8 flow HP stuck on recovery: 8 HP stuck on the recovery flow

Similar Questions

• Stuck on the screen of HP recovery and cannot start windows

  HP Pavilion
  Model: 17 - 1215dx
  
  If you need the serial number or the fn, just ask. I didn't post too much sensitive information.
  
  It was originally 10 64-bit windows... but now has 8.1 Windows 64-bit
  i5 8gig of RAM processor
  
  Literally just close the lid and open it upwards and it wouldn't boot windows. It is stuck at the screen HP saying it's diagnose my problem. Tried a soft reset and a hard reset when you remove the battery and put it again while it is unplugged. Did not help. I can't start in safe mode. I tried to do a restore which has been a success but it restarts when he says "there was a problem, restart your PC. I'm frustrated and reset a factory and the same factory reset was successful and was when he came back to 8.1 because it's the OS, I bought it with but then it still wouldn't let me in windows. I was going to try and start to repair, but if I had known this would require an administrator I'd never have done the factory reset. I know I've been reckless, but I just wanted to work. But yes, I don't know what the problem is. I feel like if it was a hardware problem is just something to keep windows to operate. Should I try a repair disk? Would that help?

  The SecretLight

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post you need to grab your laptop and wanted to help - but we need more information.

  You said that your laptop came originally with Win10, but then later, you said you tried to go back to Win8.1, you can then said, it's the original OS.

  So, who was the original - Win8.1 or Win10?

  Ask because if it came with Win8.1 and you UPGRADED to Win10, while Microsoft tells you that there is no risk in the upgrade of Win10, because they allow you to believe that you can always go back to your original OS and setup within 30 days, the ugly matter faction is that the Win10 GoBack feature turned out to be unreliable - and when it fails She can let the machines in a corrupt State - which is not always the case, it happens often enough to be a problem, but you will get no warning beforehand that he goes to the trash your PC!
  
  The Win10 upgrade is known, in some cases, corrupt the partition of recovery that are stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.
  
  What will work restores your computer to its original factory state using HP recovery media. It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the thumbs-up symbol to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

  I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

  Replace your hard drive.

  You have a backup of trust? If not, buy a disc of exterrnal for that as well.

  The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

• My office is stuck on the Active Desktop recovery

  My office is stuck on the Active Desktop recovery and when I try to get it back I get nothing. Help! Windows XP

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• System Recovery is stuck in the installation. Someone help?

  I do a system restore on my HP m9425f. Finished reformatting the hard drive, it is stuck at the installation. Already two hours but always on display 0% completion. Can anyone help?

  I would check the disk hard is good from the. manufacturerer site drive and get the diagnostic software that they use.  For WD, it is called Data Lifeguard Diagnostic for BACK (CD): http://support.wdc.com/product/download.asp?groupid=606&sid=3

  Make the CD and boot it to run the tests.  Or run them from this: http://www.ultimatebootcd.com/

  Picking the appropriate manfacturerer.

• VMWare Studio is stuck with the transitional VM does not complete the PostInstall script.

  Hello

  I ran into a situation where the Studio VM got stuck with the post-installation script control that went wrong. The failure is shown in the Studio hanging as shown below.

  Build-a-failed/hung:

  2009-11-30 10:57:29 more than 30 minutes are elapsed during the configuration of the virtual machine.

  2009-11-30 10:57:29 if there is an abnormally long time to commissioning of your virtual machine

  2009-11-30 10:57:29 to complete, please check that the construction is progressing

  2009-11-30 10:57:29 observing the < 192.168.122.75 > console of the virtual machine being put into service.

  2009-11-30 11:28:06 more than 30 minutes are elapsed during the configuration of the virtual machine.

  2009-11-30 11:28:06 if there is an abnormally long time to commissioning of your virtual machine

  2009-11-30 11:28:06 to complete, please check that the construction is progressing

  2009-11-30 11:28:06 observing the < 192.168.122.75 > console of the virtual machine being put into service.

  What's happened is that the transitional VM has restarted before the post-installation script came out. However, in the past, I had noticed that the VM Studio that recognizes and cleans. In this case, there no cleaning. A previous generation succeeded as shown below. My question is if there is any command the virtual machine of comments/provisional, which 'determine' the completion of the Post-Install, so the Virtual Studio machine can pick up and transfer/package the bits of the vmdk disk images and give me a successful build? I know that all the elements of post-installation script had been completed successfully.

  If the build was successful:

  2009-11-30 05:01:41 if there is an abnormally long time to commissioning of your virtual machine

  2009-11-30 05:01:41 to complete, please check that the construction is progressing

  2009-11-30 05:01:41 observing the < 192.168.122.75 > console of the virtual machine being put into service.

  2009-11-30 05:18:11 the transient VM is now in offline mode. Post-OS Setup log file recovery...

  2009-11-30 05:18:11 installation is complete.

  2009-11-30 05:18:11 post-OS installation error checking...

  2009-11-30 05:18:12 VM carrying host provisioning to Studio; This may take a few minutes...

  2009-11-30 05:53:15 provisioning host cleaning...

  2009-11-30 05:53:15 checking if provisioning session is still alive and the transient virtual machine is always on.

  2009-11-30 05:53:36 Unregistering transitional VM configuration host.

  2009-11-30 05:53:36 remove transitional VM configuration host.

  2009-11-30 05:53:38 the development of the virtual machine.

  2009-11-30 05:53:38 packaging of the virtual machine.

  In the normal flow, you shouldn't have to do something special for "cessation of distribution".  The VM output should be in/opt/vmware/www/build / < instance-bld > / export dir in the VM Studio when using Studio to build a W2K8 device without your installed application. The Studio build process is now out of the picture. You can then copy or import the virtual machine to your platform of choice virtualization, power, install your application, closing. And copy (or distribute) the VM whenever you want.

• My iPhone 6 is stuck on the apple logo

  My iPhone 6 is stuck on the apple logo. If I put it to download it just stays like that or it stops and says it has no battery, even when plugged. I can't enter in recovery mode because my home button just stopped working out of the blue. I don't know what to do.

  Charge the battery for an hour and then try the recovery mode.

• Stuck at the apple logo &amp; no backup to restore

  Well, I have an iPhone with ios 9.3.3 6. When I turn on my phone it stuck at the apple logo and after 10 seconds it turns off and when I turn it on again, same question.

  • Not having iTunes backup
  • No effect after hard reset
  • Tried to resolved via Recovery Mode, updated and restored but the problem is always there, always stuck and goes off

  Did you put your iPhone in DFU mode before resetting?

• my phone is stuck on the load screen

  I was just on my phone and it glitches so I pressed the home page and lock button to restart and now it is stuck on the load with the apple logo screen, and I can't do anything else that turn it off but when I turn back goes back to the load up screen.

  Put your iPhone into recovery mode as described here.  You may try to go into recovery mode more than once to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• iPad 2 Mini stuck on the progress bar with the Apple logo and progress bar is not loaded, his impasse

  I pressed on restart all the settings on my iPad Mini 2, so it loaded but it drained. So I rebooted it until he turned back when he turned his back, it was still showing the progress bar, but it was quite moving. I tried to hold down the lock button and the home button, but still, it loads, its stuck on the progress bar and did not progress. I tried to connect to my computer to connect to itunes, but it does Duke host because its deadlock on the progress bar with the apple logo.  .pls help me!

  Try restoring your backup and recovery mode: If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

• Stuck on the Apple Logo screen

  My phone froze so I restarted. It got stuck on the apple logo screen and I tried to restore it. When I have it plugged into my laptop it would not restore because my boot drive is full. I tried to remove as much as I could turn off my laptop and emptying the trash and nothing will work. Its been sitting stuck/frozen on the logo of apple for 4 hours now. How can I fix it?

  Only way runs a restore via iTunes by putting the iPhone in recovery mode

• HP w1907: implementation gets stuck to the 'HP invent' blue Boot Screen

  Hi all
  
  I have HP w1907 desktop... I use it since 2008.
  Last month I format to have the new windows 7 in it... Previously I was also working with win7 Ultimate.

  But it's keep restarting after the use of 4-5 minutes and so I installed the entire operating system yet.

  It worked very well... after 3-4 weeks, when I started it, it gets stuck at the 'HP invent' blue Boot Screen.

  This display has the instructions to enter the "Boot Menu", "Setup" and "System Recovery" by pressing key "F11" aor "Esc", "F10".  It is just there for ever.

  If I try to enter the 'Boot' Menu by pressing the 'Esc' key, I get the message "Loading Boot Menu... ", but then it hangs there forever just.  If I try to enter the "Setup" Menu, I get a similar result - it says 'enter the Setup... ". "and just hangs there.  By pressing the "F11" key does not seem to do anything.

  Any ideas on how to solve this problem?

  Searching the forums I tried to reset the BIOS - who I've got from here:

  http://h30434.www3.HP.com/T5/desktop-lockups-freezes-hangs/powering-up-gets-stuck-at-Blue-quot-HP-in...
  
  and
  
  http://support.HP.com/us-en/document/c01080282
  
  After doing this too, the result is null

  Please help me...

  I'm in a hurry...

  Thank you.

  Date and the incorrect time can certainly cause problems.  What happens usually, however, is that the sites Web will not be opened because the State in which the certificate is not up-to-date.  I have not heard of the time and date causing the computer does not start.  I think that you need to change the CMOS battery.  Here's a guide on how to change it.  The guide has also some good troubleshooting information.

  Once the battery has been replaced, we'll see what happens.

• Satellite T130 - stuck on the loading screen - new hard drive required

  After a message on the screen saying back up your hard drive, it will fail quickly and pressing F1 it seems so stuck on the loading screen. I'm not too good with computers. I just have to buy a new hard drive to get the laptop working again, or is much more complicated than that. My guess is this one.

  Thanks in advance for any help provided

  The first question is: did you create recovery media (USB key)?
  If do not do this if for a long time your HARD drive works OK. original recovery image is saved on the HARD drive, but you must have it USB backup that you can use to install if the disk needs to be replaced.
  Do it as soon as possible. More info on what you can read in s operating manuals.

  What to do with the HARD drive? In my opinion if long as it works it has no reason to panic. Use your laptop as usual. If you notice some performance or more error messages problems I think that you should replace it.

  Replacing the HARD drive doesn't have to be so problematic. HARD drive cover must be placed in the lower corner of your laptop. The smallest is RAM and cotyledon should be for the HARD drive. Check it out.

  Before do you that this is remove the battery and unplug your computer laptop AC adapter / CC.

  If you have no experience with such things please don't made some risky step. You can damage something.

• Satellite P200-1EE - Vista stuck on the homepage

  Hello

  * My Satellite P200-1EE is stuck on the progress bar Windows Vista since yesterday morning * and I'm unable to contact my office.

  I tried several solutions using the F8 key at startup.

  1 / safe mode

  2 / startup repair. "Windows cannot repair this computer automatically.

  3 / the system restore. "No restore point.

  4 / windows complete PC Restore. "No restore point.

  5 / Windows memory diagnostic tool. It is said that there is no problem of memory.

  So I am only left with the options of 'Restore the full Windows operating system' and the 'command prompt '.

  But I'm not too sure of the latter option. That's where I need your advice.

  * If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? * I have several years of family photos on another partition (D or E) that I would not lose enough.

  Obviously, * I do not lose data or software on C:, but not personal stuff D or E.*
  Could you advise me on the best option?

  Thank you

  Paul

  > If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? I have several years of family photos on another partition (D or E) that I would not lose enough.

  Depends on the disc that you would use if you want to use the Toshiba recovery disc, then the whole HARD disk would be formatted, including all partitions on the HARD drive.
  If you want to use the disk in Microsoft Windows Vista, you can choose which partition has been formatted and where the Vista must be installed.

  > Clearly, I do not lose data or software on C:, but not personal stuff on D or E.
  > Could you advise me on the best option?

  If you n t want to lose the data stored on the D partition and if you don t have a disc of Microsoft Vista, install the OS of Visa then I would recommend, remove the laptop HARD drive. Then plug the 2.5 SATA HDD with a USB-SATA controller then this HARD drive to another computer.
  Usually, you should be able to access the D partition and would be able to move all the data to another computer.

• iPad 9.7 Pro stuck on the startup screen.

  My iPad 9.7 Pro is stuck on the start screen. I can force restart it but it still gets stuck on the start screen. Does anyone else have this problem or resolution?

  Use the recovery mode as described here.  You may try to go into recovery mode more than once to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports