8460p: HP Elitebook 8460 p won't be fully wake from sleep, need reset to come back

Similar Questions

• Second HARD drive won't wake from sleep

  I have Windows XP on my desktop, and I have installed and formatted a second HDD that I use for storage. The HARD disk that came with the computer is 60 GB, and I put in a second Western Digital 160 GB HARD disc. If I put my computer to sleep and then wake him up the next day, my second HDD is not detected. If I restart the computer, all hard drives are detected. I have their cable select with the original (containing the operating system) in a position to master drive and the storage disk in position slave on cable.

  This has something to do with how long there newest larger capacity disk at startup? Is there something to do here - like how long Windows waits before everything starts up and Windows decides that my second HDD is not there? Is there something I need to refresh when my computer starts from sleep so that he could detect my hard drives? If this has to do with one of the power management options?

  Thanks for your comments.

  Hi Anna,.

  From my experience you will need to set the jumpers for their proper functioning.

  I think update the chipset drivers could be a good step in this problem.

  Sometimes older versions of security software or firewall software may misinterpret information from devices that require resources returning from a suspended state. Sometimes, this is interpreted as attacks of different types, because of the level or type of access requested by the device.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Monitor won't wake from sleep - Vista

  I know it was a topical issue a few years ago, but I still can't monitor back on sleep of the form.

  Card HP computer - Vista 64 home premium SP2 - 512 MB NVIDIA GeForce9500GS

  I tried many patches assumed there.

  Updates on this issue?

  Suggestions in these links help you find a solution for the issue.

  http://social.technet.Microsoft.com/forums/Windows/en-us/42e3381e-19ef-4078-927d-1208a5fc48f5/desktop-wont-wake-up-from-sleep?Forum=w7itproperf

  See also:

  http://social.technet.Microsoft.com/forums/Windows/en-us/eb057f5d-B3E9-419e-AC72-3e00011bf961/monitor?Forum=w7itproperf

• Computer won't wake from sleep after installing the update July 2013

  Original title: a reason any after July 2013 windows update mode "sleep" freeze my computer

  Before I wake up problems due to incompatibility with windows 7 and SATA Hard drives (WD). This problem has been fixed with Windows Update August 2012.  Just recently after July 2013 Windows Update. After that my computer is in mode "sleep" for a certain time it freezes and will not restart until I press and hold the power button until the computer turns off. Then pressing the windows button star as a "Recovery Windows" message will appear.

  I blame the July 2013 Windows Update. But I can't be sure what it causing the problem... I cleaned the Reg via CC & norton util 16 more run antiwalware Malwarebytes and run a Norton virus check. the lock in question remains.

  Any ideas?

  Problem solved... I had added a USB 3.0 Hub to my system. Unfortunately I do not share this Yauqb, thinking that a USB problem would not cause the fault that the USB (connected devices to the) worked well, my lack of this info likely extended the solution time.

  Somehow that it finally dawned on me that look at the manufacturers site hub, of course nestled in the catacombs of the FAQ is a text of presentation all by unchecking the checkbox in the section of wake-up USB Device Manager.

  When you look in Device Manager, USB devices are not the easiest to deal with because there are many multiple subdivisions more with no name and only cryptic blurbs attached when you look in the properties. Lucky a USB 3.0 arrives as 'High Speed' which reduces my 3-point action fields, uncheck all sleep problems fixed.

• computer won't wake from sleep

  I have an ASUS pc. There is a computer week is spent in sleep mode and I couldn't wake up with my mouse or my keyboard (never had this problem before) also my Norton was gone. Re installed Norton eventually but problem still the same of the close turn off PC and re start everytime computer went to sleep, it's still in progress Please help

  Hi Graham,

  This problem can occur because of incorrect power settings or cause corrupted display settings.

  What is the model number of the computer?

  Method 1:
  I suggest you run the power Troubleshooter and check if it helps.

  
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-in/Windows7/open-the-power-Troubleshooter

  Method 2:
  If the problem persists, I suggest you to check that your device is allowed to the computer.

  a. click on start and type of keyboard in the box start the search

  b. then click on keyboard or the Microsoft keyboard in the programs list.

  c. click on the hardware tab, and then click Properties.

  d. click the Edit settings button
  Note: this step requires administrator access.

  e. click the power management tab and then check if allow this device to wake the computer is turned on.

  f. click OKand then click OK again.

  Method 3:
  If the problem persists, I suggest you install the latest form of the manufacturer's Web site display driver and check if it helps.

  Check out the link: http://support.asus.com/download/options.aspx?SLanguage=en

  Check out the link for more information.

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Try to synchronize again 5 s iPhone to iTunes 11.4 on iMac under OSX10.6.8 and it won't let me. Says I need to update iTunes but iTunes tells me that it is up to date?

  Try to synchronize again 5 s iPhone to iTunes 11.4 on iMac under OSX10.6.8 and it won't let me. Says I need to update iTunes but iTunes tells me that it is up to date?

  The latest version of iTunes is 12.3.3

  You need at least Mac OS X 10.7.5 or greater than

• Component of Windows Installer keeps poping up services.msc tried to stop but he comes back a few seconds, a few times it will not be quick to stop also tried msiexec unreg won't. The following will install manually or with automatic updating.

  Component of Windows Installer keeps poping up services.msc tried to stop but he comes back a few seconds, a few times it will not be quick to stop also tried msiexec unreg won't.  The following will install manually or with automatic updating.

  Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Security Update for Windows 2000, Windows Server 2003 and Windows XP x 86 (KB979909)
  Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2416447)
  Update Microsoft .NET Framework 3.5 SP1 for Windows Server 2003 and Windows XP x 86 (KB982168)
  Security Update for Microsoft .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2418241)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB983583)
  Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 update for Windows Server 2003 and Windows XP x 86 (KB982524)
  Update of security for Microsoft Office PowerPoint Viewer 2007 (KB2413381)
  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86

  Hello

  ·        Since when are you facing this problem?

  Windows Installer service is damaged. I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you follow the steps mentioned below.

  Step 1:

   

  a. click on "Start" and then click on 'run '.

  b. type 'cmd' or 'command' in the box and click on 'OK '.

  c. type each of the following commands, and press 'Enter' after all the world:

  CD %windir%\system32

  Ren msi.dll msi.old

  Ren msiexec.exe msiexec.old

  Ren msihnd.dll msihnd.old

  output

  d. Type "exit" at the command prompt to close the command utility.

  e. restart your computer.

  Step 2:

  Download Windows Installer from the following link and install it on the system and see if the problem is resolved.

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

   

  Method 2:

  I suggest to reset the Windows Update components and then try to install updates on the system and check. Follow the steps mentioned below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  For more reference, click on the link below.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I just downloaded winows meïdia player 11 it won't import my music from my external hard drive

  Winows meïdia player 11 won't import my music from my external hard drive whenever I try to add files, it just seems threw? How can I get my music in my library?

  The http://support.microsoft.com/kb/925718 instructions are for WMP 11 on XP. Here are the correct steps to WMP 11 Vista: (note the reset of the library will make you lose all the counts to play and possibly ratings too)

  -Restart the PC.
  -Click Start, type services.msc in the search field and press ENTER. In Services, locate the Windows Media Player Network Sharing Service . If its status is started , double-click the service, and then click stop .
  -Click Start, type %LOCALAPPDATA%\Microsoft in the search field and press ENTER. This folder opens in Windows Explorer.
  -In this folder, rename the folder Media Player as Old Media Player . If you do not see the folder, then it is probably hidden. Set Explorer to view the hidden files and folders and show protected system files.
  -Launch WMP, your library will have been reset and will be rebuilt. Check if the problem persists.

  Tim Baets
  http://www.BM-productions.TK

• laptop won't wake up from sleep mode

  laptop won't wake up from sleep mode

  Hello

  Here's the quickfix.

  Set the laptop to sleep instead of Hibernate. Portable computers may have problems with the Hibernate function. Here are the instructions to navigate:

  1. go in Classic view of Control Panel. (Ctrl + ESC, then type 'control' to quickly control panel access)

  2. double-click on the icon power options

  3. click on "change when the computer sleeps.

  4. click on "change power avancΘs."

  Go to the menu of sleep and

  value "Allow hybrid sleep": OFF

  * Set the parameter "Hibernate after": NEVER

  Note: You need to type the following in the field, what is not there drop down to select.

  This is most likely the issue and the resolution. However, here are a few other troubleshooting steps if you have any questions:

  Troubleshooting of the sleep mode function:

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  Hope this helps,

  Steve <> Microsoft Partner

• BlackBerry smartphone phone off and won't come back

  Hi, two days ago my Blackberry Curve ran out of charge and Won ' t back lights. When I load it, the phone turns on indicating that the current passes through, but it just won't come back. A minor and independent, it's that when it still worked, I couldn't download Whatsapp. Please help if you have an idea of what might happen. The device never fell down

  Hello and welcome to the community!

  Please try this sequence... Note that, throughout the whole 4h15m process, your BB should stay connected to a good charger (not the USB PC):

  1. With battery, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the screen not
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the screen not

  This has been known to "revive" some BBs.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charge battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem.

  Good luck and let us know!

• Only in a. won a Citizen receipt printer and I need to change the preference to print, I get a 'operations can not be a complete mistake.

  Only in a. won a Citizen receipt printer and I need to change the printing preferences I get a "operations may not be a complete mistake", I'm working on the administator. I am able to access printing preferences for all other printers that are on the computer.  This creates a problem that prevents the reception of a printing web-based program.

  I'm using a new hard drive with Windows 7 above.

  How do you re - define preferences depends on options software printers, and if this printer is fully supported under win7 - that is to say that the printer manufacturer provides some win7 drivers/software

• I just bought adobe acrobat for Mac, and it won't download because it says I need a windows computer why?

  I just bought adobe acrobat for Mac, and it won't download because it says I need a windows computer why?

  Hi gary Griffith,

  I checked your records and found that you bought subscription Acrobat Pro DC (at least). To download and install Acrobat DC on MAC, I would ask you to kindly follow the steps mentioned in the link below:

  Acrobat DC subscription | Download and install

• went to use creative cloud and it won't let me open photoshop, says need to renew the subscription, but says page not found, I was paying £15 a month for it, hope you can help as soon as possible because I need to use it for my United work

  went to use creative cloud and it won't let me open photoshop, says need to renew the subscription, but says page not found, I was paying £15 a month for it, hope you can help as soon as possible because I need to use it for my United work

  Hello

  Maybe it's an activation issue, please see the link https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Kind regards

  Gag

• I have an old version of Photoshop.  And a new computer.  It won't let me load from my drive.

  I have an old version of Photoshop.  And a new apple computer.  It won't let me load from my drive.  Any idea?

  CS2 is too old to be compatible with the new Macs. There is nothing that you can do because it does not work on the new Intel Macs as it was designed for the old Mac PowerPC.

• EliteBook 8460p: HP EliteBook p 8460 - last ProtectTools version where is it?

  Hello

  Does anyone have the link to download the latest version of the tools of protection for Elitebook 8460p?

  Thank you!

  Unfortunately, I do not know how the software works because I do not use it.

  Maybe you should try the most recent client security manager software that has replaced the software tools of protection.

  You must uninstall the software tools to protect first and restart the computer before the installation of the client security manager software.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212910&swItemId=ob_141863_1&swEnvOid=4158#tab1