6520 photoSmart all-in-one: problems of scanning HP6520

Similar Questions

• How to enable print double-sided on 6520 photosmart all-in-one

  How to enable duplex printing on 6520 photosmart all in one running on windows 7

  The Photosmart 6520 support automatic duplex printing.

  You can follow the penlow stes to set duplex printing:

  http://support.HP.com/us-en/document/c03476083

  Shlomi

• HP Photosmart all-in-one C309a: need help Urgent! -HP Photosmart all-in-one problem C309a Incompatible cartridge - 564 and 862

  Hello everyone.

  I am a happy user of HP Photosmart all-in-one printer and for many years never had a problem.  I always bought new 862 cartridges and it worked fine.  Recently, a friend brought me to Singapore two new series of cartridges, but the owner of the store said this is the new higher capacity cartridges.  I said why not?  Even better, in fact since the printer is a guzzler of ink!

  This is, because I tried to install these new cartridges, I always get the message "Incompatible cartridge" after what, I can't not access the printer.

  Can someone help me solve this problem?  The cartridges are exactly the same, so I suspect its something to do with the chip?  I tried all possible methods such as the re-installation of the cartridges, remove the carriage and re-setup, cleaning the cartridge chip, etc.

  Since I'm brought this printer back from China to Europe, I really need to solve this problem otherwise I'm stuck without a printer.  These cartridges are not available locally.

  I would be grateful any advice!  Thank you.

  Your printer can use cartridges of 864. Unless you call HP and have them reset the printer to your new country, you live. Only then these cartridges can be used if you can find them on the spot. Call HP.

• 6520 photosmart all-in-one

  Photosmart 6520 will not print my card envelopes. They are 5 3/4 x 3/8/4.  You another is4 size 3/8 x 5 3/4. When I print the larger size, I got the messsage that book does not match even if I properly checked envelope format. I spoke with HP support five different times to fix this problem. I finally learned today by technology there is no custom size available for this envelope. Does anyone have suggestions for this problem. I do a lot of graphics on my envelopes for homebound and need it works.

  Did not work. I get a new printer HP Officejet Pro 8600 Plus e all in one printer. Thanks for trying to help.

• 6520 photosmart all-in-one: can't get Photosmart 6520 to print in black and white only reliable

  I'm trying to get the 6520 Photosmart of HP all-in-one to print only in black and white. I followed the instructions in the manual (go to the preferences of the printer by selecting "Black ink" only 'Print in grayscale,' hit 'Apply' and 'Send'.)

  Now, if I do a table in the word processor Open Office and fill the cells with different colors, they print in black and white. Bonus. This is what I want. However ... When I print a page of Open Office spreadsheet (the ultimate goal), there are all the cells, printed in color of life.

  That is what it is? How can I fix?

  Afternoon @MSWS,.

  I can help you with the printing settings in Open Office.

  It seems that this program has its own options that can bypass the default print settings.

  I found this page of support which may help you with the settings. OpenOffice - control print  

  Thank you

• photosmart all-in-one problems 5200 impression with the new Dell running windows 8.1

  have a photosmart C5280 All-in-one I used with a computer that is running windows XP, it worked fine. Bought a new computer running windows 8.1, printer don't print very well at all. It prints the page after page, one or two lines of hyroglifics tile view deleted I canceled the print document to stop using paper. I uninstalled the printer software and reinstalled from website of HP software to run with windows 8.1 still does not work.

  I think it made me print again. I had to uninstall the full features software and loaded the driver only. I could not full features software to load completely, then I loaded the driver only and it seems to work okay thanks for the help.

• PSC 2410 photosmart all-in-one PROBLEM

  Hello, hoping someone can help me with this...

  I have a problem with my printer (psc 2410 all in one)

  During a simple formulation document printing, the printer ran out of paper and could not continue printing paper had been completed. I checked for paper jams - there is no. The print job has been cancelled and the printer and turned it over.

  From the market, it seems now stuck - the power button flashing continuously and the display only I get is the 'busy' hourglass icon... no other error messages or beeps. I can hear the printer through movements start, the flow of paper moving and then he seems hang somewhere and made a repetitive thud. This noise stops after about 1 minute and the display and flashing remain.

  I tried the hard reset several times, I even left it the day after. I noticed that the USB cable, jumped, but the printer also shows online on the computer... I tried to a maintenance operation, but he is not letting all through all print jobs. It's happened a few times when starting upwards, but apparently not however resolve no chance this week.

  Any help is greatly appreciated.

  Thank you

  Sam

  The operating system is Windows XP

  Hi samanthapson2,

  Have you thought about upgrading your printer for a newer model. Here is some information that will help you get into a new printer.

  HP trade-in program

  Please contact our technical support at the 800-474-6836. Customer support can also help you to get a new printer. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• 5510 alignment Photosmart all-in-one problem

  I just bought this new machine. However, when I was initially set up the alignment, the printed page was distorted on one side. The scanner has worked with this alignment page, however, all the following impressions spread on the side which is very annoying, as if the document were misplaced in the paper tray. I tried to re-alignment several times, but still can not solve the problem... Someone has an idea how to fix the flaw? Thank you!!!

  A frustrated new user...

  clean the contacts of the cartridge. Unplug the power cable while the printer is turned on.  turn on the printer, then install the cartridge when it prompts on the screen. If it still does not. Press the setup button > tool > clean cartridge. If still not resolved. to manually move the carriage and check if there's blocking if necessary, clean and try again.

• 6520 PHOTOSMART ALL-IN-ONE: EJECTS THE SHEET EXTRA VIRGIN

  Whenever I have print anything, it ejects always an extra white page later.  He did until I went Windows 8.1, and she always does since I've upgraded to Windows 10.  Is it a setting I can adjust or malfunction?  Thank you for your time and your help.

  Hi @MrsTigercat,

  Welcome to the Forums of HP Support!

  I understand that you are having problems with your printer HP Photosmart 6520, printing a blank sheet of paper extra printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you had this problem in Windows 8.1, before the upgrade to Windows 10. It is usually the result of a software conflict or a damaged printer driver.

  To correct this problem try the steps in this guide: HP printers - year Extra Virgin Page print (Windows).

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Photosmart all-in-one 7525: last scan software necessary for iMac running ElCapitan

  I can't activate my HP utility on my mac analysis. I can not scan from my printer on my mac with message that says: it is not connected. He told me to go the Web site and download the latest drivers which I did and installed v12.34.44. I've also updated my imac in updates. Still not able to activate the analysis.

  I can print from my mac to the printer that is not the issue. The issue has to do with the sweep.

  If anyone out there has a solution I'd love to know. Thank you

  Hello

  Follow the steps below, the same procedure applies for El Capitan:

  http://support.HP.com/us-en/document/c05270318

  Note: if HP Scan is set in the Applications folder, be sure to move to the trash and empty the trash.

  Kind regards

  Shlomi

• Printing problems with Photosmart HP 6520 e-all-in-one on a Mac

  Hello!

  I just successfully saved and connected via WiFi to my new HP Photosmart 6520 e-all-in-one pritner. I even printed the page alignment and test successfully.

  When I tried to print documents in Word, Adobe PDF and TextEdit, the same result occurs each time. The first page that prints a text on my Mac such as:

  %! PS-Adobe - 3.0
  % APL_DSC_Encoding: UTF8
  % APLProducer: (Version 10.8.2 (build 12 c 60)

  And then many many many blank pages start printing after that. WHAT GIVES!

  I use a MacBook Pro with OSX Version 10.8.2 and tried to restart my printer and computer several times without success. Any help with this would be much appreciated!

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• 6520 HP all-in-one: PRINT SCAN to PC

  New PC (HP Pavilion); print wireless without problem, but cannot scan the docs from the printer to the PC. Can someone help me? The printer is a HP photosmart 6520. Thank you!

  Hi MaryW,

  Try following the steps described in this document.  http://support.HP.com/us-en/product/HP-Photosmart-6520-e-all-in-one-printer-series/5169038/model/5169040/document/c03478505/

  It offers several different methods of scanning.

  If you are still having trouble post back with the details and I'll try to help!
  Jean

• HP photosmart all-in-one C2780: installation problem

  I have a printer HP photosmart all-in-one C2780

  You download the software and drivers for this printer on HP site

  When I start the installation of the software from starting the program after that extraction does not work and a message appears saying:

  Microsoft Visual C++ Runtime Library

  Runtime error

  Program C\users\FALVES\Appdata\Local\Temp\7zS1B01\Setup.exe

  This application has requested the execution to terminate in an unusual way.

  For more information, contact the application support tema.

  I ask?

  How can I contact the Support team

  What's wrong

  How can I solve this problem

  Ok

  Knowing that you use antivirus software can help to understand it better, it will be great if you can clarify that.

  So, try the following steps in the meantime:

  1. Click on the Start menu and type %temp%
  2. Open the listed temp folder, and then open the HP folder that begins with 7z.
  3. Open the UTIL folder.
  4. Open the folder of the CCC.
  5. Double-click on the file Uninstall_L4.bat

  A prompt should appear and several unisntallers should run, if only a black window appears, click enter once.

  Follow the steps of screen on until the uninstall ask to reboot the PC.

  Reboot it and try to reinstall the software.

  If it persists, remember to specify accordingly.

  Shlomi

• Photosmart all-in-one wireless B109n - problem with detection of the cartridges

  I just bought a Photosmart all-in-one wireless B109n. implementation proceeded without problems (including printing test photo).

  When I tried to use it later, he said that the cartridges were not detected.
  Strange thing is that when I take one of 4 cartridges, it says that one is missing. After you have added the last of them, he says that none of them are detected.

  Also, I need to re - enter the language and area whenever I turn it on. As if it's reset instead of make a cut...

  How this can be solved?

  Back to the store where I got it.

  They saw the same thing I had met and gave me a new without much fuzz

  The new works very well

• How to get windows 7 to scan from my HP Photosmart All In One? He's used to, now it will be not - says not detected to scan. Please help in simple language.

  My HP Photosmart all the one used for direct scanning to my computer which has Windows 7. He went offline and now works fine. But now Windows Fax Scan & custom ' work. My computer guard says that a scanner is not detected. Please help I'm not very good at this stuff! Thank you!!!

  Review HP support site, or use diagnoses of HP, a shortcut to that would probably be on your desktop (if you installed according to the instructions from HP, their cd and does not just plug the printer)

  http://WWW8.HP.com/UK/en/support-drivers.html