6500 a more used to printing on paper of the greeting card

Similar Questions

• OfficeJet 6500 has more will not print black - Solution

  My 6500 has more do not print black even with new cartridges.  There is instruction to Reset to solve this problem for the 6500, but reset instructions do not work on the 6500 has more.

  How to reset the 6500 has more

  Thank you

  I paid $20 to HP for this information.   They said that the secret to getting the Menu support isn't on the web for the 6500 has more printer.

  My printer has stopped printing black, even with a new black ink cartridge.  I've had the printer for the last 4 days guaranteed when this happened.  Was on my second or 3rd Xlarge black cartridge.

  Steps to fix it.

  1. remove the cartridges

  2. remove the cartridge door / carrier, lift the big lever to release him.

  3. clean the contacts of the cartridge with water and cloth.

  4. clean the contacts and all other surfaces on the Cartrdge support with water. mine has all backen up with ink - it filled the sink with black water.

  5 clean the contacts copper this interface for the cartridge door of the printer. . These were covered with of ink too.

  We then conducted cartridge alignment and it 'Fail' printer still does not work.

• Printer has paper, but the computer says that it is paper and print not web

  I have trouble getting the computer to recognize that the printer has paper. The printer prints copies that I put in, but when I want to print from the web, it doesn't let me do; He told me just the printer's paper. I printed a few pages on the web yesterday without any problem at all. I have a HP Deskjet F2430.

  just do a restore to an earlier date and which corrects the problem.

• JPEG and RAW is more displayed on my screen. even after the graphics card update

  JPEG and RAW is more displayed on my screen. even after the graphics card update

  Click on edit and click Preferences, and then choose the last option which is camera raw.

  on the camera raw preferences, in the lower window, uncheck the box use Gpu option and then restart Photoshop and try again

• OfficeJet 6500 has more: do not print officejet 6500 has more

  Hello.

  Status: Cannot print print, web pages in eith B & W or color.  I have updated driver SW, paper, ink, connectivity, computer restarted after SW update, printer reset after SW update.

  Detail: I am able to print the test page of the HP utility without problem with color.  However, when I select an email for example, the printer takes paper and seems to be the impression (movement/noise), but is released without anything printed and no error message on the device or in the printer status window.

  Help, please.

  Hi @d1m25al

  I do not know what causes these white pages, but I'd be happy to help you.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• HP 6500 has more - automatic duplex printing

  He bought for a friend, but can not get automatic duplex printing to work. Says it is installed and will allow you to do manual duplex printing! Obviously I'm not the only person who has had problems since that HP has published a directive on XP, Vista and Windows 7 (what we're missing) under the title of "double-sided printing Option is not available, even if an automatic duplex (Duplex) printing accessory is installed.

  Step 1 of this directive can be satisfied. Second stage is from another world! There is No "Features" tab on our menu and therefore we cannot continue!

  Can someone in the HP please look into this as soon as possible, because they have a very dissatisfied customer who lives about 85 miles away from me. Any help would be appreciated.

  Interestingly, even if the duplex option is installed and confirmed installed, when you go to print options and watch the finish tab - no duplex is shown?

  Concerning

  Brian Cameron

  Hi all

  This is wht I want to do:

  (1) in the printer setup menu look under the "Reports" menu and select "Printer Status Report. Once it prints look for the option "duplexer. Must say "installed".

  (2) in the computer, close all windows open as Word, Acrobat etc.

  3) double-click the icon of the printer that you see on the computer screen. Open the actions of the printer and then open "customize your printer.

  4) click on the tab "device settings". ' Here 'Both sides print' or "Duplexer" should say "Installed" or automatic "and if you see"Manual Duplex"it should read 'off '. Click on apply, and then click OK

  5) click on "Set your Preferences.

  (6) check the option "Print on both sides" or something like that. For this option, select "Flip on short edge.

  (7) also, click on the 'Advance' button and look for a reference to two back.

  (8) click on apply, and then click OK. Now try printing.

  If it solves your problem, but it prints backwards, application, click File ==> Print ==> select the printer ==>, click Properties. Here select "Flip on Long Edge" and then try to print.

  Note: Legal size paper cannot be used for duplex printing. Try again with size of letter or A4 size.

• HP Officejet 6500 has more do not print black

  I have a 6500 a more printer that does not print black. For some reason when I install the black cartridge, it works for about 2 weeks and then it stops. It shows the cartridge as full. I returned 3 black cartridges thinking the cartridges were defective clips for this reason. I don't think they'd appreciate seening me once again. I now wonder if my printer. I did also clean print heads with no luck. All done eating my ink. Color cartridges seem to be OK. I appreciate any suggestions. My printer is dying?

  Helen

  Helen

  Print early in life cartridge stoppage more likely would be a clogged vent.  See here for more information, don't forget to check the vents.  If that does not resolve the issue post here can help.

• Win7 x 64 install an Officejet 6500 has MORE. Cannot print

  Win7 x 64 install an Officejet 6500 has MORE. Printer is connected to the wireless very well. Win7 x 64 computer can ping and see the printer on the network.

  Get a message error everytime I try to print saying: "it cannot connect to the printer.

  Same computer can connect to the printer and to view and modify settings wireless very well.

  I guess it's a problem with Win7 x 64. I need to fix this before to decide to take back to Costco and exchange for the Canon I almost branch instead. HP you have always had driver problems, but still? Really!

  Has taken over the crappy HP. Picked up a Canon PIXMA MX882 instead. Impeccable installation, in 10 min I'm printing, scanning, fax wireless with not a single question.

  I am VERY disappointed with HP and its incompatibility with Win7 x 64 drivers. Don't advertise your crap software is compatible, when it is not! I lost hours of my personal time, trying to get HP to work then most of time taking the piece of crap back (I really like the hardware of the printer - software "guys really?"). I will never buy another HP printer. And on the Canon Wireless Setup was easier. A button called easy set up on top of the printer and BAM done. * beep * HP, * beep * indeed.

• HP 6500 E709a network main AIO: printer Ethernet cable to the router

  This should be a simple question. My home/office network has a router Belkin Wireless 600n. I'm not sure how to respond to the installation of the software asking how the printer is connected to the computer. I have both wireless and Ethernet wired computers on this network. I am trying to run the installation on each computer software. I'm only given two choices, USB or wireless. I think that there should be a third choice; Ethernet cable. Has anyone else encountered this problem?

  Hey @billytec,

  I understand that you run into a problem when running the network installation on your windows computer to your HP Officejet 6500 all-in-One Printer. I want to help you with this today.

  Choose the wireless network option shouldn't cause problems during the installation of your printer. It can always be detected on your network and should install without any problems at all. When it comes to your computers or wireless, which makes no difference to the way in which they communicate with your wired printer. The only requirement is that they are all on the same network.

  To make sure that you run the correct installation program, just click here. Once the site opens, select the download button at the top left. Once the download is complete, do execute the instructions on the screen to install your printer.

  Please let me know if this clears up any confusion. I wish you good luck!

• Photosmart C4795: No printing on paper of the Document

  This morning, I tried to print a black and white word document and the printer spits out just the white sheet of paper I. I assumed that the ink was out so I replaced both cartridges with new ones. Initially, the small screen on the printer told me that the ink cartridges were either not detected or they have not been installed correctly. I tried taking that regulate them and then put in that hide them and then the printer is no longer detected these issues. When the printer goes to print alignment page, he just spits the blank sheet of paper me with nothing printed on it once again. What should I do?

  Hi @jon12341,

  Thanks for getting back to me.

  Yes, I suggest that you manually clean the cartridges (if they are out of warranty), rather than replace them. If you do not often print, the print head to dry. The print head is on the cartridge, that is why I recommended that you try to manually clean the cartridges.

  I noticed that you mentioned that guaranteed the printer just missed. I believe that this printer is released in 2009, you bought this printer about a year ago?

  To my knowledge, HP does not repair consumer printer products. However, HP can offer you a discount toward a recovery on a replacement unit. Please call HP as best as possible.

  I hope this helps clear up any confusion. Thank you for joining the Forums of HP Support!

• Using of Print Production-> preview of the output to display individual departures, will result in severe display on the new iMac problems

  With the help of Print Production-> preview of the output for display in Acrobat DC 2015 separations, with separations selected/disable-selected causes strange color changes, deselected szeps sometimes do not disappear, must leave Acrobat and restarts repeatedly.  Race 2 new 27 "iMac, 10.11.3 & 10.10.5, same problems as computers, Acrobat DC is now useless for us, issues/fixes known?

  Hello

  We have today published a fix that solves the problem of the release preview which was recently introduced (with May 10 release). If you're not already updated to the latest patch, simply open Acrobat and visit help > check for updates to apply this hotfix.

  More details about this release and bug fixes is available here: help Acrobat | Release notes | DC Acrobat, Acrobat Reader DC | Update

  Please give it a try and let us know.

  Thank you

  -ashu

• HP Pavilion DV9700t - re-use of parts, any ideas? (the graphics card died)

  Hello

  I have a HP dv9700 4.5 years, who is now dead because of the board (Nvidia) of graphics about me dying and so I try to re use parts. I removed the Lightscribe optical drive and mounted in a new external use via USB. I removed the HDD of 250 GB and rose in a USB3 SATA external enclosure to use as a portable HARD drive.  Are there other ideas to re use elements of this laptop died, so that I can get maximum recovery of him? I try only to get what I can of parts that are not damaged or dead (I have spent more than $1,400 on this laptop custom and realize that I spent too much on an element of a usual duration of what, 2 years? My new laptop that I just got, was adapted by me to a much lower $ 700 price because I kept in mind the life expectancy, this time).

  Thanks for all the ideas, Debra

  The motherboard at this stage is not a recovery option.

  You already recovered the HARD and the ODD disc.

  Those are the two elements that you could get as much use of. You can remove the PCIe mini wifi module, it uses, but it may not work in other books... some work with specific cards.

  However, you can except for the keyboard and the LCD because there might be someone out there who has need of these pieces (provided that they are functional and intact in the original edition). If you want to do this, you can use the steps in this guide to remove them if you are uncomfortable with this process.

  If you have a portable computer that uses the same parts, then you could keep it as spare parts if you need in the future.

• When I try printing to a custom size greeting card, it will not fill the page

  When I try to print a greeting card custom size, I can't print to fill the page, e.g. a 5 "x 5" card is put in place as 5 "x 10" but when it prints it is an important border, have tried up to this adjustment to the page, the best fit etc but not joy.

  Thank you very much for your help, I was ready to stop trying. I used already without borders for standard maps, but was having the problem with custom sizes, but by increasing the size slightly by setting without borders in custom settings, I have now managed to print a 5 x 5 "card.

• 17 t j000 touchsmart forcing skyrim use nVida video or turn off the graphics card intel

  Hi all

  I just got this new computer and try to make it work with the game Elder Scrolls v Skyrim   the game starts and runs ok however by default is of poor quality with video intel detected 4600.   Don't want to use the video intel when even, so no matter not much.  I want to use is the video card from nVidia to 740 m.

  I went into the NVIDIA Control Panel and things together global use the nividia card, in program files, I put all the exe files of the game to use the nvidia card.   I entered skyrimprefs and sd3ddivice to change sD3DDevice = "Nvidia GeForce GT M 740" when I start the game it resets the video at the bottom and when I look at his still trying to use the card intel.  The skyrimprefs file is more written with sD3DDevice = 'Intel (R) graphics HD 4600'.

  So the question is how to get the game to work with nVidia card?  Or how to disable the card intel?

  Went into device manage and disabled the graphics card intel and skyrim can't always find the nVidia card. It uses Microsoft basic pilot to return instead.  A difference that I noticed is the base of Microsoft driver it will default the video quality of average quality rather than low quality I get with the 4600 built in processor video card.

  PROBLEM SOLVED

  I was running enb and needed to use the version of the injector instead of the version of wrapper.  the file d3d9.dll in the wrapper version forced things to use the graphics card intel.

• Why my HPavillion keep crashing when I try to print using my HP Officejet 6500 has more using the USB connection?

  I tried to update the driver, but couldn't.

  Hello

  1. do you receive any error messages?

  2 have you made any changes to the computer before the show?

  3. who is the operating system installed on the computer?

  4. is this problem limited only when connecting the printer via USB?

  5. what happens when you try to update the driver?

  Run the Fixit and perform the steps mentioned in the article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I suggest you provide more information about the issue so that we can better help you.

  I hope this helps.