7 slate screen will not turn

The screen will not rotate from portrait to landscape when I turn it on.  Any suggestions?

As in the other thread, slide down from the top. Click the icon which is a "lock" with arrows around it.

Also can you please let us know when you need this rotation? It seems that it is locked during the first installation, but it is unlocked once that is finished.

Tags: HP Tablets

Similar Questions

  • Satellite A210 1AP - the screen does not turn

    I had a problem about a month ago with my Toshiba Satellite A210-1AP, just that the screen did not turn. Was working on the computer, all the lights were on. The light that shows the HARD disc flickered, as usual, but with display always off. So I stop, and the next time I tried it was warking as usual, with display turned on, he asked if I want to start windows normally or in safe mode (as when it is restarted abnormally). Then worked normally for a few days, and then it happens again. At this point, I could not go to the service (computer was in warranty, and how do you prove that something happens sometimes if it happened there). So I continued to use it, and as the time past the problem was more often. So I decided to go to the service.

    Guy in the service, said that the problem is the motherboard, so he changed the motherboard and it took months for him to do, and then when I called he said that it still does not. And maybe he has change rooms, display, graphics card is perhaps a problem, that he has not seen the problem like this...

    So my question is do you know what could be the problem? And the second question is can I demand of him, because he went from 30 days to give me a new computer rather change all parties to this issue?

    Thank you
    Nikola

    Hi mate,

    It's really hard to say what causes this problem, but I think that notebok technicians do a good job and they will be committed to repair your laptop as soon as possible. Maybe they ordered some new parts, but they are not available at this time

    Theoretically, all that could be the reason of this problem FL inverter, LCD screen, motherboard, graphics card, cable, etc.

    So I think you should call the technicians still what is the current status.
    But I doubt that you can get a new laptop for free. If it of still under warranty, it will be repaired.

  • Light (switch) on my screen does not turn off. I have to shut my computer down several times a day to turn off the monitor.

    Light (switch) on my screen does not turn off.  So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep.  I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.

    Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor).  It was about 3 weeks ago.  Now, the light stays green, unless I stop the whole computer.

    Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.

    Now, I can't turn off the monitor, except by turning off the computer.

    Hi JDandGinger,

    I suggest you follow the provided article and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

    If the problem still persists contact the manufacturer of the monitor for more help and information.

  • Windows 7 splash screen will not change after the vista update

    After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

    «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

    bcdedit/set {current} settings regional en-US

    or

    BCDboot % WinDir % / l en

    Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

    Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

    not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

    Thanks for your help
    Hispanico hispanico

    Hi hispanico,

    Thank you for visiting Microsoft Answers.

    I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

    1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

    2. Press any key when prompted to do so and follow the instructions that appear.

    3. when the Windows Installer page, click repair your computer to access system recovery options.

    4. follow the instructions.

    Please visit these links for more information on the Startup Repair:

    1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

    2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • TREO 755 P HEEEEEELLLLLLLLLP! Phone will not turn...

    Lately my 755 p will reset on its own, but it always comes back to the top it's very annoying. Juice my phone reset itself again, but now it will not turn back. It keeps going back and forth between the 'electric access' screen and the "palm". I took out the battery and left for several minutes, but I still get the same screens. Anyone has any suggestions on how to fix this shit? I'm really starting to hate this phone.

    You will need to hard reset the unit. KB. Palm.com enter article 887

    Message relates to: None

  • I have 6 phone is dead.  Will not turn back on

    I have 6 phone is dead.  Will not turn back on

    See Troubleshooting in the paper support. If your iPhone, iPad or iPod touch won't turn on - Apple Support

  • Tecra M9 - sometimes that it will not turn on

    Hello.

    I have a Toshiba Tecra M9 who has a problem. Sometimes it will not turn on. You must remove the battery and press the power button. When it loads will work fine until I have move or take it upward and then hangs and crashes. Then, you must take the battery out so he can turn it back on if it will be in all.

    I tried to reload xp, tried without battery, tried a known good ram in both slots, a different hd and took part to see if I can see something loose, I have now run out of ideas.

    any help would be good

    Thank you

    Hello

    Which is really strange, buddy... In my opinion, that sounds like a hardware problem, what do you think?
    You should contact a technician for laptop (authorized service provider). Guys can verify and Exchange defective equipment parts. Maybe a mailfunction of the motherboard or the CPU

    By the way: you have updated your BIOS? If this is not the case, to do this, first!

  • Status bar at the bottom of the screen will not allow

    Status bar at the bottom of the screen will not even when I try to activate with display > verified status bar

    This has happened

    Each time Firefox opened

    Hello Darryl.

    It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

    Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

    If you need help with one of your modules, you will need to contact the author.

  • I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

    I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

    Honestly, this sounds like a problem of carrier. Are you able to make/receive calls or send and receive text messages? I would first check with the carrier to make sure that your phone is still set up to use mobile data. Something was accidentally deleted when they merged your bills.

  • K010 ENVY: my laptop will not turn off

    Hello

    When I shutdown/hibernate/standby/resume my laptop, it will die completely.

    All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

    And when I try to Hibernate, everything is ok, but I have the same problem.

    Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

    After manual turn off, when I turn it on again, everything works correctly:

    -If hibernation: OS will continue to last situation.

    -If start/stop: OS works normally without error or warning.

    After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

    Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

    Is there a parameter/software to check and fix my problem?

    Thank you

    Hello

    You are welcome

    On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

    You can use the following method to install an earlier version of the driver IMEI.

    Download driver IMEI on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

    Disable your wireless card (should be f12 ).

    Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

    When finished, restart the laptop.

    If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

    https://support.Microsoft.com/en-GB/KB/3073930

    Kind regards

    DP - K

  • installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online

    NEW HP computer bought in September, already updated to Windows 7 with HP upgrade kit. I installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online. Also can not get a pop window to activate by phone. HP says that I must fully restore Windows Vista x 64 Home Premium AGAIN at the factory all MICROSOFT updates, and THEN... so I can reinstall Windows 7 upgrade. Why now only after 30 days Windows 7 refuses to ACTIVATE! Nothing but run between Microsoft and HP > Please HELP without having to reinstall EVERYTHING on my computer.

    Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

    If you were not able to validate, follow these steps:

    1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

    -Online Windows XP: double-click the executable file to run the tool.

    -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

    2. after running the tool, click the Windows tab and then click on copy to the Clipboard.

    NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

    3 start a new post in the appropriate Microsoft Genine Advantage forum and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

    4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

    MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

    Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

    Your problem has nothing to do with the Windows Update feature. Contact MSN Support. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Have VFC Z216Gx/b, which suddenly will not turn on.

    Have VFC Z216Gx/b, which suddenly will not turn on. AC is on but nothing happens when you press the button 'on '.

    Hello Bob,

    Welcome to the community of Sony.

    Try to perform all the steps here: https://us.en.kb.sony.com/app/answers/detail/a_id/35540/c/65%2C66/kw/35540

    If the problem persists, contact Sony Service support here: http://esupport.sony.com/US/perl/service.pl

    Kind regards

    Miguel

    Note: If my post answered your question, please mark it as an "accepted Solution".

  • Can't connect, connection startup screen will not respond to mouse clicks or keyboard

    I do not have a DVD to boot from. I use a laptop (Acer Aspire 5610). The keyboard and mouse are internal.  Any suggestions at all? I tried the Safe Mode, Mode safe mode with guests hoping to type rstrul.exe, but never had the guest. He went directly to the display of connection with my daughter and my icons. I have added no new material.

    Separated from the:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/cant-login-login-splash-screen-will-not-respond-to/54da4727-b98c-436a-8D82-f31c3355f5fd

    Have you shot inadvertently carpet of mouse/keyboard. This can happen through the Fn key on some laptop models. Find the picture on the key Fn, should give a clue.

    You can borrow or buy a usb KB and mouse that you would at least pass by troubleshooting?

    Tricky

  • my laptop will not turn on after a recent windows update

    Windows recently did an automatic update on my laptop and need to reboot to complete. However, it will not turn on at all now. I tried to run the install disc and used to attempt to repair my system and yet it is said that it is not repairable. Ive also tried to restore to a previous point, and yet, he won't do that. Help!

    Hello

    1. the updates are was?
    2. what exactly happens when you try to start the computer? You get the error message?
    3. What are the error messages that you receive when trying to run the system restore or Startup Repair?

    Step 1: Use the option last good Configuration see and check if you are able to boot to the desktop.

    Reference: http://windows.microsoft.com/en-US/windows-vista/Using-Last-Known-Good-Configuration

    Step 2: Check if you are able to boot into safe mode and send back the same.

Maybe you are looking for