8.1 will not install after updating

Similar Questions

• my computer will not install the update of security for Windows XP (KB2481109)

  Moderator before go Note: IE8.
  -----

  my computer will not install the update of security for Windows XP (KB2481109) can you help me.

  Hello

  (a) don't you try to install the update manually?

  (b) you get any error message?

  (c) don't you make changes to the computer until the problem occurred?

  (d) what anti-virus software is installed on your computer?

  I suggest you try the steps below and check if it helps

  Method 1:

  If you have installed a security software on the computer, then I suggest you to temporarily disable a software antivirus installed on the computer and check if the same problem occurs

  Note: Please make sure that you activate the software of Antivirus\Firewall after the test to keep your computer protected.

  Method 2:

  I would say as you try to perform the clean boot and then try to install the update and check if it helps, here is the link:

  http://support.Microsoft.com/kb/310353

  Make sure that return you the computer to a normal startup mode once it's done.

  Additional information: make reference in the link below:

  http://support.Microsoft.com/kb/2481109

  Hope this information is useful.

• iPad 2 will not activate after update 903

  iPad 2 will not activate after update 903 said only: update completed and just a few steps and you're done displays white screen

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Take a look at these articles:

  Solve the iOS update and restore error in iTunes - Apple Support

  Get help with iOS update or restore errors - Apple Support

• Windows Update will not install downloaded updates.

  Win 7 pro x 64

  AVG AV worm: 9.0.869

  Zone Alarm Pro ver: 9.3.014.000

  Malwarebytes worm: 1.46

  SpyBot S & D worm: 1.6.2

  Ad-Aware Free (2010)

  This is my first post on this forum so excuse all the errors in the placement of the info.

  WU, MU will not install the updates downloaded or optional updates selected. No error code is given, it remains at 0% for as long I leave or I cancel installation. I tried to install individually in MS catalogue still will not be installed. This is a new computer that I built in July and punishment, it has not been used. It's strange because for the first three weeks of this computer, I had no problem with the installation of all available updates, or anything else. Then when the updates of August were available I chose all security updates and install optional updates that have already downloaded click on the button and nothing happened, it remained only on 0%. My question is, is there an update that was given earlier that caused these updates not installed? I really want to use my new computer, but I don't like to run without new security and the latest updates. I had trouble before what do.

  I used all the security software listed above on all my computers for about 5 to 10 years and non of them are set to prevent windows update from working.

  Please try another attempt to update, y d diddty. During the update installation fails again, close Windows Update.

  Open the WindowsUpdate.log and copy & paste in at least the last 50 lines or so, in your response, please.
  How to read the Windowsupdate.log file

  Meanwhile, suggest to configure Windows 7 to the clean boot and see if he can install updates in the clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: in the Clean boot state ZoneAlarm will be disabled. Make sure that the native Win 7 firewall is now on in the Panel.

  While in the clean boot state, you can also try to download and Save the Fixit found here -How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Now launch Microsoft Fixit 50202.msi and choose the default mode.
  When it has finished turn the system reboot to clean it from same start State and see if updates can install now.

  If no joy, run the Fixit once more and choose aggressive mode.
  Then restart on the same State of clean boot and see if update succeeds now.

  Expert MowGreen Windows IT Pro - consumer safety

• First Pro CS5.5.2 will not install after the replacement of the motherboard?

  First Pro CS5.5.2 will not install after replacing mothboard. It was running properly for 4 weeks before changing due to problems connecting AC and wireless connectivity.

  Adobe, case No. 183519673, Adobe engineers (Asia/Pacific) have worked on this issue for more than 3 hours with no result after uninstalling and reinstalling.

  Ideas for resolving the issue wou; LD appreciated.

  Also available at the section of material http://forums.adobe.com/message/4634472

  There is a new forum for download & install and installation issues

  http://forums.Adobe.com/community/download_install_setup

  Or, call Adobe

  In the United States - Adobe install problems 800-642-3623

  In the United States - Adobe Activation 866-772-3623 Open 24/7

  I offered to provide information of make and model of motherboard

  [Additional information about else added]

• IPad 2 will not activate after update

  IPad 2 will not activate after the update this morning he says "could not activate ipad, ipad could not be activated because the activation server is temporarily unavailable. Try to connect your ipad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple to Apple.com/uk/support support.

  I tried to connect my ipad to iTunes and I get the same message that I have also restored the ipad and still the same message from Paris! Started to get a little frustrated now. Any help would be great.

  Many users encounter this problem. The server may be overloaded. I suggest to wait and try again later. This can be irritating, but it seems that the only solution for now.

• I am running microsoft updates and ITMU and will not install an update for windows xp (KB2641690)

  I am running microsoft updates and one update for windows xp (KB2641690 will not install)

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/822798

  It will be useful.

• iPad will not activate after update to 9.2.1

  iPad does not illuminate after update to 9.2.1 we get the white Apple then disappears and nothing...

  Try a forced reboot. At the same time hold the sleep and home buttons until the Apple logo appears on the screen.

• Unable to upgrade to Windows 8.1, Windows store does not and will not install Windows Update.

  Original title: hard to upgrade to 8.1 - My App store Windows will not open, Windows updates Pc settings does not.

  Everything on my laptop is saying that it is "not responding" - opening of the photos, for example. My apps are no longer compatible - for example my e-mail address is not updated. I think it's all related to not updated to 8.1 - having a knock on effect to all the other bits on the laptop.

  The problem is won't let me upgrade. I understand that it is a slow process, but it won't let me even go up to the store to upgrade. What can I do?

  Really sad about that I just bought my laptop 3 months ago a result already loads of problems with it. (ACER LAPTOP WINDOWS 8)

  I had the same problem and finally came up with this fix. I hope it works for everyone who suffered from this annoying problem. Go to control panel, system, and security, the Action Center. In the center of the Action, open the settings Windows Smartscreen. Do not do anything (turn off Smartscreen Windows) check.

• Windows Vista will not install new updates after installing SP2

  Hi, I have a problem with the update of my windows. It started after a fact a factory reset. Here's the history:

  I have a some what old laptop (8 years). It came with a Vista installed with service pack 1 installed at the factory. Over the years, I did a few factory resets (every 2-3 years). I never had problems up to now. What is happening now is that I can not exceed SP2. I tried two different ways, none of them worked. After the reset, I first uninstall a bunch of stupid programs that came with the laptop, and then defragment and then have two ways to proceed. I tried to use windows update, installed more than 100 updates, updates install held until finally I offered service Pack2, installed successfully but then no more updates were offered. Then I tried a different approach - a new reset, uninstall, Defrag, and then downloaded and installed SP2 directly from the Download Center. And again the same thing happens. From the SP2 installation I check updates, download the new update agent and nothing happens after that. He keeps looking for new updates all day (about 50% of the processor by using all the time).

  I read some articles and discussions but could not find anyone with the same problem (most of the users reported some error codes which is something I can't do). I tried the fix tool - it does nothing! Whenever I run it, it is mistakes - sometimes 2, sometimes up to 5. Sometimes, it makes account all fixed, other times that it reports missing or corrupt files do not set. Whatever the results if I restart and when I try to check for updates again it is still the same story.

  Also I tried to install it manually IE9 as soon as SP2 is installed (I understand that this is not supported under SP1) but the installation fails. I expected to be available in updates, but as I don't get updates I tried to install it myself. Not sure if it's related (although I guess it is), but the Defender is not able to verify new definitions either.

  Any suggestions? Maybe the registry is damaged or some of the files using the update agent is are corrupt? There are currently no antivirus program installed that could block whatever it is. I haven't touched Windows Firewall somehow everything must therefore be attributed to the default values.

  You understand is that? I came across exactly the same problem... restoration of an old book to give to a family member, and every time I came to the point of installing SP2 and a more recent windows update agent just after, I couldn't install more updates. It would block 'check updates' forever. Tried twice, same problem. However, I tried some things differently the third time and exceeded the question.

  Let me know if you still need help, and I will respond with what I've done.

• Windows Update will not install after reboot required.

  Update of security for Microsoft Visual C++ 2005 Service Pack 1 (KB2538242).

  I'm running Windows 7 x 64.

  I have a Windows update that requires the closing down to install.   This is not, and after reboot, I have a slower computer.

  At this point, even removing the offending program would be useful.

  Thank you for your expertise.

  Hello

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  In the case where you are not able to install specific updates then, try the troubleshooting provided in the link below steps to fix the problem.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 2:

  You can also try to reset the Windows Update components and check if that helps.

  Click on the link provided below for more information about resetting Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3:

  Start the computer in a clean boot state and then try to download the updates manually.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Download the updates manually from the link provided below.

  MFC Package security update Microsoft Visual C++ 2008 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26368

  MFC Package security update Microsoft Visual C++ 2005 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?ID=26347

  I hope this helps.

• Why firefox will not start after update?

  Update the alert message. Did a hard stop. Rebooted computer and Firefox will not open.

  Maybe during the update some files were corrupted, try a clean reinstall:

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

  Also:

  • Firefox in safe mode
  • Reset Firefox
  • Create a new profile

• Vista will not start after update 09/12/2009.

  After you install the updates available for me on December 9, 2009, Windows Update wanted the computer to restart to complete the installation. I made and went on my merry way. A while later, I rebooted the computer, but the screen resolution was twisted, is no longer big screen, had compressed air and had a strange grid points, and after the progress bar Windows Vista, the screen remains black - the Welcome screen never showed up.

  Kick system repair CD, found 'a fix will prevent' and system restore suggested. Subsequently, attempted to start Vista, but got the same result as before. Tried the CD to repair a few times more and always suggested the same thing, leading me to believe it was not actually the application of the system restore.

  Vista is able to boot in safe mode and safe mode with networking and attempted a restoration of the system from there to just before the patch, the night before (a prior restore point updates 12/8) and a point 12/5. In all cases restarted to complete the restoration and then rebooted to see if it worked - never did. Whenever I went to the system restore, it doesn't seem like it had restored any point...

  Attempted to launch Windows Update in safe mode, but nothing happened. Went to the windows update website to see if I could get the ActiveX update, but he comes to propose I have run Windows Update from my computer (nice), with no 'help' link or other way to declare that it did not work.

  Went into Add/Remove programs to see if there was an installable patch listed, but it does not list something beyond mid-November.

  Help. =[

  Run the System File Checker (the command is SFC/scannow) from the command prompt.  Also check that your system has all virus\malware.  Here is a link to a thread with some good information: get rid of malware

  You can also run a disk error check as well.    Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop will not stop after update to 8.1 windows

  I have a new aspire E1 - 572G that will not stop completely during a windows 8.1 update

  I updated the Bios and downloaded the drivers from the support site.

  I did a restore to factory default settings and tried... again no luck

  I installed windows 8.1 after installing the updates for windows al.

  I'm not left how to solve this problem!

  Any suggetions are welkom.

  Found! Why are there two displayadapters in this notebook?

  I removed the intel one and rebooted. Windows dectected the displayadapter of intel again... problem solved!

• My your whatsapp will not change after update

  I'm back changing my tone whatsapp after the update, but it will not change back

  Greetings, cazrose. Thank you for the communities of Apple Support!

  I see that WhatsApp is not allowing you to change his ring back to what it was after upgrade your iPhone to iOS 10 6s. I'll be happy to help you!

  How can I change my ringtone for WhatsApp? -Follow the instructions of the support that I have found on the site of WhatsApp.

  Have a great day!