699280 001

Similar Questions

• 2016-001 security update restart blocks iMac

  This is an iMac of 2013 end on OS X 10.11.6. Installation of security update 2016-001 10.11.6 requires a reboot. The iMac freezes on the restart with a black screen showing a cursor sensitive but do not restart. Is the only alternative to the power of the machine cycle. I downloaded and reinstalled OS X 10.11.6 on the App Store. After installation, restart in the Apple menu has worked very well and directly for 3 restarts successfully. I then tried again to install the security update. When he initialled the reboot, the machine hung up again as previously described. I have power drove the machine and after reboot, restart from the Apple menu has failed, resulting in the same shot on reboot as described above - black screen, sensitive cursor.

  The machine runs an i7 processor at 3.5 GHz with 16 GB 1600 Mhz DDR3 RAM and a 256 GB SSD.

  Any ideas on how to solve this problem would be greatly appreciated.

  TIA,

  John

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once. If it works, try to rerun the update from the drop-down list. If it is successful, use the link below for the security update.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

  10.11.6 updating combo

  Security update 2016-001

• security update 2016-001 crashes

  Hello

  This morning, I tried to install the security update 2016-001 el capitan. Installation hung. It is in 'one minute' now for nearly two hours.

  The machine is an iMac 27 mid-2011 "

  If I have to hard start, which will be screwed up? Can I go back to a working state?

  Paul

  I had the same problem. I rebooted and it was a normal start. I went to the  menu with the option/alt key is pressed and ran system information. The update has not been installed. I downloaded from the link below and installed successfully.

  Security update 2016-001

• Cannot download, news, security, update, 2016-001., I, have, shut down, my, screen, saver and, my, lock, program, but still, won't, load., everyone, know, what, the, problem, ould c, be?

  I can't get the last security update for download.  I have Adblock and screen saver have stopped, but in vain.

  Try to download it from the link below.

  Security update 2016-001

• This update (Security Update 2016-001 El Capitan and security update 2016-005 Yosemite) broke my iMac. I had to restore from Time Machine 2 times!

  This update (Security Update 2016-001 El Capitan and security update 2016-005 Yosemite) broke my iMac. I had to restore from Time Machine 2 times!

  Please correct this update security update 2016-001 El Capitan and security update 2016-005 Yosemite.

  My screen freezes during my login on my i - Mac!

  I tried 2 times with the same result. Restored my i - Mac 2 times!

  My iMac after this update of market with gray screen too, very bad update in safe mode.

• Security update 2016-001 vs MacBook Pro mid-2012, using external SSD

  Hello

  The 2016-001 security update progress bar went to 25 days and then reduced back to "less than a minute" but seems stuck on 88.1 MB 414MB.  I am currently using an external SSD (HARD following internal disk failure), but everything else seems to work well following a resumption of Time Machine on the SSD.  Any ideas?

  See you soon

  Updated - now 173 MB 414 MB and 32 minutes!

• don't restart after 2016-001 10.11.6 security update

  I've updated a security update today 2016-001 10.11.6 as my computer does not, restart a few visits on this page

  Shut down the computer using the power switch, and then restart. After the restart, hold down the option/alt key while clicking on the  menu and select system information. Refer to the Installation section to see if the update has been installed. If this is not the case, use the link below to download the update. This happened to me when I tried to install it.

  Security update 2016-001

• 10.11.6 - black screen with cursor in security update 2016-001

  Hello

  After installing safety day 2016-001 10.11.6 and reset as part of the installation process, I get a white apple logo, the white line will blink twice and then I get a black screen with white cursor. The cursor moves with the mouse but nothing happens and I do not get the login screen. This happened on my MacBook Pro and my iMac (retina 5K, end of 2014) (2015).

  Any help is greatly appreciated.

  Best regards

  Tom

  Same problem with iMac 5K, no problems with MacBook 2016 if. Very glitchy update indeed.

• Update of security 2016-001 cause major accident

  I just updated the 2016-001 (Sep 02/16) security update on El Capitan v10.11.6 and it has caused a major system failure, twice.

  All applications are unusable, cannot load system preferences, constantly get "led unexpected resignations" error windows pop up that won't go away.   It wont let me report it to Apple and ignore just made another appear.

  First time I started to the Cmd - R system recovery and reloaded OS - X and spent a few hours fixing all the links of the app, then reloaded the updated security after several own boots and's done it exactly the same again.

  Having just now booted to safe mode and empty the contents of/Users/yourname/Library/Caches in the trash, but it made no difference.  Have a time machine backup of it is 6 weeks, but not yet used.

  Seems that I'm not alone... maybe Apple was too fast it rush out before the big event in next weeks...

  Trash content of/private/var/folders/and restart.

• Where the 10.11.6 2016-001 security update - download links?

  Where is the 10.11.6 ('El Capitan') 2016-001 security update - download links?

  On the App Store.

  Open the App Store, and then select the updates at the top of the menu in the window of the App Store.

  Update the software on your Mac - Apple Support

• HP dv7-7270 envy: module Intel Centrino Advanced-N 6230 WLAN 670691-001

  ENVY of HP dv7 - 7270ca Notebook PC

  Model #: C2H79UA

  I would like to upgrade my laptop to work on the Strip fi wi 5 mhz. Are there any recent changes or updates to this issue?  The last time I checked the module Intel Centrino Advanced-N 6230 WLAN 670691-001 was the only one to try, but I would like to know if it's always an option that will work or is there another method that works?

  I need to move to 5 mhz to enjoy my internet service.

  Hi @Todddo,

  I read your post and I thank you for your response. We always recommend that you buy at HP because it is certified by HP for their computers, tried, documented and tested. If you buy a third-party site, you would do so at your own risk. Our parts to store the site link:http://partsurfer.hp.com

  Our website is: http://store.hp.com

  You could call these numbers, which appear on the Web sites.

  Please check this link out and that could be really useful: http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/HP-7260he-wireless-card-upgrade... 

  Link 2: https://www.amazon.com/Intel-Centrino-Advanced-N-Wireless-Transfer/dp/B005LAIDOY

  I ask you again to contact a local before the upgrade professional technician so that other issues arise with your computer

  You will need a wifi combo card that supports Bluetooth and wifi. Otherwise, your Bluetooth function could disappear from your computer and you must use an external Bluetooth adapter.

  I hope this helps. I would like to know how this happens. I hope that the problem is solved without

  disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

  I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

  Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

  Australia
  TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

  Cannot install the latest drivers below (everything worked when bought the laptop):

  -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
  -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

  * DVB - T Tuner Driver *.
  The EXE file extracted in the temp folder and goes no further.
  The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

  * Bluetooth Driver *.
  First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

  Then install attempt fails to go too far (is unable to install the driver at all).

  Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

  I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

  Refer to pictures:

  DEVICE MANAGER
  http://I52.Tinypic.com/35cr38i.jpg

  1ST COURSE SETUP
  http://I52.Tinypic.com/2r6jfv9.jpg

  2ND INSTALL PROGRESS
  http://i55.Tinypic.com/jgphfc.jpg

  see you soon

  Dennis

  > The EXE file extracted in the temp folder and goes no further.
  > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

  Try to extract the exe from another place, not in the temp folder.
  In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
  Choose the installation procedure advantage and point to the folder that contains the extracted files.

  With regard to the issue of the BT;
  Download the new battery of BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Then clean the registry using the CCleaner.
  This tool is freeware and can be downloaded on several different pages.
  So after cleaning check if you could install new BT of the register stack.

• LM336av: 650779-001 ram max

  Hello

  I searched the Internet and called the customer service (which wouldn't let me speak to a representative because my laptop is no more supported), and I just want to know how much ram can support the motherboard 650779-001.  The laptop at the LM336av.  Currently, I have 6 GB, I just want to know if I can go to 8 or 16, or if 6 is the max supported.

  Thank you

  Steven

  16 is the maximum memory supported (2 x 8 GB)

  Your repair manuals

  It is the DDR3-1333.

  To learn how, see p. 66.

  8 GB (10600, DDR3 1333 MHz) 634091-001

  https://www.Amazon.com/Kingston-Technology-notebooks-KTH-X3B-8g/DP/B007BPOHLK/ref=sr_1_1?ie=UTF8 & qid = 1468950786 & SR = 8-1 & Keywords = 634091-001

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• NB250-001 - no voice server

  I have a Toshiba NB250 - 001 PLL2PC with no speech server and I downloaded the program from Microsoft.com but I can't install it on my laptop because it is not supported by my processor type.

  I need to know where I can get a speech engine for the English and the French

  Hello

  > but I can't install it on my laptop because it is not supported by my processor type.
  So why you want a speech engine for the English or the French? I mean if your processor type is not supported another language will not help you.

  In addition he s not a Toshiba related issue and I recommend contacting Microsoft. I m that they can give you a detailed answer and they know more about their own products ;)

• HP Pavilion P7 1180t desktop: what is the difference between the hp 656846-001 and 002 656846 motherboards?

  Is the HP 656846-001 card mother substitute satisfactory for the HP 656846-002 motherboard for my desktop PC?

  Hi @sisman,

  If you are in North America the link to the user of HP in part, since the last post, will allow you to order the part.

  You will not lose the features in or using-001-002.

  Hope this helps, please get back to me if you need more help.