8 win having address IP & gateway, but not Internet access

Similar Questions

• Satellite L455-S5045 laptop Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access.

  PC laptop Toshiba Satellite L455-S5045, Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access. go to google.com and States page cannot be displayed, I ran diagnostics and reports, everything is configured properly. the wireless signal that d-Link has is 802.11n with a WiFi Code and running XP, I have WIN 7. Do I need to driver 802.11n, if I do, why I can not download it

  Hello

  To help you better, please answer these questions.

  1. don't you say no Internet access in the notification bar?

  2. what diagnosis you have to run?

  3 did you do changes on the computer before the show?

  To solve your problem, try the provided items.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link:

  Troubleshooting Wizard

  Reference (my computer can not connect to Internet)

  http://support.Toshiba.com/support/troubleshootSelfService?PRDTYPE=computers

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Equium P200 status 'connected' but not internet access.

  I have an Equium P200 and finds it difficult to connect to a wireless network.

  I have the wireless key and all the information is correct.
  Status is connected to the network, but I have no internet access and the message is: connection to the local network only.
  I live with two other people who have access, but I can't access the internet.

  How can I change this?
  Thank you.

  Hello

  Please check in the WLan settings if the TCP/IP protocol settings are set to automatic.

  Usually, the WLan router supports a range of IP addresses and assigns an IP address to the laptop of the range of IP addresses.

  You can find this setting here:
  ->-Connection network WLan-> properties > network connections (TCP/IP) Internet Protocol-> properties

  Also, check if your WLan encryption settings are right!

• I can't acess the ethernet. Adapter is not detected but not internet access.

  Hi, I have acer 5740 laptop. Last week, I tried to connect to ethernet, but there is no internet access

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  It will be useful.

• Connected to wifi but not internet access and the unidentified network

  I can't connect to internet, I need quick help.

  Hello

  This screen that you took the photo, there should be a small link somewhere that says "view log" you can copy the text of the log file and send it to me?

  In this photo, however, the only thing I see is Homegroup questions, which are not generally associated with internet connectivity... but who knows?

  You can try to manually start the Homegroup provider service. To do this, go to the search box of the start menu and type services.msc and press ENTER. Find the services marked "Homegroup Provider Service" and "Listener Homegroup" Double click on each one and set to automatic startup type. Restart your computer. Let me know how it goes.

  One more thing to try is to clear your cache of DNS resolution. At the beginning of the search box go menu, type cmd and press to enter. Type ipconfig/flushdns press on enter, and then restart your computer.

  I hope this helps!

  Mithrandir

• BlackBerry smartphones none given don't Plan - connected to wifi but not Internet access?

  Hi all!

  I am a new Blackberry owner.  I have a Blackberry Bold 9700, and I use AT & T.  I don't have a data plan, so I chose this phone so I can use the internet in Wi - Fi areas.  I am currently in a WiFi area, and my phone says I'm connected.  However, when I try to open the web browser, it says "cannot connect to the Internet, please try again later."  Is it a common problem with a quick fix?  Any help would be GREATLY appreciated!

  Thank you!

  emeraldeyes7 wrote:

  I did it because I thought that if data services have been activated, then I would be charged for them.  The phone knows use wi - fi when I'm connected to a wi - fi network and I do not load unless I have access to the web in 3G?

  With OS6, you cannot set the browser to be just a HotSpot browser. You can do within OS5.

  Well, IF you are connected to a WiFi hotspot, your device will use the browser and that's it, not much else. Some applications like Opera Mini and Pandora radio will work on a single WiFi.

• addressable PDF selected but not produced on 6600

  addressable PDF selected but not produced on 6600

  Thanks again for the help.  But I finally solved the problem myself by downloading a program called 'HPPSDr.exe' HP and running.  The searchable .pdf function now works very well on my HP Officejet 6600 device.

• Why do the topics become Chinese when I access my email via Firefox but not Internet Explorer?

  Why do the topics become Chinese when I access my email via Firefox but not Internet Explorer?

  Hello, this is a display caused the extension Advisor default McAfee site - please try to disable or remove that in case you have now until there's a mcafee update that may resolve the problem.

  http://service.McAfee.com/faqdocument.aspx?ID=TS100162
  https://community.McAfee.com/thread/76071

• WRTG54S to connect to the network, but not internet

  I have a WRTG54S and Mediacom 12mbps. My router worked fine on my old laptop (a Dell Vista), he was sitting in a box for about 6 months and now that I have a new (Sony running 7) I can connect to my network, but not internet. I have updated the firmware of 7.6 to 7.8 without change. I have tried no security, wep and wap without change. Also, I cloned the MAC, once again no change. Windows cannot detect all problems, and when I try to activate the router to connect to the internet it always says connection failed. I can connect directly connected to the modem but not when connected to the router or wireless. Any ideas? Thank you

  Problem solved. I had to go to a Motorola SurfBoard 4100 to a 5100. Thanks anyway

• T510 - wireless question - connects to the local network but no Internet access

  Hi all

  I have a laptop Lenovo T510 with Windows 7.

  Network adapter: Intel Centrino Advanced - N 6200 AGN with the version of the driver 13.2.0.30.

  I am facing problem seroius in wireless connection at home, I am able to connect wireless instead of office and friends.

  Wireless Networks are detected and I can connect to WiFi by the way of the key. And the status is indicated and is connected but no internet access.

  Please help me to get this resolved.

  Thank you

  Pavan K

  Thank you all for your support and your help... its working fine after re-starting the router

• Connected but no internet access (E1200 with laptop Acer Win 7 x 64)

  Whenever I come back from a stay in a motel, there are problems to be connected again to the House.  This time, I show that connected to the network wireless 2, but no. Internet access connection.  Yesterday, I figured it out and got things, but today it happened again and I don't get it.  See network properties properly, including appropriate security key.  When I ran Win 7 Network Diagnostics, he returned that I didn't have a valid IP address.  I have reset the router and even unplugged for a minute.  All this time, the ' currently logged on: "network in the sys bar icon showed the Summit he was trying to connect my network name to the internet (downstairs, the network showed as connected, probably by a router).  Another thing I did was to support IP services and disable and stop, then after restart it a few minutes.  Nothing.

  But wait!  As I finished typing the last sentence, about an hour after I started the laptop, the first time, I opened center network & sharing once more and suddenly between the name of my computer and the Internet has shown the name of the network, instead of "no internet access."

  So, what could be going on here?  (1) why should he take 50 minutes to make the connection?  (2) why do I have problems every time after the use of wireless network from a motel?  Thank you

  Update: resolved for now.  I started using the safe mode with networking, which required the implementation of msconfig as F8 does not work.  Which required a repair of the system, and then restore it, and finally I was able to follow the instructions at http://forums.techguy.org/networking/950031-cant-get-valid-ip-address.html.  Solved.

• IPad connects to the wifi but not internet

  I have a new iPad. It connects without problems to my wifi network at home, but when I try to connect to a network in a coffee shop, it shows that it is connected ok, gets an address IP etc, but when I try to use Safari I get a message that it is not connected to the Internet. This has happened in two branches of McDonald's when I tried to use their network. Once a portal connection captive flashed for a moment, but disappeared before I could connect.

  I tried to forget the network and reconnect, a restart of two buttons, reset the network settings, tried to use Google DNS, but none of them have worked for me. My iPhone works without problem on the same network

  Any suggestions on what I can try?

  Vinnie

  Try using another browser. In my experience, sometimes Safari have problems viewing a page ' agree to our conditions "on the hot spots. I have Atomic but there are others out there. Once you connect, Safari will not let you access the conditions page, use the other browser, which should, so you can use whatever one you want to continue browsing.

• WNDR3700 and Samsung TV: wifi but not Internet

  Hello

  I just bought a Samsung smart TV and is now trying to connect to the internet via wifi. The problem is that it connects to the router, but not to the internet.

  Other things that do not have an internet connection:
  -Cable Ethernet to the router works fine.
  -Wifi TV through my phone (connected to the internet with 4 G) works very well.
  -Wifi to my neighbor Asus router works fine.
  -When it is connected to my WiFi router, the TV responds to the ping.
  -All other devices connected to my router have access to internet.

  So, the problem seems to be with my router...

  Things I've tried but no luck:
  -Change the DNS on my TV in the local to OpenDns or Google.
  -Change the DNS on my router to the foregoing.
  -L' MAC address of the TV to give a static IP than automatic.
  -Double check that the TV using the same wifi encryption as my router.
  -The port forwarding 80 and 433 on television port.
  -Reset the TV in order to clear its DNS cache (got help from Samsung support to do this).

  Could I change in the router? It would be nice not to have to factory reset the router, since I'm not looking forward to start all my settings

  I don't think that you have a choice other than a reset to the default values.

  try to set up a network of comments without security to see if the work, then try the different security settings

• WRT320N cannot not get IP address - using only 1 - no internet access - wired port hang web configuration pages

  You just bought Linksys WRT320N as a replacement for Netgear MR814.

  Cannot connect to internet using Linksys WRT320N.

  Installation program:

  ISP: Cox Communications (cable)

  Firmware: v1.0.03 build 010 July 24, 2009

  1 Wired - port 1 - for Windows XP SP 3 Dell Desktop

  Attempts to install:

  1 tried to set up using the installation CD.  Spread the slightest error with error 302: internal error. tried this 3 times

  2A through the reset, power off, procedures.

  3 Ping 192.168.1.1 = success

  4. connected to 192.168.1.1 via web browser

  5. set the MAC Address = MAC address of the computer

  6. the MTU value = Auto (1500).  Also tried manual 1492

  Could not get the IP address by using the version of IP address and IP address renew.  Address Internet IP still = 0.0.0.0

  Note that the web page will be still stuck after perfoming some actions (such as after switching between the tabs).  Message at the bottom of the browser is "Wating for http://192.168.1.1/Status_Router.asp.  And the hourglass on the screen away.

  Note that the old Netgear router still works fine and I am currently connected to the internet via the Netgear router.   I'd appreciate any help getting the new Linksys router connection/operation/obtaining of internet and IP address.

  Thanks for your help.

  I do not know where I was unclear: you wrote before you used the function of the cloning mac address on the WRT to clone the MAC address of the PC. In this way the WRT "pretended" to be the PC if you connect to the internet port WRT to your modem.

  However, the PC is not the device you used before you connect to the internet. The PC was not the device that was connected to the modem before. If you connect the computer directly to your modem it will either be an IP address. There will be no internet.

  The problem is that your ISP only allows you to have an active internet connection single at some point. If you plug in a different device with a different MAC address to your modem this device won't get an IP address. That you have connected the Netgear router to your modem and you have internet, then you need to clone the MAC address of the Netgear router. This is the device that is connected to your internet connection and it is the MAC address that your ISP has locked your internet connection.

  So, once again: clone the MAC address of the router netgear (internet or WAN port MAC address) of your Linksys router. Then the Linksys's router Netgear and your ISP should accept the Linksys router. The netgear router should have a status page in the web interface, showing you the right MAC address to be cloned.

• Laptop connects to the network, but not Internet.

  I'm trying to fix a HP DV6000 laptop that can't connect to the Internet. It is running Vista Home Edition. It will connect to my LAN cable or wireless network, but not the Internet. I checked a few things and discovered that the TCP/IP protocol is missing. When I try to add using properties of LAN, TCP/IP is not an option.

  I did a complete system restore. System set!