8024A 000 - Windows Update code does not work and "installing Windows could not configure Windows to run on a hardware on this computer" for Vista64 reinstall

Similar Questions

• Replacing hard drive, made restoration of the factory, get the message error "installing windows could not configure windows to run on a hardware on this computer."

  OS = Windows 7

  Computer = Gateway FX6840
  Media = gateway recovery media
  Hard drive is set to AHCI in BIOS

  I started meeting with S.M.A.R.T. errors.

  I backed up my data.

  I replaced 1 TB Seagate original with a new 2 hard drive to Seagate Barracuda SATA STBD2000101. Computer is equipped also is from the factory... no additional or modified facilities.

  I tried to restore Windows 7 from the rescue of the disks created with the "Gateway Recovery Management"

  Windows copying files over, the machine restarts, it installs the devices, then it stops at the "installation program starts services" and a window opens with the message "windows Setup could not configure windows to run on a hardware on this computer.

  I can't apply the Article ID: 2466753 because the process of restoration of the plant seems not provide an option to load a driver .

  Any help would be appreciated... Gateway is only interested to collect money.  They have no interest in serving the poor suckers who buy their products (computer is 2 years old so it is out of warranty).

  Thanks for the reply.

  Fortunately, I solved the problem myself (after 19 hours of stress).
  The problem is that the recent hard disk has something different that no longer ages and makes pre-service pack 1 (SP1 solves the problem) versions of Windows 7 incompatible. My set of recovery disks have been created the day I bought the computer, which had no windows updates installed at the time.

  There is an "easy solution" on the Microsoft support site: http://support.microsoft.com/kb/2466753/en-us

  Unfortunately, their method works only if you have a Windows 7 installation disc, which does most of the people who buy computers pre-built manufacturers. Essentially, the solution is to install SP1 from a disc when don't give you the possibility to load drivers during installation, an option that the gateway recovery disks.

  So I thought that, theoretically, if I use my recovery discs to get a clean install on a hard drive that works, then use windows update to get updated (or at least to get SP1), and then make a set of NEW recovery disks (using windows backup: start > all programs > maintenance > Backup and Restore), I should be able to use these discs to install the new hard disk.

  It worked.

  So for someone else who has this same problem with new hard disks, I hope that the above is easy to understand. If not, ask someone else more savvy and show them this thread. Do not forget that at the end to create new recovery disks, it will ask you if you also want to create a 'system' repair disc. DO THIS! This is the disk that you need to start from when you are ready to install.

  Also: If your new hard drive is bigger than the one that you have created the new recovery disks, the partition on your new hard drive (once everything is installed) will be the same size as the one that you have created the records on. You will need to use a kind of editor of score for re - size. I recommend Gnome Partition Editor. http://www.gparted.org

  Burn gparted Live CD and him, resize your partition, and you're done (google for more in-depth instructions).

  Thank you, theloungelizardK, for the offer on the ISO, but I don't need. :)

  Eastan - ITF

• Windows Setup could not configure windows to run on a hardware on this computer

  HP Pavilion Sleekbook 15-b023cl

  I tried to install Windows 7 on my computer for the last day and after several attempts the same error message. It is said: "Windows Setup could not configure windows to run on a hardware on this computer." How would I go about fixing this problem?

  Thank you

  Hello:

  I'm not sure that there is a 'one size fits all' answer to this problem, if you google the error.

  The most common solution is to try to install the SATA driver.

  Here is the link to the SATA drivers you need for your model. Download and extract to a usb flash drive.

  First file listed is for 64-bit operating systems.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=22194&ProdId=2101&lang=eng&OSVersion... =

  Use the Drive Options - Advanced method to install and then select the option load a driver.

  If you check the box, only the compatible SATA driver is selected.

  See if it works.

• "Installation of Windows could not configure windows to run on a hardware on this computer."

  I recently released and bought 4 hard to present itself as a raid 10 disks, now I use my motherboards onboard fakeraid an ihc10r. The cables are fine and when I try and install windows 7 (64 x pro) on each disk with raid and ahci disabled in the bios, windows installs fine. Now when I raid raid 10 disks windows install can see the drive and even then, I load the drivers just to be sure that iastor.sys etc. (I tried with and without) is the same every time after the first reboot, I get about 10 minutes and 2 minutes after the resolution of the screen is adjusted BOOM "installation of windows could not configure windows to run on a hardware on this computer."

  First of all, then someone please help me get windows installed on my raid?

  Second, microsoft, your error messages leave much to be desired, it does not yet add a message in the Setup error log.

  EDIT: Forgot to add that I did a memtest and it happened, I also have the piece of garbage jmicron on my MB off the power. In addition, the facility produces when the SATA controller is in AHCI mode, BUT not in raid mode.

  Seems to me that if the software/driver is not compatible Windows 7. Also if any of the readers have reminants of your installation for each individual unit, Windows 7 may not be able to deal with formatting during the installation process. Try to download CD bootable diagnostic of the manufacture in car and do two things.

  (1) check each drive individually for issues.

  (2) wipe the drive (WD can for example remove the first and last part of the training which completely removes the MBR and other reminants for the final result is the drive looks like you just removed from the box and plugged in for the first time.)

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• TouchSmart 600: windows Setup could not configure windows to run on a hardware on this computer

  I had a Touchsmart 600-1120 Windows 7, don't know if it's 32-bit or 64-bit. I had to replace the hard drive and I bought a Seagate st2000dx001-1ns164 model. After installing the new drive, I used the recovery disks, but when the pc reboots I get the following message: "windows could not setup configure windows to run on a hardware on this computer."  Are there new drivers I need to install and if so, where can I find the?

  Thank you.

  I suspect that the reason for the 2 TB drive vs the 750 GB drive that was there.  All of the recovery check the hardware on the PC which is used and rejects the hardware changes if it differs too.  I don't know a way around this limitation.  I suspect that a copy of Windows 7 retail install OK but then you have all the drivers, FOUND HERE.

  Another way would be to get a new 750 GB drive to replace the original failed drive.

• Windows could not set up to run on the hardware on this computer.

  After getting a new hardrive, I used the recovery disks. Once the three discs are finished, it goes to "Please wait while Windows continues to set up your computer" then a few minutes later it rises, "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. Is there a way to correct this error without lose more money?

  Hello:

  Try to make your own Vista installation disc and see if you can get Vista installed in this way.

  If you are in a fault light but rewarding, you can make your own Vista installation DVD so you can read your Vista on the PC 25-character product key.

  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  Paul

• Help to replace hard drives, when I tried to reinstall windows 7 Ultimate I get message that "Windows Setup could not configure Windows to run on a hardware on this computer.

  Nick Cannon

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• I want to ask how much the end of Installation of windows 7 take after some time, I received a message says "windows setup configure windows to run on a hardware on this computer." could not

  the computer is new and it was to win 7 top before I did the format

  Hello Baron Belal,

  Since your computer is new, contact the computer manufacturer to get the recovery disks. You can have a recovery on your computer partition to use instead of the discs. Look at your documentation or contact the manufacturer. It should still be under warranty.

  Let us know if you have any other questions.

  Marilyn

• update code does not

  Ok.. I have a job opportunities page, each job has a link next to what we call the "edit" when you click on the link it does this:
  
  < a href = "vacancyedit.cfm? ID = #ID #" >
  
  on vacancyedit.cfm, there is a form. the fields of the form are filled with this query:
  
  < cfquery name = "edit_vacancy" datasource = "allieddatabase" >
  SELECT *.
  OF new_vacancy_table1
  WHERE ID = #ID #.
  ORDER BY ID DESC
  < / cfquery >
  
  the form looks like this:
  
  < do action = "" < cfoutput > #CurrentPage # < / cfoutput > "method ="POST"name ="edit_vacancy_form">"
  
  ID Auto < label for = "textfield" > < / label >
  < Input value = "" < cfoutput > #edit_vacancy.ID # < / cfoutput > "type ="text"name = 'id' id 'id' = >"
  
  < label for 'label' = > zone < / label >
  < Input value = "" < cfoutput > #edit_vacancy.area # < / cfoutput > "type ="text"name ="textfield2"id ="label">"
  < label for = "label2" > template < / label >
  < Input value = "" < cfoutput > #edit_vacancy.pattern # < / cfoutput > "type ="text"name ="textfield3"id ="label2">"
  Hours of < label for = "label3" > < / label >
  < Input value = "" < cfoutput > #edit_vacancy.hrs # < / cfoutput > "type ="text"name ="textfield4"id ="label3">"
  < label for = 'label4' > rate < / label >
  < Input value = "" < cfoutput > #edit_vacancy.rate # < / cfoutput > "type ="text"name ="textfield5"id = 'label4' >"
  < label for = "textarea" > Description < / label >
  < name textarea = "textarea" class = "text_entry" > < #edit_vacancy.description # cfoutput > < / cfoutput > < / textarea >
  < br >
  < input type = "submit" name = "Submit" value = "Submit" id = 'submit_button' >
  < input type = "hidden" name = "MM_UpdateRecord" value = "edit_vacancy_form" >
  < / make >
  
  so I do the alterations of the queried data as requires it, then click on submit. This is the updated code:
  
  < cfset CurrentPage = GetFileFromPath (GetTemplatePath ()) >
  < cfif IsDefined "(FORM. MM_UpdateRecord") AND the FORM. MM_UpdateRecord EQ 'edit_vacancy_form' >
  < cfquery datasource = "allieddatabase" >
  UPDATE new_vacancy_table1
  SET field =
  < cfif IsDefined ("FORM.textfield2") AND #FORM.textfield2 # NEQ "" > "".
  < cfqueryparam value = "" #FORM.textfield2 # "cfsqltype ="cf_sql_clob"maxlength ="50">"
  < cfelse >
  ''
  < / cfif >
  model =.
  < cfif IsDefined ("FORM.textfield3") AND #FORM.textfield3 # NEQ "" > "".
  < cfqueryparam value = "" #FORM.textfield3 # "cfsqltype ="cf_sql_clob"maxlength ="50">"
  < cfelse >
  ''
  < / cfif >
  , h =
  < cfif IsDefined ("FORM.textfield4") AND #FORM.textfield4 # NEQ "" > "".
  < cfqueryparam value = "" #FORM.textfield4 # "cfsqltype ="cf_sql_clob"maxlength ="50">"
  < cfelse >
  ''
  < / cfif >
  rate =
  < cfif IsDefined ("FORM.textfield5") AND #FORM.textfield5 # NEQ "" > "".
  < cfqueryparam value = "" #FORM.textfield5 # "cfsqltype ="cf_sql_clob"maxlength ="50">"
  < cfelse >
  ''
  < / cfif >
  , "description" =.
  < cfif IsDefined ("FORM.textarea") AND #FORM.textarea # NEQ "" > "".
  < cfqueryparam value = "" #FORM.textarea # "cfsqltype ="cf_sql_clob">"
  < cfelse >
  ''
  < / cfif >
  WHERE ID = < cfqueryparam value = "" #FORM.id # "cfsqltype ="cf_sql_numeric">"
  < / cfquery >
  < cflocation url = "vacancyadmin.cfm" >
  < / cfif >
  
  This should then update my changes and take back me to vacancyadmin.cfm. but all I get is the following error message:
  
  Run database query error.
  Setting? _5 has no default value.
  
  The error occurred in F:\data\webdesigns\wwwroot\CFIDE\Allied\vacancyedit.cfm: line 35
  
  33: "
  34: < / cfif >
  35: WHERE ID = < cfqueryparam value = "" #FORM.id # "cfsqltype ="cf_sql_clob"maxlength ="10">"
  36: < / cfquery >
  37: < cflocation url = "vacancyadmin.cfm" >
  
  SQL UPDATE new_vacancy_table1 SET domain = (param 1), reason = (param 2), h = (param 3), rate = ","description"= (param 4) WHERE ID = (param 5).
  Allieddatabase DATA source
  3088 VENDORERRORCODE
  SQLSTATE
  Resources:
  
  * See the ColdFusion documentation to verify that you are using the correct syntax.
  * Search the Knowledge Base to find a solution to your problem.
  
  Browser Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.8.1.3) Gecko/20070309 Firefox/2.0.0.3
  Remote address 10.0.0.201
  Reference http://allied-srv-03/CFS/vacancyedit.cfm?ID=14
  Time April 7 07 12:56
  Stack trace
  at cfvacancyedit2ecfm242791332.runPage (F:\data\webdesigns\wwwroot\CFIDE\Allied\vacancyedit.c fm:35) at cfvacancyedit2ecfm242791332.runPage (F:\data\webdesigns\wwwroot\CFIDE\Allied\vacancyedit.c fm:35)
  
  com.inzoom.adojni.ComException: parameter? _5 has no default value. in the Microsoft JET Database Engine = 3088 code Type = 1
  at com.inzoom.ado.Command.jniExecute (Native Method)
  at com.inzoom.ado.Command.execute(Command.java:40)
  at com.inzoom.jdbcado.Statement.exec(Statement.java:34)
  at com.inzoom.jdbcado.PreparedStatement.execute(PreparedStatement.java:201)
  at coldfusion.server.j2ee.sql.JRunPreparedStatement.execute(JRunPreparedStatement.java:87)
  at coldfusion.sql.Executive.executeQuery(Executive.java:756)
  at coldfusion.sql.Executive.executeQuery(Executive.java:675)
  at coldfusion.sql.Executive.executeQuery(Executive.java:636)
  at coldfusion.sql.SqlImpl.execute(SqlImpl.java:236)
  at coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:500)
  at cfvacancyedit2ecfm242791332.runPage (F:\data\webdesigns\wwwroot\CFIDE\Allied\vacancyedit.c fm:35)
  at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
  at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349)
  at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
  at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:225)
  at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51)
  at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
  at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27)
  at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
  at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52)
  at coldfusion.filter.ClientScopePersistenceFilter.invoke (ClientScopePersistenceFilter.java:2 8)
  at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
  at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
  at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
  at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115)
  to coldfusion. CfmServlet.service (CfmServlet.java:107)
  at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
  at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
  at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
  at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
  at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
  at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
  to jrunx.scheduler.ThreadPool$ DownstreamMetrics.invokeRunnable (ThreadPool.java:318)
  to jrunx.scheduler.ThreadPool$ ThreadThrottle.invokeRunnable (ThreadPool.java:426)
  to jrunx.scheduler.ThreadPool$ UpstreamMetrics.invokeRunnable (ThreadPool.java:264)
  at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
  
  
  
  Sorry its that long post, but I thought that it better to publish all the news. You can see what the problem is with my code?
  
  Thanks in advance
  
  Zac
  

  I have not acually an action the code page is the top of form of update.
  It is clear. Where my cgi.script_namesuggestion.

  If I handed over the 'correct' code the whole thing stops working. Ive checked and
  checked all the code again. the only way it works is by excluding the #FORM. part.
  I do not want to believe that. We will give him a good ass head this time.

  Your recipe:
  (1) I have a job opportunities page, each job has a link next to what we call the 'edit '.
  When you click on the link it does this:

  (2) on vacancyedit.cfm, there is a form. the form fields are filled
  with the query [edit_vacancy]:

  (3) I have make changes for the queried data as requires it, then click on submit.

  Here again, your code with minor changes. I brought in the URL field and replaced the half dozen tags from cfouput in the form of a pair.

• iTunes does not recognize one of my devices. Option "Approve this computer" is not coming. Instead, "you allow this device to access...". "appears. What is going on?

  I don't know what is happening with my phone and my iPad. A week ago, I managed to sync and back up my devices in my laptop but somehow, now, it does not recognize. The option "Trust this computer" is not appearing the same. I almost tried everything / I restarted my computer and my device, reset the network settings, updated all the software simple, use as many USB cords and tried different every single port on my computer. Do you guys know what happens?

  This can help:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• error 80040154 - Windows update code does not

  Hello

  So annoyed! I hope someone can help. I tried many options and nothing seems to work to disable windows Defender to rename the temporary folder. I had no joy...

  Can someone shead light!

  Thank you very much

  Hi Beisilk,

  ·         When you get this error 80040154?

  ·         What do you mean by disable windows defender to rename the temporary folder?

  ·         Is - this windows vista or windows 7?

  ·         Is - this 32-bit or 64-bit windows?

  To disable Defender windows following the steps as shown below;

  Enable or disable the windows Defender

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  How to ask a question

  http://support.Microsoft.com/kb/555375

  Reply back with more information for you to help

• Windows 7 cannot complete installation, halfway, it stops and gives me the message "windows Setup could not configure windows for the hardware on this computer.

  Windows 7 cannot complete installation, halfway, it stops and gives me the message

  "windows Setup could not configure windows to run on a hardware on this computer.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Windows script host cannot be reached on this computer

  Windows script host cannot be realized on this computer, for further details, contact the system administrator

  (I used google trnslate for massage, there might be some difference between this and the ouanoufi one), (I am the administrator)

  This thing pops up evry 2 mins and its relly scared me to please you relly please I really need a solution!

  Original title: windows script host

  Hi Quti,

  Thanks for posting your question on the Forums of community of Microsoft.

  I appreciate your efforts to explain the matter in English.

  1. You did it of any significant changes to the computer before this problem?
  2. What anti-virus program is installed in your system?

  Windows Script Host (WSH) enables scripts to be run directly in Windows by double-clicking a script file or by typing the name of a script file at the command prompt. Such as Microsoft Internet Explorer, WSH is a controller of ActiveX script engines and the scripts are written in Microsoft Visual Basic Script.

  So, this could be the visual basic script that loads the background that is causing the problem. By starting the computer in selective startup with only necessary Microsoft services in operation, we can refine the question of which program is the cause. This process is known as a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• 'the settings saved on this computer for the network do not match the requirements of the network.

  original title: securtity settings in my computers. where should I go and see what are my security settings?

  the settings saved on this computer for the network do not match the requirements of the network.

  where should I go and see the settings?

  Hello Arturito1,

  Thanks for posting in the Microsoft Answers forum! For assistance with your question, I would recommend that you follow the steps provided by Srinivas R in the thread below:

  http://social.answers.Microsoft.com/forums/en/vistanetworking/thread/a82432f2-9312-480A-b2ea-720033c73387

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• window error code 8024A 000 8 updates

  After that windows update troubleshooting I have this error message get again and again the previous error has been 80073701

  Help me...

  Windows Update error 0x8024a000
  http://Windows.Microsoft.com/en-AU/Windows-8/Windows-Update-error-0x8024a000

  If you receive the Windows Update 0x8024a000 or 8024a 000 error when you use Windows Update, there is an automatic convenience store comes with Windows that might be able to solve this problem for you.

  To open the Windows Update troubleshooting tool

  • Open the Windows Update troubleshooting tool by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Under system and security, tap or click Fix problems with Windows Update.

  or

  See this thread

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/Windows-Update-error-code-8024a000/f783cd5d-b6b9-462e-983b-c25d09cde01d

  or

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_update/Windows-Update-error-code-8024a000will-not-update/031eadb9-8cb5-4AA5-9b9f-5ac2fa8dba97