80244019 MS VISTA UPDATE FAILURE?

Similar Questions

• Vista update failure #kb971029 & kb2267621 = e/m 80200010 / e/m 80246005

  I can't get on the internal net with these failures updating blocking me.  How to uninstall these to clear the blocks?

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         You are able to install some other updates?

  I suggest you follow the steps below:

  Method 1:

  Follow the steps described in the article:

  http://support.Microsoft.com/kb/958047

  Method 2:

  Download and install KB 971029 manually follow the link:

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=12314

  Method 3:

  If the previous step fails, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 4:

  If the previous step fails reset windows update component:

  http://support.Microsoft.com/kb/KB971058

  Also follow the procedure described in the link for Internet Explorer:

  http://support.Microsoft.com/kb/926449

• Help: Microsoft Windows vista update failure

  My pc was on and it automatically updating to vista, but its stuck on 90% and he won't do anything his jelly on configuring updates step 3 3 90%.

  even if I start in safe mode it still brings up Configuration page of updates, but it used all go further, it keeps reboooting back to the screen updates and goes no further, can I do this without losing all my work?

  on configuring updates messages I got repair window open I have done this it did nothing I also tried to repair that does not work, is any way around this and do-restore point?

  Thanks in advance

  Do you have the Startup Repair?

  That's part of what you had to do to try to try to repair your computer.

  Read my post for you.

  If startup repair does not work, there is not much you can do about it.

  If you have the good DVD of Vista (not DEll, HP), attempt an Inplace upgrade repair (BUT you need the appropriate Vista DVD to do)

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If none of the works above, backup your data and reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  Good luck with it.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista update failures

  I have a Lenovo SL400 with OS 32-bit Vista Business SP 2.  I'm more able to install windows updates.  It acts like its operation and then fails after updating.  I have stopped services, no change, I ran "fix"and there have been no changes. "  I tried updates intall one at a time and they have not as well. I made other fixes as well, and they have also failed.  Any help is greatly appreciated

  Hello

  I suggest you to refer to this article.

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Reinstall Windows 7 WARNING: Reinstall Windows 7 will remove all the programs you have installed and restore the default settings of Windows. You will need to restore your user files, and reinstall all the programs you've installed using the installation disk or the original files.

  I hope this helps.

• Of hard drive and installed new drive but Code failure not accepted. Original install was XP with Vista update.

  Of hard drive and installed new drive but Code failure not accepted.  Original install was XP with Vista update.  What do I need to install the xp before installing vista?

  How to activate Windows 7 or Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  Also:
  How to activate Windows Vista by phone
  http://support.Microsoft.com/kb/940315
  http://www.mydigitallife.info/2008/10/13/how-to-activate-Windows-Vista-by-phone-activation/

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• KB961501 failures of Vista update

  KB961501 and KB969897 for Windows Vista updates have been failing since 11/06/09.  I went through all the troubleshooting instructions and have failed.

  Hey Beck,
   
  Have you tried the steps above on your computer?
   
  You can try to download the stand alone, updates from the link below and save it to the desktop. Later, try to install in safe mode.
   
  KB961501
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3ad8f037-2434-4dea-BFC3-9d3b4008b828&displaylang=en
   
  KB969897
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e60215c3-B8B9-4E45-9D9F-b3fb0b47cce1&displaylang=en

  If you have already tried and still facing the same issue, answer back with the details:
  1. are you able to install some other updates on your computer?
  2. you receive an error message during the installation of the updates? If so, give us the exact error message.
  3 have you tried to download the updated stand-alone version and install it in safe mode?
   
  Hope it works.
   
  Kind regards
   
  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Vista update error endless loop

  I am running Vista SP1, Windows Update keeps trying to install important updates for Vista, but every time he tries, it fails and I get the following error message: "updates were not correctly configured. Returning from the changes.  Then it restarts and goes through him everything again and again and again!  Please help me to solve this problem as simply as possible.

  Here is what shows the history of the Update window:

  Update for Windows Defender - KB915597 (definition 1.49.2011.0) definition important success 1 / 17 / 2009

  Update for Windows Vista (KB956802) security is not Important 1 / 17 / 2009

  A security update for Internet Explorer 7 in Windows Vista (KB960714) is not Important 1 / 17 / 2009

  Update for Windows Vista (KB957388) has not Important 1 / 17 / 2009

  Update for Windows Vista (KB955839) has not Important 1 / 17 / 2009

  Update security for Windows Vista (KB958623) failure Important 1 / 17 / 2009

  Update for Windows Vista (KB958624) security is not Important 1 / 17 / 2009

  Update for Windows Vista (KB956802) security is not Important 1 / 15 / 2009

  A security update for Internet Explorer 7 in Windows Vista (KB960714) is not Important 1 / 15 / 2009

  Update for Windows Vista (KB957388) has not Important 1 / 15 / 2009

  Update for Windows Vista (KB955839) has not Important 1 / 15 / 2009

  Update security for Windows Vista (KB958623) failure Important 1 / 15 / 2009

  Update for Windows Vista (KB958624) security is not Important 1 / 15 / 2009

  Update for Windows Mail Junk E-mail Filter [January 2009] (KB905866) successful recommended 1 / 14 / 2009

  Update for the filter of junk e-mail in Outlook 2007 (KB959141) important success 1 / 14 / 2009

  Update security for Windows Vista (KB958687) important success 1 / 14 / 2009

  Windows malicious software removal tool - January 2009 (KB890830) important success 1 / 14 / 2009

  Update for Windows Defender - KB915597 (definition 1.49.1841.0) definition important success 1 / 14 / 2009

  Hi Amby,

  You can try to install the updates in Mode without failure.  To do this, please follow the instructions below.

  When the computer restarts, press F8 while it is starting up.
  In the Advanced Boot Menu of Options, select Mode safe mode with networking
  Once the computer starts in Mode safe, it will hopefully install the updates that you have problems with.  If this does not work, try the following steps to perform a system restore.

  1. Insert your Windows Vista installation disc in the disc drive and start your computer

  2. Press any key when the message "press any key to boot from the CD or DVD shows on the screen.

  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

  4. click on repair your computer.

  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  6. in the System Recovery Options dialog box, click System Restore.

  7. follow the System Restore Wizard and choose the appropriate restore point.

  8. click Finish to restore the system.

  Please let us know if you need more help, or have any other questions.  Thank you.

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows update failures after using recovery disks (error A 8024, 000)

  original title: Windows update failures as a result of the use of recovery disk

  I used a recovery disc following a replacement of HDD on my Acer laptop and now windows update will not work.  I get an error A 8024, 000.  I tried the MS fix - it tool, but gives an error when it tries to install as well.

  Hello

  I suggest you to disable any program of security on your computer and check if it solves the problem.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  It will be useful.

• Windows Vista update KB 2492386, 8007020 error Code

  Windows Vista update KB 2492386 attempted to install more than 75 times. The failure of this update to install disabled program Amazon Games & Software Downloader which I have been unable to repair or reinstall. Error code 80070020. I tried every fix I found on Microsoft, and I don't know what to do next.

  Problems with the installation of the updates Windows can occur when Windows Update and another program both try to access the same file. Although many programs may cause this problem to occur, the most common are antivirus programs and perform backups in real time of the file system.

  Try a clean boot, and then install the update.

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

• Vista update problem - stop to update 3/3 0%

  original title: Vista update problem

  When my computer tries to finally start up, it comes to a screen that says Windows Update section 3 of 3, 0% complete.  He is sitting here for a minute or two, then restarts.  This loop continues indefinitely.  Will not start in safe mode.  Used a boot disk to get into the Windows repair and got the result, did not find any problem.  How to cross this attempt to update?  I have Vista.

  When you used the "Startup disk" was available as an option system restore? If so, then choose a restore point created before this issue started occurring.

  If the system restore is not available, then you have 2 options:

  (1) try a "in-place upgrade", aka, repair installation. This can be done by running the system with the "Startup disk" and choose command prompt - How to perform a repair for Vista Installation

  However, if Service Packs have been installed then you should uninstall everything first.

  You will need to know where the Service Pack .exe file is to be able to uninstall the command prompt, because the system does not start properly, or Mode without failure.

  See - method 3: uninstall Windows Vista service pack from the guest here - How do I uninstall Windows Vista service packs as a troubleshooting step

  (2) do a clean install of Vista.

• Problem installation Vista updated and now the Vista operating system unbootable - help

  Here it is the description of what has past.  Ive been through everything I can do and am now stuck with a code of 0 X 4001100200001005.

  I worked with Microsoft Vista forum group of answers, but I'm not back upward and running if Im going back to HP for assistance.  I hope that we can achieve together.  This all started when started Vista updates failing.  I got the 1 3 install stuck on the 2nd about three weeks ago.

  Here is a list of what I've done so far
  I have an old HP DV9410us for a year which will not restart after installing updates.  It comes to configuring updates step 1 from 3 to about 98% and then stops.

  It then says unable to start windows and start the repair program windows for about 5-10 minutes.  He said that you want to use the system restore.  I tell Yah Why Not.  Then, it will stop and start the cycle.

  The error in the Startup Repair States the following

  After a bunch of tests successful

  Root cause found:

  c:\ntoskrnl.exe is corrupted.

  Repari Action: Repair of files
  Result: failed.  Error code = 0xa
  Duration 6521ms

  Action repair system restore
  Result: Completed successfully

  He then returns to the cycle all over again.

  I turned the clock to October with F10 at startup but that did nothing.

  I checked the hard drive for the short and complete and checked everything.

  I dug my recovery disks I did ago about 10 months after I bought and used to return to the top of my hardrive.  I was all ready for a MAC at this point.

  I went back to the HP Recovery program and tried to restore an earlier version of a well-known operating system.  The Manager of recovery disk wont work so I used the Recovery Manager disk.  There is no old configs to this true its in step 2.

  I'm now trying to perform a factory image recovery.
  Reload the operating system.  It started and got to 13% after 20 minutes and gave me the following error code.

  During this process, I have an error that had the code 0 x 4001100200001005.

  It is the reformatting of repeat of the Windows Partition.

  Is this a Vista update problem?  Have you seen this before?

  I'm doing a factory restore and will let you know if this operation fails.  I just wanted to get this thread started.

  I really appreciate this forum and any help you could give me.

  Message edited by ftrnow on 12/30/2008 08:17

  If you had an error in "configuration update 1 3-3 3 ' which would be a problem with windows update.

  to fix this, you'll need a factory image recovery if you can not access other modes for windows. But youy mentioned that you had a 0xx000x... (similar to code) error... try checking the hard drive and memory modules health... threr could be a problem with these devices, you can access it through the bios settings (turning on laptop, the moment you see hp invent screen, press f10) go to the diagnostics section, run the memory test and that hard drive test

  very probably with the error you have, you might have a hard drive problem.

  most of my clients (I am a specialist of the laptop of beak) with that problem and stuck on a boot loop or may not switch from windows, 95% of them had a hard drive failure.

• Satellite A110 - 180 PSABOE - Bios update failure

  Hello.

  I've updated the bios with an update from the center of toshiba, but the process is unresponsive and I had to restart the computer. The result is the laptop does not start because I think I lost the bios of programming. I test this http://laptopforums.toshiba.com/t5/General-Technology/Satellite-A215-S4747-Bios-update-failure/m-p method but the laptop will beep 3 times every 2 seconds without stopping and with black screen only. The CD-ROM unit tries to start but that's all.

  If anyone knows a separate solution that replace the motherboard, please tell me to probe it.

  Thanks for your help.

  > I've updated the bios with an update from the center of toshiba, but the process is unresponsive and I had to restart the computer. The result is the laptop doesn't start

  To me, it looks like the BIOS update procedure has no
  I'm afraid you have no other alternative besides contacting an ASP using m.

  It seems that the ROM module is not flashed on the correct order and the technician could try to relash Rom module with a BIOS version of crisis

  I would recommend contacting the local ASP in order to solve this problem

• Vista update and we now have a black wallpaper - Satellite P300

  Windows Vista update last night on our P300 laptop and is now rather weird.

  We get only a black background solid and a lot of the icons that we had are gone, and it will not change the wallpaper. Most of the programs are not loading at startup as usual (only anti virus) and most of the things are missing from the start menu... it happened to anyone before? It sounds almost to what they do when you have a pirate copy of Vista (and of course this one IS legitimate as it came with the lappy)...

  Any suggestings?

  I did not physically see the laptop and won't til tomorrow myself... Although my companion knowing its probably just something simple but thought check here around before that snack.

  Thanks :)

  Solved the problem...

  A windows update some how corrupted the registry.

  I hit log off in windows and then tried clicking on the user name to connect (we just auto journal in value) and when trying to load the profile, we had a service user profile Service has no logon.

  A system restore fixed the issue... :)

• Satellite P100-442 - sound after Vista update problem

  Vista Home Premium operating system.

  Since "Vista Update" installed a pilot of its new "Conexant high definition SmartAudio HD2", the sound does not work.
  It does that after I do a "ch for devices modified" via "Device Manager".
  But I do whenever I have start the laptop.
  Should I first remove this driver (and how?) and to install the driver on the Toshiba site?

  Try to restore to an earlier time using System Restore option.

  If everything works again DO NOT install updates for ALL pilot rating. Just install update marked as important. All others (optional) update SHOULD NOT be installed at all.

• Satellite A300 starts after Vista update

  Hello everyone!

  I had a problem with my Satellite A300. After installing Vista updates laptop is restart automatically, so it is not commissioning and screan is black, but buttons is the lighting, the cooler works.

  You have a solution to this problem?

  Hello

  Remove the battery, disconnect the adapter and wait for about 30 minutes.
  Then reconnect both parties and try to turn on the laptop.

  Check it out!