802.11n aggregation mode WGB

Hello!

I noticed this message during startup when upgrading from JB AP 1262 to 15.2 (2) in the bridge of the workgroup mode:

"Disable 802.11n aggregation Repeater/GTC/NRB mode."

I hope someone can clarify why aggregation is disabled and whether or not it is specific to the IOS again. Thank you!

Well what I know is that Cisco would not support 802.11n for these types of connections and only really help customers. Now you can get the PTP bridges to connect to 802.11n, but this does not mean that Cisco supports. They may also removed the ability for these functions to support 802.11n. A few years back I have two 1252 close link and connect with N rates. Don't know if that still exists or not well.

Sent by Cisco Support technique iPhone App

Tags: Cisco Wireless

Similar Questions

  • MediaTek MT7630E 802.11bgn adapter Wi - Fi does not work in 802.11n mode (mode-N), only G-mode

    A few days ago, I got a new notebook HP ProBook 430 G1. OS: Windows 8.1

    They have Mediatek MT7630E 802.11bgn Wi - Fi adapter inside.

    Problem: I found this wireless adapter does not work in 802.11n mode (mode-N), but works well as in G-mode.

    Some modifications in the parameters of the driver on the Advanced tab are problem solved.

    I think it's a bug of material, or (less maybe) a bug in the driver.

    In other forums, I heard that HP can replace the card wireless, which works well. Is it not?

    You misunderstood me. I meant, of course, all channels from 1 to 13.

    I solved the problem by unistalling completely all the WiFi and software of the device with its drivers from Control Panel.

    Then downloaded latest drivers from site oficial Mediatek.

    In the Advanced tab of the new driver settings option appeared - "802.11n direct mode.

    After you enable this mode WiFi started working in mode N well.

  • WRT1900ACS: Missing "802.11n only' and '802. "11A / n only" network Mode selections

    On my new WRT1900ACS (ACv2, loaded with the latest firmware 1.0.0.169041) I want to force the two bands in 802.11n only, but I can not because the choice of "802.11n only" does not appear in the drop-down lists.

    The only choices that appear on the Wireless tab are 'mixed', '802. "11b / g only", "802. 11 g-only", "802. 11 b only for 2 .4GHz' and '802.11ac only', '802. 11 a only"for 5 GHz.  It's as if Linksys has decided to remove the 802.11n choice from the graphical interface at some point.  Why?  I want this option of return.

    The manual States that there is a choice for '802.11n only' for the two bands.

    From the manual (WRT1900ACS_FUG_ENandFR - CA.pdf):

    p. 41:

    "You can then select Wireless-N only as network below Mode."

    p. 43:

    i. on the 2.4 GHz band, you can choose among the following:

    -Mixed technique

    -802. 11 b / g only

    -802. 11 g only

    -802.11 b only

    -802.11 n only

    II. on the 5 GHz band, you can choose among the following:

    -Mixed technique

    -802. 11 a only

    -802.11ac only

    -802. 11A / n only

    Use WPA2 Personal instead of WPA2/WPA mixed personal

  • What would be the performance of these two 802.11n, router 802.11 g/b, when they are opereate under the mixed mode router with wireless 802.11n access point?

    ·         Range is increased to 802.11n device

    ·         Speed will increase for 802.11n device

    ·         Autonomy and performance will be increased by all the devices (802.11n, 802.11 g, 802 11b)

    Hi Sandeep,

    I suggest posting this question using the link below:

    Windows 7 IT PRO / networking

    calculation of the happy,

    B Eddie

  • Qosmio G50 802.11n enabled but does not work properly

    Hello

    I get a new Qosmio G50 on Christmas and now I have a little problem. I use a draft N of D-link access point and I want to use 802.11n mode with my qosmio. But I have some problems with it. I activated the 802.11n mode in the peripheral band Manager and channelbandwidth 2.4 & 5.2 are both set to "auto". But I don't get the 300mbps, 60mbps is what I get. My father has a portable computer from a different manufacture with also a 802.11n wireless card but not Intel and other mobile, I get the 300mbps! I put books together in the same room, the other get the qosmio 300mbps varies from 1 to 81mbps or more.

    -Does anyone know what goes wrong or what I need to change something in the Device Manager? I heard that many other intel WiFi 5100 owners also do not receive the speed of 300mbps.

    can someone help me?

    Greetz

    Have you tried turning off modes of 802.11g/b/a by assigning "802.11n only?

    Access device wireless LAN settings in Device Manager to change these settings.

    Remember not that 300Mpbs speed signal. Actual data transfer speed (less overhead) is less than 100 Mbps

  • Extending Airport Extreme 802.11ac with older Airport Extreme 802.11n

    I need to extend the coverage of my wifi and I have an a 802.11ac AE and two former, 802.11n AE units and all are still functional.  Specifically, can the newest Airport Extreme 802.11ac extended by an older Airport Extreme 802.11n if it is connected by ethernet cable?  If it can be done, what setting (bridge mode or extend the network mode) should be used on the 802.11ac model?  Any other need to know the tips would be greatly appreciated as well.  Thank you...

    can the newest Airport Extreme 802.11ac be extended by an older Airport Extreme 802.11n if it is connected by ethernet cable?

    Yes, it's can... goal that the wireless "ac" will not be extended, of course. Here, I assume you think 802.11ac airport your 'main' airport and airport 802.11n as the airport of their extension.

    which parameter (bridge mode or extend the network mode) should be used on the 802.11ac model?

    You would not change the settings on the 802.11ac airport

    Reset an 802.11n AirPort Extreme back to factory default settings

    Connect an Ethernet cable from one of the three ports on the airport of 802.11ac for WAN "O" from the airport on the AirPort Extreme 802.11n which extend the LAN network<-->

    Configuration to use Apple "Assistant" to put in place the AirPort Extreme 802.11n and it will feature the correct Assembly for you.  Everything you really need to do is assign a name that you want to call the airport and "Wizard" will take care of everything else.

  • Lenovo Y50-70 802.11n question

    I recently bought my Y50-70 new and I am very satisfied. I chose the FreeDOS version, as I already had a Windows Pro 8.1 license. I installed all the drivers on the Lenovo support Web page and everything seemed fine. However, I recently discovered that the Wi - Fi network adapter is missing support for wireless n mode. The model is Realtek RTL8723BE, which is clearly part of a WiFi n up to 150Mbps. In the options in the Device Manager, I have only the option b or b/g. I guess it's a driver problem.

    All the world is facing this issue before? I do not like, but I use my own NAS for file management, a fast and reliable network connection is very important for me.

    72.2 Mbps is 802.11n 802.11n is without doubt.

    For 150 Mbps, you must force the router to set the width of the channel at 40 MHz.

  • L530 with Centrino 6205 - 5 GHz 802.11n-compatible?

    I have L530 with Centrino Advanced - N 6205 built-in wireless. The computer does not see a network n I installation (2.4 GHz or 5 GHz). When I get the properties Advanced adapter centrino, mode 'Wireless' displays only the options of a/b/g and n not.

    6205 adapter is compatible with 802.11n? If so, how can I activate it? I have the latest drivers installed through Lenovo Thinkvantage tools app.

    Thank you.

    According to Intel, this is a map of "N" dual-band.

    See their recommendations on Setup here:

    http://www.Intel.com/support/wireless/sb/CS-030709.htm

    Two questions:

    (a) what type of encryption you have on the router?

    (b) are the other devices can connect with the router on the networks of "N"?

  • WRT1900AC. I can't find the 802.11ac network Mode option.

    I bought the router WRT1900AC last Thursday. I did the initial installation (manual mode). I use a Toshiba Chromebook 2 with a wireless adapter.

    But on the 5 Ghz wireless tab, I can't find the 802.11ac mode. I only have these options:

    • Mixed mode
    • 802. 11A / n only
    • 802.11n only
    • 802. 11 a only

    Where is 802.11ac? How to use it?

    My wireless settings are:

    Mixed or are A/D only the CA Protocol.

  • ENVY 4500: Unable to connect to my 802.11n network.

    I have an Apple airport base station, set at 2.4 GHz.

    When it is set to use "802.11n (802.» 11 b/g compatible)"the printer connects without a problem.

    Airport report it the connection as 'PHY b/g mode.

    But I prefer to use "802.11n only. When I do, the printer will not connect to the network.

    Network test results indicate parameters - no. filtering FAIL. but the airport has no MAC filtering.

    The Printer Setup Wizard indicates my 802.11n network only, but does not connect to it.

    The specification, the printer is 802.11 b/g/n.

    How to connect to 802.11n only

    I solved this by logging in to the Web interface of the printer via the USB port and change the interface 802.11, an advanced option.

    Uncheck the box "in use of 802.11 network infrastructure using the behavior of b/g.

  • Photosmart 7520 Wi - Fi 802.11n

    Hello

    I use my 7520 wireless without problems... as long as I left my Wi - Fi router work mode 802.11 g/n. Whenever I turn my router to 802.11n only the printer instantly disconnects (blue blink seeing Wi - Fi). Other wireless devices (desktop Windows - 8 / laptops, smartphones, Windows Phone 8, etc.) stay connected or reconnect directly. Try to re - configure settings of Wi - Fi printers also fails.

    My router is configured using 2.4 GHz dual-channel (9/13, 20/40 MHz). These settings work well if the router is configured as the 802.11 g/n. The printer's specifications indicate that 802.11n is supported. My router is an Arcadyan VGV7519 (aka KPN Experiabox V8).

    I'm doing something wrong?

    ---------------------------------------------------------------------
    L8r, Henk

    I think you have to let g active, sorry.

  • Configure 1141n with 802.11n

    Hello community,

    Currently, I'm trying to set up a 1141n (AIR-AP1141N-E-K9) autonomous access point with 802.11n. When I configure the access point for no encryption or aes - ccm encryption I am not able to set up the parameters of speed of dot11n (max. 54 Mbps). In addition, documentation (data sheet, conf IOS guide, getting started) said that the ap has two interface for (dot11radio0) 2.4 GHz and 5 GHz (dot11radio1) radio. I am not able to configure the interface dot11radio1. I tried to reset the access point to the default configuration, but this makes no difference. Even with default conf I can't configure dot11n. My question is: what am I doing wrong? Can someone help me?

    Concerning

    Bastian

    ---------------------------------------------------------------------------------------------------------------------

    Cisco IOS software, C1140 Software (C1140-K9W7-M), Version 12.4 (21a) JA1, RELEASE SOFTWARE (fc1)

    processor of Cisco AIR-AP1141N-E-K9 (PowerPC405ex) (revision B0) with K 98294/32
    768K bytes of memory.
    Card processor ID FCZ1419W0LN
    PowerPC405ex CPU at 586 Mhz, the 0x147E revision number
    Last reset of tension
    1 gigabit Ethernet interface
    1 802.11 post<---->

    ---------------------------------------------------------------------------------------------------------------------

    ---------------------------------------------------------------------------------------------------------------------
    !
    version 12.4
    no service button
    horodateurs service debug datetime msec
    Log service timestamps datetime msec
    encryption password service
    !
    hostname jug5128
    !
    enable secret 5<...>
    !
    AAA new-model
    !
    !
    AAA rad_mac radius server group
    ACCT-port of the server 10.1.111.33 auth-port 1812 1813
    !
    Group AAA authentication login default RADIUS
    AAA authentication login auth_mac group rad_mac
    Group AAA authorization exec default RADIUS
    !
    AAA - the id of the joint session
    IP zentral - .jug .de domain name
    !
    !
    dot11 syslog
    dot11 vlan-name ADMIN vlan 119
    dot11 vlan-name WLAN vlan 130
    !
    dot11 ssid junghans119
    VLAN 119
    open authentication
    authentication-key wpa version2 management
    WPA - psk ascii 7<...>
    !
    dot11 ssid junghans130
    VLAN 130
    open authentication
    authentication-key wpa version2 management
    WPA - psk ascii 7<...>
    !
    !
    Crypto pki trustpoint TP-self-signed-3181710497
    enrollment selfsigned
    name of the object cn = IOS - Self - signed - certificate - 3181710497
    revocation checking no
    rsakeypair TP-self-signed-3181710497
    !
    !
    TP-self-signed-3181710497 crypto pki certificate chain
    certificate self-signed 01
    <...>
    quit smoking
    !
    !
    Bridge IRB
    !
    !
    interface Dot11Radio0
    no ip address
    no ip route cache
    !
    encryption mode vlan 130 ciphers aes - ccm
    !
    encryption mode vlan 119 ciphers aes - ccm

    !
    SSID junghans119
    !
    SSID junghans130
    !
    gain of antenna 0
    Base-1 speed, 0 2.0 5.5 11.0 6.0 12.0 9.0 18.0 24.0 36.0 48.0 54.0 m0. M1. M2. M3. M4. M8. M9. M10. M11. M12. M13. M14. M15.
    root of station-role
    !
    interface Dot11Radio0.119
    119 native encapsulation dot1Q
    no ip route cache
    Bridge-Group 1
    Bridge-Group 1 block-unknown-source
    No source of bridge-Group 1-learning
    unicast bridge-Group 1-floods
    Bridge-Group 1 covering-disabled people
    !
    interface Dot11Radio0.130
    encapsulation dot1Q 130
    no ip route cache
    Bridge-Group 3
    the bridge-group subscriber-loop-control 3
    Bridge-Group 3 block-unknown-source
    No source of bridge-Group 3-learning
    No bridge Group 3 unicast-flooding
    Bridge-group spanning 3-people with disabilities
    !
    interface GigabitEthernet0
    no ip address
    no ip route cache
    automatic duplex
    automatic speed
    No keepalive
    !
    interface GigabitEthernet0.119
    119 native encapsulation dot1Q
    no ip route cache
    Bridge-Group 1
    No source of bridge-Group 1-learning
    Bridge-Group 1 covering-disabled people
    !
    interface GigabitEthernet0.130
    encapsulation dot1Q 130
    no ip route cache
    Bridge-Group 3
    No source of bridge-Group 3-learning
    Bridge-group spanning 3-people with disabilities
    !
    interface BVI1
    IP 10.1.119.92 255.255.255.0
    no ip route cache
    !
    default IP gateway - 10.1.119.1
    no ip address of the http server
    IP http secure server
    IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    radius of the IP source-interface BVI1
    test SNMP-Server RO community
    not run cdp
    local RADIUS server
    !
    format of server RADIUS attribute 32 include-in-access-req hour
    RADIUS-server host 10.1.111.33 auth-port 1812 acct-port 1813 hits 7<...>
    RADIUS vsa server send accounting
    1 channel ip bridge
    !
    !
    !
    Line con 0
    line vty 0 4
    !
    end

    ---------------------------------------------------------------------------------------------------------------------

    ---------------------------------------------------------------------------------------------------------------------

    jug5128 (config) #interface dot11Radio?
      <0-0>Number of Dot11Radio interface

    ---------------------------------------------------------------------------------------------------------------------

    According to the output you associate with MCS rates

    "Current rate: m15.

    You will not be able to achieve the full 300Mbps throughput until you enable the channel binding, but this is not recommended from the b/g networks because it would effectivly leaves you with only one channel of Alcan.

  • Window7 & RaLink 802.11n & problem of the Netgear WPN824v2 router wireless connection

    Kevin Hau recommends a new thread to solve individual problems.  It's here.  In February 2010, I bought a new LG X 130 notebook with Windows 7 starter pre-installed.  On the first day, connection Wi - Fi was intermittent, although wired connection works well.  Links for laptop to a Netgear WPN824 V2 router.  This router has a wired to my PC and wireless for Toshiba laptop of my wife.  These work perfectly.  The latter two works on Win 7 Home Premium.

    I put WEP as a security measure for the router and wireless connections.  The LG X 130 connect wirelessly from a cold start about 25% of the time.  When it is not connected, no problems.  It should be necessary to restart, otherwise the computer expires then all that I get is "no connection is available" and there is absolutely no way to reconnect.  Cold boot does not work and the computer seems to need to set off for several days before it will condescend to connect again.

    Internet gives hundreds of 'my solutions' research which none appear not to work.  All the drivers are up to date and the latest versions.  I tried without security, WPA, WPA2, as some people suggest that 802.11n does not support WEP.  I tried b & g 108Mbps mode rather than by car.  All of these more recent attempts have failed to get any connection. On a recent trip away, the laptop could find the hotel network, but not connect to it.  He made a useful paper weight!

    The problem is clearly intermittent.  The laptop was returned twice to LG.  For the first time, they reinstalled everything, got a connection and returned.  The second time, they got a call and returned.  I can get connections, but I can't keep or make it reliable.

    Grateful for a solution.

    everything indicates material ralink or driver at this point... here, I had a
    best answer.
     
    On Tuesday, May 11, 2010 13:51:30 + 0000, n1mccabe wrote:
     
    >
    >
    > I tried a USB NIC 802.11 b/g/n with WPA2 AES and so far it connects without any problems. Aaaaarrgh! I tried to roll back the driver without success.
    >
    > That you for your time and patience on this one. It is appreciated. Seen little faith, however, it may be appropriate to keep this current thread at least for a little while.
    >
    >
     

    Barb Bowman www.digitalmediaphile.com

  • SSID is not see on the pc (ap1142n, 802.11n).

    AP is AIR-AP1142N.

    SSID & RADIO 1 configuration is that...

    Enable ssid on the radio 0-> I see the ssid (but 72mbps..)

    but, close radio 0 after activate the radio 1-> I do not see the ssid

    802.11n configuration is open authentication or encryption wpa2 and aes on radio 1 (5 GHz)

    Help, please

    CONFIGURATION

    !

    dot11 ssid TestN2
    open authentication
    Comments-mode
    !

    interface Dot11Radio0
    no ip address
    no ip route cache
    Shutdown
    !
    !
    SSID TestN2
    !
    gain of antenna 0
    long guard interval
    channel 2412
    root of station-role
    Bridge-Group 1
    Bridge-group subscriber-loop-control 1
    Bridge-Group 1 block-unknown-source
    No source of bridge-Group 1-learning
    unicast bridge-Group 1-floods
    Bridge-Group 1 covering-disabled people
    end

    !

    interface Dot11Radio1
    no ip address
    no ip route cache
    !
    !
    SSID TestN2
    !
    no block of dfs
    width of the channel above 40
    channel 5745
    root of station-role
    Bridge-Group 1
    Bridge-group subscriber-loop-control 1
    Bridge-Group 1 block-unknown-source
    No source of bridge-Group 1-learning
    unicast bridge-Group 1-floods
    !

    brief AP #show ip interface
    Interface IP-Address OK? Method State Protocol
    BVI1 YES DHCP 192.168.1.108 upward upwards
    Dot11Radio0 unassigned YES NVRAM administratively down down
    Dot11Radio1 unassigned YES TFTP upward upwards
    GigabitEthernet0 unassigned YES NVRAM up up

    Sounds stupid, but are you sure that the customer's cell phone is capable of 5 GHz?

    Nicolas

  • x 220 Wifi 802.11n problem

    Hello, I have an 802.11n question that drives me crazy...

    My X 220 with 6205n Wifi adapter cannot connect to the router in N mode.

    The router is a huawei HG655b, using WPA2-PSK/AES. All my other computers at home can connect N, but the X 200 mode.

    It connects only in mode b and g, as soon as I N mode swith the 220 X of the card from the Device Manager, it disconnects.

    I updated the Wifi driver to the latest version of the Lenovo site, I changed power options on battery and Ac for maximum performance for Wifi... what else could be? An incompatibility with the router?

    Problem solved.

    Had to update the firmware of the router.

Maybe you are looking for

  • Re: Keyboard problem on my laptop satellite

    I have problems when I entered 3 e d and c he wrote 37 cm dj of the EU, it adds 7 votes against 3, you e, j m Saud d to c...The interesting thing is that all the symbols of this online (as------). What could be the problem and the solution?Thank you.

  • Connect my Mac and my new TV wireless

    I have a KDL-46EX710, and I would like to connect my Mac to my new TV (watch movies, photos and music listening). Is it possible to connect wirelessly? Thank you!

  • PXI-6527 digital i/o ports does not

    I couldn't get my two PXI-6527 work. In MAX, my devices are recognized, they pass the self test, and I can set high or low output on a specific port and a line on the PXI-6527 using the test Panel. When I take a measure to that line, say-5,7 to + 5.7

  • Orders admin locked out after you have reinstalled Windows XP

    HP Compac nc4200 Windows XP SP3 I just bought this off Ebay as does not - he was throwing an error starting victory. I erased the disc & re-formatted and installed WinXP SP3 without any problem.  However, when he started on a functional level, I find

  • How to erase a DVD of rewriting?

    I have been more money and all around this problem without success.  Help How to erase a cd/dvd?