655 HP cartridges are reusable?

Hello! I have a HP multifunctional 3525 seen 655 cartridges. These cartridges are refillable?

Hi gdvlad,

It might work for a while, but in the long term, the printer will have also a lot of questions. I wouldn't recommend do you so... but its your wish...

Thank you

concerning

Aneesh

-Say 'Thank you' by clicking on the star of congratulations in the post helped you.
-Please indicate the position that solved your problem as "acceptable Solution".

Tags: HP Printers

Similar Questions

  • my printer cannot print black ink and cartridges are all brand new

    my printer doesn't print black ink and cartridges are all new... any suggestions how to solve this problem?

    See the solution in this post.  Be sure to check the vents, as described in a link in this post.

  • CP1215 reports that all of the color ink cartridges are empty

    HP CP1215 reports that all of the color ink cartridges are empty, but they were rarely used, the BLACK toner then indicates 72%, all three color inks report 0%.

    Hello

    Thanks for the post.  It's weird, there's a way to go beyond this message, I have included a link below with the explanation and why this happens.  Good luck!

    http://support.HP.com/us-en/document/c01905250

    http://support.HP.com/us-en/document/c01788825

  • D7360 does not print in "Black Only", unless the color cartridges are also not empty

    I try to print a document in grayscale mode with Photosmart D7360 printer.

    In the Print Setup dialog explicitly checks the possibility of using 'Black Print Cartridge Only'.

    The printer refuses to print, in saying:

    «The following ink cartridges are empty: Light Cyan.» Replace the ink cartridges to resume printing.

    "The printer doesn't have enough ink to ensure printer health. Empty ink cartridges need to be replaced to resume. »

    This means that even if it does not use the color cartridges, each of them must be non-empty when the printer is in operation?

    Yaro says:

    Thanks Zacabeb!
  • printer will work if the color cartridges are ink

    I have an Officejet 4620. My computer says all the ink cartridges are out of ink. I can always print in black. I need to replace the color cartridges?   The printer uses individual cartridges for red, blue and yellow cartridges. Color will be printed in blue and yellow only, so I guess there is little color left.

    I usually do not need color copies and I have another Copier.

    Hello @Connsu,

    Welcome to the Forums of HP Support!

    I would like to help you today with your color cartridge application today. Because your printer uses four cartridges: HP 564 black, HP 564 Cyan, Magenta 564 HP and HP 564 yellow, if one or all of these color cartridges are exhausted replace them to continue using the printer. Your HP Officejets ink system is designed to print when have all ink cartridges. A little ink in each cartridge is used for maintenance and maintenance tasks completed by your printer to keep the print head system in your printer in good working order.

    The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the printhead is not able to perform regular maintenance, due to depleted cartridges, there is a chance that the mechanism of the print head gets dirty. If the printhead is damaged in any way a whole unit replacement may be necessary. For more information about using ink please click here.

    In the future, if you mainly print in black from the computer, you can set your printer driver to use black ink only. Normally when you print from your computer files will be sent to your printer as "images". If your printer "thinks" it prints an image file that ink color will be used to enrich the black ink. If you don't want that to happen, you can enable grayscale printing option.

    • How to set grayscale in Windows:
    1. Click on the Start menu
    2. Click on devices and printers
    3. Right click on your printer and select Printing Options
    4. Click on features or Advanced
    5. Select the Grayscale dropdown and replace Black Ink only
    6. Click apply and OK

    If you ever want to print in color that you just open the document to print, click Properties in the print dialog box and change black ink only on OFF. This setting only will change to print one job and will return to black ink only for future jobs.

    • How to set levels of gray on Mac:
    1. In the software application, click print
    2. Select your printer
    3. Click Paper Type/quality menu
    4. Click the triangle next to Color Options
    5. In the color menu, select Grayscale or black & white
    6. Select the printing black only ink cartridge
    7. Click print

    Please let me know if the information provided solves your color cartridge problems. I look forward to hear from you!

  • Print fades before one or more cartridges are empty

    I have a HP Photosmart Premium C309a.  My computer operating system is Windows XP.

    Without warning my bland impression.  I have check the cartridges.  Sometimes, it is obvious that a cartridge should be replaced, but mostly it's not obvious.  I can not restore print until ALL cartridges are replaced even if it is obvious that we have a lower level of ink than others.

    More recently the black print faded to close unexpectedly.  I checked the cartridges.  The black of the photo was low (and I rarely use this printer/copier to print photos) so I replaced it.  All other cartridges show at least half full or better.  Still no black printing.  So I replaced the other black ink cartridge.  Still no black printing.  I guess if I go out and spend $100 or more for a new set of cartridges that my impression is restored.  If I do, that will make it 3 times that I had to do - basically as far as I can tell I'm throwing cartridges which should always be functional.  I downloaded the doctor print and Scan and he tells me that everything is fine.  If I print a test page for this diagnostic tool more I test printed other tools help pages and help depending on what tool I use me either to get a white or black page without a photo is missing.

    My last attempt to solve this issue is to uninstall and reinstall the printer.  If this does not work I will abandon hope and replace this all-in-one.  I am very disappointed because when it works it is wonderful.  But when it does not work I get no warning and it costs too much to get my feel back.

    Someone else meets it?  is there anything else I should have done, and I'm not?  Thanks for any help.

    So I went shopping for a new printer and that's when I discovered that this problem of cartridge seems to stretch on at least another brand.  A person writes a review on another brand of printer called a program 'passive income '.  No matter that all but one of the cartridges is full.  If your printer decides that a cartridge is low, all cartridges must be replaced in order to print correctly again.  It's about $100 bucks on the C309a.

    Ok.  I wanted an answer and I have one.  There is no support or troubleshooting this problem.  Just go buy 5 cartridges new if they are out of ink or not, and're you good to go.

  • OfficeJet 4635 cancel the firmware update because my ink cartridges are for older versions of the product

    I was happy with my officejet 4635 until I clicked on ok to apply for the HP firmware update. He said that it would improve my printer. However, demand has not said that my ink cartridges may not work if I installed the update. I clicked on ok and the update has been successfully installed. Now I can't print anything because I get an error message saying the I have ink cartridges are designed for older versions of the product. I do not use the new HP cartridges because they cost too much. I used cartridges refilled abacus in Az. Phhoenix which worked fine up until I did the update of the firmware of HP. I need to go back to the old system, so I can print again. I am connected to a desktop computer HP envy running windows 8.1. I'm furious HP to try and force you to buy their new cartridges with an update of something. I think that whoever came up with this update should be fired. Any help with a solution would be appreciated.

    I was told that there is no way to undo the update of the firmware. HP did send me a few ink cartridges so I could print again, but I am still ticked about the way this has been ensured by HP. They have not told me that my old version cartridges would not more work after updating firmware. I think that it is simply dishonest on part of HP and I am sure that other customers have been captured by this update of the firmware. I am sure it was a HP effort going to force you to use their new cartridges. I'll be very careful on the acceptance of the updates from HP in the future.

  • Photosmart 7520: implemented on 7520 refurbished cartridges are not excepted by the printer.

    the cartridge with the bowtie icon has no configuration of Word under number of cartridge as the other cartridges, which is why the message on the printer screen says "use the provided INSTALLATION with your printer cartridges"? I already took each cartridge and several times and the above message always appears. Should I come back just this printer remanufactured to Amazon or is it possible to have the implementation of the replaced ink cartridges?

    Hello

    Contact the retailer the printer requires installation cartridge because it has not been initialized, which was included in his original box and must be provided by the retailer to complete the configuration of the printer, the ink cartridges are marked as configuration on its labels, so you were not provided with such a

    The following document address such:

    http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer/5199461/model/5199462/document/c03107170

    Shlomi

  • HP Officejet J4580 all-in-One: where the printer cartridges are located

    Where are the cartridges of printers that are located on the HP Oficejet J4580 all-in-One printer

    The ink cartridges are located inside the printer. Go here... http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645099/manuals download the User Guide and read page 10 for see where.

  • HOW can I FIND THE CARTRIDGES ARE EMPTY AND that it FAULT REPLACE HP printer fax C309 using windows 7

    HOW can I FIND THE CARTRIDGES ARE EMPTY AND that it FAULT REPLACE HP printer fax C309 using windows 7

    Hello

    Please use one of the following methods:

    http://support.HP.com/us-en/document/c00257147

    Kind regards.

  • HP photosmart c6180 all-in-one: does not print because some cartridges are empty

    I want to just print in black and white, but because some of my color cartridges are empty it does not print.  If I don't want to use the color why is it important?  Please notify.  I can't afford a new set of cartridges of color... and I don't want to print in color, so it shouldn't matter!

    Hello

    To protect against damage, it will not stop if no available in any ink cartridge. I need all the inks in the heating of the process.

    Kind regards.

  • My HP C4750 sat unused for two years. Both new cartridges are so-called 'Print cartridge error': help!

    My HP C4750 wireless and wireless has worked on occasion, so I used a different printer and let sit unused HP two years.  Now I need to use it, now using a cable to my computer laptop, bought two new ink cartridges and show 'print cartridge error.  It cannot read ink levels that should be 100% of new cartridges. I really think that the cartridges are inserted correctly.  Wonder if something is dried up inside? Help please!

    Troubleshooting steps described in this document can help solve your problem.  Be sure to clean the contacts of the cartridge and printer as shown in the second Solution.

  • My printer epson stylus cx7800 blank paper prints. Cartridges are full

    It is as if printing correctly, however the documents come out in white! cartridges are full and everythings shows it should work.

    My guess would be that you need to clean the heads.

    http://files.support.Epson.com/htmldocs/cx78__/cx78__ug/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Epson&file=maint.htm#wp1021512

    John

  • All-in-one HP Photosmart C310a: "True HP" cartridges are NOT SUSTAINABLE

    I use a HP Photosmart Premium C310a series all-in - one.I also use ONLY HP #564 ink cartridges. I do basically all my printing in grayscale, which I suppose is only black ink. I don't have one of the other cartridges replaced since the receipt of alerts "low ink" on them, awhile ago, I never print in color.

    My problem is that the black ink cartridges are not sustainable. I recently replaced the larger of the 2 black inks in January. Since then, I have only printed perhaps 25 pages. Now, it's as if it is empty.

    It shows low on ink diagnosis, however, when I run a report of print quality, it shows full. I ran a report of alignment (failure) and cleaning cartridges (doesn't give me an option of 'yes' or 'no' as shown in the troubleshooting guide)

    Before replacing the cartridge in January, I cleaned the print head / contacts as the same thing happening.

    I REALLY want to replace the whole print head, but also can't keep replacing a new cartridge about 25 pages.

    ANY SUGGESTIONS?

    Hi orkaydl,

    You are welcome!

    Please consider marking 2 Message like "Accept as Solution" If you thought that my post has been useful in any case.

    Best regards!

  • How can I use HP 2605DN printer black when color toner cartridges are empty?

    Is there a way I can use my 2605DN strictly as a printer laser black when all or part of the color toner cartridges are empty?  I like the quality of the HP 2605DN and works 99% of my black print.  Thanks for your help.  John O.

    You must change the option replace supplies of "stop out" to "ignore the.

    Go to the printer and use the buttons to select as follows:

    the system configuration->-> supplies to replace print quality

    Change to "stop out" to "ignore the.

Maybe you are looking for

  • Lack of easy configurations/FF ProRes. parameters

    I recently did a fresh install of FCP 7 on my MacPro. I upgraded to final cut PRO 7.0.3 I have FCP X installed (but it settles into its own Applications folder) I copied and recopied the settings of Applications / Final Cut Pro extra easy configurati

  • Get rid of Conduit search

    Whenever I update of Firefox, I am infected with Conduit search. It happened just update to 29 on my laptop and desktop. Getting rid of it is not as easy as to suggest answers in the forum, but I he would avoid rather than keep removing it. Does anyo

  • How to get back to my default went recently to the sites when I click on the new tab?

    You see, I downloaded kind of something which changed the squares which showed what I... went in front. (Sometimes just recently, but it registers itself it.) I don't mind.) Now it shows Yahoo. And I don't want Yahoo NOT showing when I click New tab.

  • Error 7 when opening the file auto-LabVIEW 2010

    I use Open/create/replace file in LabVIEW 2010 to open a text file.  It works fine until I have compile the code.  Then, I get error 7. I tried the paths that are similar to the following, but no doesn't work. c:\\file.txt c:\\file.txt c:\------\file

  • try to install itunes and get the error code 3220

    says something for with mobile can anyone help me solve this please