64 v29 and v26 under Win7 64-bit Firefox bit every night are so slow for broadcast, only 4% of the BW otherwise directed by sam of firefox running Win7 32 bit.

Under my Windows 7 64-bit OS, I installed the Nightly Build v28 and v29 "internet speed test" and each time, I can only achieve something < 2 Mbit/s for my home WiFi, router gateway that is subject > 56 Mbps. The only Nightly version work was v23 which could reach nearly > 52 Mbit / s. But once I upgrade to higher version v23, all speeds normal I could achieve in nocturnal v23 disappeared. The same issue also plagued firefox v26 under Win 7 64 bit.

For more information, this does not apply under Win 7 32-bit OS - the same v26 firefox works fine for pure speed of BW near and > 56 Mbps. Why not in 64-bit OS seems to be the main issue?

What is going on? I appreciate watching you in and help out me on this dilemma. Thank you!

Sincerely
My Shao

Hello Shao Ma, when using speedtest.net or a similar site based on flash to measure your speed of connection, then it could be a problem with the protected mode that adobe has implemented for its flash plugin for firefox. Some older versions of f-secure or report of trusteer are known to cause slowdowns with flash, or it could be something similar on your system that interferes (maybe security software that block/sandbox the container used for protected mode, etc...).

as a solution, you could try to disable the protected mode and see if that makes a difference.

in case you want to solve the problem more far, it would be preferable to contact adobe support and file a bug at bugbase.adobe.com report (choose 'Adobe Flash Player' as the product & 'Browser Integration' as being the product box), since they will have to better understand the inner workings of flash protected mode and therefore knows what else could be the cause of the problem you saw.

Tags: Firefox

Similar Questions

  • DAC and Informatica 8.6.1 installation and configuration under Linux (64-bit)

    Hi Vanina.

    I've seen some very good post from you regarding the installation, set-up and configuration R12, OBIEE, CAD 10.13.4, Informatica 8.6.1 on Windows. I'm looking installation and configuration Informatica and DAC on 64-bit platfrom Linux installation. I'm already running instances R12 and OBIEE on Linux 64, but we must now configure the Informatica and DAC.

    I find a few start and documentation from the web, but your expert advise and reference notes are brilliant so looking for this.

    Concerning
    -Samar-

    Samar,

    I don't have a specific document for the installation of the DAC, but I suggest the following links/docs:

    Oracle Business Intelligence Data Warehouse Administration Console Introduction
    http://download.Oracle.com/docs/CD/E12513_01/doc/index.htm

    System requirements and supported platforms Configuration Guide for Oracle Applications Business Intelligence 7.9.6.1
    http://download.Oracle.com/docs/CD/E14847_01/BIA.796/e14221.PDF

    Note: 1082987.1 - ALERT: required and set levels of Patch for Versions 10.1.3.x OBIEE
    Note: 981452.1 - INFORMATICA 8.6.1 FOR ORACLE BI APPLICATION 7.9.6.1 CONFIGURATION PROBLEM

    Thank you
    Hussein

  • I use AOL for email and Firefox 9.0.1. Problem started 2 days ago. Before that I put in the two first letters of an email address and he gave me a list of possible. Now I get "undefined" for each possible instead of the email address.

    There is no problem after updating to Firefox 9.0.1. My contact list always displays as he did before that this problem occurred. When I type the first letter or two of the email address, it used to give me a list of possible. Now t shows just as "undefined" e-mail address when he gives me suggestions for the address that I type in the invoice line. This means that instead of being able to click on my choice in the possible he gives me, I have to go to my contact list, find the name and then click on it if I send email to a person. If it passes in more ways than one, I either enter the full address or use copy and paste from the list of contacts. It is a huge hassle. Any help is appreciated.

    You use like CCleaner cleaning software?

    It is possible that there is a problem with the file that stores the data for the "saved form.

    Rename or delete the formhistory.sqlite (more formhistory.sqlite - log and formhistory.sqlite.corrupt, if they exist) in the profile folder of Firefox in the case where there is a problem with the file that stores the data for the "saved form.

    Which will remove all the data forms, so you can rename formhistory.sqlite to formhistory.sqlite.sav or move the file to another folder in case you need to retrieve recorded data.

    If that worked, then you can delete the files renamed.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • January 12, 2015, I bought and downloaded online, Adobe Acrobat XI Standard. I just had my computer re [broadcast, losing everything in the process. I need re - download Acrobat. How can I do this now?

    January 12, 2015, I bought and downloaded online, Adobe Acrobat XI Standard. I just had my computer repaired, losing everything during the process. I need re - download Acrobat. I was informed, when I bought it, if need be, I'd be able to re - download acrobat if necessary.  How can I do this?

    You can download through the following page:

    Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  • Hello team, I'm NBNCo and we trueup contract with adobe. Please let me know what all software can be downloaded and used under this contract

    Hello team, I'm NBNCo and we trueup contract with adobe. Please let me know what all software can be downloaded and used under this contract.

    Hey Ashok,

    Please contact support for details of the software, as the same cannot be provided without any detail of the Ordinance on public forums.

    Contact the customer service

    Kind regards

    Sheena

  • Why are there 2 directories for media - 1 under webroot and 1 under applications?

    Hello

    I installed FMS and we are evalauating as a streaming server.

    If I understand the documentation, all multimedia files for dissemination should be stored in this directory:

    /.../applications/VOD/media

    However, if I want the file to be available (downloadable) over http, it should be located under webroot.

    /.../Webroot/

    Now my question is, why can't I just create a symbolic link from .../webroot/media to point .../applications/vod/Media.

    In general, we would like to do each file streamable and downloadable.

    My thought is, the sym link allow us not to have to download each file in two places.

    Am I missing something?  Are there security issues?  What is the idea behind having 2 directories?  I guess that the FMS can handle streaming and downloading a file at the same time.

    Jeph

    Jay is right.

    The server has been configured with two directories, because many customers is not available for download on HTTP support. Vod/media folder is for RTMP streaming only. Other clients need their media available on HTTP and RTMP. Webroot/vod folder is for these files.

    Here's how the configuration:

    If you look at the (rootinstallationfolder/conf) fms.ini file, you will see two parameters that define the location of vod media files:

    VOD_COMMON_DIR = C:\Program Files\Adobe\Flash Media Server 3.5\webroot\vod

    VOD_DIR = C:\Program Files\Adobe\Flash Media Server 3.5\applications\vod\media

    These parameters are used in the tag in the folder rootinstallationfolder/applications/vod application.xml configuration file. They say FMS it can stream files to one of these places.

    /Webroot is the Apache Web root. The Apache httpd.conf (rootinstallationfolder\Apache2.2\conf) file defines the location of the webroot folder. Whatever under this folder can be downloaded.

    For broadcast only, put the files in the vod/media folder. For the streaming + download, put the files in the webroot/vod folder.

    HTH,

    Jody

  • ReadyBoost Windows 7 Pro 64 bit works only not with the reader flash 32 GB USB high speed...

    Hello

    I did what I could find in support.microsoft.com search/read them all using ReadyBoost on my Windows 7 Professional 64 - bit, because he seemed much more cost-effective to install a properly sized USB key from the bombings of hundreds of dollars to replace and modernize the planks of installed RAM, I, 4x2Gb @ 1066

    My basic material is:

    Intel i7 920 CPU using Gigabyte EX58 - UD3R-MOBO with 8 GB of RAM installed 1066.

    According to the info I've read ReadyBoost, the ratio is 4:1 for the size of the Flash drive compared to installed RAM or, in my case, a 32 GB USB device.

    I had the OCZ Rally2 32 GB because it tested faster about 30 GB Read and 5 to 10 MB write.

    When I go to activate the USB 32 GB for ReadyBoost flash drive, I get the "impossible... to use this device to ReadyBoost...". "error message.

    TWO QUESTIONS:

    1 knowing that my USB 32 GB current is at a speed of 31 GB read/6-10 MB write and can be replaced if necessary:

    a. y at - it a necessary range of recommended read/write speed?

    2. further, saying: the range of tested USB disk read/write speed are correct or I will get a correct drive 32 GB and with 8 GB of RAM currently installed.

    b is it? or what is the advantage in any computer processing speed using a 32 Gb USB flash drive when it is 8 GB of RAM installed (knowing that a replacement/upgrade RAM is off-budget for the foreseeable future)?

    Finally, I pass first OCZ support but received no conclusive answers.

    1st answer to yesterday 20:11

    Win7 is limited to 32 GB size by device for ReadyBoost. I've seen this problem before when the USB key is at the maximum limit. Never seen a work around so.

    AND, more interesting for me, 2nd answer:
    Today 02:37

    Few people I know with this problem that I've never heard of a solution. I don't know anyone who devoted a lot of effort as with 8 GB of memory system is not a necessity for ReadyBoost so they just moved.

    NOTE: The support guess I are underutilizing the 8 GB of RAM installed. In fact, due to the needs work I will typically have anywhere for applications and utilities operating at 20-35 someone time, using 4-6 GB of RAM at peak use.
    Ideas?  Suggestions?
    Thank you.
    John

    Hi John,.

    A flash drive may appear to meet the requirements, but Windows may detects it not as compatible ReadyBoost if its rated speed measures sequential and random performance and performance is not always quick on the set of the flash player.

    Look for a note from the manufacturer that the flash player is Compatible Windows ReadyBoost. Not all manufacturers of this list on their packaging.

    You can check with another flash drive

    Answering your questions

    a. speed for Windows ReadyBoost requirements are at least 2.5 MB per second throughput for random readings of 4 kilobytes (KB) and 1.75 MB per second throughput for 512 k random entries.

    Using memory in your storage device to speed up your computer

    (Article is for Windows 7)

    b. ReadyBoost acts as a cache of HARD disc (hard drive) and is not a replacement for direct system memory. It will not improve processing speed, but will help the launch of faster applications and push background applications that serve much in memory reserved ReadyBoost.

    For more information, please visit the links below

    Turn ReadyBoost on or off for a storage device

    Using memory in your storage device to speed up your computer

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    ---------------------------------------------------------------------------------------------------------

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Why should I remove every two or three days for correct display of the icon cache icon in Win7?

    The reason why I care about is, when I program an application with its own icon, is displayed another icon instead of the correct icon (apparently by a random selection of Windows 7). For example, the icon for Notepad, calc or MS Office Word, Excel, Powerpnt and so on... restart of the operating system function. And Windows shows wrong icon in the folder (or desktop) as "and" in the taskbar or in the window of the application.
    Anyone know what this might be caused by?
    In Win XP was not this problem and Microsoft cannot fix this in Win7, although the internet is full of it.
    Any ideas how to solve this problem of user environment (where Microsoft is not able or is lazy to solve this problem by programming) for longer than two days (or three with a bit of luck) to give advice to users of my apps how to show once for all correct icons?
    Because not all users of my application will rebuild icon cache (every two days) to detect the correct icon of my application.
    Thanks for any advice and sorry for my bad English.

    Hi Jose,

    Method 1:

    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information about how to back up the registry, see the link:

    Back up the registry

    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    I suggest refer you to the article and try to run Microsoft fix:

    Icons change incorrectly in Windows

    http://support.Microsoft.com/kb/2396571/en-us

    Method 2:

    Try to run Microsoft Safety Scanner for any spyware or malware infection.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Let us know the results.

  • Every time I have import photos high resolution and place them on my program of 12 items - they are all BLURS.

    Every time I have import photos high resolution and place them on my program of 12 items - they are all BLURS.

    12 elements makes the pictures for images in full resolution after importation and use. In your case, what is the size of the files you are importing. Once the files have been imported, can you please check their resolution from the 'Information' section on the right side, or "View file information" option on the right click context menu.

    You import these images Revel? If Yes, then you must download an original image of right-click context menu of the image.

  • Hard drive does not correctly identified under Win7 64 bit and the blocking of access to the disk.

    I use a Maxtor Ultra 16 L01F500 SATA, but Win7 (64 bit) is to identify it as a SCSI drive Maxtor L100P0. He not only identifies by mistake, but also blocks access. I get an error indicating that the location is not accessible. Under computer management, the drive is there and gives the correct size and format (NTFS - was previously my main drive until I upgraded to Win7) when we look under properties. Also, Windows shows the drive is healthy and active. Don't know what to do to get access again (I have admin access to the player thought that would help). I also ran the disk error checking and it showed no errors. You don't know why Win7 has misidentified or why it will not allow access. Any info or help would be appreciated. I can't seem to find the drivers for the drive, otherwise I would have tried that. Thanks for reading.

    In disk management, remove this disk partitions, and then create a new partition

  • LV2010 32-bit under Win7 64 bit - SCC provider not found

    Is there a work around to use a provider of Source control with LV2010 32-bit under Win7 64-bit?

    It seems that the VI 'Raspberry find all Providers.vi' does not work with the OS 64-bit due to registry access restrictions.

    The Key.vi of open registry is not able to analyse below HKey SOFTWARE but the full path is SOFTWARE\SourceCodeControlProvider\InstalledSCCProviders.

    Best regards

    Christian

    By reading this thread http://forums.ni.com/t5/LabVIEW/LabVIEW-32-bit-and-Vista-64-Registry-Read/m-p/978676#M438513 , I was able to get a work around.

    I replaced the version registry key VI opened by the ".vi ACI - WinAPI - open registry key (WOW64 support)" within raspberry NI find all the Providers.vi and now I can choose the SCC provider installed via the LabVIEW IDE-tools >-> Source code control-> configure source control.

  • How do I fix/remove registry errors and redundency in win7 64 bit

    I need assistance with directions to help me eliminate some errors of registry and redundencys and also some unnecessary files and some ghost and unnecessary services on my win7 64 bit computer.can lenovo someone help me thanks

    Hello

    If you pay attention to the registry cleaners or the system too much hype
    Optimizers don't. Think of those as oil of snake that are more likely to
    cause problems while fixing anything. If you are not likely to have the registry
    Mistakes and certainly not ghost services.

    If you experience problems with system performance using this utility
    below and ask questions in these forums on specific issues.

    ----------------------------------------------------------------------------------------------------

    Use the startup clean and other methods to try to determine the cause of and/or
    eliminate problems.

    ---------------------------------------------------------------

    References to Vista also apply to Windows 7.

    What antivirus/antispyware/security products do you have on the machine? Include
    everything you've ALWAYS had on this machine, including those you have uninstalled (they
    remains of leave behind which can cause strange problems).

    ----------------------------------------------------

    Follow these steps:

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows
    Vista or Windows 7

    http://support.Microsoft.com/kb/929135

    Use advanced tools to solve performance problems in Windows 7
    http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes without doing anything-
    then right click on taskbar - task manager - take a look at stored by -
    Process - Services - this is a quick reference (if you have a little box on)
    Lower left - show for all users, then check that).

    How to change, add or remove startup programs in Windows 7
    http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

    Is a quick check to see who are loading method 2 - using MSCONFIG
    then after a list of these here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out what files, registry keys, and other objects
    processes have open, which DLLs they have loaded and more. This unique
    powerful utility will show you even owned by each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically
    When your system boots and you connect. Autoruns also shows you the complete list
    locations of registry and files where applications can configure start automatic settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor file system, registry, process, thread and DLL
    activity in real time.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    WhatsInStartUP - free - this utility displays the list of all applications that are
    loaded automatically when Windows starts. For each application, what follows
    the information is displayed: Type of startup (registry/Startup folder), Command - Line
    Channel file, the product name, Version, company name, location in the registry or
    file system and more. It allows you to easily disable or remove unwanted programs
    that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe
    not. The window Watcher says it all, every window created by each execution of the statement
    program, if the window is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Think about it an absolute must - manually update your drivers.

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded
    on your system. For each driver in the list, additional useful information is
    Poster: load address of the driver, description, version, product name,.
    company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit Maker as replacements and system manufacturer of device which are
    the most recent. Control Panel - write - graphics card - device manager
    the brand and complete model of your video card - double click - tab of the driver-
    Note the version information. Now click on UPdate Driver (this can do nothing
    MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
    If there are 3rd party with their own software and drivers and the other main device drivers
    you have.

    Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
    and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
    their latest versions. (Look for the system to update the BIOS, Chipset and software updates
    Site of the manufacturer here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
    REBOOT after each installation.

    Always check in the Device Manager - drivers tab to be sure the version you are
    installation actually appears. This is because that some rollback of drivers before the
    later is installed (particularly that audio drivers) so install a driver - reboot.
    Make sure that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
    SCANNER - check manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using
    the above methods is preferable to ensure the latest drivers from the manufacturer of system
    and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    If you update the drivers manually, then it's a good idea to disable driver facilities
    in the updates of Windows, which leaves on Windows updates, but it will not be installed
    pilots who are generally older and cause problems. If updates provides a new
    driver then hide it (right click on it) and then go get new ones manually if
    you want.

    Stop Windows 7 to automatically install device drivers
    http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

    How to disable automatic driver Installation in Windows 7 / Vista
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
    Professional, comprehensive and Enterprise edition)
    http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

    ===========================================

    Refer to these discussions because many more excellent advice however remember to check
    your antivirus, the main drivers and BIOS update programs and also to solve problems
    with the first method cleanboot.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • DAQCard-6062E and DAQmx on Win7 64 bit

    Hello world

    I have question about 6062E map (old enough).

    We had recently updating our machine to run Win7 64 bit, because we are short of memory with other applications. Now, I have the problem, that I don't get the DAQCard-6062E installed correctly.

    First and foremost, I must admit, that I don't have a great experience with this piece of hardware and the configuration of the old machine was made by someone else (which is over here).

    Our DAQ hardware is connected via a PCMCIA adapter to our new machine, running Win7 64 bit. This adapter is recognized correctly. I was also looking for drivers for the card itself and found the driver OR DAQmx 15.5 (http://www.ni.com/download/ni-daqmx-15.5/5901/en/), which seem to be supported for Win7 - 64 bit. So I installed them. Also our device is listed as supported by the latest version of DAQmx: "DAQCard-6062E.

    However, installation of the new machine I couldn't do the 6062E be recognized correctly. Windows not wanting to find/install the drivers for this card. Also the device does not appear in the NOR Measurement & Automation Explorer.

    Unfortunately, I couldn't find any useful information on the page host OR this fact. There is a fairly old (http://forums.ni.com/t5/Multifunction-DAQ/Does-DAQcard-6062E-work-on-WINDOWS-7/m-p/1104196) discussion in the forums, but it does not help be to this specific topic.

    I would be happy if you could point me in the right place on where to find this information? Or, please let me know, what things to do/try?

    Thank you

    Peter

    The DAQCard-6062E is not supported on 64-bit Windows versions. See the section "No supported devices in NOR-DAQmx on the 64-bit Windows 8.1/7/Vista Versions" of the NOR-DAQmx 15.5 Readme.

  • Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This

    Oops... .the everything in the title... My apologies!

    Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This problem may occur when you use AMD Radeon HD 5xxx card graphics series 8xxx running versions of pilot 14.501.1003, 14.502.1014 and 15.200.1062.1004. For the Solution of the page install the AMD Catalyst 15.8 Beta Driver for Windows (posted August 31, 2015).  However, there are now a 16.1 driver... would this work with Lightroom 6buttons Photpshop CC without problem or should I stay with 15.8 beta for Windows driver (Windows 8.1.

    Thank you very much

    Paul Winstone

    Hi Paul,.

    This article was created when users have faced problem with old drivers for AMD graphics card.

    Yes, you can upgrade to the last 16.1 pilots and who should work well however, you should have 1 GB VRAM or more to take advantage of the GPU processors.

    Kind regards

    Claes

  • I bought from amazon lightroom 6 and I have win7 pro 64-bit and during the installation message appears OS not not met requirment win VISTA NOT supported

    I bought from amazon lightroom 6 and I have win7 pro 64-bit and during the installation message appears OS not not met requirment win VISTA NOT supported

    See the link below:

    https://forums.Adobe.com/thread/1836232

    The folder Lightroom 6.

    Right-click on Setup.exe and choose Properties option.

    Then click on the Compatibility tab.

    The value of the Windows 7 operating system and check.

Maybe you are looking for

  • HP Compaq 6910p touch controls no longer works...

    I installed windows 7 Home Premium 32 and also installed Snow Transformation Pack 1.5. I have used and deleted some kind of buttons 1, 2, 3, 4. I did not restore point before using it. Now, I want to use the original Windows 7 without additional exte

  • left mouse Botton does not not on my laptop

    The botton by clicking left on my laptop suddenly stop working. It does absolutely nothing when I click nothing happens I tried to go to the control panel-other currencies-mouse... but then mouse that everything seems fine so I know not what happened

  • How can I fix AMCAP?

    AMCAP does not start for me.  I have everything set up, and it does not start. Not at all.

  • WANT 810qe Office: graphics card update

    Hello One of my colleagues has just bought this machine, the Office of 810qe WANT from Costco. The link to the form: http://www.Costco.com/HP-envy-810qe-desktop-%7C-Intel-Core-I7-%7C-Blu-ray-%7C-4GB-graphics.product.1... He is planning on the upgrade

  • Context: Target cannot find the node with id 33

    Hello In my qml file, I used the spreadsheet component. When you click the button, I tried to call the RPC function that calls the web service and according to the response from the service web I have to redirect to special qml. But while qml opening