7925 problems of compatibility of end of sale and 8821 phone wireless

Similar Questions

• I have a problem of compatibility with microsoft works 8 and windows 7 can anyone help?

  My computer came with a trial version of office 2010, it expired and I deleted it from my computer, I installed microsoft works 8, but now my printer print only half a page to a new document.  He still print other documents of my old records fine, but nothing as office 2010 has been removed, even if it printed fine work before delete office 2010.  It is not the printer it's an incompatibility problem.  I don't know if I can do some work 8 compatible with windows 7, but all said it should be compatible with it.  Help?

  Hi, Sissy,

  Start > type Services.msc

  Press enter

  Scroll down to print spooler

  Right-click on print spooler and select stop

  Wait for Windows to stop the spooler

  Close the window

  Press the Windows flag key + R to open the run

  Type Devmgmt.msc

  Press Ok

  Click on the + sign next to the Ieee... compatible printer

  Right-click on the driver and select uninstall

  Click on the + sign next to the imaging device

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the driver and select uninstall

  Restart your computer.  Windows will reload the printer drivers drivers update from the manufacturer's website.

  Start > type Services.msc

  Press enter

  Scroll down to print spooler

  Right-click on print spooler and select start

  Wait for Windows to start the spooler

  Close the window

  Try printing again

• Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.

  Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.   Any ideas?  It is my wife's favorite.

  Hello giant,

  It is not possible to use 16-bit on a 64-bit computer applications/games.

  However, you can download and install Wondows XP Mode for windows 7. Later, you can install your 16-bit application in XP mode.

  You can download the application from the link given:
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  After back and let us know if it helped to solve your problem.
   
  Thank you and best regards,
  R uma - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My new copy of Quickbooks Pro 2012 seems to have a problem of compatibility with Explorer 9

  My new copy of Quickbooks Pro 2012 seems to have a problem of compatibility with Explorer 9.  If anyone has experienced this problem and do you know a solution?

  Hello
   
  What is the full error message?
  The average while you can also contact QuickBooks for additional help.
  Here is the link: http://community.intuit.com/quickbooks

• My photoshop is flashing, there are problems of compatibility with the graphics card. Help?

  My photoshop is flashing, there are problems of compatibility with the graphics card. I tried to turn off the graphics card option in photoshop, uninstalled and installed several times, but still. Please, what should I do?

  I have an Intel (R) Graphics 5500 HD and Nvidia GeForce 820 M.

  I disabled the Nvidia because it seems to me that Photoshop is not supported.

  Hey Mohit and other colleagues!

  See how I solved this problem (temporarily): workaround Photoshop for screen flashing - YouTube

  I hope that helps for a while this problem.

  Best regards.

• [URGENT] Problems of compatibility in Flash Professional CS6

  Hello

  I can't add a clickable URL in my Flash banner advertising. It is created in old Flash Player 9 and ActionScript 1.0 and is having so many problems of compatibility throughout the project. I saw a lot of videos, but I still do something wrong, is there anyone any direction can point to where all the latest flash tutorials are to learn the basics. I just read the "creation of first FLA" file - it's been a dozen years that I used Flash and I'm not worried about it, file is created and all - in general I just change little things like the URL and text and images, perhaps in the future a little more animation but as now I just need this URL thing sorted. I see the getURL function is no longer available and navigateToURL is a job, but still, I'm having some trouble. Let me know if you guys can point me in any direction to learn the basics of it where I can understand it on my own or if someone can help me. Willing to share the FLA file if they want to study or anything at all.

  Thank you.

  The first thing you need to do is to post in the appropriate forum.  This is the forum of the Actionscript 3.  Since you say that your file is an AS1 file, you should post in this forum.  Here is a link for him:

  http://forums.Adobe.com/community/Flash/flash_actionscript?view=discussions

  When you post in this forum, show the code (getURL) that you use.

  If you intend to modify this file to a design of the AS3, then continue with this announcement and make sure that you change the settings of publication to agree.  Follow-up by displaying the AS3 (navigateToURL) code that does not work for you.

• End of sale (EoS) / end of life (EoL) information on Cisco TelePresence system 1700 MXP

  I have a question about the EoL (http://www.cisco.com/c/en/us/products/collaboration-endpoints/eos-eol-po...) policy and the announcement of EoS/EoL Cisco TelePresence system 1700 MXP (http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints...).

  According to the policy of the EoL, paragraph 4 ter, "after the first year and for the operating system SW - if available - we will offer bug fixes, versions of maintenance, workarounds or patches for a period of 4 years for operating system software."  Therefore, it is 5 years after the Date of the EoS, which could make the OS support close on 28/02/2017 EoL products.  I'm one to believe that a product and its applicable operating system are good as long as the company provides patches for bugs/flaws.

  My question is about the migration of the product suggestions.  The suggestion is to "migrate to the Cisco EX Series (the EX60 or solution EX90) telepresence system."  However, when the announcement of EoS/EoL EX60 inspection, the "SW maintenance communicated End Date of: HW, SW OS ' 06 07, 2016.  Note that it is not the end of Maintenance SW verbiage in 1700 MXP EoS/EoL announcement.  I'm under the assumption that the new product within OS support only one model exceeded?  Why anyone would follow the suggested migration if I get fewer months support OS than an older model?  Should I go out of date on the announcement of the EoS/EoL, or use the 5-year rule as shown in the end of life policy.

  If I am interpreting this wrong, please do not hesitate to correct me.  I am trying to understand the explicit verbiage in the end of life and ads EoS/EoL policy.

  As the 1700 MXP announcement was published in 2011, at that time, the EX60/90 was a legitimate substitute. However years later, endpoints EX Series are now EOS, you should look at alternatives for the EX series instead.

  The announcement of the EOS/EOL indicates a date of end of software support, you should go there. The reason that ad 1700 MXP does not list one could be that the date of assumption of the software had already spent or they simply don't have the list at the time. Looking at the latest version of the software for the 1700 MXP, it's F9.3.3 in 2014, I highly doubt, there will be another, but you never know given that other points of MXP endpoints that are not past their published end date of software support.

• Problem about the iPhone 6 s MORE and Ford SYNC (Ford Ecosport) bluetooth pairing.

  Hello Apple community!

  I have an iPhone MORE 6s firmware iOS 9.2.1 running and a Ford Ecosport trend M/T (bought last March 2015).

  I always pair my iPhone with audio system in my car (Ford SYNC) every time I jump in my car every day. I drive 4 hours per day and I'm fond of listening to music with my iPhone through the car radio in my car. But while playing music a few days ago my iPhone just disconnected my car bluetooth device. I tried to pair it several times, but it keeps disconnecting. I switched to the USB mode (I always connect my iPhone to my car for the end of charge and also to listen to music when I want to disable my iPhone bluetooth), my iPhone is connected, but all I hear is static, whenever I play music from my iPhone.

  I tried to delete my audio system phone master reset Ford SYNC and bluetooth devices list and also reset my iPhone, but it still shows the same results. I would appreciate anyone's response on what I live now.

  Thank you so much in advance!

  PS: I already upgraded my iPhone iOS firmware to 9.2.1 before that happened.

  Kind regards

  Marc

  Hello, m.asebo.

  It seems that you are having problems with your iPhone 6s more lose connection to the audio system of your car there. You did some great troubleshooting so far. Great job. The following Knowledge Base article offers up a few big steps to troubleshoot your iPhone:

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

  First try these steps

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
  6. Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connectagain.

  If you still cannot match or connect your Bluetooth accessory

  Check with the manufacturer of Bluetooth to make sure that your accessory works with your iOS device. Contact the Apple Support if you have any of these problems:

  • You can't turn on Bluetooth or the setting is gray.
  • You cannot connect any Bluetooth accessories with your device.
  • The accessory manufacturer has confirmed that your accessory works properly.

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• problems with a Probook s 4530 and earn 8.1 x 64 and card RALINK Wireless

  Good afternoon

  I have reported a problem with the installation of Win 8.1 Enterprise on a HP Probook 4530 s which has a RALINK RT3592BC8 wireless card installed.  This card has the info printed on it.

  Rev: 01:00

  SPS:630813 - 001

  Release date: 2011/05/21

  Mac ID: 68A3C4BBD32E

  CT: GBRFA00FK0M86K

  SPS: 630813-001

  HP part number: 629887-001

  WCBN607RH-H1

  THE COMIC BOOK ID: 68A3C48947BF

  The laptop had already installed a copy of the company to earn 8 x 64.  the laptop was working fine on this OS, however we migrate to Win 8.1 Enterprise but this laptop would never apply the inplace upgrade.  We were trying to replace the older readers of 5200 RPM in laptops, and I bought an SSD 250 GB EVO 840, and as I was replacing the HARD drive, I also decided to install Win'a 8.1 x 64 business.  The installation went well until installing Windows begins loading the drivers.  Around 60% the error came that there was an error "irq not less or equal to".  I checked the HARD drive in another machine and was able to install a business Win 8.1 x 64 on it, so I wiped the install and tried again.  Failed a second time.

  At this point, I thought that there was a device that Win 8.1 wasn't satisfied and as by chance the wireless card was easy access to the laptop so it was my 1st point of call.  Installation went through after withdrawal of the wireless card and try again the installation of win, fine.  I was also able to install our 2013 Office without problems and the 1st round of updates to victory.  On the 2nd round, I thought I want to reinstall the wireless card, for cranking up the dreaded irq not less or equal to returned to the top and the machine was in a reboot cycle.  During a start/stop cycles, I turned off and removed the wireless card and the machine very well.

  It seems that there may be a problem with the card stock RALINK RT that comes with a HP 4530 wireless.  At this point, I had to remove the card from the laptop, until I can find an alternative.

  I see a lot of messages about the causing problems ralink drivers/device, but I can't seem to find the right driver to use for the x 64 bit 8.1 on a 4530 (map exceed the details) and what the correct procedure is to have this card works correctly for future upgrades of windows?  can someone enlighten me please?

  Thank you

  Mike

  Hi, Mike:

  The only suggestion I can offer is to try the latest version of the driver Ralink W8.1.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_142231_1

  If this does not work, I suggest you only replace the card wireless with one of those enrolled in the service manual has a better chance of working with W8.1, such as an Intel wireless card.

  When I click on the support page for the 4530 s, I see only a limited amount of W8.1 drivers available which normally isn't a good thing about the compatibility of the device 100% with an operating system.

• Problem: I can't activate windows vista even with "phone activation".

  Hello world
  I just re-formatted my computer and now I am asked to activate windows Vista Edition Home Premium x 32.
  I try to activate it, but I want to take this message: your product key is already in use!
  I try the phone activation but when I call it just make the noise characteristic beep beep beep and then my call ends.
  I have genuine Windows Vista product key (bought).
  I never gave my reference to anyone.
  So I don't know what the problem... Help, please.

  Thanks in advance. Jim

  The second is a general for the Greece phone number as you have indicated that your country is the Greece. If you dial the number and explain your activation problem and the phone number doesn't work not they may be directly connect you to support or you give a better number to use.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Problem with a SIP Trunk between VCS and CUCM

  Hello world

  I created a SIP Trunk between control VCS (X7.1) and a CUCM 8.6.

  I followed this Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_6-1_7_8_and_X7 - 0.pdf deployment guide.

  The trunk is in place, but I have the following problem: I can ring since an EX90 recorded on the VCS for a registered on the CUCM 9951 but when I take the call, I have a busy signals (audio and video). When I on the EX90 9951 ring, I have the following message on VC: can not reach the contact.

  I have a 503 service unavailable status on the call history and "call rejected" on the event log.

  My transformation is OK and the call is sent to my neighbor CUCM zone

  You have an idea to solve this problem?

  Thanks for your help

  Best regards

  Bruno Z.

  Hello

  Yes, it's true! It seems at first glance a problem with codec negotiation when I see the reason 47 code.

  in any case set the region to G.711 trunk phone in case if you have different device pool and the trunk region and ip-phones.

  make G.711 end to end and test again.

  Thank you

  Alok

• Breaking a year in coming weeks of beginning and end Dates (parameters) and first and last day of the month

  Hello people:

  I have currently a query that picks up all the weeks between a date range where my week starts on Thursday and ends on Wednesday. The following query works fine except that I need the week of beginning and end, from beginning and end Dates of months and the beginning and the Dates of end of the values of the settings, I'm passing. In this case, I chose January 1, 2013 to 31 December 2013.

  Any help or pointers would be great!

  Thank you!

  Problem: I am picking up days of December 2012 as the first week began on December 27, 2012. In addition, in December, I'm pretty much lost last week as well (26 December - 31 December).

  The request in hand:

  SELECT first_thursday + (7 * (LEVEL - 1))   AS week_start_date,
                   first_thursday + (7 * LEVEL) - 1    AS  week_end_date
  FROM
  (
    SELECT TRUNC(p_from_date + 4, 'IW') - 4   AS first_thursday, -- Week should start the pre ceeding THURSDAY based on the Start Date
                    TRUNC( p_to_date + 4,  'IW') - 5     AS last_wednesday
    FROM
    (
      SELECT to_date('01-JAN-2013') AS p_from_date,
                      NVL(to_date('31-DEC-2013'), SYSDATE) AS p_to_date
      FROM     dual
    ) parms
  ) end_points
  CONNECT BY LEVEL <= ( last_wednesday + 1 - first_thursday)/7;
  

  Currently, this is the result I get (I'm only including the months of January and December here).

  Week_Start_Date     Week_End_Date
  27-DEC-12                02-JAN-13
  03-JAN-13                 09-JAN-13
  10-JAN-13                 16-JAN-13
  17-JAN-13                 23-JAN-13
  24-JAN-13                 30-JAN-13
  31-JAN-13                 06-FEB-13
  

  December:

  28-NOV-13               04-DEC-13
  05-DEC-13              11-DEC-13
  12-DEC-13              18-DEC-13
  19-DEC-13              25-DEC-13
  

  What I would really like is based on start and end Dates, as well as the first and the last day of the month is similarly try nicely. I have provided and then gently break at the end of the month:

  January:

  01-JAN-13              02-JAN-13
  03-JAN-13              09-JAN-13
  10-JAN-13             16-JAN-13
  17-JAN-13             23-JAN-13
  24-JAN-13             30-JAN-13
  31-JAN-13             31-JAN-13
  

  February:

  01-FEB-13    06-FEB-13
  07-FEB-13    13-FEB-13
  14-FEB-13    20-FEB-13
  21-FEB-13    27-FEB-13
  28-FEB-13    28-FEB-13
  

  November:

  31-OCT-13    06-NOV-13
  07-NOV-13    13-NOV-13
  14-NOV-13    20-NOV-13
  21-NOV-13    27-NOV-13
  28-NOV-13    04-DEC-13
  

  December:

  01-DEC-13           04-DEC-13
  05-DEC-13           11-DEC-13
  12-DEC-13          18-DEC-13
  19-DEC-13          25-DEC-13
  26-DEC-13          31-DEC-13
  

  Hello

  Roxyrollers wrote:

  Hello people:

  I have currently a query that picks up all the weeks between a date range where my week starts on Thursday and ends on Wednesday. The following query works fine except that I need the week of beginning and end, from beginning and end Dates of months and the beginning and the Dates of end of the values of the settings, I'm passing. In this case, I chose January 1, 2013 to 31 December 2013.

  Any help or pointers would be great!

  Thank you!

  Problem: I am picking up days of December 2012 as the first week began on December 27, 2012. In addition, in December, I'm pretty much lost last week as well (26 December - 31 December).

  The request in hand:

  1. First_thursday SELECT + (7 * (LEVEL - 1)) AS week_start_date,
  2. first_thursday + (7 * LEVEL)-1 AS week_end_date
  3. Of
  4. (
  5. SELECT TRUNC (p_from_date + 4, 'IW') - 4 AS first_thursday,-week should start to perform the pre-mounted THURSDAY based on the Start Date
  6. TRUNC (p_to_date + 4, 'IW') - 5 AS last_wednesday
  7. Of
  8. (
  9. SELECT to_date('01-JAN-2013') AS p_from_date,
  10. NVL (to_date('31-Dec-2013'), SYSDATE) AS p_to_date
  11. OF the double
  12. ) parms
  13. ) end_points
  14. CONNECT BY LEVEL<= (="" last_wednesday="" +="" 1="" -="">

  Currently, this is the result I get (I'm only including the months of January and December here).

  1. Week_Start_Date Week_End_Date
  2. DECEMBER 27, 12 2 JANUARY 13
  3. JANUARY 3, 13 JANUARY 9, 13
  4. 10 JANUARY 13 JANUARY 16, 13
  5. 17 JANUARY 13 23 JANUARY 13
  6. 24 JANUARY 13 30 JANUARY 13
  7. 31 JANUARY 13 FEBRUARY 6, 13

  December:

  1. NOVEMBER 28, 13 4 DECEMBER 13
  2. 5 DECEMBER 13 DECEMBER 11, 13
  3. 12 DECEMBER 13 18 DECEMBER 13
  4. 19 DECEMBER 13 DECEMBER 25, 13

  What I would really like is based on start and end Dates, as well as the first and the last day of the month is similarly try nicely. I have provided and then gently break at the end of the month:

  January:

  1. JANUARY 1, 13 2 JANUARY 13
  2. JANUARY 3, 13 JANUARY 9, 13
  3. 10 JANUARY 13 JANUARY 16, 13
  4. 17 JANUARY 13 23 JANUARY 13
  5. 24 JANUARY 13 30 JANUARY 13
  6. 31 JANUARY 13 JANUARY 31, 13

  February:

  1. 1ST FEBRUARY 13 FEBRUARY 6, 13
  2. 7 FEBRUARY 13 FEBRUARY 13, 13
  3. 14 FEBRUARY 13 FEBRUARY 20, 13
  4. 21 FEBRUARY 13 FEBRUARY 27, 13
  5. 28 FEBRUARY 13 FEBRUARY 28, 13

  November:

  1. 31 OCTOBER 13 NOVEMBER 6, 13
  2. 7 NOVEMBER 13 NOVEMBER 13, 13
  3. 14 NOVEMBER 13 NOVEMBER 20, 13
  4. 21 NOVEMBER 13 NOVEMBER 27, 13
  5. NOVEMBER 28, 13 4 DECEMBER 13

  December:

  1. 1ST DECEMBER 13 DECEMBER 4, 13
  2. 5 DECEMBER 13 DECEMBER 11, 13
  3. 12 DECEMBER 13 18 DECEMBER 13
  4. 19 DECEMBER 13 DECEMBER 25, 13
  5. 26 DECEMBER 13 DECEMBER 31, 13

  Why the "weeks" in November, have all 7 days, while the "weeks" in the first or the last week in the other month usually have less?  (For example, February 28 is a 'week' alone.)

  The following works for the other months:

  WITH all_days AS

  (

  SELECT DATE "2013-01-01' + LEVEL - AS a_date 1

  OF the double

  CONNECT BY LEVEL<=>

  )

  SELECT DISTINCT

  More GRAND (TRUNC (a_date + 4, 'IW') - 4)

  , TRUNC (a_date, 'MONTH')

  ) AS week_begin

  , The LEAST (TRUNC (a_date + 4, 'IW') + 2

  TRUNC (LAST_DAY (a_date))

  ), Week_end

  Of all_days

  ORDER BY week_begin

  ;

  Output:

  WEEK_BEGIN WEEK_END

  ----------- -----------

  January 1, 2013 January 2, 2013

  January 3, 2013 January 9, 2013

  January 10, 2013 January 16, 2013

  January 17, 2013 January 23, 2013

  January 24, 2013 January 30, 2013

  January 31, 2013 January 31, 2013

  February 1, 2013 February 6, 2013

  February 7, 2013 February 13, 2013

  February 14, 2013 February 20, 2013

  February 21, 2013 February 27, 2013

  February 28, 2013 February 28, 2013

  ...

  November 1, 2013 November 6, 2013

  November 7, 2013 November 13, 2013

  November 14, 2013 November 20, 2013

  November 21, 2013 November 27, 2013

  November 28, 2013 November 30, 2013

  December 1, 2013 December 4, 2013

  December 5, 2013 December 11, 2013

  December 12, 2013 December 18, 2013

  December 19, 2013 December 25, 2013

  26 December 2013 31 December 2013

• First Pro compatibility with 5.5 projects and pricing

  I am using dedicated to Adobe Premiere Pro 5.5... Well, as long as I can remember, and I plan to move to Premiere Pro in the following Creative Cloud. I was wondering how it is easy to import my old 5.5 projects in the more recent versions, and if there is no problem of compatibility?

  I was also curious about the price. I currently have a subscription 'photograph', giving me Photoshop and Lightroom for 8.57GBP / month. To add a single application, I see the price is 13.72 per month, but is this on top of my subscription in progress, or what triggers it to? What is the best way to the addition of Premiere Pro to my subscription?

  When you add a program you add the cost of a program to the subscription you already have

• Compatibility of EVA from HP and VMware SRM

  Hello

  I'm on the side of VMware VMware vCenter 5.1 Update1 with MRS 5.1 installed Update1.

  HP, side I have the hardware/software on both sites:

  -HP EVA 6350 with XCS 11001100

  -HP. view Comand 10.1

  -HP P6000 EVA SRA 5.01.0

  -HP continuous access

  I had a problem with the State of replication group DR get suspended trying Reprotect in the restore process. Gives me the following error"

  «Error - cannot reverse the replication for the consistency group «...»» ». SRA command 'prepareReplication' failed for the consistency group. The fault of server 'ExtendedFault' was no message'

  I searched through the VMware/HP compatibility matrix in the VMware and HP sites, but could not find a clear answer for compatibility issues.

  I check the next page:

  VMware Compatibility Guide: sra

  Anyone who has experienced such a problem with process Reprotection?

  I found the solution to my problem!

  When I went through of the HP Command View and found the path of I/O replication is passed to suspend

  and when I turned it to RESUME a full copy has begun and everything went well.

  NetRock,

• sum of sal and comm in the emp table

  Hi all
  
  for the table emp with enam, eno, dept, sal and comm fields
  
  I want to display a field in oracle forms 6i, who will show me the sum of sal and comm
  
  I've created a field of no database
  and wrote this code in the formula

  declare
  summ number(10);
  begin
  
  summ=:sal + :comm
  end;

  but I get the compilation failed
  
  kindly Guide
  
  thanking in advance

  Hello

  your code

  declare
  summ number(10);
  begin
  
  summ =:sal + :comm  --this line must be  summ :=  nvl(:sal,0) + nvl(:comm ,0)
  end;
  

  Try this code to a trigger
  change after exp.

  declare
  summ number(10);
  begin
  
  summ := nvl(:sal,0) + nvl(:comm,0)
  end;
  

  or send me your complete code.
  Thank you