8200 elite format microtour, need of care technique for card mother/PSU

Similar Questions

• HP Elite 8100 sff: need support of recovery for HP Desktop

  I friend of mine has a desktop HP Elite 8100 SFF with processor i3 with 4 GB of ram was trying to upgrade to windows 7 pro or business pro (if there is a difference) 10 and all the process erased the hard disk windows and windows 10 has not completed the update/install.  There was a problem, but he's not sure what she was.  This attempt was several weeks ago.  After that it wouldn't boot obviously and beep (red light) 5 times in the models.  I think it is a ram problem.  Upgrading windows 10 will cause the ram to go wrong, because he could not bear?  There is also no recovery media for the operating system.  They always make it for this pc?  Thanks in advance.

  jehrock08

  Hello:

  Windows may not cause the memory to go wrong.

  The first thing to do for this problem would be to remove and reconnect firmly all memory modules.

  If this fails to solve the problem, remove all modules but one and test each one individually in the black slot nearest the processor.  One causing the PC to 5 beeps is bad and must be replaced.

  If this fails to solve the problem, most likely the system board is bad because it is doubtful that all modules of memory could be faulty.

  If you live in the USA/Canada, call HP at this number of order recovery media.  Have the serial number of the PC handy to give to the customer service rep.

  1-800-334-5144

• HP Pavilion Elite e9280t PC: need a fan spec for HP Pavilion Elite

  Hello.

  I have a copuple HP Pavilion Elite PCs (round box) e9280t I buy several years ago. Now refresh their place with new hard disks.  While I am, thought I would replace the old dusty case fans (I understand the fans can go wrong, after many years, just like hard drives).

  Did anyone here know how I can get the exact specifications for these fans, so I know what to buy when I'm shopping.

  Thank you.

  @fridaythemovie, welcome to the forum.

  The best way to determine that fans have been used since the computer is older is to measure.  Also, if you delete a computer, you can find the CFM.  You can check with the vendor to see if they have available to them.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Need drivers for card mother Satellite A100

  Invite please!

  Where I can download the driver for the motherboard and USB 2.0 or send e-mail: [email protected]

  For East thanked earlier

  Hello

  There are several different models of laptops Satellite A100 and it can be useful if you can tell us what Satellite A100 you exactly (A100-xxx, PAxxx).

  BTW: Please check http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• HP Compaq 8200 Elite SFF: MSI 770 2 GB graphics Nvidia GTX compatible with HP Compaq 8200 Elite SFF?

  Hello

  I recently bought a HP Compaq 8200 Elite SFF and want to update the graphics card. My friend has a MSI Nvidia GTX 770 2 GB graphics card in sales and I was wondering if it would be compatible with my PC. I said I'll need to upgrade to the power. Will it be possible? If the graphics card of my friend is not compatible with my PC, what is the best graphics card (ideally a similar to the MSI Nvidia GTX 770 specs/price range) which will be compatible?

  Any advice would be much appreciated.

  Thank you

  John, welcome to the forum.

  I think that you will get more answers to your questions if you start a thread here.  The members who know your best computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Compaq 8200 Elite - XL510AV: need help to find the form factor small PCI Ethernet card

  Hi guys, I hope one of you can help me with this. I need a card PCI Ethernet single port for a HP Compaq 8200 Elite Small Form Factor computer.

  From what I see, the motherboard has a PCIe and two PCI card slots.

  Computer model is XL510AV

  Any help is appreciated.

  Hello

  The following can help:

  http://www.StarTech.com/au/networking-IO/adapter-cards/10100-1000-Mbps-32-bit-PCI-Gigabit-Ethernet-card~ST1000BT32

  It has 2 brackets for standard and one for the low profile, you can swap around.

  Kind regards.

• PC HP Compaq 8200 Elite MT: KERNEL_SECURITY_CHECK_FAILURE: a rider needs to install the Device Manager

  PC HP Compaq 8200 Elite MT

  Product #: XY139EA #AB7

  KERNEL_SECURITY_CHECK_FAILURE I got 7 times that screen and necessary stop PC lose my job...

  in detail, I got: / / restarts not necessary reboot manually - it's 7 times different, what to do... I clean some viruses and update PC 1st and 2nd hour, but's still 3 times.

  The PC has encountered a problem and needs to restart.
  We are only collecting some information in error, then we ' he's restarted for you. ( ! 00 %).
  KERNEL_SECURITY_CHECK_FAILURE

  In the device manager driver must also install... what to do? what the cause of the problem...?

  A default OS Win 7 Pro 64-bit--> improved new facility at--> Win 8.1 Pro 64-bit

  

  Hello:

  I can't help you with the error, but here is the link for the driver for PCI serial port, you must...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037951&swItemId=vc_138955_1&swEnvOid=4059

  I have also a 8200 Elite CMT and it works W8.1 Pro x 64 and even the new W10 preview with no problems whatsoever.

• HP Compac 8200 Elite: Lack of communication Simple PCI driver Code 28

  Problem is I reinstalled Win 7 Pro 64-bit and that you have installed the most all the drivers and it seems to work well, with the exception of the Windows and update in device under the other controller of communication manager simple PCI devices miss a Code 28 driver, I read that I have perhaps need the hardware ID to get a driver so here it's PCI VEN_8086 & DEV_1C3A & SUBSYS_1495103C & REV_04

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_1495103C

  PCI\VEN_8086 & DEV_1C3A & CC_078000

  PCI\VEN_8086 & DEV_1C3A & CC_0780

  Thank you

  Pat

  Hello:

  You need the driver for this device...

  This package contains the driver Intel Active Management Technology (AMT) for the supported models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69506.exe

  I have two 8200 Elite CMT is then I know this is the driver you need...

• PC HP Compaq 8200 Elite MT: Should I roll back before flashing the BIOS?

  Hello, I am trying to determine if the update of the BIOS shown on your website is right for my machine: HP Compaq 8200 Elite MT PC. After selecting 'Let HP find my products,' he identified my machine and sent me to a page that asked me to 'Select language driver and OS' two squares. I selected my language, then going on to the next box that asked me to choose my operating system. However, it does include all the Windows 10 selections. I used to have initially Windows 7 Professional. However, I've recently upgraded to Windows Professional 10. Is it safe select the operating system Windows 7 Professional, even if I is no longer on the machine? You see, I want to update BIOS, because I'm having trouble starting after I install memory upgrades, and the provider of the RAM is recommended to upgrade to the latest version of BIOS upgrade before installing the upgrade of RAM, to eliminate these problems. I don't want to make a mistake, and then select the wrong BIOS update. There is an update of the BIOS on HP.com for my MoBo machine, but only for Windows 7 Pro. So should I go back to 7 Pro, before the update?  Please, inform me as to what I should do.

  Hello:

  I just got the flash drive, I use to update BIOS on my HP business desktop PC.

  I plugged in my dc7800 CMT W10 also running.

  The window on the flash drive, and I closed it.

  Then I went on the desktop, click on this PC, click with the right button on the flash drive, which is drive E:\ in my case.

  Then I chose the Format from the menu, and a box will open.

  In the file system drop-down list that I get on my USB flash drive, I get the following options:

  FAT (by default) which is what you want to use.

  NTFS

  FAT32

  exFAT

  So if you don't see these options, try another flash drive.

• PC HP Compaq 8200 Elite CMT: Replacement of the SSD HARD drive and Recovery Options

  I have a PC HP Compaq 8200 Elite CMT I went recently to drive HARD original for one SSD of 850 Evo from Samsung using Samsungs cloning/copying software. Everything went well and the PC is in use today. I do not see the partition D: Recovery on this machine more well, so I think this has not copied or was lost. I still have the disk that was replaced.

  I was wondering if there is a way to replace HARD drive like this with an SSD and everything by keeping the system recovery feature that was on the HARD disk, and if a set of system recovery disks of before installing SSD would continue to operate, or if I need to create new ones, and if I CAN create new ones.

  rgoodrich

  I did what you want to do (for example, to replace a disk with a DDI) and was able to retain the function of HP recovery - but it's because of two important facts.

  First of all, I used a DDI with the same capacity as the original HARD disk.  This is important because if you use a smaller SDS, the HP recovery feature will no more work as a reset begins with reformatting the drive and recreate the original scores - which will fail if the disc is too small.

  Second, I use Macrium Reflect product to 'clone' the HDD to the DDI, which means, he made an exact copy of the partitions on disk on the SDS.  So, when I swapped drives, the PC restarted without any problem.

  People have posted here on the use of the software from Samsung, and they seem to have problems restarting after use and (apparently) with successful copy from disk HARD original in the new SDS.

• HP Compaq dx2300 format microtour CPU Upgrade requires the bios update

  Hey, my Hp compaq dx2300 format microtour came with a core2duo E4400 processor, I had an E8400 CPU because they share the same socket LGA compatible on the motherboard and it fits perfectly, only the pc does not start, then read around some sites say it is supported by my MSI motherboard A 0, 90, others only reported up to E6700 what I don't understand, is why it wouldn't work? I BIOS v1.14 (latest news on the list of dated drivers '2008'!) and can't seem to find a solution for this, please tell me what to do I don't want to be stuck with a CPU, I can't use cause it isn't a way to map mother read it, thanks in advance!

  Hello:

  Unfortunately, you're stuck with an E8400 which won't work in this PC.  See page 4.

  Here are links to the quickspecs for your model.

  http://h18000.www1.HP.com/products/QuickSpecs/12668_na/12668_na.PDF

  An E8400 processor will not work in any case with x chipset Intel 94 or 96 x chipset.

  In order to run an E8400 into a PC, there need an Intel 3 series chipset or 4 of the series.

  Of course a processor must adapt to an outlet, but is not the only criterion needed to make it work.

• HP Compaq dx2000 format Microtour - upgrading graphic support dual monitor?

  Hi, I have a question about the HP Compaq dx2000 format Microtour. The link to the form is here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&ContentType=support...

  I was asked to provide a solution for this machine that will support dual monitor. Can someone tell me please on a possible graphics card I buy (probably second-hand) that will be compatible with the motherboard on this machine and will also support dual monitor?

  Thank you very much!

  Paul

  Hello:

  If you only run XP and don't have no plan to upgrade to Windows Vista or Windows 7 and just VGA (not DVI) output, this PCI video card should work for you, and your machine has only PCI slots.

  http://www.eBay.com/ITM/PNY-nvidia-fx5200-Dual-VGA-DDR-256MB-video-card-PCI-/160704820819?PT=PCC_Video_TV_Cards&hash=item256ac0f653

  You will need to read the installation manual on the support page and the driver of your PC because I believe that you need to change a setting in the BIOS to the PCI card to the video card main.

  Or you can search for a similar PCI card with a DMS-59 output with video split cable that goes to two monitors.

  Paul

• HP COMPAQ 8200 Elite Micro Tow: Can you tell if this system has slots for SSD or hdd adapter necessary - & gt; SSD?

  Can you tell if this system has slots for SSD or hdd-> ssd adapter need?

  WIN INITIAL 7pro

  i5-4-core - 16GB - RAM - fresh install [new 1 TB HDD] 8.1pro win 10pro Win

  HP COMPAQ 8200 Elite Micro Tower

  P / N:XY139EA #AB7

  PURCHASED 07/03/2012

  For w10pro c: / recommend reinstall to ssd or migrate ssd or even is...?

  SSDS all have sons the same size and holes threaded on the bottom and sides.  They all use the same fine metric threads live short (short, so they don't lower).  These screws must come with the adapter, and I live in general using the lateral holes.  Parts of the adapter have threaded, 3 holes and you will use the back ahead and away from those for channels of the drive Bay.  If you look at each side of a standard 3.5 "HDD, you will see the same same spacing holes.

  Some jobs need the SSD to shift to the left so the orientation of the SSD SATA power and data ports match exactly where they would be if the current drive was a 3.5 "HARD drive clutter.  An example is the drive in a Z620 of drawers which accept 3.5 form factor devices "and slides of drawers in the deep part of the case and automatically mesh with ports of power/data SATA back inside.

  Jobs that fuel just a loose cable and the data cable for the SSD is really doesn't matter much if the SSD is an adapter which keeps it more centered or offset to the left.  I've seen cases where a disk HARD 3.5 "given in the lower Bay and a centered SSD is in the upper drive Bay and there was nearly not enough cable length to reach easily shifted left for drives staggered in the Center.  You can see in the photo below that the Garland of feeding on the HARD drive has two unused SATA power below connectors, and there is not a lot of room between them.

  The card you chose seems good... solid metal.  For the HP 8200 Elite CMT I have access to screws 4 total special 6-32 UNC silver HP threaded screw threaded back ahead and away from the screw holes on both sides of the adapter, and then you use the extraordinary end threads metric short screws mentioned above to fix the SSD to the adapter, as shown in the pictures of Amazon.  These HP silver screw 6-32 no metric I'm talking using Torx or flat screwdriver and their leaders are trained to slip into the channels of the drive Bay.

  There are also other designs which are designed specifically for some HP workstations that include mounts insulation rubber with the sliding mechanism.  I don't think you have that... Here is a picture of eBay one of the 8200 Desktop Elite CMT demonstrating the existence of space on the left for 8 of these silver screw to store, which 4 are missing and used on 3.5 "single drive, you see there.  Don't throw those... they are not something, you can go to Ace hardware and buy.

  

• 8200 elite Small Form Factor: can I add a graphics card in my computer?

  So I have a HP Compaq 8200 Elite Small Form Factor and I was wondering if you can add a dedicated graphics card. If so, what are compatible?

  Video cards that will be compatible must be discreet and very low power 16 x PCIe video cards.  Low power generally assimilated to the discreet with less than 1 GB of video memory video card. Use these criteria when searching for candidate upgrade video cards.

  The following video cards have been listed as optional and is compatible with your HP SFF PC desktop computer.

  graphics card nVidia Quadro NVS295 PCIe x 16, 256 MB 641462-001

  graphics card from nVidia Quadro NVS300 PCIe x 16, 512 MB 632486-001

  Graphics ATI Radeon HD6350 PCIe x 16 512 MB 637995-001

  Graphics ATI Radeon HD6450 PCIe x 16 512 MB 637996-001

  AMD over-pants 2270 PCIe x 16 graphics card, 512 MB

  Upgrading the PSU to what would be needed for a video game level card is not sustainable for a Mini PC like yours.

• computer format microtour dc5800: BIOS dc5800 downloads hidden when Windows 7 is selected

  When I visit the download page for the format microtour dc5800, the update of the BIOS is visible if I select one operating system other than Windows 7. I'm sure that it makes the download that is difficult for many people to find. I assume that the latest version of the BIOS (1.59) is compatible with Windows 7.

  Hello:

  I recommend that you Flash the BIOS using the option F10 Flash ROM of system in the BIOS.

  Who uses only the files BACK and you don't need to still be under Windows Update the BIOS.

  If there is no update of the BIOS listed on the support page, that is who runs the Windows based flash method may not be compatible with W7, and there is a significant risk of causing irreparable damage to the PC.

  So yes, the update of the BIOS will work with any system operating, but executed the Windows based Flash utility should be performed only on an operating system supported listed on the download page of the BIOS.