade works. Don't blame OEM failure!

  I have a PC two years have no Win 10 drivers offered by HP.

  I do not work for HP.

  Hemdani

• HP pavilion 15 n037tx windows 7 drivers

  Hi I wanted to know is - it safe to install a drivers Hp Pavilion N037tx Windows 7 I saw his driver windows 7 officially release by Hp will I have no question about ATI 8650 driver and another driver as well please answer me as soon as possible...

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to have or to purchase a copy of Windows 7 with a valid Microsoft COA and the product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '. This should clear up the CD/DVD device is missing.

  

  In addition, as the hard drive is probably partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  From the top...

  (1) turn on the computer and immediately start typing the key "ESC".

  (2) when the MENU is displayed, press "F10".

  3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

  4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

  5) press "F10" and click "YES" to "Exit Saving Changes".

  (6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

  (7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

  (8) to turn on the computer and immediately start typing the key "ESC".

  (9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

  (10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".

  11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

  (12) you may need to provide Intel SATA/RAID drivers at the moment... Download f6flpy-x 64.zip and extract the drivers to a USB Flash drive.

  (13) follow the instructions and answer all questions as required. Enter a valid Windows 7 when key requested.

  (14) Please install the 64-bit Windows 7 drivers from the page of drivers PC laptop HP Pavilion 15-n037tx.

  Driver and Intel Chipset Installation utility

  Intel USB 3.0 Host Controller Driver

  Intel Management Engine Interface (MEI) driver

  Intel Smart Connect driver technology

  Intel Rapid Storage Technology driver

  High definition (HD) of Intel Graphics Driver

  AMD graphics driver high definition (HD)

  Synaptics TouchPad Driver

  Realtek card reader driver

  Realtek LAN driver (LAN)

  Driver Audio Realtek High definition (HD)

  Please post of Device Manager "Hardware ID" (text only) for all remaining missing or unknown devices, as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Windows 8 drivers for Dell 2335dn printer/Scanner

  The compatibility for Windows 8 Dell printer to http://support.dell.com/support/topics/global.aspx/support/kcs/document?docid=572562 page shows the 2335dn compatible, but there is only some Windows 8 drivers on the driver download page for this printer.      I downloaded the 64 bit Windows 7 drivers (DELL_2335DN-MONO-LASER - MFP_A04_R302637.exe), but when I try to install, I get an error message in a window that says "this version of Windows is not supported.  Program will be terminated. »

  Where are drivers Windows 8 for the Dell 2335dn?

  I finally got this working on my computer Windows 8.1.

  First of all, download that Win7 both Win8 application installs Kiran links in this support thread.  Then, run the Setup program to install the drivers and application of Win7 which includes the scanner driver.  Finally, run the program installation to install the Win8 application and drivers, which will overwrite the binaries of Win7 and install the good printer drivers and application Win8 (although the scanner driver missing at the start of the installation of Win7).

  That leaves me with features both the scanner and the printer working on my machines from 8.1 to win!

  Hope this helps,

  SixChins

• Problems in porting windows vista 32 bit on a 64-bit Windows 7 machine device driver

  Hello

  I'm porting windows vista 32-bit on windows 7 64 bit machine printer driver. I have compiled DLLs. When I add printer and load INF file, I get the message that this driver is not compatible x 64 driver. Please tell me what adjustments should I do in the INF file.

  Thank you.

  Go to the printer manufacturer's website and download the right driver (free) for your operating system. You should also disable automatic windows update - Start, made driver installation computer right click go to the settings/settings/device installation properties / Advanced - value - not let me choose/never install updated win - save changes, remove previous attempts also to devices and printers, have the printer on but do not connect the usb cable until you are prompted - install driver downloaded.

  If there is no 64-bit Windows 7 drivers don't try the 64 bit Vista driver, if it does not work then you will need a new printer.

• Satellite L500-126 and drivers on 64-bit Windows 7

  I'm going to update my system to windows 7 64-bit, however drivers 64-bit windows 7 aren't currently available for L500-126.
  I noticed the drivers 32-bit of windows 7 are available since last week, I wonder when the win7 64 bit drivers would be ready?

  THX!

  All laptops listed on Win7 download page will build for 32 and 64 bit, and I think it's just a matter of time where the drivers will be ready for download. Maybe you should wait a few days with the Win7 installation.
  Anyway, as Feodor written you can try to use some Vista drivers.

• HP Z400: Need HP Z400 Workstation drivers for 64-bit Windows 10 Professional

  Hello

  I have HP Z400 Workstation. Windows 7 Professional came with my PC. By releasing 10 Windows I've updated.

  Now I want to reset/reformat my PC. So I need drivers for Windows Pro 64-bit 10.

  When I looked the site I've seen drivers until Windows 8.1. Windows 10 entered was not present in the menu dropdown.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=3718669

  Please tell me where can I find drivers for Windows 10 or let me know if 8.1 of Windows or Windows 7 drivers will work with Windows 10 or not?

  ankurgupta555

  I already mentioned a free driver backup/restore application: DriverBackup

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Drivers for Photosmart B210a under 64-bit Windows 8

  Does anyone know when drivers for the B210a Photosmart under 64-bit Windows 8 will be available?

  Hello

  Please check your printer from the following list:

  http://h30434.www3.HP.com/T5/Windows-8-release-preview/Windows-8-driver-information-for-LaserJet-ScanJet-and-other/m-p/1856247/highlight/true#M703

  (a) your printer IS in the list: wait, it will come.

  (b) your printer isn't in the list , you will have to wait longer and it may not come.

  Kind regards.

• The wizard of the driver NI-VISA creates drivers that are compatible with the 64-bit Windows XP/Vista version?

  The wizard of the NI-VISA driver creates drivers that are compatible with 64-bit Windows XP/Vista?

  InfiniteNothing-

  If you use a 64-bit compatible version of the NI-VISA driver, then the Assistant of the Driver NI-VISA is expected to create device drivers compatible 64-bit running in 32-bit mode.  You can find the various drivers of NI-VISA at http://joule.ni.com/nidu/cds/fn/p/sn/n23:1640/lang/en.

  Take care!