7210us dv6 want question replacing windows 8

Similar Questions

• notebook dv6 restored envy and windows 8 not be loading not I don't have disks

  I bought a laptop HP dv6 want used with Windows 8.  The person I bought was not to remove his password or fingerprint scan, I have been unable to reach (I bought out of State).  I did some research and found the best thing to do was restore complete system - which i followed the instructions and made.  I don't have the original driver disc.

  I am now in a loop of contant, where he arrives with the first password which successfully, I have changed but want to remove.  When it starts to load the administrator that is in a constant loop of Windows didn't load correctly. Restart the computer.  And I fo around and around, I tried everything I found here and many other bulls and still I am unable to make it work.

  I have a Windows 7 disc, but I'm afraid to even try because I was told that resetting to the factory settings would work and it doesn't I don't want to do more damage.

  I noticed that the date was born 00/00/0000 say I'm not sure if it of part of the problem or not

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  Please contact official HP support in your country / region, via the Portal Support HP's worldwide, to see if the HP recovery support is available for the computer. Software may not be covered by warranty, and there may be fees for the HP recovery media.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• How to get the do you want to replace these files"dialog box appears in windows 7 (as on xp when cut/copy/paste files)

  I was wondering if there was a way to get windows 7 to look like windows xp then copy and paste files. I don't see the pop-up box asking you 'do you want to replace these files' on 7, I want to see this box and know that 7 will overwrite and copy everything.
  The details of this are, I have a folder with a lot of stuff in there on my desktop windows xp, when I try to copy and paste it on my windows 7 is not to copy and paste all the stuff. I have plenty of hard drive and don't ever see an error message. So why I wonder if the same 7 will overwrite some files. Help, please!

  Hello

  If I understand the question, you want how copy and paste the function works in Windows 7. Please let me know if this is not correct.
  You have reached the right forum for your question. We are here to help solve your problem and guide you in the right direction.
  I suggest you to see the links and check if it helps.
  Work with files and folders
  http://Windows.Microsoft.com/en-us/Windows7/working-with-files-and-folders
  Copy and paste a file
  http://Windows.Microsoft.com/en-us/Windows7/copy-and-paste-a-file
  Select multiple files or folders
  http://Windows.Microsoft.com/en-us/Windows7/select-multiple-files-or-folders
  Hope this information helps you. If you need help or information, please reply to this message. I'll be happy to help you.

• Computer laptop PC - HD replaced - Windows reinstall question

  Hello.

  Recently, I needed to replace my old HD with new ones. The PC came with Windows Vista Ultimate 64 but I had upgraded to Windows 7

  Ultimate 64 with Service Pak 1. Now, I try again to upgrade Vista to 7 Ultimate but I get an error message

  fill four of the five stages: "Windows Setup cannot configure Windows to run on a hardware on this computer.

  What should I do?

  Thank you!

  PLUG-

  (Laptop) Dell Precision M6400

  New installed hard drives, reinstalled OS 4/14.

  Windows Vista Ultimate Edition

  Processor - Intel Core (TM) 2 Extreme CPU Q9300 @ 2.53 GHz
  RAM - 12.00 GB
  System - operating system 64-bit

  NVIDIA Quadro Fx 3700M

  2 - 500 GHz HD is implemented in Raid 1 (mirror)

  Machine running Windows Vista Edition full with Service Pak 2.

  CrystalDisk screenshots attached HD info.

  ~S.~

  

  

  Try to reduce the amount of RAM installed on a unique key.

  Disconnect all non-essential devices you have attached to the system.

  Try the following

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Press SHIFT + F10 from your keyboard

  type the following commands

  DISKPART

  Press enter

  the list volume

  Next, you select the volume where you want to install Windows 7

  Type: select disk #.

  # represents the number of the volume

  Type: clean

  convert mbr

  create the primary partition

  assets

  format fs = ntfs quick

  output

  output

  Try to make a custom with the Windows 7 DVD installation:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• want to replace the faulty wireless card in dv6

  Hello

  I want to replace the card wireless in my HP Pavilion dv6 Notebook (product LK384PA #ABG number).

  I read somewhere (in a lot of places actually) that the BIOS will almost certainly turn off the map (may even refuse to system startup).

  My current faulty card is Intel Centrino Wireless - N 1000 (model 112BNHMW).

  Issues related to the:

  If I buy the same model of card off ebay - the bios will allow it? Or the card should be "tattooed HP?

  If I can't find a map tattooed HP on ebay - I'll be able to use a USB wireless card?

  TIA

  Hello:

  Here is the link to the service manual for your laptop.

  Cards supported with the corresponding reference numbers are in Chapter 3 begins on page 19.

  What you said is correct. You only NEED to install one of the maps in the maintenance manual and it MUST have this part number HP on it or it won't work at all.

  Laptop you don't POST until the unsupported card is removed.

  Make your request eBay only by the number of the desired part. Do not interview the model of the card.

  You can also get most of the HP maps (of course that you will probably pay more) on the site below.

  Enter the part number you want to buy. If this is not available, you can call HP and give them your model number and the wireless card you want and see if you can get it that way.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=A3443EA1154544F59545214567C9763E

  Or you can use the PartsSurfer from HP:

  http://PartSurfer.HP.com/search.aspx

  Yes, you can use a wireless USB adapter, but I recommend that go into your BIOS and disable the onboard or remove physically, if you never want to use again.

  Paul

• Satellite L350-16U - I want to replace the Vista to Win XP

  I want to replace my operating system (windows vista) on my PC (Satellite L350-16U) by windows XP. Is this possible? Is how hard it?

  What s the verification of the list to succeed in this business?

  Just a question:
  Search you and read a few threads here before you posted this question?

  The forum is a large database and this theme has been addressed several times here!

• How to replace Windows 8 with Windows 7 on a Compaq CQ58

  Hello!

  Yesterday, I bought a Compaq CQ58 with Windows 8 on it. I would buy Windows 7 to replace Windows 8 with. But:

  1. it is posible to change 06:52 on my laptop CQ58?

  2 and if so, can I have programs default HP on this subject?

  3 and if so, how?

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  1. it is posible to change 06:52 on my laptop CQ58? YES, it is probably possible to install Windows 7 on your computer.

  2 and if so, can I have programs default HP on this subject? NO.

  3 and if so, how?

  WARNING *.

  HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '. This should clear up the CD/DVD device is missing.

  

  In addition, as the hard drive is probably partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  From the top...

  (1) turn on the computer and immediately start typing the key "ESC".

  (2) when the MENU is displayed, press "F10".

  3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

  4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

  5) press "F10" and click "YES" to "Exit Saving Changes".

  (6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

  (7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

  (8) to turn on the computer and immediately start typing the key "ESC".

  (9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

  (10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".

  11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

  (12) you may need to provide Intel or AMD SATA/RAID drivers at the moment...

  (13) ' where do you want to install Windows 7? Select "Disk / Partition" with "Unallocated space", you created earlier, and then click "next".

  (14) follow all instructions and meet the need. Enter the Windows 7 key when asked.

  (15) download and install the drivers from the support page for your computer.

  After installing the drivers, please post the "Hardware ID" Device Manager (text only) for all other devices missing or unknown as illustrated in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Is it possible to get a disk/key replacement windows 7 so I can reinstall Windows?

  I need help on that question, there pre installed, but it's on a defective drive, I have a replacement hard drive, but I succumbed to any backup or attempts at cloning/duplicating I though a Windows disk trial version, is there a way to get a disk/key replacement windows 7 so I can reinstall Windows? However, I have the product ID. It is an OEM.

  If it is preinstalled, there should be a sticker COST of Windows 7 with product key.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• Pavilion dv6 stuck on starting windows screen

  Pavilion dv6 stuck on starting windows screen.

  Memory test: past

  Smart check: past

  DST short: FAILURE

  FAILURE ID: 60FTV0-5KS6SG-MFH14J-60UH03

  PRODUCT ID: LF1374AV

  Hard drive 1

  Help, please. I bought a new internal hard drive. But I have no recovery disks.

  Thank you

  XPJ

  Hello

  There are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option, if you came to laptop with Windows 7, you might consider is to create your own installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( must be the same version - i.e. Home Premium.) Professional etc. - initially supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is Digital River.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are from here.

  Best regards

  DP - K

• Satellite A200-PSAE6E: I want to use Windows 7 - what drivers should I use?

  I have a Toshiba Satellite A200 PSAE6E, and now I want to use Windows 7.
  Only, I have a question, if the drivers are supported and what BIOS I need to use

  Hello

  Windows 7 is not official on the market. Only the RC (Beta) version is available.
  This means that there is no driver specific to the Win 7 OS.

  But as you know the Vista is very similar to Win 7 and it is why some drivers (not all) should work and work with Win 7.

  Just test and check what can be used and what doesn t work with Win 7

  Maybe you could post some summary finall...

• I want to install Windows XP on Satellite A200 - 1 M 4

  I want to install windows xp A200 1 M 4...
  What do I do?

  Please answer my question.

  Hi hilalay

  In this forum, you will find hundreds of similar questions / answers
  I put t know what you want to know exactly, but the point is that your laptop A200 - 1 M 4 seems to belong to the series of PSAE0E.

  Choose this slot serial number form download if you need XP compatible drivers.

  The XP installation is not difficult. You must include the SATA driver in the XP CD. This is necessary in order to make the visible HARD drive and reinstall XP.

  [Check this way to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  Finally, install all drivers Toshiba XP available and enjoy.

  By the way; the update of the BIOS XP would be desirable also because without BIOS XO some FN buttons will not work correctly.

• Satellite P200 - 17 c - I want to install Windows 7 64 bit

  Hello

  I use Toshiba P200 - 17 c (PSPB6E) and were broadcast on the public beta of Windows 7 32 bit because it had been released a few months earlier, but I am surely informed Windows 7 64 bit is the way to go, so I would like to give it a try when the RC was released on 5 May. I have some questions I want to answer it please:

  1. the "spec" for my laptop indicates that it supports the Intel 64-bit architecture, but that the BIOS must also support 64-bit. Can someone tell me if my P200 will support and run Windows 7 RC 64 bit?

  2. my current BIOS version is v2.50 for 32-bit and the download page was also a v2.50 for 64 bit, does that mean if I want to use Windows 7 RC 64 bit, I need to Flash my BIOS using thev2.50 BIOS 64-bit?

  3. If the answer to Q2 is Yes and I flashed my BIOS using the d/l 64-bit, do I need to re - flash BIOS 32 bit if I want to go back to using any 32 bit OS?

  4. If the answer to Q3 is Yes, then I would have thought that Toshiba would have created a BIOS that would support 32-bit and 64-bit at the same time.

  Regrads

  Dave

  > As mentioned above, I am using Windows 7 32 bit and if I had to install Windows 7 RC 64 bit, would I need to update my BIOS with BIOS of 64-bit while I use a 32 bit OS and then install the 64 bit OS, or I install the OS 64-bit with my current 32-bit BIOS and then update once the 64 bit OS is installed?
  > (My personal feelings are that I had to upgrade from 32-bit to 64-bit BIOS while I use Windows 7 32 bits and then immediately to install Windows 7 64 bit)?

  If you want to update the BIOS, then you must first switch to the OS preinstalled Toshiba!
  I doubt that the BIOS update has been tested with Windows 7 at the moment and in my opinion, there is a high risk that something went wrong during the BIOS update process!

• Satellite P10 554: I want to replace my carpet ODD-Drive * a UJ-811

  Hello everyone,

  I want to replace my carpet ODD-Drive * a UJ-811. My question: is this master drive or balm or cabelselect und is compatible with the Slim NEC AD - 7540A?
  Thanks for the reply

  Hello

  It's not easy to say because this setting depends on the installed firmware.
  I can only suggest on this settings and I think that it s a C - SALT.

  Before buying readers devices, you should be sure that this device is supported.
  In this way the Toshiba service partner could provide good info.

• Computer HP laptop 655, want to install Window 7 Ultimate 32 Bit, Windows 8 should be deleted.

  Message, "boot image selected is not authentic > press to continue:"then the computer shuts down. " I believe that it is a HP Set Up issue, no question of recovery Win8. Please notify. I don't want recovery of Windows 8, but you want to install the new copy of my own Windows 7 Ultimte 32-bit operating system.

  Secure boot disable and enable the legacy boot in the BIOS mode and then perform a clean installation, see here:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

• HP ENVY dv6 Notebook PC replacement fan part number of

  I need to know what part to buy to replace the fan. I get hp fan 90 b error message that says that my fan is not working properly. A month ago, it started making loud noises. It still works, but I want a replacement nearby is not installed until the thing decided to die for good.

  HP ENVY dv6 Notebook PC

  Series No.: [edited by Moderator serial number]
  Product #: B6C70AV

  Thank you!

  Hello:

  Because your model is a CTO model it does not give material specifications.

  You need one of the two fan-heatsink for Intel based motherboards, found in Chapter 3 on page 29 of the owner's manual.

  http://h10032.www1.HP.com/CTG/manual/c03591281.PDF

  However, it is very easy to understand than you need...

  If your laptop computer is the AMD / switchable graphics of Intel you need of this fan/heater:

  For use only on the computer models equipped with an Intel processor and a graphics subsystem with discrete memory

  HP Part # 682061-001

  If your laptop has Intel HD graphics card, you need the fan/radiator:

  To be used on the computer models equipped with an Intel processor and a graphics subsystem with UMA memory

  HP Part # 682060-001