7 different monitor installed on Tecra A8-104?

Similar Questions

• Tecra M9-104 with docking station - DVI resolution

  I wonder if anyone can help. I have a Tecra M9 - 104 running Windows XP. I also have the docking station to go with it. The great thing about the docking station, it's that it can out to two screens as the port on my M5 Replicator could not do.

  I bought two identical external screens that have a native resolution of 1440 x 900. I went into the Nvidia display configuration and set up to display both (one is plugged in VGA and one DVI port). However, the display on the DVI monitor is wrong. After further investigation I woke up the menu of the monitor on the screen to see that the resolution actually be issued is 1280 X 1024, despite Nvidia screen saying 1440 x 900 has been the output. Whatever I do, I can't increase the resolution on DVI port.

  The only thing I could find on Google and these support forums is that the maximum resolution on the DVI port on a port replicator is 1280 x 1024, but it was for the M1 and M2 series. This laptop is the last series and as such, I expected that the spec had been updated at this time.

  Someone at - it ideas?

  Could be due to a limitation of the video driver on the laptop, or you can try to download a utility that requires to use a different resolution, its called Powerstrip (do not have a download link sorry).

  Be careful with it though, you can mess up your video driver

• Tecra R950-104 - can I replace ODD with SSD?

  Hello

  Is it possible to replace my DVD drive with an SSD with a HARD Drive Caddy?

  My laptop is a Toshiba Tecra R950-104.

  Kind regards

  Luis

  Hello

  I found on the internet some UltraSlim SATA HDD/SSD mounting frame that allow the use of 2nd 2.5 HDD/SSD drive instead of ODD in Notepad Tecra R950 but to be honest I m not 100% sure if the BIOS recognize such additional device.

  I know that computers Toshiba laptop (Portege and Tecra) series different takes in charge these updates in the past but this replacement was not supported by each laptop model.

  It depends on the BIOS and in the event that the BIOS recognize the 2nd HDD/SSD drive, the system should be able to recognize 2nd HARD drive

• Tecra R950-104 - memory expansion

  Hello

  Can I install 16 GB of Ram in my Toshiba Tecra R950-104?

  Currently, I have 8GB and I would like to replace the existing one with 2x8GB 2x4gb.

  Best regards

  LRP

  Hello

  According to tender specifications that your Tecra can scale up to 32 GB and you can use modules RAM 4 X 8 GB.
  Compatible RAM 8 GB memory modules have PA5037U-1M8G part number.

• Disk failure HARD Tecra R950-104

  Hello

  I have a Toshiba Tecra R950-104 with almost a year.
  Everything works fine except the HARD drive.

  In this period (almost on the year), I got 2 hard drive failure (hdd 2 had to be replaced!).
  Fortunately the issues occurs within the warranty period.

  Y at - it problems with this machine, about the drive HARD (it's a 500 GB, 7200 RPM Toshiba HDD).

  Thank you

  Hello

  HARD drive problems do not portable but depend on the use of HARD drive and use of portable.
  The HARD drive is a wearing part. Sooner or later every HARD drive was going to die.

  This problem can occur because the HARD drive is affected by shocks while moving the laptop. In addition, there a lot of different hard drives on the market. Some are less expensive because of the low quality and some HDD cost more because of good quality.

  If you keep the eyes on the quality of the HARD drive.
  But to be honest, I would never buy a laptop HARD drive. I replaced my HARD drive with an SSD. Its much faster and more sustainable as a HARD drive

• Tecra A10 - 104 finger print driver for windows 7

  Hello

  I just installed Windows 7 on my laptop (* Toshiba Tecra A10-104 *)
  It seems that everything works well except the following drivers:

  1 - fingerprint Sensor

  2 PCI Simple Communications Controller

  Can someone help me?

  How to help?
  Either you can find the drivers on the Toshiba download page or not.
  According to this document - http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm - Toshiba Tecra A10 will be supported Win7.
  This means that all Win7 will be available. If you can't find them, I assume that they will be released soon.

  That's all that I can say about it.

• Tecra A8-104: is the Toshiba software available for WinXP Pro x 64

  Hello out there!

  I have a Tecra A8-104, bought with Vista Business Edition installed on one of the two partitions.
  I have installed on the other partition, Windows XP Professional x 64 edition and I wonder if TOSHIBA
  a deal of this situation and regarding the concerned TOSHIBA utilities. (?)

  Please come and share with me what.

  Hello

  I know Toshiba has never issued notebooks with the 64 bit version of Windows XP. And that's why Toshiba tools, drivers, and utilities are not available for any 64 bit OS.

  But I read a few computer gossip and news on various Web sites and possibly drivers Vista 64 bits and tools may be available in the near future.
  We'll see. But don t expect any new tool XP renewals. XP is spent

• Can I use the Modem 3 G on my Tecra R950-104?

  I have a Tecra R950-104, and when I remove the battery, there is a 3 G Sim Card slot, just like it says in the manual.

  The problem is that Windows (Win 7 64 bit) does not recognize any 3G modem in the computer.

  So, this means that only some models have the modem, but all have the slot for the sim card?

  I have already installed the 3 G Modem driver, downloaded from the Toshiba site, the driver has been installed without any problem, I have a Sim card that works - tested in a 3 G USB Modem - but still I can't do any connection because Windows does not even a modem.

  You are right, some models have the 3G module inside and, unfortunately your model does not have it.

• Multiple monitors use on Tecra M2

  I wish I could use 2 additional monitors on my Tecra M2, currently I use a docking station I plug a monitor extended in and that works very well, is it possible to hook up a 3rd monitor in the plug of the monitor on the right rear of the computer laptop itself and using it as a 3rd monitor? If so can you tell me how to operate as I tried this and have not yet had a bit of luck.

  Hello

  AFAIK, it is possible to use only one additional monitor.
  You can connect it to the RGB port on the right side or you said, you can use the port replicator.
  By using the FN + F5 key combination, you can choose between different output modes. I don't see any option that allows 3 monitors together.

• Is it possible to buy Tecra A8-104 only with Linux as main OS

  Is it possible to buy the Toshiba Tecra A8-104 with Linux preinstalled, or without any OS? I like to use for the majority of free software, but I wouldn't pay for Microsoft OS.

  Hello

  AFAIK in the EMEA region (Europe, Middle East and Africa) something like that is not possible. I'm not 100% sure, but something like that is possible in the United States.

• Cannot use external monitor with my Tecra A9

  Hi all

  Need help on this:

  I connected to an external monitor to my Tecra A9 but the monitor shows me blue color.
  I tested other monitors and reset the graphics card to the default settings but the same stills.

  Can you give me some advice on how to find out the solution for this?
  I really need the external monitor to work because I need to edit some screens of the application.

  Thanks for your attention!
  Pago

  Have you tried to use the option of FN + F5 to switch to the external display?
  If this does not help I recommend to check the settings in the properties of the graphics card-> advanced settings.

• Vista 64-bit drivers for Tecra A8-104

  Where to find drivers for Vista 64 bit laptop Toshiba Tecra A8 104?

  Hello

  I assume that you checked the page European driver of Toshiba and you found nothing.
  Well well do what can you?

  I think that there is only one real solution; collect the driver 64 bit Vista in your own hand.
  Audio driver can be found on the page of Realtek.
  Drivers WLan, you can get from here: http://195.182.196.33/wlan/
  Player-> www.intel.com

  You can also try to use some other series of laptop drivers.

  As you can see to look for

• Can I acquire at the same time HAVE two cards of different acquisition installed on the same computer

  Here's my question:

  I have two different cards installed in a PC. Specifically, PCI-6224 and PCI-6254. I need to acquire 50 analog inputs (real time). Can I use two cards to do? I mean I can synchronize these two cards and acquire simultaneously several channels at the same time?

  Thank you

  Alessandro

  Yes. You can use a RTSI cable between them. See the examples of the expedition. If you are using LabVIEW, look at several Synch - Analog Input - Cont Acquisition devices.

• Pavillion 500 - c60: two different monitors as multiple monitors

  Is it possible to run a two-screen display using two completely different monitors? I'm replacing an antique desk with a 500 - c60 (Win 8.1) Pavilion and also buy a W2371d monitor for the new machine. The old PC use a perfectly good 17 inches Samsung screen, but the former.

  What will happen if I tried to include my old monitor in my new configuration? If I was able to use two monitors, I would of course make the new HP the primary one. Yet, it would be useful to me if I could have the additional area of the former monitor display. However, the screens are not only of different manufacturers - they are of different vintages, different sizes, different standard resolutions. It is even possible to do?

  Hello

  Yes, you can use TWO different monitors as indicated:

  • Chart AMD Radeon HD 8400 (in combination with the processor)

• Dual monitor installed on Inspiron 3487

  I'm reposting this question here posted with no luck in the Dell Forum of bureau-video community. BTW, my OS is Windows 8.1 64bits.

  I just bought a Dell Inspiron desktop i3847-5386BK and I am trying to achieve a Setup dual monitor with 2 monitors 24 "widescreen LED Dell E2414Hr.

  The specifications for the detailed but photos also Office of front, back and inside the computer are here:

  http://www.Newegg.com/product/product.aspx?item=N82E16883156238

  Basically, the Office has 1 VGA port, 1 HDMI port and multi-port USB 2.0/3.0

  Specifications for the monitor, but also detailed photos are here:

  http://www.microcenter.com/product/420579/e2414hr_24_widescreen_led_monitor

  Basically, the monitor has 1 VGA and 1 DVI - D port

  The first monitor is already connected from the port VGA monitors to the VGA port of the desktop computer via the VGA cable supplied with the monitor.

  My question is about the best way to connect the second monitor. One option is to get a HDMI cable at one end (office) and DVI - D at the other end (monitor). The computer will be able to manage this dual output and adjust automatically to both monitors or it will require some changes of setting? The computer lacks a dedicated to my knowledge graphics card and my main goal is to use these monitors independently with occasional extended desktop display.

  Also, are there better options for the office monitor the connection in this case as a (office) HDMI to VGA (monitor)? I saw online that the HDMI cables at one end and VGA on the other end could be a scam because it is not possible to convert a digital signal to analog without converter, but also there are people who say this type of cable works fine. Are there better options to connect the second monitor using the USB ports on the computer? Given that one of my monitors is already connected via a VGA cable VGA will be the second different monitor everything in terms of brightness, readability etc if it has a DVI - D instead of VGA input? Finally, what would be a place to get the converter/cable recommended discount?

  Sorry for the post of multiple question since a long time, but any help on this would be much appreciated and will help other institutions. Thank you in advance!

  Computer output VGA--> VGA cable VGA--> #1 E2414Hr VGA in
  Output HDMI--> HDMI to DVI cable to computer--> 2 # E2414Hr DVI in

  Once connected, open the Intel HD Graphics Control Panel and configure the second monitor.