8 slate Pro audio problem: headphone output

Similar Questions

• Need instructions/tips for no Win8.1 on mid 2012 MBP pro audio problem

  Thank you for taking your time looking in my question.

  My Machine: Macbook Pro retina no Mid 2012

  What I wanted: install win 8.1 pro 64 bit on a second SSD completely (without Partition) / replace the optical drive

  My problem: everything works fine, but no sound. Drivers seem to be the cause:

  
  How I installed windows:

  1. I put the own ssd in the main Bay + optical drive with disk 8.1 win

  2. Windows disk initialized and installed windows 8.1 64-bit without errors

  3 install the drivers for bootcamp support

  4 returned the Mac ssd go back to the main Bay and put the ssd of windows in the caddy and then in the optical Bay

  5. starting is by holding alt and choosing between mac os, recovery and boot efi (which contains windows)

  What I tried (all of the following are ineffective):

  1 reinstall/repair drivers bootcamp support from different sources (of the download on the website of apple and the bootcamp assistant application)

  2 reinstall the realtek drivers

  3. how to install intel drivers graphics hd 4000 (found a source who said it would do the trick, there is no)

  4 uninstallation of controller high definition Audio (it always seems to come back)

  5. manually download and install the drivers http://www.stuffedcow.net/files/CS4207_WinVista_Win7_32-64-bit_6-6001-1-30.zip cirrus

  I get the following error:

  

  6. place the ssd of windows in the main Bay

  7 troubleshooting sound (a 99% sure that this would not work)

  8 throw up my hands in despair and uncontrollable crying afterwards (was probably the most effective on 8)

  That I need clarification on:

  I found found some sources say that installing windows via EFI mode causes no sound, but I'm not sure if the way I installed it is considered to be the efi mode as I have never had an option for efi mode. However when I start upward and hold option the name of the windows disk named ' BOOT EFI. Efi mode is how I installed windows?

  What I need instructions on:

  Some sources claim that I need to install windows in hybrid MBR mode however I do not know how I would install windows any differently than the way I did above. How can I go about installing, not in start efi mode, if I want to spend the whole ssd for windows / that I would do anything differently than the steps I listed up there?

  Thanks a lot again for your time and help!

  Windows must be in the main Bay and must stay in the main Bay after installation. You can either use the wizard of BC and create a USB installer which will also create a legacy BIOS/MBR W8.1 (default value for your specific model) or if you choose to do it manually, make sure that the icon of Windows from the installation media, not EFI Boot.

  If you start from the DVD W8.1, the default value is Boot EFI. BC Assistant did a bit of work for you, in order to avoid the is not a good idea.

• DV6-6145dx Windows 8 pro (audio problem Beats)

  Hello

  I own a HP pavilion DV6-6145dx laptop. I have recently upgraded to windows 8 proffesional and since then, I have problems with the audio beats. I can't turn on audio beats with "fn + B" shortcut. also the audio software beats crashes every time I try to change 'listen' experience. If anyone has a solution please help me.

  Thank you

  Nishchhal

  Hello

  Have you tried that?

  http://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57966.exe

  Kind regards.

• Satellite L850-147 - Audio problem with output jack and balance

  Hi all

  When I plug in my headset on my laptop (Satellite L850-147) and try to listen to music, I hear music (instrumental parts)... by far, I can hear the voice of the singer.

  I found a turnaround with the adjustment of balance in realtek HD audio manager 100% or 100% left...
  But this isn't the way that music have to play...

  I have reinstalled the Realtek HD Audio Manager but without success...
  Any idea?

  Thank you

  Hello

  And have you checked the settings in the software you use to play the sounds?
  Of course the Realtek HD audio Manager supports the sound configurations and you can change different sound effects such as environment and Equalizer but the same or similar options are supported by each software reading and I also recommend to check this!

  By the way: Toshiba laptops are pre-installed with a HD Audio SRS Premium application. To access this, go to:
  Start-> all programs-> SRS Lams-> SRS Premium Sound Technology
  Here, you will also get some options that could be interesting for you.

  Also recommend checking Audio improve
  Make a right click on the icon of speakers in the taskbar then on playback-> speakers devices->, click Properties
  On the development tab, select the sound effect you want and click on apply.

• Windows 7 Audio problem IDT plays through speakers and headphones

  I recently took possession of old Windows 7 Dell Inspiron N5040 my brother who runs the audio driver IDT HD Audio, the problem is that even when headphones are plugged in, the computer still plays sound on the speakers, I tried to uninstall and reinstall the driver, update the driver software and I still cannot fix. I thought that maybe the problem could be fixed with sound in the Control Panel, however, I can't find the device labeled "Headphones", only two devices listed are "Speakers/headphones" and "helmet of Communications." How can I do so that the system only plays sound through speakers when the headphone is not plugged and only plays the sound through the headphones when they are?

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to play music through the headset and it still plays sound to speakers.

  To better understand the issue, please send us the following information:

  1. This headset works with other computers?
  2. Have you tried to use other headphones? The problem persists?
  3. Are you facing this problem with a particular application or does with all applications of music?

  I suggest you follow the steps described in the article below and see if it works:

  Open the hardware and devices Troubleshooter

  Tips for solving common audio problems

  You can also check the suggestions provided by Aziz N December 13, 2011 and the Mike991 , February 12, 2012 in the article below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/sound-playing-through-Laptop-speakers-even-when/07289d2c-BF3B-4395-9c6f-dfe0c5151821

  Hope this helps, get back to us if you need further assistance for Windows.

• Adobe Premiere Pro CC - imported audio problems

  Hi, I ve had with audio problem. Tutorial I ve recorded (video)... It s mp4 audio and video in a clip. When I play in windows media player, its OK. But when I want to edit in Adobe Premiere Pro CC, audio is a few seconds behind the clip... And when I want to fix it and pull it forward, his lack at the start and bad at the end. I don't know what to do, please help!

  ---

  Jiri Pechar

  Is it a screenshot of your computer? And if so, the program captures the fact as a framer-variable rate (VFR) or constant rate (CFR)? Many screen capture programs are VFR, which PrPro doesn't work with. If this is the case, you will need to download a program like the freebie of the hand brake which allows you to transcode the footage to the CFR, then use in PrPro.

  Download page for handbrake:

  https://handbrake.fr/downloads.php

  Neil

• Output file WMV - Audio problem

  I'm new to Premiere Elements (9 v), but have produced a very good first DVD.  I wanted to also output as a wmv file.  It took forever for the rendering, but the output had audio problems.  A single audio track was fine, but if I had the narrative on a soundtrack, the soundtrack was not included.  If it was just a soundtrack or a single audio track in a clip, the sound was very good.  I have had no clip with narration or soundtrack on an audio track of the video and my story and audio tapes were all still image clips, but I have a feeling that this is not a problem.  My guess is that render to wmv just took a track audio with the priority being Audio 1, 2, etc., Narration and finally soundtrack.  Is there something that I need to specify to get more than 1 audio or y at - it a problem to v. 9?  Thank you

  Welcome to the forum.

  Just some thoughts:

  WMV is UC both decode and encode. Time is probably the way he is and could be depends on your computer. There are a LOT of current compression.

  Now, regarding Audio, there have been users who have had problems (not unlike yours, but not identical) with export, whereas they had Clips on the narrative and the tracks Audio Soundtrack sets. In many cases, simply move all these Clips to a regular Audio tracks, has cleared up many / most of the questions. It would be the first test that I run - just their lasso and move them to another free Audio track. Test.

  Good luck

  Hunt

• Headset audio problem Latitude E5530

  Hello
  I have a Latitude E5530, with Windows 7 64 bit.
  This laptop has been formatted in a couple of days and underwent a re-installation from scratch.
  I installed all the drivers that you can find on the Web site. The audio works well with the speakers, but you hear no sound if you plugin the helmet. I don't know if it worked before the format; I know that running a different operating system (Xubuntu 13.04 64.bit) everything works like a charm, no audio problem.

  Clues about what is happening here?

  Thank you!

  Browar00

  Is there an option on E5530 to change the audio output of the speakers/headphones to line-in?

  There is no line-in socket on the E5530. It has a simple audio plug, known as a helmet or jack combo. It combines the output of headphone and mono microphone input into a socket. It cannot be used for stereo plug-in software component line

  Even if you could change the audio output to the mic input jack (which is not possible that re-wiring of the plug), they are both the same plug. The only change that would achieve, is that the output would be mono instead of stereo.

• Audio problem when using an HDMI cable

  I have a 2000 HP and from time to time when I connect my comp. to cable HDMI the sound only works on the computer

  not the TV and then I have problems with the sound when you play videos on the computer alone or with headphones. I have also

  getting a Web page saying that something is null and then says error message line 1530 and I have to restart for

  Let the error message.  I checked all of the updates for audio.

  Thank you for visiting the Forums HP's Support and welcome. I have read your thread on your laptop HP 2000 and don't read does not correctly when it is attached to the TV. Only, you should be able to have the HDMI cable from the computer to your TV and try to touch the key FN and F4 for transferring the image of the computer to the TV while the HDMI cable is connected. Here's a document on solving audio problems with external speakers, headphone and HDMI audio devices.

  I hope this helps.

  Thank you

• Core Audio Crash, no output MOTU 10.2.1

  Since the upgrade to 10.2.1 I got in trouble with the logic to drop and then re - initialize CoreAudio. He would go from 48 to 42 KHz, sometimes when opening. It would work for a day or two, and then the problem reappears. Constant decline CoreAudio, no assigned MIDI channel. Various combinations of logic to quit and restart the logic or the MOTU 828 mkii FW would get things back.

  Sometimes when you restart logic, the default clock speed would increase from 48K to 44.1 K.

  Last night she is re - slept constantly CoreAudio.

  I decided to upgrade to El Capitan, and also has the new universal driver for MOTU (released February 11).

  Things start up. Audio project plays at the mac internal speakers. What MOTU interface is enabled. No sound. Led output on the interface LED some output for a period of time, but it is not audible. It's a high sound out of sound reach human ground. Then stops and then the project is not yet (and all counters are on all push them the audio tracks) no output sound or detected on the audio interface. There is a happening by clicking on, a little weak. It is the audio output only.

  MOTU AudiiDesk DAW download I installed and has recorded and played back a few audio tracks through the MOTU without problem.

  I think that this is a problem in 10.2.1. How can I report a bug to the development team?

  Anyone else having issues 10.2.1 or El Capitan and Yosemite, old Interfaces Audio?

  JP,

  Try a Reset of the MOTU, the sound output, & high freq rattling is a gift.

  Something to remember, whenever the operating system upgrade or logic, unplug the Firewire MOTU 828 cable before starting the upgrade process.

  828 mk2 reset:

  First, turn off the computer!

  Unplug the 828mkII firewire cable

  Press the configuration button

  Turn the button all the way to the right

  Press the selection button

  Press the button Value

  Turning off the interface and reconnect the firewire cable

  Back on the power interface

• Beats Audio problems

  Hi guys

  I have a HP Pavilion 17 laptop and I have problems with my audio the headphone jack. I recently updated my drivers realtek audio through the Wizard support yesterday as well as install a substantial windows 8.1 implemented to date (it was around 1.5 GB) since then my headphones won't work.

  I bought this laptop about 3 weeks ago, and usually Beats managed Audio jacks and everything with my audio now, it doesn't seem to load at all after the updates.

  Anyhelp on how to solve this problem would be great I'd like to resume listening to music in the office work without disturbing anyone.

  See you soon

  Marc

  Hi Marc,

  Try reinstalling the driver Realtek HD Audio original supplied with your laptop using Recovery Manager - how to use the Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - reinstalling the drivers - Windows 8.

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• HP Slate Pro 21 "sleep of death".

  HP Slate Pro 21 "sleep of death".

  When slate falls asleep, he is never able to wake up by press the power button, or the screen can answer, but immediately turn off the screen. Only way to relive again slate to remove power and the back of the power.

  There was another thread pointed out the similar problem, but 7 months without update/response from HP employee

  Finally, the upgrade solves the problem after 8 months, 'sleep to death.

• HP Probook 430 G2: Audio problem

  I got my new laptop (HP Probook 430 G2) barely 4 days ago and I already had a problem with it.

  I find this question every time, when I try to listen to music etc., headphones or 5.1 speakers (both using 3.5 mm jack).

  When I use Google Chrome or Windows MediaPlayer etc. If I stop to listen for 5 minutes (stop the video), then the audio "dumb"(barre de son dit qu'il n'y a son sort) but nothng can be heard. "." I solved this problem simply by setting the volume level 0 and back where it was in the first place.

  This problem came a bit annoying on a long term, so I hope someone can help me with this problem

  Thanks already

  Problemaster

  Thank you

  Your system uses the older driver

  Your driver page

  For the audio problem uninstall it please the driver Audio Realtek High definition (HD)

  Reset

  Install the new after reboot

  Driver Audio from Realtek High definition (HD) new

  FTP://g4u0180.Houston.HP.com/FTP4/pub/SoftPaq/sp72001-72500/sp72229.exe

  After the update install the new Bios (please disable the internetsecurity for installation of the Bios)

• HP Envy 23 - K030: Audio problems with HP envy 23-K030 and Windows 8.1

  I read all the discussions on audio problems with the IDT High Definition Audio Driver and Windows 8.1
  I get audio on my speakers ONLY and not the headset.
  I uninstalled rebooted and reinstalled the correct driver by this web site of HP support for my machine.
  no luck - same behavior.
  
  The only thing that worked was the IDT driver installation and Windows device driver high definition.
  The headphone jack are properly behaved and everything is ok worked.  However, I lose the audio Panel BEATS and the functions of the Board of Directors of IDT.   (superior quality sound-even with the built-in speakers).
  
  An interesting thing I noticed, when the Microsoft driver is used (and work) on the control panel for this device, it presents "the left panel making" when the configuration screen for the 'speakers '.  for the official driver of IDT, it shows 4 outlets - none of them say "left sidebar", there's rear panel and a plug of façade.    On the old driver that didn't work, he showed "right pane" and there is no control on the right panel.
  
  I think the pilot is simply wrong of this material. The driver is to look 10/2013-it is as if it were updated for this model ALL in ONE - only when it comes to use the headphone jack.
  
  Is there a better driver (I can't "find one beyond 6.10.6486.0 or 6.10.6491 - both had the same problem.)
  
  I do not use my time to often-rarely-last helmet I used them they have worked. Now, they are not - a few automatic updates upset the balance of the force.
  
  Any help would be appreciated. IF not - it is a problem that a person should study.
  

  Also it is reproducible. I have install generic Microsoft driver-headphone jack works and the sound Jack not pregnant, I re - install IDT player - his fate only speakers and not jack.

  I thought about it.

  BIOS V 80.09 (on this wonderful site to Support HP) - does all the work

  V80.05 - did not work properly with this Version of Bios.

  Thank you HP very useful site if you take the time to browse through all the updates.

• Audio problem in the laptop speakers. (Redirected)

  I have Dell Vostro 3546 Since a few days the laptop speakers do not work properly. They produced a sound of frying, but now the sound sucks. But when I attach headphones to the laptop but do not select the headset as device by default, the speakers work perfectly with any aberrations. The speakers work fine then. Please give solution to this.

  Thanks in advance.

  Hello. If you still experience audio problems, please post your question on the portable Audio Panel. Include the operating system you are using (i.e. Windows 10).