8100 not dΘmarre

Hello

I have a 8100, but suddenly he is unbootable. My screen remains black.
Only when I start with F12, I get the message "Ready for bios update...» ». But when I insert a bios floppy disk (disk image downloaded from toshiba) he does not see the update. He's trying to get into the disc (1 second) but with results.

Until now, I had often to press to get the living screen?

Anyone know what's the problem?

Hello Raymond

Your ad a bit confusing for me. Have you tried to update BIOS before this problem occurred?

If you want to update BIOS please check this article http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=EU&from=faq_selection&CFID=BIOS&FI D = TRO0000000b07

Tags: Toshiba

Similar Questions

  • Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1)

    Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1) in order to prepare for Sierra

    I tried safe mode > disk utility, which took a lot of time and the disc seems to be OK.

    Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them.

    -What do you mean by? "Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them."?

    Did you delete anything?

    -The Mac can't you start mode (boot with the SHIFT key) safe?

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    https://support.Apple.com/en-us/HT201295

    Subject of memory NVRAM and PRAM

    https://support.Apple.com/en-us/HT204063

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    https://support.Apple.com/en-us/HT201262

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    https://support.Apple.com/en-us/HT201314

    -If it is repairable reinstall the OSX

    How to reinstall OS X on your Mac - Apple Support

    https://support.Apple.com/en-us/HT204904

    -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

    Format the boot disk and then do a fresh install of Mac OS x

  • Flash CC not dΘmarre after update

    Flash CC not dΘmarre after update. He said 'En zelfstudie training' (training and auto-stufy in Dutch) for the update.

    Everything worked fine before the update, now, if I try solo start Flash,.

    It is said: 'Flash works niet meer' (Flash has stopped working) and closes.

    As you can probably message, I am on Windows 7.

    Now here's something interesting: if I double click on a previous film, then Flash starts well and load the previous movie.

    However when I close it and the screen that should appear is the 'new film' dialogue, flash crashes again.

    So obviously something was not install the new update, or the update does not work properly.

    I'm working now with my pre version of flash5.5 cc, I have re-installed to avoid crashing flash whenever I close a file.

    My questions:

    1. where can I connect this problem? (Or am I in the right place?)

    2 can I re - install the previous version, what worked well? (I can live without tutorials etc.).

    3. can try to re - install this version if the above is not possible and how do I do this?

    What fixed the problem for me was just to reinstall Flash CC. I thought I would give it a try, because I couldn't find a message from someone having the same problem.

    So I used the control panel to uninstall Flash, then I tried to reinstall.

    Creative cloud kept saying that Flash is updated, so you can not reinstall. If you click on the gear and choose Exit and then restart creative cloud it will take a few seconds, but we will see the situation as it is and you can reinstall Flash.

    After the relocation, the problem was gone.

    Thanks for the other solutions, I think that it is a practical resource to help reduce Flash if I ever need

    and gives me more confidence in the creative product of cloud.

    Maybe Adobe will pick it up and make it easier for us "normal" users to creative-cloud of

    Choose the version we want. As you can do in CVS systems.

  • Tecra 8100 not start after replacing hinge!

    A few days ago and hinges on my Tecra 8100 receive broken - I had to take full-fledged laptop and replace the hinges. When I finished replacement and try to start, I have nothing on the screen. LED light diodes are to: power, battery, CD ROM (there are no leads to the HARD drive).
    I must put emphasis that I had the problem with the locations of memory (from last year) and I solved this problem by sticking a piece of paper between the contacts (like everyone else).

    Hello

    Who knows what you were doing. It seems at first glance that you plugged the screen isn't properly.
    But it could also be something wrong with the memory banks.

    It s not advisable to put anything between the memory and the housing contacts!
    If you use the compatible memory modules, everything should work properly!

    If you are not able to locate the failure I recommend to contact a technician who has more experience in the repair of laptop as a common user like you and me

  • 8100 not showing do not ImageItem under one form (MIDP)

    I have an application MIDP I'm trying to make it work with various Blackberry devices... in this moment, a 8100 & 9000.

    The 8100 is v4.2.1.66 (Platform 2.3.0.57).  I'm using Eclipse and JDE 4.5.0.

    Functionally, it runs very well on a 8100 and a 9000.  But on the 8100, the splashscreen at startup is displayed.  Technically, the splashscreen is a javax.microedition.lcdui.Form, and the code is essentially:

    form.append( new ImageItem( null,
        Image.createImage("/image.png"),
        ImageItem.LAYOUT_CENTER|ImageItem.LAYOUT_VCENTER|
            ImageItem.LAYOUT_VEXPAND|ImageItem.LAYOUT_EXPAND,
        "alt text" ) );
    

    I confirm there is no exception in this code.  But nothing appears on the screen (except the text of the title of the form).

    The same code works fine on the 9000.

    In addition, the same code works fine on the simulator of 8100 included as part of the JDE 4.5.0.

    Any suggestions why it wouldn't work on a real device?

    TIA,

    Richard

    To answer my own question... After more looking through the forum, I noticed the comments that you can use most recent d with older handsets of the firmware.  I was using JDE 4.5.0 with a v4.2.1 8100.

    After downloading JDE4.2.1 and regenerate the file COD, the splashscreen is now works great on the 8100, as well as the 9000.

    RIM, why phones can not check the version of the JDE when loading the application?  In this way, that this problem could be avoided!

    Richard

  • Tecra 8100 not start

    Hello

    correction of a problem, it seems that the second...

    After that I fixed my problems of inverter, the laptop worked well for more than a week. Last night I tried to turn on the machine and... nothing happened. The display is dark, the spins of HD, the (empty) CDROM gives three little noises, then silence. No JOB.

    If I power button once again for a little while, the portable thirty times (1 long and 29 short beeps) beeps. Then it turns off.

    If I'm held during the March, the screen displays a page of funny characters such as hearts and clubs and Spades, smilie faces and so on. I'm afraid, theres something wrong with my bios. Is there the chance to reset the FlashPROM? Perhaps by disconnecting the CMOS battery? But how do you here? Questions about questions. Someone at - it a good idea? The shaded for a visit a page ASP would be a death sentence for the machine :-(.

    Help, please!

    Thanks in advance.

    Kai

    Hello Kai

    As far as I know sound comes if there is serious hardware problem. On this path, it is not easy to give an accurate diagnosis. Remove the CMOS battery will not help at all. Personally, I think that there is serious hardware problem.

    You see the Toshiba start screen or these symbols appear immediately after pressing the Start button / stop?

  • HP officejet pro 8100 not review or color printing.

    My 8100 Officejet Pro won't recognize color when you try to print from my pictures in Windows 8.1. I've done all the checks... ok of ink, grayscale printing is turned off, blackonly is disabled, deleted the program and resarted from scratch with disc supplied. The computer brand new from Chillblast and is very fast and up-to-date. All inks are new and full.

    It will print documents, pdf, etc, but I can't 'see' colors in my pictures, all the previews and print out black and white.

    The only thing is that I don't know what, if any, changes may be required in the part "Color management" Settings Advanced... any advice... Thank you.

    I just checked the download site pilot official HP and wireddrivers.com site and noticed that the number of driver for my printer Officejet Pro 8100 has changed!

    It was OJ8100_1321.exe... It is now OJ8100_1321 - 1.exe.

    I downloaded this driver and all is well in my world printer!

    I don't know if that was my question on this forum or my contacts a Microsoft technician, (which was useless and kept asking me to do things that I refused to do what I explained that I had already tried), but in any case, someone realized there is a software problem in the pilot and fixed.

    I will now post this as resolved to help someone else who search... Regards Kevin.

  • CD/dvd not dΘmarre automatically after Windows update 10

    Hello!

    After the Windows 10 update of cd and dvd are not more recognized. There is no Autostart upward. Nothing happens when I enter a disk in my dvd-rw-station. That used to work well before windows 10. Install VLC MediaPlayer something does not work because the dvd / cd doesn't even start.

    Who knows a simple solution to this problem?

    Thank you very much!

    iTunes or DVD burning software may be causing the problem. uninstall / update this software.

  • Re: Satellite A210 - 1 c 0 - no display and not dΘmarre HARD disk

    Display Satellite A210 - 1C0 does not work. The HARD drive does not start. I believe that the BIOS is the problem.

    How reflash / recover BIOS without the use of a screen?

    Hi, MPP,

    Are you sure that the display is faulty? Wouldn t BIOS cause such a problem then there s no problem BIOS.

    I think you should test if the internal display is really defective. Simply connect an external monitor to your laptop and check the picture. If only the internal display is faulty, the laptop should boot properly and you can use it with an external monitor.

    Check this box!

  • Satellite L350 not dΘmarre but toshiba logo and windows icon appears

    My husband used his laptop (bought new about 13 months) yesterday without any problem at all, but when he tried to start it today, it would not.

    The toshiba logo appears, like the icon of the little window at the bottom of the screen, but then the screen goes black and nothing happens. Anyone know what could be the problem and how could this problem be solved?

    Nothing stranged happened at all, only windows made an update, and we bought a renewal for McAfee anti virus software it has downloaded... It would be great if someone would have a solution for us, because we currently reside in different countries at the moment and our laptops are basically our "lifeline"...

    The laptop came with windows vista on it btw.

    Try to start Notepad in SafeMode (F8 at startup) and attempt to restore the operating system to an earlier time using System Restore tool.

    You can start a computer laptop in safe mode?

  • HP 15-d030se. computer laptop 15:15 - computer d030se 15 hp laptop not dΘmarre at all.

    I stop my hp laptop the other night well. In the morning I started it upward by pressing the power button. He began, but took a loooong time to show the windows logo. So I decided to press the power button to shut it down again. After I did it, I pressed the power button to start, but what it does is: Wi Fi on f12 seeing three seconds then he going off like nothing happened. I tried to charge my cell phone with another charger. THE battery has no problem too. When I connect the charger it shows a light also it means that he is in charge. I tried hard resetting by removing the AC and the charger and the power button for a minute then run it with only AC power, but it did not work. I WENT a STEP Again and disconnected cmos sensor and left for 6 hours, but nothing has changed. I removed my hard drive and fixed it back and nothing has changed.
    My laptop still shows no signs of commissioning. I CAN'T EVEN THE CONFIGURATION OF THE BIOS.
    A week previously, it is difficult another problem: when I connected to a LAN cable, it has been restarted in an infinite loop. So I went down to window 10 to windows 8 business but the problem persisted. Then I intalled linux mint inside 8 windows and on linux startup, it does not restart on the LAN cable connection. After that, I've updated Windows 8.1 so that I could upgrade to Windows 10 which was running on. (when you do upgrades I remove the old windows, clean facilities using the disc).

    My laptop was so for two days. I have no other idea I can do. I worked on projects of computer science for this semester to this topic. I need on terribly. Note: when I press the power button, the wifi LED (f12) light comes on for 3 seconds then they leave and machine does nothing, no noise fan, not do anything, it's a year old laptop so I don't think it's a serious problem.

    Someone advice me please. What should I do?

    Hey @daggy,

    Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

    I understand that you are having problems with your HP 15-d030se laptop does not turn properly and I would like to help you as best I can.

    It seems to me that you are having problems with your BIOS settings, causing the computer unbootable.

    You can try to recover the BIOS to its original state, that can help in the startup process.

    To restore the computer, perform the following steps in this document:

    Please note, before trying these steps make sure you have removed all USB devices plugged in the laptop directly to a wall outletand be sure that you use good 65 W adapter for this laptop model.

    1. press the power button.

    2. when the seeing F12 button is orange, press on and hold the power button for 5 seconds until that LED turns off.

    3. press on the power button again. The computer turns on for about 15 seconds and then turns off.

    4. press on the power button again. The computer turns on normally.

    If after these steps isn't getting the computer back operational, please go through this documentand follow the steps to solve your problem.

    Try these steps and let me know how it goes by answering this thread so that we can move to the next edition.

    By pressing the Thumbs Up button below, you can always say thank you!

    See you soon.

  • I just bought my hp pc Pavilion g series, but many times not dΘmarre; the screen remains black or blue and must strive to market several times. What is going on?

    When I turn off my pc and that you want to turn it back on, it does not work and the screen remains black or blue, sometimes but nothing else and does not

    starts up, until I have try several times in pushing and disable the power button and suddenly starts working again. The pc is almost brand new (2 weeks)

    What is going on?  Thank you very much

    Hello

    I suggest you do the repair of the system startup and check if that helps resolve the issue.

    Check the link for more information on repair system below.

    Startup Repair

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

    You can also check the event viewer for more information on the error message.

    Open event viewer

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

    See also:

    Resolve stop (blue screen) errors
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  • E250 blue ring, not dΘmarre

    My e250 does not illuminate, the blue of the wheel remains on all the time. It does not connect to the computer, and tried what they said it would put in recovery mode (the hold switch, hold record while plugging into computer) but it is still not recognized. There rockbox on it.

    A v1 e200 does not start, with just light blue scroll ring, is a sign of a free memory card.  Remove the back cover and take a look at the large black rectangular surface above the battery module.  You will see a small gray foam rectangle in this box.  Give him a gentle pressure down; If all goes well, you'll feel a click soft like the daughter card snaps into position.

    Reassemble your sansa and try to turn on again.

    Bob

  • Laptop not dΘmarre - please help!

    Hello

    First of all sorry for my English

    I have a laptop DV6541ev and since yesterday it won't turn.

    When I press the button power lights light up for less than one second, and then the computer turns off.

    Turns on the power indicator when the power cord is connected to the laptop.

    I tried the hard reset, remove insert ram but nothing happened.

    Unfortunately, my battery is 'dead' for a long time and I can't check if I can turn it on only the battery.

    With the inserted battery the laptop powers for a little more and then the power led on the front of the pc flashes constantly, and which means insufficient power, cause my battery died.

    Also in the past, the power adapter lose contact with the laptop and I had to escape the cord until the contact is stable.

    Could be a motherboard problem or a problem with the Ac Dc Jack?

    Please help me

    Thanks in advance

    A pc technician checked my laptop... and he said that the motherboard is burned up/bad.

    I confirmed that too many others.

    I Don t go to replace it cause it s not worth the monay.

    I m going to buy a new laptop and sorry, it s not going to be an HP.

  • ODI 12 c not dΘmarre after the Linux kernel update

    Hi all

    Currently, I am having trouble starting my 12 c ODI after that I updated a bunch of kernel and rebooted the machine.

    The work formerly configuration was as follows:

    Linux oraclelinux6.localdomain 3.8.13 - 35.3.4.el6uek.x86_64 #2 SMP Wed Jul 30 00:59:13 PDT 2014 x86_64 x86_64 x86_64 GNU/Linux

    ODI Standalone Edition Version 12.1.3

    Build ODI_12.1.3.0.0_GENERIC_140617.0542

    Java (TM) Platform 1.7.0_67

    Then I updated the package kernel - uek.x86_64, the output of the command "yum update" was the following:

    sudo yum update kernel - uek.x86_64 - y
    Loaded modules: refresh-packagekit, security
    Implementation of the update process
    Resolution of dependencies
    --> Running transaction control
    -> Package kernel - uek.x86_64 0:3.8.13 - 44.1.1.el6uek will be installed
    --> Processing dependency: kernel-firmware = 3.8.13 - 44.1.1.el6uek for package: kernel-uek - 3.8.13 - 44.1.1.el6uek.x86_64
    --> Running transaction control
    -> Package kernel-uek - firmware.noarch 0:3.8.13 - 44.1.1.el6uek will be installed
    --> Resolution of dependencies finished
    --> Running transaction control
    -> Package kernel - uek.x86_64 0:2.6.39 - 400.17.1.el6uek will be deleted
    -> Package kernel-uek - firmware.noarch 0:2.6.39 - 400.17.1.el6uek will be deleted
    --> Resolution of dependencies finished


    Resolved dependencies

    ===========================================================================================================================
    Package Arch Version repository size
    ===========================================================================================================================
    Installation:
    kernel-uek x86_64 3.8.13 - 44.1.1.el6uek public_ol6_UEKR3_latest 41 M
    Disassembly:
    2.6.39 - 400.17.1.el6uek @ol6_UEK_base 101 M x86_64 kernel-uek
    kernel-uek-firmware noarch 2.6.39 - 400.17.1.el6uek @ol6_UEK_base 5.0 M
    Install the dependencies:
    kernel-uek-firmware noarch 3.8.13 - 44.1.1.el6uek public_ol6_UEKR3_latest 1.9 M

    Summary of the operation
    ===========================================================================================================================
    Install 2 package (s)
    Remove the 2 package (s)

    Download size: 43 M
    Download packages:
    (1/2): kernel-uek - 3.8.13 - 44.1.1.el6uek.x86_64.rpm |  41 MO 00:55
    (2/2): kernel-uek-firmware - 3.8.13 - 44.1.1.el6uek.noarch.rpm | 1.9 MB, 00:02
    ---------------------------------------------------------------------------------------------------------------------------
    Total                                                                                          761 kB/s |  43 MO 00:58
    Running rpm_check_debug
    Running Transaction test
    Successful Test transaction
    Transaction running
    Installation: kernel-uek-firmware - 3.8.13 - 44.1.1.el6uek.noarch 1/4
    Installation: kernel-uek - 3.8.13 - 44.1.1.el6uek.x86_64 2/4
    Cleaning: kernel-uek - 2.6.39 - 400.17.1.el6uek.x86_64 3/4
    Cleaning: kernel-uek-firmware - 2.6.39 - 400.17.1.el6uek.noarch 4/4
    Audit: kernel-uek-firmware - 3.8.13 - 44.1.1.el6uek.noarch 1/4
    Audit: kernel-uek - 3.8.13 - 44.1.1.el6uek.x86_64 2/4
    Audit: kernel-uek - 2.6.39 - 400.17.1.el6uek.x86_64 3/4
    Audit: kernel-uek-firmware - 2.6.39 - 400.17.1.el6uek.noarch 4/4


    Deleted:
    core - uek.x86_64 0:2.6.39 - 400.17.1.el6uek
    kernel-uek - firmware.noarch 0:2.6.39 - 400.17.1.el6uek

    Installed:
    core - uek.x86_64 0:3.8.13 - 44.1.1.el6uek

    Dependency installed:
    kernel-uek - firmware.noarch 0:3.8.13 - 44.1.1.el6uek

    Complete!

    The broken configuration after the update of the kernel is as follows:

    Linux oraclelinux6.localdomain 3.8.13 - 44.1.1.el6uek.x86_64 #2 SMP Wed Sep 10 06:10:25 CDT 2014 x86_64 x86_64 x86_64 GNU/Linux

    ODI Standalone Edition Version 12.1.3

    Build ODI_12.1.3.0.0_GENERIC_140617.0542

    Java (TM) Platform 1.7.0_67

    When you try to start ODI-Studio after the reboot of the machine, the following Java exception appears:

    Merge Oracle Data Integrator Studio 12 c
    Copyright (c) 1997, 2014, Oracle and/or its affiliates. All rights reserved.

    2014-10-08 15:24:15.025 NOTIFICATION installation area set to file:/oradisk/Oracle/Middleware/Oracle_Home/
    java.lang.RuntimeException: Exception in org.eclipse.osgi.framework.internal.core.SystemBundleActivator.start () of org.eclipse.osgi bundle.
    at org.eclipse.osgi.framework.internal.core.InternalSystemBundle.resume(InternalSystemBundle.java:233)
    at org.eclipse.osgi.framework.internal.core.Framework.launch(Framework.java:657)
    at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.internalInit(EquinoxLauncher.java:69)
    at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.init(EquinoxLauncher.java:37)
    at org.eclipse.osgi.launch.Equinox.init(Equinox.java:178)
    at org.netbeans.modules.netbinox.Netbinox.init(Netbinox.java:84)
    at org.netbeans.core.netigso.Netigso.prepare(Netigso.java:166)
    at org.netbeans.NetigsoHandle.turnOn(NetigsoHandle.java:127)
    at org.netbeans.ModuleManager.enable(ModuleManager.java:1176)
    at org.netbeans.ModuleManager.enable(ModuleManager.java:1011)
    at org.netbeans.core.startup.ModuleList.installNew (ModuleList.java:340)
    at org.netbeans.core.startup.ModuleList.trigger (ModuleList.java:276)
    at org.netbeans.core.startup.ModuleSystem.restore (ModuleSystem.java:301)
    at org.netbeans.core.startup.Main.getModuleSystem (Main.java:181)
    at org.netbeans.core.startup.Main.getModuleSystem (Main.java:150)
    at org.netbeans.core.startup.Main.start (Main.java:307)
    at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:123)
    at java.lang.Thread.run(Thread.java:745)
    Caused by: org.osgi.framework.BundleException: Exception in org.eclipse.osgi.framework.internal.core.SystemBundleActivator.start () of org.eclipse.osgi bundle.
    at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:734)
    at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:683)
    at org.eclipse.osgi.framework.internal.core.InternalSystemBundle.resume(InternalSystemBundle.java:225)
    ... more than 17
    Caused by: java.lang.NumberFormatException: for input string: "2.0."
    at java.lang.NumberFormatException.forInputString(NumberFormatException.java:65)
    at java.lang.Integer.parseInt(Integer.java:492)
    at java.lang.Integer.parseInt(Integer.java:527)
    at org.eclipse.osgi.internal.resolver.StateBuilder.createBundleDescription(StateBuilder.java:61)
    at org.eclipse.osgi.internal.resolver.StateObjectFactoryImpl.createBundleDescription(StateObjectFactoryImpl.java:33)
    at org.eclipse.osgi.internal.baseadaptor.BaseStorage.readStateData(BaseStorage.java:845)
    at org.eclipse.osgi.internal.baseadaptor.BaseStorage.getStateManager(BaseStorage.java:791)
    at org.eclipse.osgi.baseadaptor.BaseAdaptor.getPlatformAdmin(BaseAdaptor.java:380)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAdaptorHook.frameworkStart(EclipseAdaptorHook.java:90)
    at org.eclipse.osgi.baseadaptor.BaseAdaptor.frameworkStart(BaseAdaptor.java:253)
    at org.eclipse.osgi.framework.internal.core.SystemBundleActivator.start(SystemBundleActivator.java:60)
    to org.eclipse.osgi.framework.internal.core.BundleContextImpl$ 1.run(BundleContextImpl.java:711)
    at java.security.AccessController.doPrivileged (Native Method)
    at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:702)
    ... 19 more

    I already tried to reinstall ODI 12 c 12.1.3, but the error message is always the same. However, ODI-Studio run as superuser (known) does not work, even if the entire configuration is lost, for example repository connections.

    Sorry for the wall of text, I thought that some details could be useful. Someone at - it never have a similar problem? Is this a known issue? How can this problem be solved? I have found no information about it until now.

    Thanks in advance and greetings
    Thomas

    Remove the following the user-home directory:

    /. ODI/system12.1.3.0.0

    and try again.

    You will lose some preferences. But this shouuld not to be a problem.

Maybe you are looking for