7204ed dv7 envy: Envy dv7 7204ed has a connection SATA 3

Similar Questions

• The HP Envy dv7 - 7323cl has a double hard drive Bay

  The HP Envy dv7 - 7323cl has a double hard drive Bay?

  Hello

  Yes, it can accommodate a second HDD.

  Kind regards.

• HP Pavilion dv7-7001sg: HP Pavilion dv7-7001sg has BIOS Ver F.29. but the show f.0Une HP Web site

  HP Pavilion dv7-7001sg has BIOS Ver F.29. but HP shows f.0Une Web site.
  Use f.0Une or F.29?   If F.29 where can I find it?

  (writing of the Germany)

  Hi @gdneon,

  Thank you for visiting the HP Forums! I have Germany.

  I took a quick glance to your HP Pavilion dv7-7001sg Notebook and worried with what BIOS version, you should be on. Your f.0Une system as of March 1, 2016 is the correct version, you should have.

  Please let me know if this information helps you solve the problem by marking this post as accept as Solution, this will help others easily find the information they seek.

  Thank you.

• Pavilion DV7-6195us: reliable wireless connection

  It is of a Pavilion DV7-6195us. It connects wireless to a provided Comcast router/gateway. My connection drops randomly, and my solution was to click on the bottom wireless icon to the right of the taskbar, disconnect my network, wait 5 seconds and reconnect. It is successful in 90% of cases.

  I looked in Device Manager > network adapters and see: Intel Centrino Wireless n 1000 #2, Microsoft Virtual WiFi Miniport Adapter #2, Microsoft Virtual WiFi Miniport adapt #3 and Realtek PCIe GBE Family Controller.

  This laptop was bought second-hand from a guy who did the free update for Windows 10 without doing all the preparation work. I restarted it in Win 7, 64 bit. The laptop is starting in 2012 and I did the best I could to update the latest drivers, but trying to install the latest WiFi driver gave me the message that says that the driver installed is newer than the one I tried to install. The current version of the driver is 15.11.0.7 as of 1/26/2014(Intel Centrino). I don't know why it is a #2, and I do not know whence the Microsoft Virtual Miniport #2 and #3. Their versions of the drivers are identical and are dated from 2006.

  I wonder if they interfere with the Intel N 1000? Should I uninstall them? Is there a driver later for the Centrino N 1000 found somewhere other than to HP support site?

  My goal here is to stabilize my connection to my wireless router.

  My wife's cell phone is a Dell Inspiron which is located not far from where my laptop is, about the same distance from the router, and she has no problem connecting.

  Thank you.

  @skaler,

  Sorry, I sent the graphic driver not the network driver.

  Here is the link for Intel Wireless drivers for Microsoft Windows 7 Version 14.2 Rev A sp54841

  Again, I am sorry that I did.

• I used 128 usd with my couse accident I didn't know my dads credit card has been connected, I tried glitch a game bud I used my dads credit card money was connected couse I bought something on a game and I need the money please help me

  I used 129 usd with couse anaccident I didn't know that my dads credit card has been connected

  It has been connected couse I used on another game, then its

  already connected so I need money I have not used anything else for I have buyed and I want my dads back money / my money

  Please help me

  Nobody here can help you. We are just other users as you are. You can contact the support iTunes Store here, but they are not obliged to refund you, as all sales are final in Apple digital stores. Explain what you were doing and ask for their help.

  https://getsupport.Apple.com/

• Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?

• Equium A200-1V0 - service the user profile Service has no connection

  Hey, wonder if anyone can help me.

  My laptop is not letting me log in the profiles of each user, a message keeps coming up saying 'the user profile Service service has no connection. User profile cannot be loaded. »

  I can fix anyone know? A got a Toshiba Equium A200-1V0 if that helps.

  See you soon.

  See this MS knowledge base article:

  + Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. User profile cannot be loaded.
  http://support.Microsoft.com/kb/947215

  This seems to be a known issue of Windows and you can correct that running the Microsoft Fix this problem Microsoft Fix it 50446

  Welcome them

• HP deskjetF4580 printer range has limited connectivity and uses IP 169 instead of 192

  My wireless printer has suddenly displayed the error message saying ' printer has limited connectivity. Sound by using the property intellectual 169... that is not compatible with 192... Sytems contact administrator '. (that's me and I don't have a clue!)

  I've uninstalled and reinstalled the driver of priinter, but yet, it gives the same message and will not be printed. It will print with the cable, but I want to print wireless.

  Any suggestions gratefully received!

  This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Your question belongs here: http://answers.microsoft.com/en-us/windows/forum/networking

  The presence of the "169" address indicates that your printer is not able to get an IP address from your DHCP server.  Check the network settings in the printer.

• HARDWARE ICON SAFELY REMOVE A MISSING SINCE HP PRINTER HAS BEEN CONNECTED TO WINDOWS 7

  HARDWARE ICON SAFELY REMOVE A MISSING SINCE HP PRINTER HAS BEEN CONNECTED TO WINDOWS 7 ON MY VAIO LAPTOP. HOW THIS CAN BE FIXED. ALL THE ALTERNATIVES ON THE FORUMS OF WINDOWS FAILED

  Hello

  Thanks for posting in the Forum from HP Support.

  Please, use system restore to restore your files and settings Windows system to a well known state before this "junk" change that's happened.

  Here is more information on restoring the system-> http://windows.microsoft.com/en-us/windows/what-is-system-restore#1TC=windows-7

  Instructions on its use on Windows 7: http://support.hp.com/hr-en/document/c01835735 & http://support.hp.com/hr-en/document/c01835735#AbT4

  Please, let me know if I can help you further.

• When I try to log on my user account, it tells me that the client group policy has no connection

  I have two separate user accounts on my computer. one of the accounts that I can not connect because it tells me that the client group policy has no connection.

  Hello Monica,.

  -What is the exact error message you get?

  -Is your computer connected to a network of area?

  Follow the instructions on the article below to perform a system restore.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765/en-us

  Hope this information helps.

• Installed Vista Ultimate windows! and now my drivers must be updated and can't do the Internet WiFi the cause has no connection?

  Original title: installed windows vista Ultimate edition!

  Hi, can someone help me I installed windows vista 32 bit full on my hp computer and now my drivers must be updated and I can't get on the network internet WiFi the cause has no connection? I basically can't no internet at all what I do? Help, please? or if I can restore my computer back to get my files and original programs?

  Use another computer to access the HP website and download the drivers for your Windows Vista computer model.  Transfer them to your computer using a USB stick, external drive, CD - R, etc. Boulder computer Maven
  Most Microsoft Valuable Professional

• I also, I get the error "the service user profile Service has no connection, failed to load the user profile" but I have not been able to correct the problem by following the listed solutions.

  I got the error "the service user profile Service has no connection, failed to load the user profile" when you try to use my desktip.  It is on the login page.  My account icon loads and the guest account. I have enter my password as an administrator and get the error message listed above. I followed all the solutions I could find and it is not corrected.

  I have a slight hitch, after several failed here, I checked the domestic Group on my laptop and I have high listed as connected to the Group Home Office; with all the files.  How can I fix the desk top to coinside with his status of being online.  Yet once, my counter top will not recognize the password, but the desk top shows online in the home group.

  Home Group is Windows 7.

  Here is the Vista Forums.

  What operating system do you use?

  Vista info below:

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• my computer has limited connectivity to my wireless network

  I have windows 7 Home Basic 64 bit. I have the network wireless in my house, but would not have access to the internet on my laptop. It connects to the network but still warn me that your computer has limited connectivity to my wireless network. Please help me!

  Hello

  1. have you made changes on the computer before this problem?
  2. you receive an error message or error code?
  3. What is the number of brand and model of your computer?

  4. who is the ISP?

  Method 1:

  See wireless and wired network connection problems in Windows:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  Method 2: You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

   

  Uninstall and reinstall the network adapter driver.

  Step 1: uninstall the network adapter driver.

  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  c. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. find the network device based on the option of the network card, right-click on it and select uninstall.
  d. restart the computer.

  Step 2: Download the latest network card driver on the manufacturer's Web site and install it on your computer.

  Hope the above information is helpful.

• The user profile service has no connection could not load profile __User

  I use Windows 7 ultimate, I can't log on to the computer that shows me that "the user profile service has no connection. Unable to load the user profile.

  So how do I do?

  This error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up the accounts of users at the end of this post.

  2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Windows 7. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

  3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have an installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can make a bootable DVD of Windows 7 repair of the file on this link:

  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system, you need third-party burning like Nero, Roxio or free ImgBurn software to burn the .iso image image file, not in the form of data. Windows 7 can burn the .isos natively.

  Now, remove the rescue DVD you made, restart windows system and log into the built-in Administrator account, you enabled.

  4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.

  5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  Make the necessary changes, close Regedit and try to connect as this user.

  6. If that doesn't solve your profile, it is corrupt. When you do that, you should make a new Standard user account and copy your data to it. Do not delete the old account until you have recovered data you need!

  Once everything works, go to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Windows 7

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it can be more work you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• Passport BBM - BBM has lost connection. Error

  Just got a new passport BB yesterday and followed the installation procedure.  After that I get the main phone, I tried to access BBM. Initially, he showed a screen with stickers and a few links ToS and EULA. Once hit accepted, he deleted and after a few minutes, shows the error message: "BBM has lost connection. Can not connect to the server.

  It is on OS 10.3. 0 675

  and BBM version 10.4.4.8 (everything has been updated during installation)

  The only thing that I could find on the database has information about a building of BONES cast in 10.2

  Hi @fj_langlais

  Can you check to see if you get the same error when you check the software updates?

  Using a new BBID or one that has been linked previously to another device?

  Do you know if you are connected to the BlackBerry Internet Service? You should see the BlackBerry Logo next to your signal at the top of your home screen indicator.

  Can you try to send a PIN message?

  1. open the Hub and select "Message of PIN.

  2. Select "dial."

  3. Enter your PIN in the field "to".

  4. press on "send".

  Note: To find your PIN go to settings > topic > category > hardware

  If the fails to send a PIN message recording unit to try to give, the following BlackBerry Knowledge Base Article explains how - KB00510: how to register a BlackBerry smartphone with wireless network

  Once you have done that try yourself send a PIN message a second time, and see if its sent successfully.

  Let me know how it goes!