700 - 330qe envy: activate the second ports USB 3.0 on motherboard Kaili

Similar Questions

• It is possible to activate the "wake on USB" on a Satellite C870-142?

  It is possible to activate the "wake on USB" on a C870-142, specifically the USB 3.0 port? In Device Manager the USB 2.0 root hub properties have the "allow this device to wake the computer" greyed out, while the properties of USB 3.0 root hub is not a power management tab. All have the latest drivers from Intel, not obsolete Windows Update ones.

  There is no other choice that I don't see in the InsydeH20 BIOS, which is the latest update to version 6.80 site Toshiba drivers - I have not tried to find/load another version of BIOS. I want to install a USB adapter, Gigabit LAN, but should he Wake on LAN (who works with the NETWORK card internal fast ethernet). He has "allow this device to wake the computer" is checked, but I guess that's irrelevant if the USB port to which it is attached is not enabled.

  In case this wake on USB feature isn t available and supported by the BIOS, you won't be able to use it.

  Note: you cannot use any BIOS! You must use the BIOS available on the Web from Toshiba website. Use of other BIOS may damage the module EPROM and motherboard.

• How to activate the Infrared Port on the Satellite X 200

  Hi all, I'm Italian (sorry for my English...)
  How Activate/activate the infrared port on my X 200?

  It seems that is not properly working, infact, all devices ir in the area are not recognized?
  Annex 'Device Manager'-'Network adapters' there is only 'WIFI LINK and Realtek '.

  Thank you all

  Hello

  As far as I know the X 200 supports a consumer Infrared Port.
  This isn't the protocols series infrared (SIR) or Fast Infrared (FIR) that can be used to transfer files over several other Toshiba laptops.
  Protocol Consumer IR (CIR), can receive commands from the remote control

  See you soon

• Terca M4: How to activate the external ports, DVI and analog?

  Please can someone please tell how to activate the two external ports. I would use two DVI and analog to the office. Currently if you activate a second screen machine sets up the flat screen and the other the DVI external display. Is this in any way about this?

  See you soon

  Hi Matthew

  As far as I know you can connect an external monitor or a TFT. For this you can use the VGA (15-pin) port or DVI - D video, supported by PortReplicator III (PA3314E).

  Sorry, but I don't understand why you need the two holes at the same time. How many external screens that you want to use? Sorry if I'm missing something but perhaps you can explain your wishes more precisely.

  Good bye

• How to activate the RS232 and USB communication on the guest operating system in vmware ESXi 4.0

  I installed a software in the OS (redhat 5.0) invited to vmware, it must communicate with the device via RS232 or USB

  but not to communicate.

  Vmware tools is installed.

  I try to change the attribute of vmware, add the com port and USB, but still, it does not take effect

  What is the RS232 or USB available on the operating system called?

  How to activate RS232 and USB?

  USB and series are not available in a prompt. There are IP network series and usb IP devices that can be used.

• Information about the laptop ports (USB, HDMI, etc.)?

  I am currently looking a 17z-e100 portable Pavilion to customize and order. However, I can't find any information about the laptop ports. I need a HDMI output and 3 USB connectors and transfer large files on my key USB regularly, at least a USB 3.0 is necessary (with 2 USB 2.0 connectors).

  I was looking at the specs on another Web site, and they claimed that it includes 1 HDMI, 2 USB 3.0 connectors and 1 USB 2.0 connector, but it's a slightly different model so I would like to get my information from the manufacturer.

  So my question is, what are the ports are included? HDMI, USB, Audio, etc.

  Also, the "Contact/Email HP" option on the site seems broken, because some required fields have no space to fill. I tried on two different browsers.

  Ports

• All the PC Ports USB does not

  Before going away for the weekend, I turned off my PC and everything seemed fine. But after coming back, all the USB ports fail to read the devices. I ended up having to use chrome remote desktop and some luck to have access without a keyboard, but now I'm at a loss for what to do. I looked and tried several fixes, but none worked. Currently, the two "Standard Enhanced PCI to USB Host Controller" s listed in the so-called Device Manager "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) ». Any ideas would help, but so far, I have tried to uninstall/reinstall them normally and tried to delete upper and lower filters, but none were. And I can't do a restore of the system before it started, as I don't have a fairly recent recovery point.

  AHA! I managed to get into boot options advanced and done what you said (as well as what said a few other people to do using the first command prompt) to turn off the signature device, and now the back ports are working again!

  The front ports but are still stubborn (they don't even give power for what anyone plugged). I'll keep working to fix it, but right now I'm really relieved (I also went ahead and made another restore point in case things went south from there).

• I have a macbook pro with cs6 installed.  Programs were copied in my new, second computer, a mac mini.  Appears that the program on the mac mini is a trial.  How can I activate the second computer without disabling cs6 on macbook pro?

  How to activate a second computer?

  You are allowed to only install two, so you should just be able to put in your activation number. Usually there is a button saying you bought the program. Just click on it and if you should put in your activation code.

• Reflections on the single port USB - C on the new MacBook

  Personally I'm not a fan. I hope they put several on the new MacBook Pro. What happens if you plug in a monitor and an external hard drive during loading and also a key usb and SD card?

  There are products from Apple and other companies that give you more ports and capabilities that include docks for a desktop computer.

  I'm fine with things as they are, but I also have other systems. For me the point of the MacBook is something with size and weight more like a Tablet and capabilities beyond a tablet. My MacBook is new, but so far the high scores.

  So far, my experience with the MULTIPORT USB adapter - C is good.

• Unable to connect to the broadband router by wireless or cable ethernet hub is active as my xbox living works through it will need to activate the ethernet port and wireless function bt someway

  may need to download drivers

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  "Connect to a network, mail and the Internet."

  They will help you with your question in the Vista Networking Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• T450 activate the second DIMM location

  Hello

  Just got a new T450. I swapped the RAM out stock for 8 gb and noticed that there is an another DIMM slot next to him. I tried to paste in the stock 4 GB DIMMs, but Windows can not see, showing only 8 GB.

  Do I need to enable somehwere?

  Thank you

  There is no hardware switch to enable it. Install something like HWinfo32, and it should tell you about how much DIMMS are installed, which is active.

• Re - activate the AutoPlay for USB (option-list in right click) device

  Win-7 - 64-bit, 16 GB RAM, SSD drive (C)

  All of a sudden, when connecting a Flash stick or Player cards and just clicking on... the function "Auto Play", with the drop-down list - is GONE!
  I used to go there, select "Download images with Adobe Bridge" - to transfer images in bridge
  I read that the Microsoft eliminated the AutoPlay for security reasons... feature updates?
  Please see also this link: (I'm I was wondering if it is save to do as suggested below.) (or any other suggestions?)
  I checked my: his game to 0x000000FF (255)
  Thank you

  In the following registry key: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer and possibly (but not necessary in my case) in: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

  The value:

  "NoDriveTypeAutoRun" set you 0x000000FF (255) which I discovered disables Autorun on all devices.

  Set this value to decimel 145 (the default value).

  Another value (I have not confirmed that they are correct)

  0x1 disables autoplay on drives of unknown type. 0x4 disables autoplay on removable drives. 0x8 disables autoplay on fixed drives. 0x10 disables autoplay on network drives. 0x20 disables autoplay on CD-ROM drives. 0x40 disables autoplay on RAM disks. 0x80 disables autoplay on drives of unknown type.

  0xFF disables autoplay on all types of readers.

  Hello

  The function of auto run if not used correctly could lead to the breach of security. That feature could have been disabled by an update, there are still options made to enable it again. He has the discretion of users to use it again or not, based on how often or more often they use the service. As you already know, there is section that will allow you to disable or enable the feature by using Fix - it.

  Thank you.

• How can I activate the second kernel on Intel Dual CPU E2200

  Hardware Diagnostic Tools 5.1.4861.15 States onlky processor has 1 active core.  Drivers for the two nuclei as they run.  PC runs more slowly when you run the diagnostics.

  Hi Beach Guy.

  What does the the Task Manager (return button) on the processors?

  Open the RUN and enter the following information: MSCONFIG

  Go to the Advanced tab and make sure that the number of processors in unchecked.

  

• Using the second ethernet port to connect to the printer?

  Hi I have a Mac Pro 2.1 old school and I'm wondering if I can connect to the network with an ethernet port and connect the latter to a printer?

  If so, how?

  Yosemite running.

  Thank you

  Physically, you use a port and a cable to connect to your network and use the second port and a second cable to connect directly to the printer. The printer must obviously have an interface Ethernet himself.

  However, you need to configure the second port on the Mac and the Ethernet port on the printer for each manually configured the TCP/IP addresses and these should be in a range of different network to your main network.

  If you the main network is something like 192.168.1.1 then your printer and the port on the Mac connection to this need to be in another network, such as 192.168.11.1.

  In theory, if the printer supports Hello aka. mDNS, then maybe you can get away with not having to configure TCP/IP addresses for the connection.

  The main reasons to use a second separate connection as this would be the performance or security, and frankly I don't think that's really relevant here. This would mean that no other computers on your network will be able to access the printer.

• Satellite L650 - no signal on TV via the HDMI port

  Hello

  I have a problem with the HDMI port. I am not able to connect the L650 to my TV. There will be no incoming television signal. The TV port is correct because I can connect my digital camera without any problems. The HDMI port is not displayed in the hardware Manager. I don't use the version of windows 7 that has been installed originally. I formatted the disk and have reinstalled a different version of windows.

  Do I need a special driver to activate the HDMI port? I just installed the ATI catalyst driver. If you would like more information, I'll try to give them as soon as possible.

  Thank you very much for your help

  Hi song2.

  > have reinstalled a different version of windows.
  And what version of Windows you have right now?
  You have yellow exclamation points in the Manager of devices or unknown devices?

  In general there is no driver special HDMI port. If you connect your laptop to TV/monitor external, you must press the FN + F5 key combination to switch between monitors.

  Check it!