660 GTX with CC 2014

Hello

I've updated the CC 2014 first, and now I can't use the GPU acceleration because first said my 660 GTX is not certified.

Given that my graphics card, I bought less than 2 months ago, it's a bit annoying, especially since I was looking forward to the new CC 2014.

Are there opportunities to see the 660 certified in the near future?

Thank you

Cédric.

I "solved" the problem by adding the model of my card to the cuda_supported_cards.txt and it worked.

I must say that it is strange because my card was not in this file for the previous version of the CC, but the first didn't complain at the time.

Tags: Premiere

Similar Questions

  • 660 GTX work well with trace of ray rendering in AE cs6

    I use my 660 GTX for CUDA with the GPU makes the site below

    http://www.studio1productions.com/articles/PremiereCS5.htm#Note_1

    The only problem I have is rendered Ray trace does not seem to work in after effect Norbert I swap the preview in prefrences CPU. Also, I get an error on this subject at the launch of the effect. Screen attached.

    Does anyone have a solution?

    http://img689.imageshack.us/img689/7371/capturenjq.jpg

    I am running Windows 8 64 and CS6 master collection

    And my card is

    http://www.Newegg.com/product/product.aspx?item=N82E16814125443

    Test the traced the beam 3D rendering engine and GeForce GTX 660

    http://translate.Google.com/translate?SL=ru&TL=en&Prev=_T&hl=en&ie=UTF-8&EOTF=1&u=http://w ww.efxi.ru/more/after_effects_cs6_raytracer.html

    5070: 0 error: for video Kepler (6xx) install update Adobe After Effects CS6 11.0.1 update.

  • 660 GTX will fit in HPE h8 - 1360t?

    I am concerned about the clearances in the case. Currently, he has the small 630 GT, the only option when I bought, that does not cut it, serious inconsistency with the i7 - 3770K for Flight Simulatr X (and most of the other games too, I guess). Opted for the 600W PSU, should be good enough here. Any other suggestions welcome Nvidia also, but no Ti cards.

    TIA,

    JBarrow

    And the answer is Yes, the 660 GTX will fit. POWER supply 600W I opted for has enough juice, the card is more than I expected, in terms of performance. Always nice when that happens to be precise, the map is the Superclocked EVGA GeForce GTX 660.

  • 660 GTX not recognized on Windows 8

    Original title: Win8 vs graphics card

    Hello
    My 660 GTX does not work at Win8 but 9500gt (older) works very well. It recognizes automaticlly of (older) graphics card, but when I put new nop... just 640 resolution and when I move the mouse I see blurry letters... Graphics (both) works with Win Xp without any problem. Can it be BIOS? I see this problem only with this Win8...

    I found a problem. It was connected with my ram. I don't know why, but windows 8 see a problem with the connection between gtx660 and my ram, so I just removed a ram and left then. Works. Time to buy ddr3 and the new motherboard ^^ problem solved

  • Not compatible with Labview 2014 IMAQ?

    I try to work with a National Instruments / SuperDroid Robots SD6 ( https://decibel.ni.com/content/docs/DOC-18528 ) now... Everyting connects fine using LabVIEW 2014 with the module of Robotics with the exception of the functionality of the camera. When you use the solutions provided LabVIEW cannot find dependencies IMAQ.

    I checked to make sure that I have the module installed and I see IMAQ 4.9 and IMAQdx 4.3.5 MAX

    Check the newsletter below on the compatibility of the IMAQ, she only has not 2014 listed

    http://digital.NI.com/public.nsf/allkb/DB928F6D5E9D6B97862579A7006B2850

    Specifically, I need the 2014 Image processing module version in the link below. The download link says 2013 and during the installation process, I don't see an option for support for 2014.

    http://www.NI.com/gate/GB/GB_EVALTLKTSIGPROC/us

    Is there a trial version of this software that is compatible with LabVIEW 2014?

    I was able to get in touch with a sales engineer and I need to image processing module is not yet available for LabVIEW 2014. Where my question.

  • Replacement 760ti GTX with GTX 970 in an R2 of Alienware X 51?

    Just did a little research, and from what I can tell the reference GTX 970 and 760ti share the same exact dimensions in length and depth; and use less power at idle and supported; and it gives off less heat.

    Does anyone know if there will be complications with my GTX with a GTX 970 760ti replacement?

    Hello

    So, I also want to put an EVGA gtx 970 in my 51 r2 x. The new alienware x 51 r2s, even with the power supply 330 watts, being supplied with gtx 960s. These require a minimum of 400w, but alienware are themselves uncomfortable with selling them with the new x51s. So I think a 970 should work okay, if you have the 330w PSU. I read a lot of testimony that the x 51 r2s supports the 970 s and same years 980, but I don't want you may have a 980. So I guess I'm torn between 960 and 970

  • 2014.0 CC InDesign does not recognize plugins built with CC 2014.0 SDK on Mac

    Hi all

    I build plugins for InDesign CC 2015.4 using CC 2015.4 SDK and they worked very well on Mac. I used Xcode version 7.3.1 (7 1014) and I have OSX 10.8 SDK copied from an earlier version of Xcode and displayed it in the list of Xcode 7.3.1 Base SDK. But when I compile the same plugins with the same version of Xcode, but with CC 2014.0 SDK InDesign CC 2014.0 then displays this alert at startup:

    'Adobe InDesign does not recognize MyPlugin.InDesignPlugin' as a plug-in. Please reinstall the MyPlugin.InDesignPlugin"plugin and restart InDesign. »

    The bad news is that the same message that I get even though I build plugins like BasicDialog or BasicPanel SDK sample. Don't know if this is related to the minor changes that I did in the projects in the sample and make to compile.

    When I open any project SDK sample and try to build it I get error:

    "ld: file not found: @executable_path/InDesignModel.framework/Versions/A/InDesignModel for x86_64 architecture.

    to resolve this issue, I added 'InDesignModel.framework' of ' < SDK-folder > / build/mac/release_cocoa64/packagefolder/contents/macos "to"Binary link with libraries"list

    After that, I get another error:

    "Undefined symbols for x86_64 architecture:

    "_objc_readClassPair", referenced from:

    __ARCLite__load() in libarclite_macosx.a (arclike.o).

    to fix this, I changed implicitly "link Objective - C Runtime option supported" the 'yes' to 'No' as suggested here:

    The undefined symbols: "_objc_readClassPair" when o... | Apple Developer Forums

    I changed this option in my plugins CC2015.4 too and CC2015.4 InDesign loaded this plugins very well.

    After these changes plugin built successfully, but when I copy this plugin in the folder "/ Applications / Adobe InDesign CC 2014/Plug-Ins/SDK ' then InDesign displays alerts above.

    Anyone has idea what Miss me? Thank you very much!

    Hi vadim Pachaev,.

    According to the SDK, you will need to use Xcode 5.0.1.

    Markus

  • My co-editor in Chief is the CC 2015 but computer science from the University, I am using is stuck with CC 2014. Help!

    Hey Adobe Community People.

    My co-editor is CC 2015 (working in another State), but the University computer I use is stuck with CC 2014. I checked with our IT Department and they say that the school license is not set to renew until August, so we're stuck with this version until then. Am I supposed to twiddle my thumbs for the next two months? My editor and I share projects every day so this is a huge setback.

    Is there is workaround for this backward incompatibility dilemma? I don't know about XML, but that it only works with sequences, or can it many projects? Must reinstall everything 2014 and just redo the whole of his work?

    I buy my own darn computer and pay for 2015 for CC?

    These ^ ^ ^ are all the solutions... but I wonder if there is a simpler, which don't make me to re-do work or pay for the Crack of Adobe (I mean cloud creative).

    Also, Adobe, you are makes it very difficult for me to contact support by phone. I am disappointed in your absence on the customer service... it is also just a rant on my frustration with the incompatibility of these annual updates of the CC.

    Help!

    Sincerely,

    Frustrated. (My real name is Brian... and I'm not usually this unpleasant)

    This isn't his right - the whole concept of the subscription model is up-to-date new revisions are released.  You should talk to Adobe - I've provided contact information in my answer.

  • We have a problem with a freshly installed with CC 2014 and Acrobat Pro DC - Mac whenever we click on the output preview tool, Acrobat Pro DC instantly crashes. It occurs without worrying that press ready PDF we open. Help, please!

    We have a problem with a freshly installed with CC 2014 and Acrobat Pro DC - Mac whenever we click on the output preview tool, Acrobat Pro DC instantly crashes. It occurs without worrying that press ready PDF we open. I tried to delete the folder/Library/Application Support / Adobe, but without success. the App said CC DC Pro Acrobat is installed, but the uninstall option is grayed out (I thought back to Acrobat Pro XI, but I can't do it yet). We use a local server to send updates of Adobe software, which could be the reason. Ideas accepted with gratitude as to how we can get insight into the output works again!

    Known issue for PDF files that have an output RGB mode.

    Version update of the software that will be released next month with the fix.

    -Dov

  • Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

    Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

    Hello.

    Today, I had the opportunity to work with a user of Muse with the same problem after you perform the troubleshooting steps in the post above we decided to communicate with the host.

    Later, I learned to know that host IP of the user of Muse and they managed to unlock and muse began to connect to the FTP host.

    I have another host scenario suggests Muse to add user : 21 to the FTP address and then Muse was able to connect.

    For example ftp.domain.com:21

    Please try the suggestion 2 above and let me know if it works.

    Concerning

    Vivek

  • What is the command key to trash preferences start with CC 2014?

    What is the command key to trash preferences start with CC 2014?

    Thank you.

    Hello

    • To restore default preferences settings, hold down Alt (Windows) or Option (Mac OS) during the startup of the application. You can release the Alt or Option key pressed when the splash screen is displayed.
    • To restore default preferences settings and the plugin cache at the same time, hold down the Shift - Alt (Windows) or shift-Option (Mac OS) during the startup of the application. Release the keys Shift - Alt or shift-Option key when the splash screen is displayed.

    Visit the below help page for more information

    Adobe Premiere Pro help. Preferences

    Thank you

    Mohd Naseem.

  • With photoshop 2014 cc 2.0 in edit, fill, pattern, script, I get only 6 options. Trees and executives have disappeared.

    With photoshop 2014 cc 2.0 in edit, fill, pattern, script, I get only 6 options. Trees and executives have disappeared and I only get the filling of symmetry, filling of brick, cross weave, place along the path, random fill and spiral. This is normal or is my corrupted photoshop version?

    options are passed to the FILTER - RENDERED

  • 660 GTX to my hpe-112y

    OK, so I'm wondering if this card would work with my computer here are its specs

    http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-660/specifications

    This is the power supply im planning on getting

    http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=7906002&CATID=1079

    and finally here is my profile

    http://www.CNET.com/products/HP-Pavilion-elite-HPE-112y/specs/

    in any case if none of the parties do not work with my computer thoes pls tell me and possibly give me a recommendation on what maps and power to use, I want to be able to play most of the games in high or ultra with fall of small frame.  in any case thank you for taking the time to read this!

    Hello

    Consult this publication of the article.  Open your PC and a few measure ensure that the graphics card will adjust. While the PC is open, measure the distance between the power supply and the optical drive.  Feeding you are considering is 1.6 "longer. It compress the space between the power supply and the optical drive, making it very tight wiring and may bend the cables too.  I suggest that you consider the CX600 Corsair or CS650m they match better is physical size with the existing power supply.

    The NVIDIA GTX 660 is a map of excellent graphics for PCs that have a legacy BIOS.  The new higher level cards will not run in your PC.

    If you are not sure that the NVIDIA GTX 660 has sufficient performance, then try one or more game simulators that are available on the internet.

    These articles HOWTO HPshould be useful.

    The processor and the existing memory should be enough for most modern games.

  • X 51 starts, the potential problems of 660 GTX.

    Computer is only a few days old - Alienware x51.
    
    First thing I did was install the drivers recommended to me from the dell site after entering my service tag and OS - Windows 8 64bit. The video card driver that dell told me to install was 307.07.
    
    The next day, whilst playing a game, the screen froze and became covered in blue squares before restarting. Upon restart during the bios loading, the screen is covered in horizontal blue lines. Once bios loading has finished and windows starts trying to load the screen goes black and my monitor does not recognise my computer even though when i unplug the VGA it knows that is is unplugged. The computer will remain on with the screen black until I hold down the power button. Monitor and cable are running fine. this happened each time i tried to start the computer. After leaving it be for a few hours it turned on normally again. Thinking it was an overheating or a driver issue with my gtx 660 I installed a gpu temp program - Temps reached mid 70C during intense gaming. I also then went to the nvidia site and updated to the latest gtx 60 driver - 310.90 instead of 307.07. Around this point after installing some new apps etc i started to get constant blue screens, either - driver verifier detected violation or unexpected kernal mode trap. After removing my 3rd party anti virus and settling with windows defender this somewhat remedied the blue screen problem.
    
    I then ran a video card stress test from the dell site. Part way through the test the screen froze with blue (and yellow/red) squares, requiring a restart. upon restart the screen had the same blue line on it and would not start. after a few goes it eventually did.
    
    Then during a skype video call I had the screen freeze with the blue squares again before restarting itself. The blue lines appear on start up again during the bios load before the screen going black. This has stayed this way and i have not been able to turn it on.
    
    I turned the computer on and through holding F8 navigated my way to restoring my system using the alienrespawn in order the restore my pc to how it was when it was sent to me (without the drivers I installed).
    
    However, this did not work and i still can not turn the computer on as the blue lines appear and the screen still goes black .
    
    Additionally, now I cant enter safe mode as I need to finish setting up windows (entering country and email etc like I had to when I first turned it on).
    
    I have waited half a day and the same still happens - during bios load horizontal blue lines. after bios load screen goes black, computer stays on, requires forced shut down.
    
    I have emailed tech support and am waiting on their response also.
    
    Intel Core i7-3770 3.4GHz, 8GB (2 X 4GB) Dual Channel DDR3 up to 1600MHz, 1.5GB GDDR5 NVIDIA GeForce GTX 660, 1TB SATA 3Gb/s (7,200RPM) 32MB Cache, Windows 8, 64-bit, English.
    

    I had the GPU replaced, and haven had any problems since.

    My theory as to why the first GPU did not work, it's that the fan would not increase to cool. So when I played a demanding game it has overheated and fried.

    I am using MSI afterburner with the new GPU, to set a more conservative fan speed and keep it cool.

  • Satellite l.660-106 with Windows 7 has stopped booting upward

    My l.660 was for a long time, yesterday, during which he downloaded the updates of Windows.

    This morning, it wouldn't boot. Unfortunately, I have not prepared recovery disc and do not have the disc of Windows 7 computer was purchased with the system pre-installed.

    What can I do to get it working again?

    Try please start the laptop with F8 on startup to enter advanced startup options. Start Notepad in safe mode and open the System Restore tool and try to roll back OS day or two back in the hope that this will help.

    If this isn't the case, send feedback.

Maybe you are looking for

  • Air currents

    My thunderbird will not load any of the other records as drafts or sent it will load only inbox

  • Satellite A500 - Live Linux CD stops

    Stop the 'initramfs' cd and a line before "occupied zone not found ATS...". Someone has an idea without another CD because I need it, I thank.

  • Main LAN port fails to connect to the internet when the secondary LAN is connected

    I work as a system administrator, we use windows server 2008r2 in a server with 2 ibm x3100m4 cards.1st lan port uses for external access and internet with a static ip address, second port uses for internal server and access the applications only, tw

  • Purchase WINDOWS XP PROFESSIONAL CD-ROM

    Where can I get the CD above, I'm trying to implement the capabilities of fax and I miss placed the CD, with the instructions on it. Can you help me please? My computer is: MICROSOFT WINDOWS XP PROFESSIONAL, VERSION 2002, SERVICE PACK 3 Original titl

  • network controller and PCI device?

    Cannot find the controller PCI device for my hp 2000-2116tu with windows 7 ultimate (32 bit) and network