8100 pro wireless installation with Linux computer

I use the Pro 8100 with a Linux computer via the USB port. Is there some way to make use of the connection of wirelsss printer so that I can print from an Android Tablet? The manual lists only methods for Windows and Mac.

Hey IanSinclair,

I see that you have an Officejet Pro 8100 and you want to connect to a wireless network without the help of the USB-wireless software that is available on Windows and Mac.  I have a guide that shows how to connect a USB-wireless printer without a PC.  Please click here to access this information.

Basically:

  • Turn it on off and then on the printer wireless
  • This will make the printer stream a configuration connection
  • Connect with the Android phone
  • Go to the SAP of the printer (192.168.223.1)
  • Select the network tab
  • Run the Wireless Setup Wizard in the built-in Web server to connect the printer to your wireless home network
  • After that, you can reconnect the Android device to your wireless network

If you need help with this problem let me know!

Jason

Tags: HP Printers

Similar Questions

  • How to connect the printer wireless hp with the computer?

    * - Original title - the printer printing

    How to connect the printer wireless hp with the computer?

    HP all what you need to be able to complete the task... See here...

    http://h71036.WWW7.HP.com/HHO/us/en/EP/articles/Wireless-Setup-Wizard.html

  • Satellite Pro L300 - installation of Linux RHES4 cannot find HARD drive

    Hello

    I have a Toshiba Satellite Pro L300 and it comes with preinstalled Vista, I loaded the XP due to the fact that I was going to see if I could load linux Redhat Enterprise 4 and dualboot both operating systems at the same time but discovered this "DOUBLE BOOT" means that you can have 2 operating systems but can only bott one or the other...

    Anyway, my problem is that I want to just install Redhat Enterprise 4 linux on my laptop, but when it comes to partition the hard drive I get an error message saying "cannot find the hard drive to create file systems" then click OK and restart.

    Any ideas people?

    Chris.

    Hello

    I m not a Linux expert, but I think that the reason is missing SATA drivers.
    Normally, on each notebook with SATA HDD, you need SATA drivers to recognize the HARD drive before installing OS.
    If you install Windows XP or Vista, you need storage for this Manager. The drivers can be loaded with an external floppy drive.
    But I put t know how it works on Linux

    An alternative you can change in the mode of AHCI Compatible HARD disk BIOS. Then, you don't need drivers and your disk should be recognized correctly.

    Otherwise, I recommend this thread: http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14

    Welcome them

  • interruption of the wireless connection with the computer laptop and printer

    We have a printer HP6500 we lost the connection Wireless to our Dell laptop.  Whenever we need to print to bring the laptop to the floor and connect it with a cable to print.  I tried to close the printer downstairs next to the laptop and the router but it would not print wireless.  Any other suggestions?  Thank you. CK

    Hello

    Check with HP, their drivers support and online documentation and ask in their forums on any
    known issues. As OEM HP is responsible for the good operation of the printer and provided them with
    drivers.

    More than one 6500 printer
    http://WWW8.HP.com/us/en/support-drivers.html

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    Try resetting the printer with the latest drivers.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Unable to connect a wireless printer with laptop computer since the reset wireless router

    I have a wireless HP C4580 printer that connects to my Acer Aspire laptop using windows 7. The two have worked together very well for months.  My wireless router stopped working a few days ago, so I had to unplug the device to make it work again is it.  But since then, I can't get my lap top to communicate with the printer now.
    I went all the problem of shooting and insured the printer is on line and set it as default printer. I even did a system restore, as suggested in the troubleshooting
    With the help of the program are the two messages that I get now troubleshooting
    1 that the C4500 series can be contacted via the network (this is the message that I had before the restoration also)
    2 the C4500 series is not shared with the homegroup

    All the tips are greatly appreciated in progressive simple language as possible as I am a bit useless with computers

    I assume that the printer is all first directly connected on the router, then the laptop?  Access the router and make sure that the printer is listed as a "wireless client" connection  If this isn't the case, you should probably restore the wireless "link" between the printer and the router then the printer should work.

  • How to secure wireless network with a computer running XP and one running Vista

    When I secure my network wireless on my desktop (XP) I can not connect to internet on my laptop which is running Vista.    I use "WPA Personal" as my security mode on my desktop.

    I've seen variations of this question, but not exact, so I'm still at a loss.

    Hello

    Follow the steps in this link-

    http://forums.Afterdawn.com/thread_view.cfm/678319

    If you have created a network profile, then delete it and create a new you follow these steps.

  • LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

    Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

    Hi @Kaiser3107,

    Welcome to the HP Support forum.

    I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

    Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

    Please let me know if that solves the problem, or if you need assistance.

    In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • HP Officejet Pro 8600 Premium: I have a printer HP 8600 pro works fine with my Windows 7 computer, but not with Windows 8.1

    I have a printer HP 8600 pro works great with my computer Windows 7 & computer laptop, but not with my laptop Windows 8.1. When I tried to print wireless (I didn't try connected), it would print only the first pages of 2 or 3 of everything I tried to print. I uninstalled the printer and inserted the CD to try to re - install and I got an error message indicating that the printer does not work with my operating system. I was able to install it earlier, but now, it will not install at all.

    Too bad. I'm sorry. I'm went to the HP Support Web site & downloaded a new driver & now it works!

  • HP Officejet Pro 8620: HP Officejet Pro 8620 - problem with wireless connection w/computer

    Hi all

    I recently bought the HP Officejet Pro 8620 and I have problems connecting with my computer.

    I used the Setup Wizard to connect the printer to the wireless network of my University, and when it's over, the blue light of connectivity remains a solid blue and the screen says it is connected, which is great. However, when I use the HP Officejet Pro 8620/software of connection instillation, I always get the message,

    "-L' the entered IP address is either incorrect, or it is another wireless network that has the same name as your network." Please ensure that your printer has this IP or enter the correct address below and click on search. Also, confirm that you wireless network is unique. »

    I did somehow on the printer IP address is copied 100% exactly the same with the points and the message still appears and my printer is unable to connect with my computer. As another option, it says that I can use the host name to find the printer as well. However, the same thing happens. I'll type in the name of host by number and letter by letter, and again, it does not find my printer. In addition, there is only 1 network name so I know I hit the right one. Being a student, it is very important that I get things printed off the coast, it is essential for me to solve this problem. Also, I spent a lot of money on it so I need to work properly.

    It should be easy to communicate that it gives me all the necessary information right in front of me, but as I said, it was not easy or fun experience. I don't really know how IP work addresses but I tried to use all the only thing that I can find that is relevant. From now on, I have to record everything in PDF format on my computer, send me unwanted, printing documents download them on my Galaxy Note 4, connect my phone to the printer using the wireless HP Direct on the Officejet and then finally I can print my things. Yes, it works like this, but it is also a concern and I shouldn't do that. I realize that I can't buy a USB link cable to connect my printer to my computer but I don't want to ride the 2 every time I want to print.

    (Also something to note, since I'm on WiFi from the University, I don't have access to the router of course so I don't know if this is a contributing factor in why things do not work).

    If anyone has suggestions/advice/answers on the issue, please let me know. Thank you!

    Hello @Plz_Help.

    Welcome to the Forums of HP's Support. I understand that you have a problem connecting to your computer and your printer via Wifi from the University. I would like to help.

    The only thing that really POPs, is that you use the network of universities. This can cause a lot of problems.

    Question: When you connect your computer or Note 4 on the network, should a pop-up saying you accept the terms of service? If so, this would prevent an air of challenge the printer properly connected to the network.

    If you had access to the router I would recommend checking the network connection by typing the printers IP address in a web browser. If you can access the printers webserver shipped, then, the connection is fine. If you can't you need to reset the router. Of course, you can do this.

    Also, here's something to consider: If the printer successfully on the network, everyone else on the network will have access to your printer.

    A USB connection will be the most reliable and safe way to go. Another thing, why send your rating 4 print jobs? Why not save the PDF files and connect the computer to the wireless network direct printers? In this way, you can print from your computer.

    Sorry I can't give you a solution ' to do this and it will work. You must convince the universities IT department to get things related.

  • Can my Officejet pro which is USB to my desktop Vista works wirelessly with my computer laptop windows 7?

    My office to Vista 64 - bit PC is currently USB would both my home wireless router and my Officejet Pro 8000 Wireless printer. I bought a new Win 7 Pro 64 bit with integrated WiFi laptop that connects wireless to my home router. How wireless connect the laptop to my Officejet 8000 wireless printer so that I can print wireless? What I have to buy a wireless adapter for my desktop computer so that both computers are wireless?

    Hi jimwachs,

    Please select the correct model from the list below and then download the software and the driver for your operating system.

    Series of printer HP Officejet Pro 8000 Enterprise - A811
    » Printer HP Officejet Pro 8000 Enterprise - A811a
    HP Officejet Pro 8000 Printer series - A809
    » HP Officejet Pro 8000 printer - A809a
    » HP Officejet Pro 8000 - A809n wireless printer
  • HP LaserJet Pro P1102w: HP LaserJet Pro P1102w Wireless Installation - adding other laptops and desktop PC...

    Hello

    I have a question about computers adding more to my HP printer.

    I followed the instructions & so I can print wireless from laptop, I used during the installation (after removing the USB cable).

    I can also print wireless from our various iPads & iPhones (after the change of the printer WiFi).

    But I don't see how I can 'Add' laptop (Windows Vista) daughter & my main desktop computers (Windows XP), so they can print wireless too!

    Does anyone know how to do this?

    I tried to launch the installation of the drive on my laptop HP printer girls. He was able to recognize the printer, but was unfortunately unable to print.

    For any help or suggestion would be appreciated.

    Thank you very much

    Simon B.

    Hi & thanks,

    I also found a solution to install my printer HP LaserJet Pro P1102w wireless & connecting then 2nd, 3rd & subsequent laptop/desktop computers.

    I initially reset the printer to remove any configuration, then I did the following:-

    Install on a laptop using a CD or could start simply by connecting the USB cable to the laptop. Follow the instructions, test the characters etc. (to prove that the wireless network is configured correctly)).

    Check printing wireless since this laptop computer 1 initial works, & also works various iPad/iPhone etc.

    Problems have been met when try to get other laptops/workstations to print wireless (2nd & later).

    The following seemed to work: -.

    On the other portable computers desktop (do not plug printer with USB cable): -.

    (1) the installation of the CD,

    (2) choose the series w1100 - Wireless install,

    (3) choose to install the printer software (& display the Guide of the user if want),

    4) click Add another printer (option 1).

    (5) choose HP LJ P1100w Pro Series.

    (6) choose option 3 (to connect to a network configured wireless (that established earlier),

    (7) following, a lot of software is installed,

    (8) identify the printer by choosing the method to identify it (select in a list),

    (9) side of firewall pinhole (all).

    (10) looking for printer, concludes HP LJ Pro P1102w,

    (11) then the TCP/IP data has been: -.
    IP 192.168.2.46
    Subnet 255.255.255.0
    Gateway 192.168.2.1

    Host Name NPI1C754F

    (12) (stupid 'password required' kept appearing several times - X box to close),

    (13) to enable direct printing,

    (14) then,

    Finally success!  A test prints to computers/idevices like many that I could find.

    Thank you very much. I hope the above can help someone else!

  • HP Officejet Pro 8100 - AirPrint - wireless

    My HP Officejet Pro 8100 worked very well with AirPrint, but then I changed my wireless router and I forgot how the printer was set up originally.

    I use the 8100 with my apple iPhone 4s, it is not connected to any computer and I don't know that it was never connected to any computer when I installed it initially.

    Question is: how put it all again from scratch? There is no "set up" screen on the printer, so how do we?

    I 'know' the printer must 'connect' to my wireless router, but how to do without a connected computer?

    My router is a Homehub4 of BT, and it works very well with my iPhone and ipad.

    Thanks in advance for the advice - I looked for info, but everything seems to indicate that needed a computer connected physically but I am sure that this was not originally the case - just turn on and AirPlay has worked!

    Maybe I need to uninstall "somehow" airplay on my iPhone?

    Help!

    No! I said that originally - no PC.

    BUT, BE, under the impetus for me to try again and this time, keeping my finger on the blue WiFi button and the power button at the SAME TIME and now it during (what seemed like an age) the connection has been made! Finally, I can print!

  • How to repair my disk external hard segate to synchronize with my macbook pro so its been already synchronized with another computer?

    My Macbook Pro has quickly filled its storage. I have a Segate external hard drive but it is was previously synchronized with another computer and won't let me sync for the Macbook. What I have to restart my hard drive external and everything what he let go? or can it work with my Macbook and keeps all the information on the external hard drive? Thanks for any help!

    A sync to a PC or another Mac? Have you used an installer for the external hard drive?

  • Just reinstalled Windows 7 as a dual boot with linux ubuntu 11.04, however, used windows recognize my wireless network card.

    just reinstalled windows 7 as a dual boot with linux ubuntu 11.04, however, used windows recognizes my wlan card and does not allow me to scan for networks, absolutely no networks are displayed under networks. Help, please?

    original title: no wireless network

    That's your problem.  You will need to determine which makes your wireless card, go to their website and download the latest driver for 64-bit Windows 7 32 0r according to your material.  If its inbult to your computer, visit vender of your computer (HP, Toshiba, etc) for the correct driver.

    Jerry

  • Adobe Acrobat 9 Pro that came with my Adobe Design Premium CS5 package is no more launches.  I did not any changes to my computer and I use Windows 7 Professional.  I tried to fix from my computer configuration panel.  I had a choice of modi

    Adobe Acrobat 9 Pro that came with my Adobe Design Premium CS5 package is no more launches.  I did not any changes to my computer and I use Windows 7 Professional.  I tried to fix and change of control panel of my computer and nothing was working.  Also, I tried to download the updates from Adobe by clicking on the update for Adobe Acrobat 9.5.5. The update seems to installs correctly, but the Adobe Acrobat 9 Pro cannot start.  I would like to know how to solve this problem.

    [Moved from the endorsement, general, all Adobe forums Lounge for a specific support by product - moderator forum]

    reset your preferences - https://forums.adobe.com/thread/1595848?start=0&tstart=0

Maybe you are looking for

  • Satellite C670 problems start after upgrade of Windows 10

    Hi all I made an upgrade of Windows 10 but after that my notebank satellite C670 has problems starting. It is always after the Windows updates were installed. It displays the logo of Win, followed of a blue screen. After several ignitions and extinct

  • Replacing a graphics card on Satellite P10

    I have a Satellite P10 554 for more than 2.5 years (warranty expired). But now the display start to Flash (sometimes some horizontal strips as refreshing disorders, sometimes turns completely black,...). Meanwhile, the laptop is frozen until the view

  • A new YouTube-Apple TV question that has not been requested here!

    A few years ago, I bought 2 apple TV.   One of them I gave to my daughter and her husband and I kept.   As everyone knows, who has more AppleTV, earlier, YouTube has been removed.   We found that it was because Google has changed the app so that it o

  • HP Pavilion dv6-3061ee: PC HP Pavilion dv6-3061ee power adapter

    I'm looking for the replacement of the power adapter and battery, does anyone know model number original of these parts. Unfortunately I lost both.

  • Help! Compaq MINI freezes while browsing Internet

    I bought a Compaq Mini Notebook compaq mini cq10-405dx on Black Friday and it performed well. Throughout the last 2 weeks whenever I'm browsing the screen freezes, and you must manually it restart to restart. If you press Ctrl Alt Delete it does not.