700 HP printer/fax machine: HP's model 700 printer/fax machine have a hard drive?

Similar Questions

• Cloning a virtual machine with 2 hard drives!

  Hi all!

  I ran into a very annoying problem. I'm trying to Migrate/convert virtual machines to a host in the CR. Each virtual machine has 2 hard drives which are located on 2 different data stores. When I try to migrate or to clone virtual machines from the host on my Cluster I get an 'error of operation period.

  After scratching my head for a while, I discovered why. The virtual machine have 2 hard drives on 2 different data stores. Both flat.vmdk files are called eponymous because they are on different data warehouses (TTDC001.vmdk). I created a VM test on the cluster with 2 hard drives and flat.vmdk flies are named TTDC001.vmdk and TTDC001_1.vmdk.

  So my conclusion as to why I get "Opération Timeout Error" is that VC trying Migrate/Clone to the virtual machine but is mistake because his attempts to migrate/Clone 2 hard files with the same name!

  Can someone give me some pointers as to how I can get around this? I am currently copy the file hard 2nd to my deskop from the data store and rename it then copy him on the new cluster data store to see if it works as you cannot rename the file hard in the data store. It just seems long way round to migrate virtual machines with 2 hard drives, and I don't even know if it works!

  Please help!  :|

  Andy Hughes

  Andy of the evening,

  I do it well. Thank you for asking.

  So if I'm reading correctly it seems that you are trying to clone a virtual machine from a stand-alone host to a host that is part of a VMware Cluster. When you do this you get a network midway through the copy error. Is this correct?

  Can you confirm how fast is connected to the Service Console between the two servers? For this kind of work I would recommend making them run at 1000/full, assuming you're not already. Could you also post the entire message that you get when the clone fails.

  Kind regards

  Glen

• HP G62-355DX: recommend some course HP laptop model that can be used the same hard drive using G62-355DX?

  I have a HP G62-355DX dead, I think the hard drive is ok, so I want to buy a new laptop HP to change the hard drive, so I can recover my data and OS environment.

  Could someone please recommend some course HP laptop model that can be used the same hard drive as G62-355DX use?

  Even the hard drive can not put it in the bag laptop, but work with the HARD drive interface.

  Or is there any external HARD disk enclosure can be used to read the data hard disk, the data does not have compreesed.

  Thank you in advance.

  Hello! You need a new PC Yep!
  But there are other ways to do

  You can buy a SATA USB adapter that will allow you to plug in the HARD drive on another PC and the take-off data

  NOW YOU CAN ONLY SAVE DATA FROM THE DISK IF THE HARD DRIVE IS NOT DEAD

  Good luck!

  Best regards: 1029rjmenvy17t

  Please "KUDO" if you like for thumbs to the top and "Accept as Solution" if this fixed your problem

  To help others find it and helps solve them the same or similar problems

• Printer Dell v 715 w have a hard drive?

  I saw a report on CBS news that copiers have hard drives must be removed prior to disposal. Home printers that I also have hard drives? I replaced my printer soon. Thank you!

  phitauken,

  Dell inkjet printers do NOT have a hard drive, so there is no worry about trying to remove it.

  Most of the printers that have a hard drive are laser printers.

  Rick

• How to print the contents of a hard drive?

  Title: list of files on a specific drive.

  How to print the contents of a hard drive?  I would like to be able to remove the old files, but it would be easier if I could print the content rather than scroll through the file by file.

  Hello

  These should help:
   
  How to save and print a list of directory for a file and the folder of Vista (Windows 7 is the)
  same)
  http://www.Vistax64.com/tutorials/114593-file-folder-directory-list-print-save.html

  How to add view and directory of print in the context Menu in Vista and Windows 7 file
  http://www.Vistax64.com/tutorials/146031-context-menu-add-view-print-file-directory.html

  Use this free program which is great:

  KarenWare - printer - free directory
  http://www.KarenWare.com/PowerTools/ptdirprn.asp

  How to add the feature print directory for files in Windows XP, Windows Vista or Windows 7
  http://support.Microsoft.com/default.aspx/KB/321379

  I hope this helps.

• Create new virtual machine of the model that have two hard drives in the different data store

  We do VM deploy automation with PowerCLI.

  There is already a model created with at least two hard drives to one side and each hard drive belong to difference datastore,

  In the model's operating system is Windows server 2008 R2 already installed VMware Tools and other software in the second (other than C: driver) driver

  We can successfully deploy a new virtual machine with this manually with vSphere client model.

  But when we try to make the deployment with PowerCLI, can not find examples of similar scripts in the document of reference,

  and we also google this question, still no similar question was found.

  Is this possible with PowerCLI? If it's possible could you give me some advice or an example of script, thank you!

  Best regards.

  I already found the solution.

  With the vSphere SDK .NET API, we can create the new virtual machine to the model

  Mainly used API listed below, sorry because I can not give the source code here.

  • VMware.Vim.VirtualMachineCloneSpec
  • VMware.Vim.VirtualMachineRelocateSpec
  • VMware.Vim.ManagedObjectReference
  • VMware.Vim.VirtualMachineRelocateSpecDiskLocator
  • VMware.Vim.ManagedObjectReference
  • CloneVM_Task

  For reference, you can take a look at this post and this post

  LucD , thanks for your help!

• How to set up Time Machine via a HARD drive connected to the USB port on the router?

  Hi all

  I have an Arris Touchstone Data Gateway DG1670A/TW for my internet / wireless which was provided by my ISP.  There is a USB port at the back of the router and I was wondering if I could connect an external HARD drive to save the two Macbook Pro that I have in my house through Time Machine wireless?  If Yes, could someone provide me the details regarding how to set this up properly?

  I too, was thinking about making a 4 TB HARD drive - 2 and wanted to partition so that half of it would work for Time Machine and the other half I would be able to store photos that I take on my digital SLR and are in Lightroom.  Could this be a problem at all? I partition? or Time Machine just to use the available space and delete older backups to make room for additional photos?

  Thanks in advance for any help.

  A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine.

  Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification.

  Apple does not endorse any device third-party network for use with Time Machine. See this support article.

  Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

• Time machine backup external hard drive

  Hi all

  I'm looking to move my iTunes library to a new drive external hard to free up space on my iMac storage internal 1 TB drive.

  My concern is the Machine of the time's up, is it possible that I can set it up so it will save the new external hard drive which will be my iTunes library folder?

  I am currently using Time Capsule with my iMac, but wonder if I can use it with the external hard drive.

  Any info or advice would be great.

  Thanks in advance

  Backups Time Machine is up as the startup disk (which is actually a volume and not a disc), it backs up external drives or other volumes on the internal drive.  If you want to save to an external drive to a Time Capsule and then use Finder to copy the files or search for third party software that automatically copies files.

• It seems my time machine and external hard drive are wiped clean this morning I started my computer. Is there a way I can know for sure if anything is salvageable?

  I started my iMac this morning find a message that I didn't stop my Seagate external hard drive properly. I always just shut down my computer, I do not close the hard drive first. Now the computer says disc is not readable by this computer. Looks like it's a goner but maybe not, I don't know. I can't tell if it's the same thing to my Lacie Time Machine. There are no backups on it. How will I know what to do? Nothing is salvageable?

  

  Try to run a disk utility to repair your disk of TM. It seems that there are 757 GB of backup data it me.

• You can use migration assistant to transfer the time machine backup external hard drive?

  Hello. I just bought a new macbook pro with a 256 GB flash drive to replace my previous macbook pro that had a breakdown of all the systems. My problem is that I have a time machine backup that is greater than 256 GB (it's almost 450 GB) and I try to find out if I can use migration assistant to transfer all the content directly on an external hard drive, then move the content I want on my hard drive from the external hard drive? My goal is to let my music and photos on the external hard drive and for all port hardware I need for work.

  I don't have access to another mac with storage well enough that I have the old HD so could potentially be installed in an external enclosure and extracted files directly from there if it's easier.

  What I intend to do in the long term is to buy a big external hard drive network and put all my photos, music etc over there and use the laptop as expected - that is for files from day to day - then it will be just a short-term problem.

  Any advice would be really appreciated.

  Thank you

  Nick

  Migration Assistant is user to transfer data from one computer to the other.  If I read your post correctly, you want to copy your data from Time Machine on another HARD disk.  Thia may be useful:

  http://pondini.org/TM/18.html

  Pondini website covers virtually all aspects of Time Machine.

  Ciao.

• How to completely remove backups Time Machine from my hard drive internal?

  Accidentally, I chose my internal hard drive as a backup to the location for Time Machine. Now I use an external hard drive for this but somewhere on my drive hard it is a file left behind. I can't find! The problem is, I can't update my OS because it gives me the message "cannot be updated because the disk is used for TM backups.

  OS X - cannot install on a volume used by Time Machine for backups

• Restore the folder from Time Machine backup external hard drive

  Hello world

  I have a folder of music that is 600Go and has been saved on Time Machine my previous internal hard drive in the iMac.

  Ive since upgraded to SSD and do not want to want to restore this music folder on my new SSD due to its massive size.

  Is there anyway I can restore the folder music of time machine on an external hard drive?

  This way I can still recover my music collection but away from the internal SSD.

  Any info and advice would be great.

  Open Time Machine

  Navigate the backups to find the music folder

  Click on the music folder to highlight

  Click on the gear at the top of the window icon

  Click on "restore to".

  In the next window that appears, locate the hard drive

  Click on the hard drive to highlight

  Click on choose

• IMac running el Capitan will not save time machine on external hard drive

  Since the installation of El Capitan, my time machine not backup external hard disk.  I have tried to turn off the drive and restart, deselected as the HARD drive, and then restart.

  What happens when trying to Time Machine backup?

• Cannot access my backup time machine on external hard drive once I changed my hard drive

  Since I changed my hard drive on my mac pro book I can't access the time machine back up on my external hard drive. All the shows when I connect the hard drive, but I can't access it.  Any ideas?

  I use El Captain MacBook Pro (15-inch mid-2012),

  By changing the hard drive, you have also lost all preferences, including those for Time Machine. You can have success by cloning back from the old system to the new drive to get back them.

  Or, simply erase the backup drive, reconfigure Time Machine preferences, then let time Machine do a new backup.

• Time Machine backup external hard drives

  I've been using Time Machine to back up to an external hard drive.  External hard drive backups are visible in TimeMachine when the external hard drive is connected to the computer. How can I see the backups if the external drive is lost?

  External hard drive backup is buried in the backup.

  http://pondini.org/TM/32.html

  I strongly recommend using an alternative backup software like Carbon Copy Cloner. Allows you to separate the backups. Time Machine does not work.