7140 WiFi Dell's place 11 Pro becomes disconnected during the sleep or awake from slumber

Similar Questions

• Changes of Dell place 8 Pro camera resolution during the video conversation

  During Skype call for example... I make the call and see my video overview as in the illustration on the left, but when the remote side answers my call my video changes such as the illustration on the right and that's what sees the remote side. So I need to get out of myself for them to see me! Is there a reason for this? Or any workaround, solution? Or a driver issue _ you can experience the same thing with the Skype App Store. There are other Windows tablets that I use and none of them do. Thank you.

  

  For Hangouts, change the resolution of the HD to SD in order to solve this problem.

  For Skype desktop it doesn't seem to be an option to set up the webcam.

  For the modern Skype App (Metro) the web cam appears by default to the correct settings.

  From what I remember, the drivers work differently for native/legacy apps vs modern/metro apps.  Until an updated driver is available, or there is another (another Tablet with the same hardware) is what it is.

• My book for Mac 2015 becomes hot during the game.

  My MacBook 2015 becomes hot during the game. Is this a problem?

  Depends on heat, it gets. It is normal that some video games place a demand on the CPU and GPU, so you can keep track of the temperature. A good and free app for this is temperature monitor.

• Satellite Pro A110 crashes during the transfer of the large data in LAN

  Hello

  My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

  Thanks in advance

  Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

  Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

• Intel Centrino Advanced - N 6235 problems with Dell XPS 12 (Windows Pro 8, "disconnect / media disconnected")

  I recently bought a 12 XPS with windows 8 x 64 preinstalled. I was not able to maintain a stable connection to my WLAN. However, 7 other devices (laptops, etc.) are all connected without problem. Only the troubled computer runs W8. I have the latest drivers for the Centrino chipset and the ProSet (and everything else) download from Dell on March 14. Sometimes it connect, but after a few minutes it disconnects again. Sometimes I media disconnected and other times a limited connection where the DHCP Server data could not be collected. Seems very irrational!

  The configuration is default Dell. Any ideas?

  I downloaded the latest drivers from Intel and a clean installed (actually it didn't work after 3 installs!) I also changed the channel on the router to 11. Now, it seems to work. I suspect that the problem is caused by the driver in W8, but never less the drivers provided by Dell did not

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• Satellite Pro L100 - Crash during the update of the Bios

  Hello

  I am the owner of a Satellite Pro L100 (PSLA4E)

  On the Toshiba site I downloaded the BIOS update. While installing I read that it was necessary to supply cable is plugged. Before I could cancel for the cable, he had started and then frozen. The computer stopped working and so I turned it off! Since then, I've read that it was a very big mistake!

  When put on the fan starts and I can hear etc cd drive spinning. After 15 seconds, the screen is blank, the computer starts beeping!
  Is there a way to solve this?

  Thank you very much
  Rich

  Hi Richard

  Seems not good buddy from your description, that something went wrong during the update procedure and now the ROM module has been flashed properly.

  Maybe you area lucky man and the motherboard isn't too bad, but only the Rom module must be flashed again.

  Unfortunately, this must be done by the technician of the ASP. You will need to contact the ASP in your country for assistance.

  Good luck and have a nice day

• Reference Dell backup and restore - "an error occurred during the creation of the backup of the system"

  I have a Dell XPS-8700 running Windows 7.  I bought the Dell Backup and Recovery Premium Edition.

  I was able to create a backup bootable (hot spare), and I can create a backup of data on my external hard drive.  However, whenever I try to create a backup on my external hard drive system, after about three seconds in the process, he returned: "an error occurred during the creation of the backup of the system.

  How can I create a backup of the system?  Why I get this error?

  Thanks for all the info. My situation sounds very similar to yours.

  I removed using Add/REMOVE programs in the control panel DBR and he removed cleanly.

  V1.7.1.2 downloaded and executed new facility.

  When I ran, it was my premium license key so he had yet to register and was not removed by uninstall.

  As before, Rescue Disk ran and installed the new partition (DBR_BOOT) on WD Passport.

  However, backup system immediately stopped with disconnected, missing target location or full. Tried several times...

  In any case, sounds like you have solved your problem, so you like OP should this brand this post/thread as answered. I will continue to post on my other thread.

• Dell 11 place 5130 pro 32 bit flickering screen brightness

  Hello

  Device is manufacure renovated like new they say looks like new, software was etc reset factory

  the first system startup

  I do experience flickering BOUNCING hard if I try to adjust the brightness no matter where less than 100%, sometimes the slide has no effect but after 10 to 20 seconds, the screen starts to Flash, sometimes the brightness drops lower and starts to blink... low to Hi power very quickly.

  Adaptive brightness is off everywhere

  Cooling - off Panel

  Energy saving - off

  Even in the Bios when I change the brightness level, it starts to Flash.

  Everything is up-to-date.

  Any suggestions?

  Found was a hardware problem

• Using a Dell under Windows XP Pro laptop, typing in THE results of the application in order to reposition the cursor randomly, resulting in having to re-type approximately 25 percent of all copies.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  It happens in one

  Hello T Walker

  Have you tried a different mouse, or cleaning your mouse?

  Should the mouse batteries?

  You have a pointing device? You can go into Control Panel and turn it off.

  Go to control panel / mouse, select the tab "Stick" and uncheck the box marked "Tapping."

  If this is not enough, just turn it back on.

  In Control Panel, select mouse then the pointer Options tab.

  Uncheck "enhance pointer precision.

  .

• Memory pressure becomes elevated during the closure of large applications

  I recently discovered that whenever I close any application that uses the memory, the memory pressure suddenly becomes very high and red and the system get very laggy, this last only for a few seconds which not much, but this has never happened before. After the application is completely closed, everything back to normal. below is a screenshot once I closed iMovie. Anyone has an idea about this?

  

  All these aid of Google Chrome don't look too good. Chrome is perhaps the problem?

  Also, I would check your storage media works well (check disk): as apps tend to write a lot of files when they left.

• Satellite Pro A60 crashed during the update of the BIOS

  Updating to BIOS ver 1.70 to 1.90 (from Windows XP) my Satellite Pro A60 off without any warnings. After about 5 minutes of waiting I went it. And... computer just several beeps and stops again.
  Anyone has idea what it means? Is it possible to turn it on again?

  Hi Vladimir,.

  I suspect that your BIOS is damaged when your A60 turns off. Unfortunately, this means you A60 are a failure now his POSITION leading to generate failure codes series.

  As Felix said codes tells the Toshiba Service Agent exactly what the problem is so you will need to contact them for assistance.

  HTH

• What happens to the Pro V9 forms during the upgrade to Pro XI?

  I think the upgrade to Pro V9 to XI pro, but I understand doing so will remove Pro V9 from my system.  I have several forms that have been created in V9 Pro.  What happens with them?  I will be able to change or I will have to recreate them from scratch.

  Thank you... BFB

  But... If the forms have been made with LiveCycle Designer, included with Acrobat 9, you indeed in trouble. Check.

• My Qosmio X 870 becomes hot during the WoW game - always shuts down

  Hello

  I have not had this computer for too long, and at first it worked perfectly. I have played World of Warcraft on settings graphic high and so on. But lately, especially when you play raids, it gets REALLY hot and suddenly everything stops.

  The build in the fan works. I have an extra fan under him, but it doesn't seem to help. I opened and cleaned. Made a Format C, and I have the latest Nvidia graphics drivers. I also installed the latest bios driver Toshibas website.

  I need help, because I tried it that feels like EVERYTHING and nothing makes better.
  I think that its weird that a 'powerful gaming portable' cannot take an old game like WoW, even on the lowest possible graphics settings. I feel like I've paid a lot of money for nothing... Just doesn't seem fair. :(

  Any ideas of what I can try with the computer/settings/drivers or others.

  Thanks in advance!<>

  / Chillbabs

  Hello

  Try to change the power management settings to decrease the CPU performance and increase the activity of fan cooling.

  ->-> Power Options control panel change advanced power settings
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Set the method of cooling for maximum performance of CPU
  In addition to processor power management change the State of the processor Maximum 90% - 80%

  It may be useful to keep the temperature below the critical level

• Satellite Pro A10 hangs during the installation of Win XP

  Hi guys,.

  just thouth I would ask why my new laptop will not install XP.
  Only, it crashes during installation. No n' achete purchased on this occasion, had no operating system installed.

  I wonder if it's a driver problem, using my xp disc I bought, but like I said that just, it will hang during installation.
  What I need to intergrate drivers somehow?
  I'm guessing that this is the problem?

  If so, how do I?

  see you soon

  I really wonder that your new laptop is probably produced about 5 years ago. ;)

  In any case, to install WXP use WindowsXP SP1 installations CD (factory settings). If you want to discuss a little more please explain to us what exactly is happening.