70 d EOS problems

Similar Questions

• Problem with flash Speedlite 320EX and EOS Rebel T3i (EOS600D)

  Hi, for about 18 months, I've used this combination without a single glitch or problem. I bought the Speedlite old second hand, and all died on me in Nov. The guy I bought said it was about 3-4 years wneh I t so I thought that I just replace the same model, but buy a new one this time.

  Since it seems however not the flash unit at full power at times and at others seems not synchronized with the shutter. Sometimes it works fine, but then doesn't flash at all or has a problem that I describe above. I have returrned the flash at the company and they said their technician checked and it works fine.

  Anyone else have these problems or indeed solved these problems? Any suggestions would be very welcome.

  Thank you in advance.

  PS. edited title because I just discovered the EOS600D called the EOS Rebel T3i in the USA. I'm from Scotland.

  Other wrote:

  Thanks, yes I tried to situate the flash every time, as well as all the parameters of compensation. What seems to work he left for 10 minutes, this iften solves the problem, and I can carry on shooting images for another period. So confusing and frankly boring.

  Bravo for the answer.

  Brian

  Ten minutes for each flash? In theory there could be something wrong with the condenser and the unit needs service.

  Ten minutes, then you can fire flashes several before he had to rest again? Most likely, the batteries are weak or inappropriate to the task. Make sure you use Eneloop pros. Most serious photographers think that there is nothing better.

• EOS Solution Disk v28.1 on Mac installation problem.

  Yesterday, I received the EOS camera 700 d and when I tried to install the EOS Solution Disk nothing happened. Nothing seems to happen when I click on the install icon. This happened to someone?

  Same problem, same camera - t5i.  On a MacBook Pro running OS 10.9 mavericks.

  I have the version of the software 28.0

  I fixed it by creating a different user (with administrator privileges), and with this user, I could install the software and will then go to my normal user who then had the software installed.

  A little inconvenience and had to do some internet research on other forums to find it, but it works.  I hope that canon will solve the problem for others.

• EOS T3i - Autofocus problem

  Hi gang... I have an intermittent problem with an EOS T3i I bought for my wife.

  It was a purchase of kit that came with the 18-55 mm IS II lens.

  It seems that the autofocus function works imtermittently on my camera. I still have 2 months left on the warranty, but I want to run this by the group.

  At startup, the unit works very well. The autofocuses of stepper motor, the camera's going to break a few (or more) pictures. I'll hear the engine step by step to do its thing, auto focus points viewfinder shows and illuminate. Confirmaiton focus light begins to blink. The camera will make the two beep. the camera will take the picture.  Now when things go wrong, they go really wrong for this device.

  If I change a scene where the camera will have to move the lens and the automatic re-development. Engine step th does not light, auto focus points viewfinder will not not turn on and the right focus confirmation light will blink. If I press the shutter button, nothing happens. I have no beep.

  I called Canon support and they suggested a low level format. I did it but the problem persists.

  just need conformation that it's not normal behavior and I was wondering if anyone else had this type of problem. Thank you very much! :

  OK you need start the normal process of elimination.

  The lens works on another camera?

  The camera works with a different lens?

  The contacts between the lens and the camera are clean? Try denatured alcohol and a q-tip.

  You have already set the camera to the factory settings? It is not the memory card, BTW. The unit should work if she has a card in it or not.

  If these simple things have no success, a repair shop is probably expected.

• I have a problem with my canon cam works only not with the eos unility now

  OK I use to connect my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software and they say it's a problem with vista 64, do not leave the work of software he will work with the computer, but not the eos utility they told me to remove the key from the vid but donty know how

  Monday, January 31, 2011, 20:35:31 + 0000, tank5700 wrote:

  OK I use to plug my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software, and they say it's a problem with vista 64, not to let the work of software it will work with your computer
  but not the eos utility they told me to remove the key from the vid but donty know how

  You ever need connect your device directly. Buy a card reader for
  the type of flash card your camera uses (they are cheap).
  Place the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is easier and does not use
  the camera battery. I have both these card readers - one I keep on
  my desk, close my desktop computer and another that I keep in my
  Bag for laptop to use when traveling.

  Ken Blake, Microsoft MVP

• I have a problem with the canon 5dsr with Lightroom 6 connection I can't drop images directly in Lightroom the camera connected only by the EOS utility help

  I have a problem with the canon 5dsr with Lightroom 6 connection

  I can't drop images directly in Lightroom

  The camera connected only by EOS utility

  Help, please

  Hi mateuszm,

  You cannot drop images directly in Lightroom.

  You need access to the file menu in Lightroom 6 > import Photoshop > and choose your camera as source > select the images to import and import.

• I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  Hi soewandichan,

  Please make sure that Lightroom is far, i.e. Lightroom 5.7.1.

  Also, please copy the images from the card, and then paste them into a folder on the desktop and then try and import them into Lightroom.

  Kind regards

  Tanuj

• Home with Lr 6.1.1 and EOS T6i problem

  I just bought a Canon EOS t6i and when I try to start the attached screenshot, as the camera connects for a brief second, then disconnects constantly. I have the latest version of Lr (point 6.1.1) and I tried my old camera and it works fine.

  Any ideas on how to solve this problem?

  Hi ferriemanuel,

  From now Canon EOS T6i is not supported for shooting captive Lightroom.

  Please read the article for the list of camera tethered shooting: https://helpx.adobe.com/lightroom/kb/tethered-camera-support.html

  Please let us know if it helps.

  Kind regards

  Tanuj Sandal

• The RAW of Canon EOS 70 d files loading problems

  I recently changed my camera to an EOS 500 d to a 70 d and now find I can't open the RAW files, even if my Photoshop says that he is up to date when he is questioned through creative cloud.  However, when I check the version of Camera RAW uses in 2014 PhotoShopCC is 8.0.0.137.  I tried to find and download the recommended version 8.2, but everything gave me was to provide me with a DNG Converter, that has not helped.  I contacted the cat online Adobe but part-crossing lost the connection and I cannot restore again to complete the process of their operative took me through.

  Someone at - it ideas on how to solve this problem?  Moreover, the files open fine in Lightroom 5.5.

  Thank you for taking time to answer, that was kind of you.

  I managed to solve the problem by going to Adobe Labs and downloaded and installed a beta version of Camera RAW 8.6, it works a treat.

• EOS Rebel SL1 Mode Dial problems

  Hi, I don't know much about cameras, but I've always wanted a nice like that, and a friend of mine told me that the SL1 was good for beginners. It came in the mail today and I just started to experiment and play around with it. I don't know if it's something I did by mistake or it's just a problem with the camera, but I realized that the Mode dial is not correctly programmed. In order to develop if I had to turn the knob to the symbol A + (I'm sorry if this isn't what it's called), the camera will enter the function of sports. I'm sorry, but I really do not understand this and I would love it if someone could help me. Thank you!

  Hmmm.

  On this camera, the sport mode is directly opposite the position of the mode A + (Auto).  There is a small pip as an indicator on the camera on the left side of the dial.

  Are you sure you look white pip and not power on leverage as an indicator?

  If so, that's the problem.

  Otherwise:

  Do ALL modes to register as one just in front of the right pair, or they are all Sports are random or something?

  Patterns are printed on a sheet of thin "cap" which is literally glued on top of the handle.  I know because mine fell once and I had to stick on.  I guess it's possible they put on back at the factory, but I don't think because there was a small crack in the button and a tab in the CAP, which have to align or well you can not set the cap in the flush.

  If you read right and the button won't you need to return the camera.

• EOS Rebel T3 battery problems

  Hello

  I had my camera maybe 8-9 months ago, and I tried to understand this battery problem since then. The original battery supplied with the camera hardly worked at all. I would like to load completely, and then it would take about 5 pictures and then caput. The camera told me to reload.

  I bought a new battery (battery official canon) and this one does a little better job. However, I have always charged between uses. I remove the battery from the device between uses, but whenever I have turn it back on again it could last 10 pictures before having to recharge. I even bought a new charger thinking that maybe it was the charger that was not working, but that has not helped the problem.

  So my question is: the batteries don't last long in general? Is it normal to have to recharge the battery after each use? This could be a problem with my camera I'll need to send it to be fixed?

  No, they do not get hot to the touch. In fact, if I plug it into the charger, the charger shows a green light full load after a few minutes.

  The camera will show a full charge for a minute and then turns off with the message "recharge" the next. After turning on the back, the battery indicator usually will show a full charge again.

  I am under the impression that the problem lies in the camera and have contacted support to try to resolve the problem. Thank you all for your help!

• EOS 50 d, Flash problems

  I tried to take a picture that required the use of a flash. Him build-in flash "should have" popped up, but it did not. I couldn't, electronically via the flash button, do come. After going to the 'Flash' settings, under '' integrated '' I got the message "cannot display this menu. External Flash is attached. "Under"External Flash", I got"unable to display this menu. Not compatible flash or the flash output is off. «The last message was posted under the flash settings external and «Clear flash ext...» "I erased all settings of the camera, deleted/replaced battery, changed the battery to an another one (to the authentic times) and nothing fixed the problem.
  I tried to raise the flash with my fingers but I'm afraid I'll break anything by doing this.
  I rarely use flash anyway, but the only time where I wanted...

  Any help would be greatly appreciated!

  Firmware: Version 1.0.9

  This unit has never had an external flash attached, via the hot shoe or PC terminal.

  If it indicates that the external flash is attached to what it means is that the sensor in the hot shoe is probably stuck.

  The shoe shot has two "rails" hold an external flash and each rail has a "spring blades.  Use a toothpick (or something that is used to scratch the camera) and * carefully * lift springs.  On one of them, you will see a small button (probably black).  It is a 'micro switch '.   When you drag in a Flash, this button is depressed, and that's how the camera knows that you have attached an external flash (in which case she will not try to use the internal flash.)

  These micro-switches can (and obviously do) become 'glued' anytime.  Shake the micro-switch with the toothpick and it probably just "pop up" for you.  If you want, remove the battery from the camera and then pick up a drop of denatured alcohol and drop it on the switch to help dissolve anything that might be what actually stick.  Do not use any type of oil (oil just will help collect more dust and it erases everything.)  The alcohol evaporates so you won't have anything left out Gummy.  You probably won't have the alcohol, but if the switch is not free pop up, then it would be one of the ways.

• I have problems to import photos from the Canon EOS 70 d in Lightroom on a macbook pro

  When I try to import photos from my Canon EOS70D in Lightroom, first I get "Preview not available for this file" for all files on the camera. If I check a few photos to import Lightroom said then that's important but the pictures never import and eventually I have to cancel the import. I tried to import a picture and this same thing is happening.

  I don't think that is the cable or the camera that I can import into iPhoto from the camera using the same cable.

  All advice appreciated.

  It's ok thank you, I found the problem. I have to let the camera connected to the laptop for a while. Finally, all files have thumbnails, and then I can import them. I tried before import them too quickly.

• I recently bought a new Canon, downloaded an updated EOS and now Photoshop won't open my RAW images.  I tried several of the suggestions of others who seem to have the same problem but without success.

  Whenever I try to download an update it is said that it is not necessary.  I'm not as tech savvy as I noticed some of you all are but any help would be greatly appreciated.

  In photoshop cs6 go to help > about plug-in, click on the words of Camera Raw and see what version it says.

  If less than 8.8, try one of the linked below camera raw 9.1.1 installers then and I hope that your T6i files will open in photoshop cs6.

  Try this camera raw 9.1.1 installer

  http://swupdl.Adobe.com/updates/OOBE/aam20/win/PhotoshopCameraRaw7-7.0/9.1.88/Setup.zip

  or if it does not, this one under Camera Raw 9.1.1 installer:

  Camera Raw installation of Adobe Photoshop CC and CS6 program

• Download problems image cable Canon camera

  I have a brand new computer laptop Mac Book Pro with OS El Capitan, and I am trying to download my pictures from my compact camera Gx1 to the laptop via the camera download cable. Of course I've already installed the Canon Canon Utilities Window /Camera of its CD image software (has been attached to the camera when it was purchased). (The Canon EOS Utility software, which I also installed it, is exclusively for my Canon EOS camera models). However, the download of the image does not work either.

  Images are downloaded into the folder Mac (program?) "Bilder" (*) (Images (?) in the version of Mac OS English?) where I certainly don't want to, I want to download my images in my own folder structure that distinguishes for example camera model/date photo taken/RAW files or jpeg etc. The folder Mac (program?) "Bilder" (Images (?) in the version of Mac OS English?) may be authorized to store the images simple iPhone 6s I take, but certainly not Raw files of my actual cameras!

  (*) "Bilder" (Images (?) a multicolored a little icon circle in the operating system Mac - Mac (program?) file

  The thing very strange, as the first two weeks of use my brand new computer computer laptop Mac Book Pro, the image download to the Mac via the cable from my camera Canon G1x worked as planned, but AFTER I once (the first time ever to purchase date computer I tried to upload pictures to my iPhone 6 s new Mac) I downloaded images to the Mac from my iPhone 6 s via the cable of the iPhone, the camera G1x download system image failed. I seems as if my download of images from the iPhone 6 s "Insider" start-up of the Mac OS (program) folder

  the 'Pictures' folder (Images (?) in English Mac OS version?) and the laptop Mac assumes that I want to download all the images, as for example my G1x camera RAW files in the 'Pictures' folder (Images (?) in the version of Mac OS English?).. . DEFINITELY NOT!

  I am terribly frustrated now and do not feel the I get any understanding or assistance from Apple support.

  This description of the problem will also be sent to the camera of Canon Inc., informing them of my issues with Mac OS El Capitan.

  Someone experienced with Mac, a friend of mine, said that "as usual, Apple"cache"the images and makes them normally inaccessible in the Finder. If you want to work wth them in another program (also), you must export the images of "Bilder" * (Images ()) - not at all practical, which means that two copies of images.

  Joined 9 screenshots - .png and .jpg files (. png files show how Mac views are displayed, show the .jpg files "how it should be regarded with correct download cables", the screenshots of the interface come however from a laptop with XP Home, not Mac OS operating system.

  The first two weeks of work with my Mac, the 'Download desired cable interfaces"WERE EVEN in what concerns the PC referred to above.

  

  Hi CanalogSE,

  Welcome to the communities of Apple Support! I'm sorry to hear you're having problems with your new Mac. You're talking about the 'Bilder' application seems to be the new application Photos, replacement of preparations on the previous iPhotos. If you wish, you can read more about it here:

  Apple OS X - pictures.

  Start with Photos for OS X - Apple support

  From your description, it seems that if you have connected your iPhone to import your photos, she may have inadvertently changed the overall picture import settings by launching Photos for the first time (since importing default photos for devices iOS in El Capitan's Photos). If you want to change the application for importing photos by default for when you connect your Canon Gx1 (for example, for the Canon software), you should be able to get rid of it in another application called Image Capture; I'm not clear what would be the name translated, but it should have this icon:

  Image Capture help

  In the Image Capture with your camera connected, you should see an option in the lower left corner to opens the connection this [device]: which will allow you to select your preferred; application If you don't see this, you may need to click on the the icon to display these options.

  Concerning