7500 a - printer - print USB or Ethernet connection

Just bought a 7500 today.  Currently connected through the USB port on a Windows 7 computer.  I also want to connect the Ethernet to my Wireless Linksys router and be able to print via USB or Ethernet connection.  Is this feasible?  Or, what I need to do USB and wireless.

Note that when you use the machine for the work I use a VPN tunnel to the corporate network, while I have to keep the USB cable to the Win 7 machine, internal I might close my VPN to print.  I want the second connection (Ethernet), so others on my LAN PC can be printed on the 7500 a.  My assumption is that each printers on the local network must have the drivers for 7500 installed... a is this correct?

Edit: On my LAN, I use static addresses.

Any input appreciated.  Thank you.

Yes, it will work.  After you install the printer on a Win 7 machine using the USB connection, I took the CD provided a Win - XP machine and installed the printer from the following options the XP machine as the prompts.  Note that I addressed the printer with a static IP address, via the display of the printer Panel, before installing on the XP machine.

Tags: HP Printers

Similar Questions

  • If my printer USB cable is connected, my computer won't start?

    If the printer is on and the USB port connected.  The computer won't start.  If I turn on the laptop with the USB plugged in and as it starts and then turn on the printer, everything works fine.  Almost ok.  I think I should be able to leave the printer on all the time as I do at work.  Then when I start the computer, the printer is ready.  Every other printer I've ever had worked this way.  Any suggestions?

    Maybe the printer looks like a hard drive (some printers have card readers that make them look like a disk) and the computer attempts to boot from the USB drive instead of the hard drive?  It would be a modification of the settings in the BIOS

    'Teething problems of a PC with a connected external USB drive.
      <>http://wdc.custhelp.com/app/answers/detail/A_ID/1201/~/problems-booting-a-PC-with-an-external-USB-drive-connected>

    Another article I found...  Not sure I can add much further than.

    "USB device does not initialize at startup or Windows XP no longer meets the start or stop"
      <>http://support.Microsoft.com/kb/830957 >

    HTH,
    JW

  • Can range of printers HP 6830 - I connect via USB and ethernet?

    I just bought a printer HP 6830.  I have a Windows Vista computer that I don't want to be connected to the internet and a PC of Windows 8.1, but also a laptop Windows 2000 who are both connected to the internet via ethernet (and can also be connected via a wireless connection).  I was hoping to connect the printer to the PC via the port USB Vista and for Windows 8.1 PC and laptop computer via an ethernet cable.  Can I connect via usb or ethernet connection at the same time?

    Hello

    You can install the software via a USB port on your Windows Vista PC, do not connect USB until the installation guide to make.

    So you can connect the printer to your network and install it on Windows 8.1 PC, USB and a network connection can be used for concurrency and would not interfere between them...

    For the PC under Windows 2000, the printer is not compatible with the operating system and there is no drivers for such a, you can find the system requirements below:

    http://support.HP.com/us-en/document/c04268294

    Kind regards

    Shlomi

  • C5280 ethernet connection

    I have a dlink router that has only Ethernet connection ports. I need a cable that goes from the c5280 all-in-one printer usb scanner rear port au port dlink. I can't seem to find one anywhere. Is there such a cable?

    Try Googling "Printer USB to Ethernet converter".

  • OfficeJet Pro 8500 - no USB or Ethernet cable to connect the printer to the computer?

    I'm just trying to set up my new printer Officejet Pro 8500 Wireless.  I got to the step of installing the software, but there seems to be no cable supplied to connect the printer to my computer.

    I can't currently connect via radio that I expect a new wireless router be delivered.  Is this the way onlt connection other than buying a separate USB or Ethernet cable?

    Help, please.

    Ethernet and USB cables are not usually provided with most of the printers that you need to choose a cable with a length of favourabel to you. You can go to a hardware/computer store and buy a USB A-to-B cable. I'll post a picture of the end of cable just to clear any confusion.

  • 6280 all-in-One printer - changing of USB to Ethernet - error - connection cannot find the printer

    I am trying to reinstall my C6280 all-in-One printer on the product - my original installation CD was for a USB connection, I will reinstall for an Ethernet connection for use on our wireless network. I have the HP manual - install the software of the product in Windows XP for a wired network connection (Ethernet) - but get the error message - unable to locate the printer.   I plugged in the ethernet cable to the ethernet port on the computer and the router (Airlink 101).  Any suggestions on what I might hurt?

    Hello

    You can use the following link to install the printer on a wired n/w.

    http://support.HP.com/us-en/document/c01708573

    Just to confirm... Make sure that you connect 'printer and router using the ethernet cable.

    To make sure that your printer is found during installation, after plugging the ethernet cable, make sure that your printer is get a valid IP address.

    Menu - Network settings - display settings - display wired summary.

  • HP Officejet 8500 printer A909b does not connect to ethernet wired network.

    This is my first time on a forum & I am hopeing for some successes my network with printer setting

    .

    I am networking two PC Win XP, SP3, running with a printer Officejet 8500 A909b via a Netgear router.

    Previously, I had the printer connected by USB to a PC as needed with no problems except having to change the USB between PC to print.

    I tried several times to uninstall and reinstall the printer software, disabled the firewall & Anti virus, reset the router, reset the printer network settings & them restarted everything with no success.

    I printed the network configuration page & tried to enter the address EWS (http://0.0.0.0) in the browser Web without success either.

    I found the lights on the printer on the ethernet port does not at all & tried four different ethernet cables all work elsewhere. I tried all four ports ethernet to the router also.

    Thanks in advance for any help I receive.

    Concerning

    Allan

    Hello

    As network lights are not flashing when the cable is connected and the PC works with the same cable, which seems to be a faulty network card defectueuse on printer, please contact HP and they should be able to help in this regard.

  • HP Laserjet M452dn: M452dn Ethernet connected but do not print

    Win10 Pro x 64.

    Printer connects / impressions via USB but not via a direct Ethernet connection or through router.  Connection to printer Ethernet is not but installation disc is located by HP print and Scan by IP addfress doctor. Doctor says software not installed then DLs and installs the software - but still does not print.  Uninstalled and did the all over again: ditto. If again, doctor without uninstalling it (still) says not installed software - although it said it was installed before I ran it again.

    Router/printer Ethernet connection is good (fire port on) and the IP displayed on the printer screen, so I guess that the connection of the cable Ethernet/is OK. Network/print sharing enabled residential group. Utility of Windows/HP ID troubleshooting any problems.

    Something else I could try.

    Thank you

    Monk

    Hello @Hmonk the printer has two ways to be connected but we really recommend use one at a time if you are going to perform a network first installation you want to make sure that you have an IP address from the printer connect the network cable to the printer room will get internet brand of course, on the port on the back of the printer when you have connected cable has a green and the orange light and then go to the menu reports on the printer and print a configuration report right on the 1st page under product settings, you will find IPV4 you must subsequently make the installation at this time where everything you want to make sure, is that the IP address of its different then 0.0.0.0 or 169.254.XXX.XXX since these combinations indicates that the printer its does not properly connect to the network

  • Install a (wired) ethernet connected the printer on a wireless network

    I just bought a laptop from HP dm4-1050ea with Win 7 operating system 64 bit & s5780uk PC HP Pavilion Slimline, with Win 7, 64-bit operating system. I have a HP2610 Photosmart printer that is currently connected to a Dell PC, Win XP SP3, via the USB port. I want two HP computers connect to the HP printer via a Netgear DGN2000 wireless router wirelessly. I understand that the HP printer needs to be connected to the router via ethernet, however, I don't know how to proceed with the installation. The installation CD supplied with the printer's 6, Win XP, and I don't know if I should be downloading drivers to the computer laptop dm4 and Pavilion PC or just one of the computers?

    Any help on the steps to take and the order to take would be most appreciated

    Best regards

    Rathbane1

    For step 4 you have not need must be connected to the printer. As long as the printer is already connected by cable to the router it will be accessible wirelessly on the two computers during the installation of the software.

  • HP settlement 8710, 8720, 8730, 8740: HP Officejet Pro 8720, 8710 unable to print/scan/setup or connect via ethernet and wireless

    Hello

    I'm unable to print/scan/setup.  I can't connect without wireless or ethernet, both wireless and ethernet connection are turn off... what should I do?

    Hello

    Try these:

    1. on the printer Panel, drag to the bottom of the drop-down list and select the Configuration icon.

    2. on the Configuration tab, select 'tools '.

    3. choose "Restore Factory Default.

    4. you will see a message appears asking if you are sure you want to restore the default settings.

    5. tap Yes. A message appears indicating that the default printer have been restored.

    6. press the home button () to return to the main screen.

    7 run the "Wireless Setup Wizard" from Control Panel if you need of a wireless connection.

  • then I get the installation software for printer lexmark 5650 has failed the windows logo test, then @usb or ethernet point during installation it won't end up as I run the usb cable

    When you install the software for lexmark printer 5650 to test the logo point to install windows, then @usb or ethernet I can't complete install because it will not recognize the usb cable

    Hi Spudly49.

    Thanks for posting. You are using an OS 32-bit or 64-bit?

    If you use a 32 bit OS, please download and run the driver located here. http://support.Lexmark.com/index?page=content&ProductCode=LEXMARK_X5650&ACTP=product&ID=DR2226&segment=support&UserLocale=en_US&locale=en

    If you are using a 64 bit OS, please download and run the driver located here. http://support.Lexmark.com/index?page=content&ProductCode=LEXMARK_X5650&ACTP=product&ID=DR3915&segment=support&UserLocale=en_US&locale=en

    I hope this helps! Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • HP Officejet 7000 Wide Format: HP Officejet 7000 Wide Format Printer - E809a - loss of connection through router

    We have a problem get sustained response of our HP Officejet 7000 Wide Format Printer - E809a which is connected to the network wireless ethernet to a router Netgear cable.  We tried stripping on the software driver & uninstall of the printer of the registry, and then re-setup from latest downloads from the HP site.  It works, especially if the device is set as the default printer, but the printer greys out less than an hour in the device registry and the default value automatically resets to another printer.  Does anyone know why this printer loses his connection?

    Hi @Harry64,

    I see by your post that continues to change the default printer. I'd love to help you.

    Disable the SMTP setting in print, to see drivers if this will help.

    Devices and printers, click with the right button on the printer and click on printer properties, click the Ports tab, select Configure the Port, clear the SMTP check box and the printer should display online.

    If the problem persists, please take a look at this document. Monofunctional and HP Printers Multifunction - "the printer is offline" Message appears on the computer and the printer does not print: Windows 7

    If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

  • DeskJet F380: F380 - solution centre message 'Cut' to print but scanner is connected and working.

    My Deskjet F380 worked well but now, I get an error message when you try to print. Scanner is connected and works fine. Solution Centre message appears "Deskjet F300 Series offline!". Convenience store simply said ' turn on the printer!

    Can someone help please! I can't understand that only printing is disabled!

    Hey @AncientPrinter,

    I see that you have some problems with printing from your PC to 10 Windows for Deskjet F380 all-in-one printer. I can help with that.

    Here's what we will do:

    1. If the printer is connected to your PC via a USB cable, remove it.
    2. In your search type in printers bar and open devices and printers.
    3. Right-click on your printer icon listed.
    4. Click on remove the instrument.
    5. Repeat for all other icons printer listed.
    6. If you have removed the USB cable and plug. If not, click Add a printer to add to the queue new print.

    At this point, you should be able to print. If you are unable to do so, the next thing to do would be to start printing and scanning doctor. You can find the Print and Scan Doctor by clicking on this link. It will be either allow you to print, it will provide you with a list of questions, he found. If it finds all he couldn't solve the problems then please let me know what those who are.

    Please let me know if this allows you to print or if you have any other questions. If not, have a great day!

    If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

    If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

  • Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

    A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

    A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

    Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

    Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

    Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

    How connect to this printer?

    Try using the path UNC path of the printer in the Add Printer Wizard.

    Add a printer > network printer > connection to this printer ((deuxieme point)

    Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

  • My printer driver does not connect to my new laptop

    Original title: too old printer?

    My printer driver does not connect to my new laptop it says my hp7150 is a usb device that is older and may not work with usb 3 try usb 2?

    Hello

    You should be able to operate...

    Did you install the software for your printer, or just plug in?

    You can actually have more luck with the USB 2.

    I think your laptop would have at least a USB 2 port. Glance to one that is not blue...

Maybe you are looking for

  • How to hide the menu item 'bookmarks '?

    Firefox 5.0.1At the menu bar: 'File', 'Edit', 'View', 'History', "Bookmarks", etc.How to hide the element of "bookmarks"?I have the add-on PLAINOLDFAVORITES installed andI forgot how with v3.6.18. Thank you very much

  • Scatter chart: get the value of the label XYcursor

    Measurement Studio Visual Studio Professional 2012 2013 using,. On a scatter chart, it is possible to get the value of the actual label for a xycursor? For example, my label displays a date-time on the X axis format, it looks like: [04: 35:49; 0,2710

  • USB card reader

    I use HP Compaq dc7800 compact format, hp s/n: 2UA8491BGS p/n: AQ532US #ABA and Windows 7 Home Premium x 86 SP1, where can I find the USB card reader? http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdHome/?javax.portlet.begCache

  • Imminent hard drive failure

    Hi all I get this error disk hard Imminent failure.When I check the disc via the BIOS, I get this code: 90FB7V-1R27AK-MFKSWK - 60A 803 I have just need to know if the hard drive can be saved by - for example - a (formatting) or if the hard disk is be

  • HP Touchpad, Palm PRE account and German credit card

    I have problem with to enter my credit card information in the HP Touchpad. I had Palm Pre purchased in Germany and I inserted there the German credit card and scheduling of applications worked well. Today I got the new HP Touchpad also bought in Ger