750 - 177c envy: connection of monitors

Similar Questions

• 750 - 177C envy: addition of Samsung SSD for envy 750-177C

  I just bought a HP Envy 750-177c. I have it operational and it works very well. I had installed a Samsung 850 EVO SSD in my old computer and now want to add to it. I have an external cloning device that I can plug it into the computer and launch the software from Samsung to clone the HD HP. Once this is done, I will be able to add the SSD to the drive Bay and make the boot drive. I did all these steps with my old computer, so I think that it will be substantially the same with the RESUME. I wonder if there is any change in the BIOS, that I should do to get the best performance from the drive. I also heard AHCI. Is selectable via the BIOS with Windows 10, or do I have to make some changes by Reg Edit? I need to download a driver AHCI? Is this useful?

  Thanks for the tips.

  Robb

  Hi @RobbL!

  When it comes to SSD, I suggest you to activate the AHCI because it often improves performance when it comes to SSDS (and not only - if you are running an SSD and a HARD disk HARD drive will get some push), and it offers a few additional features like connection hot records.

  You can activate it by following these steps:

  * Let the connected existing boot drive.
  * Go to MSCONFIG and set the PC to boot in safe mode.
  * Power cycle your PC all the way to the top in safe mode then power down in safe mode.
  * Turn on and boot into the BIOS and enable the AHCI and disable secure boot. Save the changes.
  * Restart your PC. If OK at this stage then return to MSCONFIG and uncheck start safe mode and save the changes.
  * Turn on your PC and if OK then power off.
  * Connect the new SSD and power upward.
  * Use the cloning software to clone the old disk on the new SSD.
  * Switch off the PC. Disconnect the old drive and plug the new SSD in this SATA port.
  * Lights up and you should be good to go.

  Regarding the drivers, you can take a look at this article from HP on the SSD:

  http://support.HP.com/us-en/document/c02435719

  Hope this helps, and feel free to ask any questions you may have.

  See you soon!

• 750 - 177c envy: addition of SSD for computer

  I would like to replace the hard drive with a solid state drive.  Is it possible on this system?

  I upgraded my pc want with an SSD. Literally any computer HP desktop can support it as they all seem to have at least a spare SATA connector and at least a free drive Bay. (in my experience)

• HP ENVY 750-177c: I have a HP ENVY 750-177c and has been upgraded and 2 thin black wires were disconnected.

  I have a HP ENVY 750-177c and has been upgraded and 2 thin black wires were disconnected from the motherboard.  They have loops at the end of the wires that look like they might slip on the pins.  The wires connect to the upper part of the box of the computer.  Where to reconnect?

  Find this card in your system. It is the M2 half-bridge Wireless card.  The other end of the wires must always be fixed.  There are 2 heels left and right of the '2 '.  If everything is correct, it is your physical WI - FI antenna. Just re - stick inside the case.  The small clips are used for an external aerial connection.

  

  PS<> have a good day...

• Connect two monitors to my laptop HP

  I have a laptop dv7 HP Envy.

  Windows 8.1

  Inter Core i 7-3630QM [email protected] GHz

  16 GB of Ram

  64 bit

  1 TB HD

  Intel HD Graphics

  NVIDIA GeForce GT 635 m

  2 monitors:

  HP w2207h W? : 1 - HDMI. 1 VGA & 1-USBin.

  2 - Out USB

  Monitor 27 '' LCD HNC

  HDMI 1

  HDMI 2

  VGA

  I would like to connect two monitors to this laptop. The laptop has: 1-HDMI; 1 VGA.

  This seems to be a slam dunk, it's not. They put the VGA and HDMI so close together that I can't connect both at the same time. It's as if they force the VGA or HDMI. I am a general contractor and need two monitors if possible. I look at work photos on an all in utiizing a drawing program to produce plans of work on another.  There are 1/4 "between the VGA and HDMI imput plugs I would have been Golden, but they did not. Can anyone suggest a way to get these two monitors plugged and upward and running.

  Thank you

  Perrys6

  Ahhhhhh.  Hey all what works.  I had not thought that.

• I have the HP envy window8 and monitor AOC 22 "Led. I can't get all the colors to be displayed.

  Original title: color monitor

  I have the HP envy window8 and monitor AOC 22 "Led.  I can't get all the colors on the screen. The colors are bright that I receive, but can't get the yellow, green, purple. etc. I followed in the Help menu for calibration of the colors without success by the buttons on the monitor in windows.

  Hi Ellen,.

  (a) you use HP ENVY laptop or desktop computer?

  (b) what is the model number for HP ENVY and monitor AOC?

  (c) what kind of connector do you use to connect the monitor?

  (d) have you tried to use the other cable and check if works?

  You may experience this problem if the connections between your computer and your monitor is loose or if the drivers of graphics cards is corrupted. Try these methods and check if that helps:

  Method 1: I suggest you to update the latest drivers for the graphics card for Windows 8 and check if it helps:

  http://WWW8.HP.com/in/en/support-search.HTML?tab=1#/qryterm=HP%20envy&SearchType=s-002

  Method 2: Visit the COA Web site and install the latest drivers by selecting the drivers of the AOC monitor for your model and see if it helps:

  http://www.aocindia.com/service_manual_monitor.php

  See the documentation for your monitor and see if you can find the menu to restore default settings. If the problem persists I suggest you to contact the manufacturer (AOC) for assistance.

  Also refer to this article: get the best display on your monitor

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Hope this helps, if you need help on Windows let us know we will be happy to help you.

• connect two monitors

  I have a 2009 mac with a video card that has a mini port and and Dual port and I want to connect two monitors, how can I do that, I have a monitor with a mini port that is already connected, how do I get a different view to fit with this video card? I can't find adapters to get there because the Dual mini adapters, the mini is male. and a male connection will not work.

  Hi, I'm a bit confused, the two video ports are 'Mini', one is Mini Display Port, the other MiniDVI...

  Apple Mini DisplayPort to DVI dual link

  Part: MB571Z WW (except China, Taiwan and Korea); MB571FE (in China, Taiwan and Korea)

  Use: Use the Mini DisplayPort to Dual-Link DVI to connect your Mac to a 30 inch display that includes a DVI connector, such as the 30-inch Apple Cinema HD display.

  Compatible with:

  • MacBook Pro (retina, 13-inch, late 2012) and later versions
  • MacBook Pro (retina, 15-inch, early 2013) and later versions
  • MacBook Pro (retina, mid-2012)
  • MacBook Pro (13-inch, mid 2009) and later
  • MacBook Pro (15-inch, Late 2008) and later
  • MacBook Pro (17 inch, early 2009) and later
  • MacBook (13 inch, late 2009) and later
  • MacBook (13-inch, aluminum, late 2008)
  • MacBook Air (late 2008) and later
  • Mini Mac (early 2009) and later
  • iMac (20 inch, early 2009) and later
  • iMac (24 inch, early 2009) and later
  • Mac Pro (early 2009) and later

  

  Apple Mini DisplayPort to DVI (Single Link)

  Part: MB570Z WW (except China, Taiwan, Korea); MB570FE (in China, Taiwan and Korea) use: use the adapter Mini DisplayPort to DVI to connect a digital monitor advanced, such as the Apple Cinema Display 20 or 23 inches, which includes a DVI connector.

  Compatible with:

  • MacBook Pro (retina, 13-inch, late 2012) and later versions
  • MacBook Pro (retina, 15-inch, early 2013) and later versions
  • MacBook Pro (retina, mid-2012)
  • MacBook Pro (13-inch, mid 2009) and later
  • MacBook Pro (15-inch, Late 2008) and later
  • MacBook Pro (17 inch, early 2009) and later
  • MacBook (13 inch, late 2009) and later
  • MacBook (13-inch, aluminum, late 2008)
  • MacBook Air (late 2008) and later
  • Mini Mac (early 2009) and later
  • iMac (20 inch, early 2009) and later
  • iMac (24 inch, early 2009) and later
  • Mac Pro (early 2009) and later

  

  Apple Mini DisplayPort to VGA

  Part: MB572Z WW (except China, Taiwan, Korea); MB572FE (in China, Taiwan and Korea) use: use the adapter Mini DisplayPort to VGA to connect your Mac to a standard analog monitor, projector or a LCD display that uses a VGA connector or cable.

  Compatible with:

  • MacBook Pro (retina, 13-inch, late 2012) and later versions
  • MacBook Pro (retina, 15-inch, early 2013) and later versions
  • MacBook Pro (retina, mid-2012)
  • MacBook Pro (13-inch, mid 2009) and later
  • MacBook Pro (15-inch, Late 2008) and later
  • MacBook Pro (17 inch, early 2009) and later
  • MacBook (13 inch, late 2009) and later
  • MacBook (13-inch, aluminum, late 2008)
  • MacBook Air (late 2008) and later
  • Mini Mac (early 2009) and later
  • iMac (20 inch, early 2009) and later
  • iMac (24 inch, early 2009) and later
  • Mac Pro (early 2009) and later

  

  Apple Mini-DVI to S-video/Composite adapter

  Part: M9319GCompatible with:

  • MacBook (13 inch, late 2008)
  • (13 inch, early 2008) MacBook
  • MacBook (13 inch, late 2007)
  • MacBook (13-inch, mid 2007)
  • MacBook (13 inch, late 2006)
  • MacBook (13-inch)
  • iMac (early 2008)
  • iMac (mid 2007)
  • iMac (late 2006)
  • iMac (early 2006)

  

  Apple Mini-DVI to DVI

  Part: M9321GCompatible with:

  • MacBook (13-inch, mid 2009)
  • MacBook (13 inch, early 2009)
  • MacBook (13 inch, late 2008)
  • (13 inch, early 2008) MacBook
  • MacBook (13 inch, late 2007)
  • MacBook (13-inch, mid 2007)
  • MacBook (13 inch, late 2006)
  • MacBook (13-inch)
  • Mac mini (late 2009)
  • Mini Mac (early 2009)
  • iMac (early 2008)
  • iMac (mid 2007)
  • iMac (late 2006)
  • iMac (early 2006)

  

  Apple Mini-DVI to VGA

  Part: M9320GCompatible with:

  • MacBook (13-inch, mid 2009)
  • MacBook (13 inch, early 2009)
  • MacBook (13 inch, late 2008)
  • (13 inch, early 2008) MacBook
  • MacBook (13 inch, late 2007)
  • MacBook (13-inch, mid 2007)
  • MacBook (13 inch, late 2006)
  • MacBook (13-inch)
  • iMac (early 2008)
  • iMac (early 2006)
  • iMac (late 2006)
  • iMac (mid 2007)
  • Mac mini (late 2009)
  • Mini Mac (early 2009)

• can Apple Watch connect with monitor polar heart

  can Apple Watch connect with monitor polar heart?

  Hello

  If you are referring to the H7 polar, then Yes, we can.

  Firstly turn off pairing the monitor from other devices which he may previously have paired with (for example your iPhone), then:

  • Wear the polar H7 (which lights up by being broken to the strap and rotates when detached).
  • On Apple Watch, go to settings > Bluetooth.
  • Wait that Polar H7 appears, then press it.

• Connect a monitor 2nd or 3rd in 21 "iMac mid-2014

  Hello

  I work from home with sheets of Excel spreadsheets and Word documents.

  1. How can I connect a monitor 2nd or 3rd in 21 "iMac mid-2014?

  2. who monitors are not suitable?

  Thank you.

  iMac (21.5 inch, mid-2014), OS X El Capitan (10.11.4), 1.4 GHz Intel Core i5, 8 GB 1600 MHz DDR3.

  (1) use connections Thunderbolt or mini-DisplayPort. If necessary a mini-DisplayPort to HDMI or mini-DisplayPort to DVI adapter can be used.

  (2) according to the everymac each thunderbolt connection supports up to a 2560 x 1600 screen. Bonus points for a monitor with wide-angle IPS display technology and one case of white/silver to aesthetically match the iMac. Be aware that the iMac screen starts a few inches higher than the norm, so if you want your poster to the line up horizontally you'll be requires a monitor with a lot of height adjustment or a willingness to place the monitor on top a raiser, books or other items.

• How to connect 2 monitors to macbook pro late 2012

  Hello, I want to connect 2 monitors to my end 2012 pro macbook and use monitors instead of the laptop.

  It's quite possible,

  To do this, you need the following:

  -2 external monitors

  -a thunderbolt adapter that can:

  -convert thunderbolt to any video input located on your external monitor of choice.

  -a way of Garland or split your thunderbolt 1 port to connect to 2 monitors

  https://www.YouTube.com/watch?v=sP1thwUcO9c

  You can then use the closing clamshell mode to operate only on your external monitors

  https://support.Apple.com/en-us/HT201834

  If you have any questions let me know.

  see you soon

• I have a macbook pro mid 2012 and I want to connect two monitors

  I have a macbook mid 2012 pro and I want to connect two monitors.

  as you know, I have a firewire port, port a thunderbolt and two usb ports.

  You can connect in series two screens Thunderbolt to your MacBook Pro.

• HP Pavilion 020na-300 Mini PC: connect two monitors for HP Pavilion 020na-300 Mini PC

  What are the options to connect two monitors for HP Pavilion 020na-300 Mini PC?

  1. do I need 2 x HDMI monitors? A DP HDMI monitor to use with different socket or adapter as well?

  2. How can I connect the 2nd to the 300-020na Mini PC HP Pavilion?

  RSFSS, welcome to the forum.

  Here's a guide that should help you with your problem.

  RSFSS wrote:
  

  What are the options to connect two monitors for HP Pavilion 020na-300 Mini PC?

  1. do I need 2 x HDMI monitors? A DP HDMI monitor to use with different socket or adapter as well?  If you do not already have the monitors, I definitel would get both of them with HDMI connectors.  You will need a DP to HDMI connector:

  http://www.Amazon.com/GP/product/B004C9QST2?gclid=CJDQqtv1rsoCFZBcfgodha4DDQ

  2. How can I connect the 2nd to the 300-020na Mini PC HP Pavilion?  The Guide I've provided assistance with this procedure.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Satellite L850 - is possible to connect two monitors external simultaneosly

  Hi, I have a L850-150 and I would like to know if it is possible to connect two monitors external simultaneosly, one by Hdmi and the second by Vga to enjoy an installation of three active screens (including the laptop screen). Im trying to figure out how to do without using a USB to adapter vfga or a Matrox dualhead2go.

  I want to use the outputs existing.
  Thanks in advance

  Some laptops supports a dual output: for example the Qosmio X 500 as shown here:
  http://APS2.toshiba-tro.de/KB0/TSB13033Y0000R01.htm

  But for Satellite L850 this isn t possible.
  But you can use an external device, such as Dynadock
  http://www.Toshiba.com/us/ACC-dynadock

• Tecra M5: Is it possible to connect two monitors?

  Hello

  Is it possible to connect two monitors the Tecra M5? Is it possible through the port replicator, perhaps by a split of dvi output or a dvi, one on the vga monitor. I want to divide between the two monitors.

  At soon now
  Iain.

  Hello

  No, it's not possible to connect two external monitors.
  If you want to split the screen, you can use the extended desktop option.
  In display properties, you will find the option to extend my desktop on this monitor. You must select the second monitor and activate this option.

• How can I connect another monitor to compaq SG3 because there is only 1 VGA port and no HDMI.

  How can I connect another monitor to compaq SG3 series because there is only 1 VGA port at the back and there is no HDMI port.  The operating system is Windows 7. I think to buy vga splitter, I don't know if that will allow me to move images/data between the monitors. Please tell us what to do. Thank you

  It is based on the expected results.  A VGA splitter will give you two monitors but they will display the same image.  If the expected result is two different pictures, maybe something like this will do;

  http://www.Amazon.com/IOGEAR-external-video-card-GUC2015V/DP/B000NJFJJK

  or

  http://www.Amazon.com/STARTech-com-external-video-monitor-adapter/DP/B005G306I2/ref=pd_cp_e_0

  Some will also do DVI: http://www.amazon.com/Plugable-Multiple-2048x1152-1920x1200-DisplayLink/dp/B0038P1TP4/ref=sr_1_1?s=electronics & ie = UTF8 & qid = 1345919878 & sr = 1-1 & keywords = usb + to + DVI