700 AIO monitor display problems

I got a Lenovo Ideacentre AIO 700 for Christmas and once through the initial updates after a black screen reboot, when I connect it to my TV it will go through my tv, but no more detects any other screen, how can I go back on the screen of computers?

In response to customer relationships of the black screens intermittent when the 700-24ISH AIO devices are turned on, Lenovo comes from Lenovo IdeaCentre AIO 700 scalar fonts improved Firmware to solve this problem.

The CONSULTING Service is available here: https://support.lenovo.com/us/en/documents/SF16-I0006

The firmware can be downloaded here: http://support.lenovo.com/us/en/downloads/ds111714

Thank you

Tags: Lenovo Desktops

Similar Questions

  • old PC, new monitor display problems

    Just bought a new monitor for my old Presario SR1500NX, but I can't adjust the screen resolution of 1600 x 900, who wants my monitor - it has a maximum setting of 1024 x 768. (Monitor = from HP2009m, widescreen) The graphics in my PC is "VIA / S3G UniChrome IGP. When I go to the tab view S3 it shows "Display devices" like an old CRT monitor, which I did not. I was using an older 17 '' LCD monitor 4:3 in the last 3 years, & it worked out of this video card, but my new widescreen monitor display is "stretched veeerrryyyy." I think I need a new "video card", correct? If so, can you recommend one if I can buy and install it (I printed installation instructions of a new video from the HP Web site card for my PC). I'm kind of smart with the software, but not the hardware side of computers. I installed more RAM on my PC, so I'm not familiar with the inside. (And no, I can't afford a new computer right now - I know that mine is old, but it works perfectly for my needs, I wanted just a new, larger monitor!) Thanks for any help you can give me.

    AG, here is a video card that should work with your power supply and a new monitor.  It is not a barn burner, but a lot more than the maximum resolution that is required to run it.  It is said that the minimum power is 300W.  However, manufacturers tend to overstate the power requirements of their cards.  Read the customer reviews and specifications on the product Page.  This will give you some good information.

    The card should improve the performance of your computer, too.  It will free the system memory that is shared with the video chip and add video memory on the card itself.  You could improve the memory to 2 GB to increase performance even more.

  • External monitor display problems with Dynadock U10 on PC Toshiba laptop Win7

    I just started with my current compnay and they allocated me a new from Toshiba Satallite laptop running with Windows 7 64 - bit operating System.

    They hooked me up a Station of reception Dynadock U10, separate keyboard and a mouse and a monitor external 22 ".
    I experienced a problem of compatibility with some software, but I currently have a major problem with slow internet pages freezing or general display issue when the VGA is connected to the docking station.

    The laptop works fine when the VGA is connected directly to the laptop. I have download the recent software/driver upgrade loaded 18 (TC30322400A) without fixing the problem.

    I also loaded the upgrade diplaylink 5.6.31548.exe, as mentioned in other forums, once again, without success.

    Any help would be appreciated.

    Alex

    Are you using the latest driver?
    In my opinion you should not update BIOS.

  • monitor display problem - says he will sleep when it is turned on.

    Problem: the original title screen

    Turning on my computer - screen trying to start up then he said monitoring sleep - he brought once but the screen was skewed.  my monitor is fine - I have it plugged into another computer and it works fine.  would it be a virus or a video card?  should I try to hit the f8 key during startup to go to safe mode or just take it to the computer store?

    Hello

    · What is the number and model of the monitor?

    · Do you remember all the recent changes on the computer before the show?

    · What is the service pack installed on the computer?

    · Have you defined a plan of the power on the computer?

    Check the status of the graphics device in Device Manager. Follow the steps for the same thing:

    a. click on start

    b. click Run, in the Run dialog box type devmgmt.msc

    c. in the Device Manager window, locate the video drive and expand the drive, double-click the sub element to check if an error message or error code is listed.

  • Monitor display problems

    Hello

    I was using my laptop (Dell Inspiron 1720), and somehow I pressed a few buttons that transformed my horizontal office on the screen. How can I fix it.

    Mozartman

    Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

    If this does not work: right click on the blank desktop-> Graphics Options-> Rotation.

    I hope I could help

  • There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

    There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

    Apparently, you're trying to use AirPlay to display content that is protected in a way that not only allows the copy.

  • Re: Tecra S5 - 15 q - monitor display lines vertical and error 43 for GPU

    After about 5 years my Tecra S5 is experiencing problems with its graphics.
    Most of the time the (internal and connected an external via VGA) monitor displays vertical lines, and windows gives an error 43 on the map.

    I was wondering if there is a way to solve this problem, and if this problem could be solved under warranty (although the protohistory of the warranty expired 3 years ago.) .

    In my opinion, it is bad material work and as far as I know only way to fix it is motherboard Exchange. I n t have this model of laptop, but I can presume that the GPU is fixed on the motherboard and cannot be traded separately.

    Fixed under warranty? Of course.

  • Display problem on my A60 Pro Sat

    The display on my satellite A60 pro features a strip of wide pixelated of 6-7cm at the bottom that hides my mouse cursor and the taskbar. The mouse is still active behind it. Mode full screen using an external monitor is seen. The group changes with my office window or active but is just vertical color bands. What is the problem and can get rid of him.

    Hello, Robert

    Have you changed anything on your device or this occurs suddenly display problem?

    I'm really in idea. If you want you can reinstall the unit with recovery DVDs. If the problem persists it is obviously a malfunction of the display. In this case, you must contact partner in your country.

    If there is some serious hardware issue please let us know.

    Good bye

  • Portege R600 - display problem device change Utility

    We started to use computers laptop Toshiba Portege R600 series on my place of work. All laptops are home in a Toshiba Slim Port Replicator II. Laptops are all running a version of Windows XP Professional with Service Pack 2 applied (and of course a few customization business).

    The problem is with the display on the external monitor. The laptop starts according to the normal and connects to the fine. The Fn + F5 key and so we can switch between the external LCD screen and the laptop monitor. We can also extend the desktop on the external monitor without problem.

    The problem occurs when the laptop is not docked since the Replicator. After having similar problems with R500 series laptops, Toshiba following applications have been installed:

    (1) common modules (version 6.06.01)
    (2) controls Toshiba (version 3.31.3800)
    (3) button ON / OFF (version 2.5.1.0_IS115)
    (4) Toshiba utility (version 4.30.18)
    (5) Toshiba screen device change Utility (version 2.5.0.0)
    (6) Toshiba Hotkey utility for display device (version 3.4.5.5)
    (7) Toshiba Mobile extension 3 for XP (version 3.87.00)

    We now have the following symptoms:

    (1) detach, the "gear" icon appears and then the error "TOSHIBA Display Device change Utility is not installed correctly. Please install TOSHIBA screen utility unit of change. "
    (2) for the mooring of the laptop again, we get the "home" icon, and then the same error.
    (3) after that, the external monitor does not become active once again, until what you press Fn + F5.

    I have tried uninstalling / reinstalling the TOSHIBA screen device change utility. Have tried to remove the Mobile Extensions and install the software, tried a number of different things to make it work. Rebuilt 1 stop working and everything was installed in the order above without success. In fact, noted that during the installation of the TOSHIBA utility screen device Change the Setup screen starts and runs, but the window does not uninstall.

    This seems to be a driver problem with those from Toshiba, but I'm not sure. Someone at - it suggestions regarding this? The drivers that I use are on the site of Toshiba Australia (even if they are the same drivers found on the main website of Toshiba). The link below.

    http://www.ISD.Toshiba.com.au/71/live.dll/topic/content/driver_search_list.jsp?BV_SessionID=@@@1187200925 .1241154604@@@&BV_EngineID=ccccadeglfeghejcefecek fdffhdfgh.0 & theAction = true & CATOID =-15058 & MODE = NPRO & ProductMenu_0 = Notebooks & ProductMen u_1 = Portege & ProductMenu_2 = 1509603 & x = 22 & y = 7

    Post edited by: Will-SOE

    We have tried this on a couple of machines that are the same exact specifications. The model that is sold in Australia is a Portege R600, model PPR61A.

  • Toshiba Portege R500 - external display display problem

    At my work, we have a number of series laptops Toshiba Portege R500. All laptops are home in a Toshiba Slim Port Replicator II. Laptops are all running a version of Windows XP Professional with Service Pack 2 applied (and of course a few customization business).

    The problem is with the display on the external monitor. The laptop starts according to the normal and connects to the fine. The Fn + F5 key and so we can switch between the external LCD screen and the laptop monitor. We can also extend the desktop on the external monitor without problem.

    The problem is that when the disconnection of the laptop computer to the port replicator, when the laptop is brought back, the display of the external monitor does not display anything. The monitor receives a signal that we don't get errors about "cable disconnected" etc. By bike by Fn + F5, the monitor will go to sleep (as the adjustment is only to be on the laptop screen). By pressing Fn + F5 again, the monitor seems to wake up but there is no display on the external monitor.

    The only resolution we have found because so far, it's to stop & restart the laptop and the external screen works again. However detach and the problem occurs again.

    Thought this might be a driver problem or a problem of Toshiba Utilities, so have updated the drivers accordingly. The drivers installed by default are the Intel 945 Express 6.14.10.4837 driver version. I tried to update the drivers for the next version (using drivers from the Web from Toshiba site) and changes to the version of the driver 6.14.10.4631. I also tried the Intel driver version 14324.

    I also installed the Toshiba screen utilities and shortcut keys to see if this may have an effect, but unfortunately not. I also tried to change the BIOS settings for the display of 'Automatic Selection' to LCD + CRT RGB, and once again it has no effect. I also tried several configurations in the "display settings" does not.

    Is this just a design problem? Is anyway to fix that?

    Hello

    I Portege R500 in front of me with the same port replicator and 21 "Toshiba TFT display (connected to the DVI port on the Port Replicator).

    Please open "Toshiba Mobile Extension" utility (you can find it in Control Panel), then click on the second tab > change of display service.
    If please activate this service and choose your preferred display output.

    I tested it 10 minutes ago and it works perfectly.

    Good bye

  • Satellite L850 - display problems external 1080 p

    I did turn my laptop Satellite L850 via HDMI to an external monitor without problem for many months.

    A couple of weeks, I tried to update the catalyst driver and have had problems since.
    Basically now when I select mode 1080 p via the Catalyst Control Panel, it makes the screen flash and present vertical lines.

    Occasionally, it will work for a short time, even up to a full day and it will randomly start once again. I can play a game in 1080 p mode and it will be totally random, sometimes which allows me to play for hours without having the screen flashes black while the other times, it starts flashing constantly and the only way to fix it is to reboot or pull the HDMI cable and plug back and cross your fingers you have enough time to reopen the catalyst and change in 720 p which is always stable.

    I tried:

    1 using the AMD catalyst removal tool and resettlement through the catalyst of origin Toshiba drivers factory default
    2. use to restore the system to go back before I made the changes
    3 using the removal tool from AMD Catalyst and update to the latest version via the site Web of AMD.
    4 reinstall my chipset with #1 drivers
    5 tried another monitor (still happens)

    On a side note, whenever I use the removal tool it removes my USB drivers too and I have to reinstall.

    The current graphics driver is AMD Radeon HD 7670 M and I also tried the solution on here http://www.mytoshiba.com.au/support/item/781 tech support forum.

    I ran out of options other than a full format and reinstall I want to avoid if possible. Any suggestions would be greatly appreciated.

    Thanks in advance

    Hello

    The AMD Catalyst (control software) update would not solve the issue.
    You need to update the graphics driver too!
    The graphics card driver can be uninstalled in Device Manager!

    I found also this Toshiba document to similar topic which appeared after the phone woke from sleep mode.
    [After sleep mode, a distorted image or a split screen may be displayed: http://aps2.toshiba-tro.de/kb0/TSB3903IB0000R01.htm]

    This problem was caused by the display AMD. V9.12.0.0 driver, which was automatically installed through the Windows Update feature.

    Download and install the driver of Toshiba page of European driver that should solve the issue of the line

  • The satellite M60 display problems

    Hello

    I bought a satellite M60 a month ago, and since then, I've been strugling trying to solve a problem that has to do with the display (ATI 700 X mobility).
    When I play some games (the dawn of war, Unreal tournament...) the computer freezes completely, I actually have to force stop it to restart.
    Another problem, that I have seen is with Mixmeister Pro 6, the video playback is erratic, it is as if the computer is unable to handle any overload.

    I tried the upgrade of drivers, nothing works, then I installed the third party Omega drivers, but once again, nothing to do.

    Since the purchase of the M60, I had to correct problems of Wirless and PCMCIA card through driver updates, but there is nothing that I'm be able to do to resolve this display problem.

    I am quite convinced it's a driver issue, but then again, nothing is certain.

    If anyone can help me please I'm getting desperate.

    Hello

    Well, it's not easy to say why it happens but one of my friends has sometimes even appearance but on another unit. If he plays a high-performance games unity cling.
    In my view, this could be a heating problem. Playing games is hard work for the laptop, because all parts (bars of memory, processor, graphics card, etc.) work with max performance and produce a lot of heat. Most laptops are not developed for this.

    However, you should always use the graphics driver from Toshiba. I found the latest version of 15/07/05. It is a display 8.121.050.322A driver. In addition, you must install latest DirectX. I think that it s a 9.1. Check whether the fixes for these games are available.

    Second, if video playback is erratic, it seems that the OS is fully committed.
    In this case, you should check the processes that run in the background of the operating system.
    In addition, try to defragment the HARD disk

    Good bye

  • Display problems with the Portege R600 and Win 7

    I have a R600 running windows 7, every two minutes, I have a display problem where where the vertical pixels seem to get every centimeter unaligned, so my screen seems to blur digital in bars across it.

    I have an external monitor attached and get the same problem with or without him. I have tired the driver of toshiba and intel driver.

    It seems to go away if I have windows min and max, but sometimes it doesn't. If I run my mouse an affected area, that it seems in trouble and sometimes it's not all screen.

    A refresh solves it.

    Anyone have any ideas?

    > I have an external monitor attached and get the same problem with or without him.
    Maybe I m wrong but in most cases if these symptoms are seen on the two displays (internal & external) then a graphics chip could be affected
    It would be the worst case, because that would mean that the motherboard needs to be replaced

    But just a question; have you noticed that using the previous Windows OS preinstalled by maybe Toshiba (Win XP or Vista), you must install the image of Toshiba again to verify if this display problem is still visible

  • X 1 carbon display problems

    I used to use the carbon X 1 with duplicated to a Dell monitor display. It has stopped working. Only the display of the laptop is now available with the Dell monitor in port HDMI is not recognized. The display on the laptop doesn't have the correct resolution and overflows the bottom of the screen. The display resolution can be changed (greyed out). Any suggestions on how to fix this?

    I managed to solve this problem by removing the Dell Device Manager display driver. and then re-start.

  • Monitor the problem flashing on the reactivation of the computer.

    Monitor the problem flashing on the reactivation of the computer.

    I have a new HP laptop G60 - 243 CL of Costco and a new HP W2207h monitor. The screen flashes when the laptop wakes fashion "sleep" with the HDMI cable connected. It works very well with the VGA cable. Any assistance in finding the cause would be much appreciated. Here is my hardware spes and a newspaper detailed observations.

    Thanks in advance,

    Paul

    --

    HP W2207h monitor

    680 x 1050 hz @60

    Laptop:

    HP G60 - 243 CL

    AMD Turion X 2 RM - 72 2.1 GHz

    3 GB RAM DDR2

    320 GB SATA, 5400 RPM HARD DRIVE,

    NVIDIA GeForce 8200 M G, with up to 1407 MB total graphics memory (shared).

    16 "16:9 1366 x 768 display

    Drive x drive LightScribe 8 with support double layer
    HDMI

    Here is my log.

    25/01/09

      1 unpack the monitor. With mobile connection cables on: HDMI, USB, power Turn on the monitor. It flashes. Black for about 2 seconds, then the light for a split second, repeat, ongoing. Turn off monitor, the driver of the CD W2207h monitor, restart. Monitor works normally.

    The monitor HP w2207h Readme says driver using driver Nvidia 10.65 or later version.

    The Control Panel on the computer laptop G60, NVIDIA GeForce 8200 M g: Device driver 7.15.11.7614, 11/07/2008 (this is the latest driver from the HP support page. See on 27-01-08 below).

      Install W2207h Monitor driver CD and restart the computer. Control Panel, device, Manager I see two monitors, the two "monitor PNP generic", first Hardware ID "MONITOR\HWP26A8", the second "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.

      2 put the laptop into sleep mode. Wake the portable computer and monitor flashes market, as described in (1). Image appears normally while the monitor is turned on for fraction of a second intervals. If reboot laptop, follow the work properly.

      Occasionally, flashing monitor heal without rebooting. Out of about 10-15 tent: once the monitor began to function properly while the computer shuts down. Once the monitor was OK on the reactivation of the laptop. Once, while the screen flashes, I removed the USB cable and the monitor started working. None of this is repeatable.

      3 removed the HDMI cable and started using the VGA cable and an audio cable. No more flashing on the reactivation of the computer. Very repeatable. About 7 7 times.

    01/26/09

    Control Panel, two monitors, Device Manager, the two "monitor PNP generic," first of all we have the Hardware ID "MONITOR\HWP26A8", second is "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.

    27/01/08

    Download NVIDIA drivers

    Downloaded from Nvidia support: Version 179,28, 2008-12-18, 179.28_notebook_winvista_32bit_beta.exe Beta (attention: are not supported by the laptop to the manufacturer.)

    HP support: Version 7.15.11.7614 has, 2008-09-08, sp40385.exe (same version that is installed.

    Version of the driver installed is the same that the one on HP support site, so did not not update driver.

    w2207h monitor download driver

    Download and install A Rev 2.0, 4.0.100.1189, 2008-10-16

    Version of the file now reads 6.0.6001.18000 (longhorn_rtm.080118 - 1840), I think it's the same as the driver already installed.

    Flashing problem is unchanged.

    end

    It was the monitor! I brought my laptop and a HDMI cable at Staples where I bought the monitor and tried on the w2207h on set. It has worked well. Took the phone in and out of fashion 'sleep' several times. I'm in the store week return policy 2 stables will replace it. The seller was very accomodating to let me try different monitors with HDMI and VGA cables and my laptop while I was there. I even brought in a large piece of cardboard to protect the ceiling :).

Maybe you are looking for

  • Call Testexe with TestStand 2014 command line

    We are modernizing our Testsuites to TestStand 2014. When I want to run a movie with Testexe from an external batch file using the entry Point 'Test DUT' I get the error (see attachment file) 'Test DUT' entry point does not exist. Invalid or out of r

  • TestStand API: Define the relative path

    Dear community NOR! Could someone, please, with the following - is there an option to set the path to code modules, within the test sequence, to have a relative path, but not absolute? I add programmatically in code modules to the steps of the sequen

  • Set up the device to simulate in MAX

    Hi all I am currently using an executable to control some hardware. The .exe has limits of security built - it reads some sensors using digital i/o - and if they are in the bad condition my operation aborts. This works perfectly if I have the system

  • Re-install XP on laptop

    I'm trying to re - install xp on my compaq presario v6130us, but whenever the computer reboots to continue the installation, I get this window of restoration of the Compaq PC that opens and makes me insert Recovery Disk 1 which I did not. Is there a

  • M630Z scan colors are not yet close to being accurate scans colors

    We care about trying to use our M630z to make copies of our our magazine through the Save to the network... option scans Save fine... but the colors are SO out of being specific and we cannot find anywhere to adjust the tones of colors... our portabl