6600 printer all-in-one is offline and wont print wireless from laptop

My 6600 not connected wireless all in one printer shows offline will not print from my computer laptop (Windows 8) worked all the way until last week, that he just decided to stop printing

Hello

Please download and run the HP print and Scan Doctor www.hp.com/go/tools

Kind regards
Jabzi

Help the community by marking this post.
Your question has been answered? Mark it as a accepted Solution!
See a great post? Give it a Bravo!
I work for HP

Tags: HP Printers

Similar Questions

  • all-in-one Officejet 6310: officejet 610 all-in-one in offline and don't watch does not reinstall in windows 8

    I have a Wondows 8.1 and a printer portable all-in-one officejet 6310.  I have my printer installed and works fine on my laptop, but out of the blue one day that the printer will be offline and restarting the computer and printer does not correct.  I've uninstalled and reinstalled the computer many times - this helps for about a week before it disconnects again.

    Now when I uninstall my laptop says there is no printer in range and lists no printer for me to install.  When I tried to manually in my printer - doesn't say that there is no such printer available.  Any suggestions?  Apparently this ONLY happens to me on my computer and not someone else in the home on their laptops - we have a total of 4 laptops in the House all on the same router and using the same printer.  Oh how I feel like a fool with windows 8.  Someone at - it helps or good suggestions for me? PLEASE? !!

    Don't worry, it happens to the best of us. I recently became very angry because my iPad was not charging, the end came unplugged from the wall charger! Laughing out loud

    This problem can be caused by outdated closed ware, contradictory I.P within the router, etc. I have worked on a Thread revolving around Windows 8.1 for awhile, check it out for some possible future troubleshooting operations.

    There are steps to add the printer a way, assign a static IP, check that some updates are installed by Microsoft, etc.

    Missing/partial prints & printer offline on Windows 8/8.1<>

  • HP OfficeJet 6600 e all in one on Windows Server 2008 R2 Enterprise

    I try to get an e HP OfficeJet 6600 network all in one to run on Windows Server 2008 R2 Enterprise. I downloaded the package, which is supposed to work on Windows 2008 x 64. The package is called
    OJ6600_Basicx64_1315.exe. When I run it it tells me that it is not compatible with my system. I tried to unzip the file (changed the zip extension) but told me that it is not a zip file. Is there a driver for this printer on that server?

    Thank you

    I thought about it. I copied the CD to the server and just ran the add printer. Installed just fine.

  • Re: How to do a reset on an Officejet 6600 e-all-in-one C155A

    I can't use the screen touch because it allways says, missing or doesn't have a printhead with the installation catriages in, and it will not identify new catriages.

    Hello @bk85,

    Welcome to the Forums of HP Support!

    I understand that you get the message "Missing or has no print head" on the front panel of your HP Officejet 6600 e-all-in-one printer. I want to offer my help now to resolve this error message. Now, you specify in your message that you get this error message while using the configuration of your printer cartridges. If your printer has never been used before you need to use cartridges Setup to initialize the print head system in your printer. However, if you have used the HP Officejet 6600 in the past with cartridges installation, you can use new cartridges without problem in your machine. In saying this, the print head message you get refers to the part that the cartridges will fit. The printhead "reads" the cartridges and put the ink on the page. If the print head is defective in your printer, new cartridges will not solve this problem. On the contrary, a replacement of the entire unit may be needed as the print head is a non-replaceable element in your printer.

    Can I have it please click here to access the troubleshooting step designed to resolve this error message. If the error persists after completing a replacement printer reset would be necessary. If you need a replacement, I highly recommend contact our telephone Support queue to explore the additional hardware options.

    HP Technical Support can be reached at the: 800-474-6836.

    If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    Worldwide contact HP

    Please let me know if the reset solves the printhead error you receive. Good luck!

  • HP 4630 all-in-one: install hp4630... print wireless from iPad... Unable to print from the laptop? All ideas

    Installed new hp4630 printer all in one... can print wireless from my iPad, but I can't print from my laptop?
    Recently upgraded to windows 10. Any ideas? I'm not very computer.

    Hello Tommyboy2,

    Welcome to the HP Forums.

    I see that you experience a problem when you try to print from your computer.

    Have you installed the software/driver for Windows 10?  If this isn't the case, please click on the following link for the e-all-in-one HP Officejet 4630 Printer series full feature software and drivers.

    Please let me know if you see messages or error codes on your computer or printer when you try to print.

    Thanks for your time.

    See you soon,.

  • all my contacts look offline, and they are not

    all my contacts look offline, and they are not

    Hello

    1. on what program or an application you are facing this problem?
    2 How long have you been faced with this problem?
    3 did you recent hardware or software changes to your computer before this problem?

    Please refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:
    http://support.Microsoft.com/kb/555375

  • HP 20-f394 all-in - One PC stops and restarts itself

    If you are looking for a 20 HP - f394 all-in-One PC crashes and restarts, you will see many users have reported this problem and gave the PC low rating because of this problem. Is - this hardware problem or a bug? The HP noticed this popular issue and found a solution? I think to ask the warranty.

    Hello again driveway88,

    I have a HP support document: HP all-in - One PC desktop - computer starts up but the monitor screen remains blank (Windows 8) which was designed to help computers HP all-in-one with the question of running to a white screen that you can try.

    Please feel free to re-post if you need extra support and I'd be happy to help you any way I can. Thanks again for the display on the HP Forums. Have a great day!

  • How to print wireless from my Iphone?

    I bought a new HP Officejet 6500 has more and he says I can print wireless from my iphone. Yet, I must find a way to do it. I find available wireless networks, but how the hell do I print from the phone to the printer?

    Hello

    Please use it to check and fix:

    http://www.Apple.com/support/iPhone/Assistant/AirPrint/

    Kind regards.

  • My Officejet 6500 more suddenly stopped printing wirelessly from my iPad 2

    After working perfectly for several months, my 6500Plus HP E710n Officejet-z does not print wireless from my iPad2 or my iPhone 4 s. I use version 5.0.1 on these devices and had used this version before that the printing problem. I get the following message: "Officejet 6500 E710n-z [11E2A9] the printer is no longer available." The printer works fine (without thread) of my MacBook Pro in OS X 10.6.8 version. I "think" that there was an update from HP before it started, but I'm not sure of the timing. Any ideas on how I can get these mobile devices wireless print again?

    What router?  Reboot the router by pulling its plug momentarily.

    If this does not work, we will set an IP address of the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the gateway.
    -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
    -Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    After that, you will have to redo 'Add printer' using the new IP address.

  • 1300 printer all-in-one: 1300 all-in-one is offline now

    I have been using a series 1300 printer all-in-one and had no problems until I changed the ink cartridges. Now the printer is offline and I could not get it online. There is no that print a test sheet any...

    I've updated the driver. Help!

    Is your printer PSC 1310 the page that is the alignment page printing, it must be loaded on the scanner and the hurry scan as described in p. 33 of the guide of the user here.

  • Want to 4500 printer all-in-one: new software and drivers for HP Envy 4500

    Hello, I bought this printer on 1 October and installed on my laptop Windows 10. My question is I noticed there was a series of printer e-all-in-one HP ENVY 4500 full feature software and drivers, version 32.3, filename: EN4500_198.exe which was released on November 12, 2015. Should I download and install this because I've had since October 2015 printer? If so do I have to do something after the installation to keep my printer working correctly on my WIFI wireless? Thanks in advance for any help that I couldn't find out how call HP to ask this question.

    Thank you very much for your answer! I finally understood how do I know what version of the software and the drivers, I have this morning and I don't have the version more recent and even I was wondering about. Thanks again and have a great Thanksgiving action!

  • All-in-one DeskJet 4625 and printing with Mac OS 10.9 Maverick

    I just installed Maverick - Mac OS 10.9 - and print is no longer a device all-in-one DeskJet 4625.  The computer and the device are communicate since I can see the ink levels, scanner and other functions, but it will not be printed.  I know that there is no problem with the printer, since I can print to it from another computer that has installed Mac OS 10.8.  Apparently, there is a need for an update of the printer driver.  Apple support is not an updated driver.  So, my question is hp will provide an updated driver?  And when?

    Hello

    Apple provide a updated driver.

    First restart your Mac, then click on the Apple icon and select software update, do not forget to install any available HP or Apple updates.

    If you can't print, try installing the package from the link below and check if this is useful, although it does not list the Mavericks, it should work on the operating system as well:

    http://support.Apple.com/kb/dl907

    Shlomi

  • Printer all in one HP3520 - how to select the wireless network and enter the WEP key?

    According to print my wireless network is detected.

    How to connect the! @# % printer $ fo the wireless network and enter the WEP key?

    Instructions on the HP site tell me to selet NETWORK on the printer control panel.  Well, there's a way to select the NETWORK from the control panel.  It is not an option for him.

    I downnloaded and installed the latest drivers.

    I have restored the default settings.

    How to select the wireless network and enter the WEP key?

    All of HP's instructions seem to be for a newer printer with a touchscreen.

    I want that the printer is connected to my main computer via the USB port.  I want to be able to print wireless phones and tablets.

    My 3520 is not a 'touch Screen' and it has wifi.

    However, the following work:

    Try to open the HP Deskjet 3520 icon, open the utilities tab, click on convert USB wireless, by following the steps on the screen.

    This leads me to believe that ONLY the wireless doesn't work.  I know now that the part of the sentence "Convert USB to wireless connection" is supposed to mean "works like USB and wireless.

    Thank you for your help

  • HP Office Jet J4680C All In One is offline now

    Original title: printer offline

    Our printer HP Office Jet J4680C All In One is currently offline. Have checked all the connections and made the troubleshooting steps and we are still unable to print? Help!

    Hi Wally,

    1 have. what troubleshooting measures you tried?

    2. did you of recent changes on the system?

    I suggest you to try the steps in the following article and see if that helps.
    Printer in Windows problems

    You can read the following article and check.
    The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer

    See also:

    Why can I not print?

    Hope this information is useful.

  • HP C309a all-in-One go offline at random

    Hello

    A user I support reported intermittent but frequent problems with this printer it will 'offline' at random.

    The scenario is: Vista 64 - bit laptop communicates wirelessly with a WRT54G Router.  Connunicates C309a ALSO with the WRT54G wireless.  The protocol used is WEP.  Assign an IP address to the laptop and C309a is currently via DHCP from the router.  The laptop has the latest HP software installed.

    (BTW, your desktop Mac communicates wirelessly with this Bluetooth C309a and never no problem, but do not know if have bluetooth activated on the C309a for Mac at the same time having IP enabled for the WRT54G wireless may be causing problems.)

    I studied dozens and dozens of messages through many forums on this problem and many solutions are available, but often the wire is hijacked and goes off-topic, or the original poster responds never return whether or not the presented solution effectively resolved the problem.  I haven't met a single thread that seems to nail down this problem resolutely.

    However, what makes the most sense to me, and that most of the notice seems to be centered around, assign a static IP address to the C309a because it loses an address assigned by DHCP as the C309a will "sleep".  I know how to proceed with a WRT54G - since the WRT54G doesn't the ability of static IP address reservation, you assign a fixed IP address on the C309a itself, outside the range of the server DHCP WRT54G assignment.

    But before that, I have a few questions.  I need to understand what is happening when the 309 a goes to sleep:

    (1) the router down the IP of his table?

    (2) when the user submits something to print and the C309a is in sleep mode, what sequence of events occur to wake him up?

    (3) if it DHCP assign a new address because of sleep, why wouldn't he just assign the IP address as last time?  It is a very small network with few devices, and they are always on - not like you have all these devices on and off the network.

    Other discussions focused on firewall issues, but I don't see how this could be the cause this behavior 'offline' intermittent.  With a firewall, if I'm wrong, you don't get intermittent behavior like that - be communicates or is not until you have opened the necessary ports.

    If there is anything else that comes to mind that I should check, please let me know.

    Thanks for any help on this.

    I have the same problem, or so I thought until I discovered that it is only with my Windows 7 PC, my other PC is a HP Netbook XP/Ubuntu and Windows XP. It seems that the version of the 140.0.14.18 HP Solution Center has reported that he could not communicate with the printer C309a on the PC Windows 7 However simultaneously of the XP PC no problems. After a multitude of reinstalling the HP utility I would still lose connection after a day or two.

    My c309a is connected to my unique and accessible via Bluetooth wireless local area network so that we can print directly from our cell phones.

    The solution was very simple, taking the printer off kept the connected Windows 7 PC energy-saving mode. I hope that HP will fix this annoyance bit.

Maybe you are looking for