66610f Pavilion: Pavilion p6610f motherboard

Similar Questions

• Two monitors of Pavilion P6610f

  A previous post on this topic left unanswered question of the user.    I have a Pavilion p6610f product #BM417AA #ABA.  Given that this machine has both a output VGA AND DVI output, it is possible to have TWO monitors (working simultaneously) provided that a monitor is analog (VGA) and the other monitor is digital (DVI)?  I didn't "want to go to the load of the material, if only one of the two monitors can be used at a time.  Thank you.

  The chipset on the motherboard is able to handle two monitors. And I found this on the motherboard page: http://support.hp.com/us-en/document/c02560084

  Integrated graphics: concomitant use of DVI and VGA ports is supported.

  So, Yes, it seems to support the two ports.
  

• Dual monitor on HP Pavilion p6610f

  I would use two monitors on my HP Pavilion p6610f desktop computer.  I have two lcd monitors.   I buy a vga adapter digital and connected a monitor to the VGA in the back of the computer and plugged the adapter connected to the other lcd screen in the digital output on the back of the computer. The monitor connected to the digital output signals no signal.

  Can I use a Setup dual monitor on a pavilion p6610f using video output that is on the motherboard, or do I need an additional video card?

  Thank you

  cardsinstl

  Hello

  The monitor which does not have a DVI port?  What make and model of the monitor does not work?

  Sending a digital signal to an analog monitor won't work.

• Office Pavilion p6610f HP says: use SATA0 or 1, but HD is in Port 11 should I go back and change?

  HP Desktop Pavilion p6610f 64bits just installed new refurbished Hard Drive No. OS and yet I followed all the steps in the tutorial of HP, but one thing I didn't notice at first was that HP is said to use the smaller ports numbered disc hard SATA Seagate SATA HD shows that it is in the drive of 1st in the BIOS and when I checked for the SATA port There was just the USB ports, I assumed they were the same, but the only ports connected on 11 were the mouse and the keyboard on the 6 & 7 and a mass on the 11 port storage device (that is the hard drive?)  If it's the hard drive, do I go back and unplug something and put it in the USB port 0 and port 1? I had so many problems with the computer from another installed a faulty? hard drive, after the failure of the original, and I just wanted to be sure I did well, and it would be so good sail once I install my Diska recovery and follow other steps suggested by hP.  I guess I'll let it start and see what happens. (I'm on a right of the laptop next to my office right now)  It said to restart with the appropriate boot device.  I guess I should put in the first disc of recovery means turn the computer off then turn it back on again.

  My hard drive installation was a success and now, after installation program recovery discs and 100's of updates Windows and updates of the HP driver, everything seems to work very well.  The hard drive is intalled in port 1 and there is no noise as if it was with the previous replacement hard drive.  But things are still running much slower than they were before the crash.   I disabled elements start and removed many unnecessary programs and don't have not download all of my old library backup files in order to preserve the memory. I will buy and install several memory cards, a mink, update the BIOS Hardware Diagnostic test and hope that somewhere along the line, I will not solve the problem.  I consider this case closed and I thank all those who have posted to give me a helping hand.  Taylor

• Pavilion p6610f Desktop Hard Drive will not be reset to zero when you restart

  HP Pavilion p6610f than Desktop PC Windows 7 Home Premium 64 bit HDD (I think) could not restart. There was no indication of a problem before me by clicking on the button restart. I have this sometimes just to clarify things, looks like things work better. When it restarted, it went to a screen with 2 choices 'launch start repair or load normally. I chose startup repair. He loaded some files & drivers but finally comes to the screen 'blue '. I tried to start the computer with all the 'F' keys, none worked, always came back to the blue screen. Tried to start the recovery discs I did, same thing. I started with the ERD that I did it. Same thing. Would not not even go to Safe Mode. Nothing. But, there is no prior problems. Nothing made me think that I should do something to deal with a disaster. Then a "friend of a friend" came and replaced the hard 'for free' drive and installed windows 8 (which I hate) and now the computer makes a ticking noise and a sound plaintive, as when there is a bad DVD in the drive, it work so now slow, freezes, takes internet forever and made so much noise I think it's going to explode. I think I should replace the hard drive with the "right" and then use my recovery disks. He said that windows 8 was just too big of an OS for the hard drive, it took, that is why it is slow. But couldn't I erase or reformat the hard disk, and then use my recovery disks. As it is, I have no HP software on the computer more.  Is there a way to get the data from my old hard drive? I'm willing to take the time to learn how to do all this by myself if I knew that this is possible and if it is useful? [edited font color and characters]

  Hello Ty965,

  I understand that you fell on some hard drive problems and a friend of a friend installed a former player for you and since he turned slowly and noisily. Personally, I recommend that you buy a new hard drive and then review and follow the instructions on the HP Support document: performing a recovery of HP (Windows 7) system, which will guide you through the recovery process and get your computer back operational.

  If you don't have the recovery discs for your computer you can buy them for a cheap price of HP Media software and the drivercommand.

  I hope that I have addressed the issue to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Pavilion P6610f Desktop Tower a ticking noise, can turn back be opened while still running?

  HP Pavilion p6610f desktop win 8 64 bit since my hard drive has failed and a friend of a friend installed another hard drive and insisted on the fact that I install Win 8 instead of 7, (I hate Win 8), there is a click inside the tower and I also hear something that seems to hold the bike to the top then then down every few seconds, the ticking is almost every second. I checked the power that I knew how. Configuration and System Device Manager and it says disk hard does not work properly and is no need for an updated driver. But everything is so slow and things don't work a lot of the time, the internet will not load or merely far sometimes but convenience store network says it is connected and functional. I sometimes can't features to not work the control panel.  I tried the diagnosis of memory in the administration settings, but it wouldn't work. Before I could get my Win 7 backup files on Win 8, PC showed that I had 220 GB of 232 GB memory left possible on the replacement hard drive. I have 4 GB of Ram on a 16 possible and I thought shoud get more. I was just wondering can I have the back off the coast of the Tower during its execution so that I can see that actually the sounds before investing in another hard drive and memory cards? I'm so unhappy with my computer that I love even more to use it and I used to stay on 10 to 16 hours a day.  I don't have microsoft nhave word more and I miss the fonts that he used and for a reason that these fonts are missing off the coast of my e-mail program when they were there before the failure and the loss of MS Word IE fonts. Sorry so long winded. Taylor

  Taylor,

  No long-term, just percise. Liked it.

  (1) you can observe with the box to open, but get a grounding strap. (for example).

  (2) If you want to WIN 7 64 bit, see here

  (3) memory is available here (2 PCs 4 GB)

  (4) MS Office Starter 2010 is still free.

• Pavilion p6610f Desktop: software blocking Wifi transmission

  Pavilion p6610f Desktop 64 bit Win 7 Home Premium SP1.  I had problems with the buffering and freezing in my browsing on the internet. I contacted my Internet provider after doing all the clean to the top of my computer that I knew how to do. After an hour or two with the agent to remote access to my computer and them telling me that everything was going well at their end, I asked why the icon Wifi in my taskbar shows only two bars on a possible 5 when my computer is right next to my Wifi modem? I was told it was probably a software interfering with the Wifi transmission.  I ran Microsoft malware and adware programs removal & Ms. Mr. Fixit.  I have MS Security Essentials and have not all problem reports.  My provider Internet telling me the truth?  Is the lack of Wifi reception with software that I can't find? I looked in my programs & features and does not see all unauthorized programs may have snuck in and I deleted some. The only thing that is new is a HP Envy 5660 all-in-one that is set up wireless.  It has been suggested that I have reformat my hard drive and reinstall the essential programs to see if that helps. But, acckkKKK!  I don't want to go through all that again! I did twice before and have installed two others had readers since I've owned this computer and don't want to if not necessary!  I thank in advance for your time and your knowledge if you decide to advise me.

  Hi there @TY965

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are getting a signal strength wireless low, despite the close proximity. I'm happy to help you with this.

  In some respects, being too close could be part of the problem. Because of the arrangement of the devices, it could be that the receiver on your desktop does not receive a clear signal, due to the metal in its framework. I suggest moving the router wireless in the location and see if you can get a better signal. This page has also some other useful information which may affect the strength of the signal.

  How to get a better Wireless Signal and reduce interference of wireless network - howtogeek.com

  If that does not help or make a difference, then you can try looking at your system itself. Start with the next page, and if there is no improvement, wok your way through the other sections, I have included, until it is resolved.

  Troubleshooting your wireless network and Internet access (Windows 7)

  Focus on the management of feeding your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  I hope that this help and if anything here solved your problem, please mark this message as a solution.

• Pavilion P6610f MV417AA #ABA: MODEL PAVILION P6610F BM417AA with ALVORIX-GL8E motherboard and AMD 785 chipset does support UEFI

  I just plugged a 4 TB WD external hard drive.  NOT too much computer.  NEED HELP!  The computer display as free of 3.63 to 3.63 TB properties.  It was just plug n play set up - I did nothing besides plug it.  I think that it is in the MBR format.  I really don't know about the MBR vs. GPT and how the drive must be formatted, but I understand that the motherboard must support UEFI if I change to TPG and I still want to add MBR for a starting System.  I'm so confused.  Help, please.

  Hello

  I see that your question is a question of HP.  Too much misleading information.

  Thanks for posting on the forum.

• Pavilion S5610y motherboard

  My HP desktop computer crashed today. The motherboard is shot and it is a fairly new computer. The repairman told me to contact HP, because there is a known issue with desktop Pavilion. Hp website has information that the company knows that this is a common problem. My serial number is between people identified by HP as after having been sold with the defective part. There is information on the site that HP shipped advice of mother of replacement for consumers with serial numbers in the range of manufacture on my desk. An hour on the phone with customer service was sterile and I was told that if he didn't plant in 2013, I was out of luck. So I paid for it, I think it's inexcusable. HP knows she sold these and they do not work... It does not matter that he was not in the year of the manufacturer's warranty. I bought a lot of HP products over the past decades. I bought a lot of hp printers and still spend $60 or more per month on the printer ink. I can assure you after this experience, I will never buy a product hp of any kind again nor will be my business or my husbands business. I am very disappointed that I would be sold an office with a very substandard faulty motherboard and this company will do nothing to correct their error.

  Thank you very much. I had better customer service here than in the call center. I had almost finished, making the taxes not only myself, but other members of the family. I have a week and a half to three months of work to do before the 15th. It is the root of my frustration. I was contacted today and advised that flags are more like net jobs books and must be powered off often to refresh. I had no idea that I have not bought a desktop computer that can handle personal and business part time use. Thanks again for the shipping of my problem. Any resolution is impossible before my tax deadlines, but I at least have a way to get it fixed and will not lose as much money.

• Pavilion dv7 - 1243cl: Pavilion dv7 Motherboard resistance question

  I accidentally lost a resistance by repairing JBK00 LA - 4091P Rev my girlfriend 1A motherboard in his laptop hp Pavilion dv7 - 1243cl!

  None of the experts know the ohm value of resistance R610?

  Below, I've included a photo where the missing resistance belongs.

  Any help would be DEEPLY appreciated!

  

  I thought about it, so I thought I'd post the answer just in case someone else has the same problem in the future.

  R611 = 0.1 Ω

  R610 = 0.1 Ω

• HP Pavilion dv7-6c63nr: PAvilion dv7 motherboard replacement

  Hello

  I've had my HP Pavilion stored long. A few days ago I tried to turn it on: when I plugged in the charger and the Power button, it turned on for a second but a spark came out of the base of the laptop and recognized this classic a smell of burning plastic. No matter what I did, the laptop does not start or respond to a door.

  After watching carefully and research, I came to the conclusion that the motherboard has been damaged in sévery (he had burned).

  I was wondering how much it cost me to get a replacementet for the motherboard, or if it can be fixed. I know this laptop is a bit old, but it's a great model and brand new and I want to know if it is reasonable to make it work again.

  Thank you!

  Hello @Marceloed6,

  Welcome to the Forums of HP Support!

  I stumbled upon your post on the issue with the motherboard and wanted to help!

  If you are comfortable with the process, you can try to replace the system board using the following guide: HP Pavilion dv7 Notebook PC - Maintenance and Service of Guide

  (Chapter 4, Page 81-85).

  You can get the parts from here: HP parts store

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP Pavilion a6519fh: HP Pavilion a6519fh motherboard update

  Hello, I have a HP Pavilion a6519fh PC with a dead card mother IPIBL-LB (Benicia) - form factor Micro ATX 24.4X24.4cm before replacing with that I would like to know if someone has upgraded to a new mobo that I can replace the old?

  I have a 400w power supply, an Intel core 2 duo E6700 processor and a graphics card GT 640 that were on the old mobo that I hope that I can still use. Thanks for any advice.

  If I were you, I would buy one of these motherboards in ebay.  Because the computer is more than 7 years old, I would not spend too much money on it.  Buy the original motherboard can assure that it will work without problem.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Pavilion DV7: Motherboard fried

  So, earlier, I garguillo on a Pavilion DV7. It was a good experience, and I loved it. But after that, it just stopped working. When I took my local maintenance shop, they said that the motherboard has been fried.

  I'd love to go back to the game on my DV7, as it was an extreme judgment to my PC now. Is it possible that someone could tell me how much it would cost to get it fixed, or if it is even possible to it have stretched / replaced?

  Thanks a ton!

  Very well. I'll do it when I get home today. Thank you!

• How to install a replacement on my HP Pavilion p5357c motherboard?

  I need to replace a faulty motherboard (like many of those who have bought with this pc motherboard) with the same brand and type of origin. The computer is a HP Pavilion p5357c and I find a way extravagant different information.

  What is the exact error that you only had/get? Have you tried different data and records of power cables or a new power supply?

  Many have suggested it is questions m/b, but most are resolved by replacing the HARD drive. Mothers only I know who may have known problems related to undetected drives are the HP/Pegatron M2N78 - LA series. Overheating possible and/or "cold welding" on the chipset.

  Other motherboards that may have problems are the N-Alvorix-RS880-formfat (Alvorix) and IPMTB-TK (Truckee) motherboard, but not IPIEL-A3 (Eureka3).

• Pavilion dv6700 Motherboard

  Hi all

  I have a Pavilion dv6810us dv6700 with a broken motherboard line. I'm looking to replace it, but am not sure exactly what part number I need. The sound that I found is 459565-001 and 443774-001, but I am unable to find the exact specifications for either. I need one that supports 4 GB of RAM DDR2, a processor socket S1 35w AMD and NVidia GeForce Go 7150 M graphics. All this is causing dv6810us I have, but I can't find the serial number of the motherboard anywhere. If someone could help it would be greatly appreciated. Thank you!

  Hello

  This is one that works for your machine:

  http://h20141.www2.HP.com/hpparts/?cc=us&lang=en&JumpID=hpr_r1002_usen

  Kind regards.