8460p HP: HP 8460p pci interface? I want to add a gpu.
I am looking to buy this laptop and add a gpu, but I've heard there are 2 kinds of gpu pci interfaces, mxma, and mxmb that I believe and I would like to know what pci slot there.
I did research on this laptop and some models used an amd 6470 m and I heard that the models that do not have this gpu are upgradable so please help!
A parenthesis is also I think to put a gtx770m in the present, the heat sink looks like it cools the cpu and the gpu, this radiator will be enough? I think so considering GPU is generally warmer and use more power but IDK help would be apreciated, but I will probably use an external pad cooling in any case if all things to think about.
Here is the Service Manual:
See page 2 and also see pp. 92-93. These models have UMA or a discrete chip soldered to the card. There is no mxm connector any the only possible upgrade would be if you have the UMA (integrated), you could get a motherboard with the discrete in addition to the integrated video chip. Your laptop would not support a board designed for the 8460w Mobile Workstation that uses over-pants graphic workstation.
Here are pictures of the manual showing the heatsink covering the processor on the right, which is located in an outlet, and the chip gpu on the left which is flush to the Board of Directors. If it were a mxm graphics card, he would have a decision as a large memory support under the video card and the video card would be removable with a few screws bolting it down.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
Tags: Notebooks
Similar Questions
-
Hello
I bought the HP ENVY 15-as032nr with only 512 GB SSD laptop. I want to add additional 1 to hard drive. Can it be done?
Yes, you have the 512 m2 NVME PCI - e (lucky) drive gig and that goes into a slot and then there is also a slot open for a standard hard disk 2.5 thumbs or SATA SSD. See pages 30-33 of the manual here:
It is likely that your laptop does not contain the HDD mounting kit and cable as shown on page 30 and 31 and this note is in the Manual:
The disk spare parts kit hard does not include the rubber hard drive support or cable hard drive. The hard disk rubber support is available using the spare part number 857797-001. The hard drive cable is available by using the spare part number 857806-001
An extra $ 66 for the housing and the cable seems a bit strong, but I couldn't find their sale anywhere other than HP Store.
This isn't a simple upgrade; If you need assistance.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
I want to add a second hard drive for my Pavilion Elite HPE 410f. Recommendations?
I want to add a second hard drive for my Pavilion Elite HPE 410f. Recommendations? Somewhere in the 320 to 500 GB range and I want a quick unit because it will be used for rendering videos. Thank you for your response.
Hello
How fast is fast is the real question.
Have you looked at hybrid drives OCZ? Expensive but probably the fastest option.
Seagate also made a hybrid hard drive. Good price... You will need a 3.5 "to 2.5" support if the player does not support. If you install the drive in an empty optical Bay then you will need a 5.25 "to 2.5" support.
Your other choice is 7 200 or 10 000 rpm traditional hard drives.
Another option would be to add a PCI sata and two external hard dirves configured in RAID 0.
-
I can't add to the documents together in pages. I want to add a list of references on the end of an assignment, but they are on 2 separate documents, thank you.
Open the first document Pages. Add a new section. Copy / paste your list of second document reference material in the first page of the News Section. Record.
-
you want to add a TV channel to my 3rd generation Apple TV: how to?
How can you add a string of television of a 3rd generation Apple TV. I want to add YuppTv. The content provider says it work with AppleTV.
You can not. 3rd generation Apple TV are not editable. If the provider is not already on it it is impossible to add it.
If the provider has an application to download, you need a 4th generation Apple Tv to download.
-
I already use: [email protected]
My provider has created three new e-mailaccounts:
[email protected]
[email protected]
[email protected]Now, I want to add these accounts to my thunderbird. How?
-
I want to add my laptop to my list of devices to find my Iphone
I want to add my windows laptop to my list of devices so I can find my IPhone and or IPad, but the instructions do not cover a windows based pc.
The computer must be running Windows 10 and later > check the list of devices in your Apple ID to see where you are connected - Apple Support
-
I want to add some local cryptographic algorithms to Firefox. I know that I have to modify NSS. I can, for example, change only NSS and use this library in the browser, or should I do something else with Firefox?
You can try to ask for advice in the press group
Mozilla.dev.Tech.crypto - Google Groups: -
I was watching a movie on a site that I subscribe to and a screen came to ask if I wanted to add a filter. I clicked Add Filter. Now my Flash Player is not compatible on Mozila Firefox but not Internet Explorer
Looks like you are using Adblock Plus that causing this problem.
- Go to Firefox/Tools(Alt+T) > Adblock Plus > filter preferences > custom filters
If you own Adblocking rules, delete, select Action > delete (Del) > click Yes and then close then try
-
I want to add a new application to the list right click on file-> open with
and also reorder the list so my search app is first / top of the list.
I know that I can use open with-> other and select any application, but it takes too long I should use my intended application in this way several times a day.
Basically, I'm looking for a configurable way configure open with, something more to send to Windows.
Thank you very much for all the advice offered.
The operating system, not you, not control that open with the menu command.
-
Satellite Pro A100-828 has an interface 64-bit on X 1600 GPU memory?
Hello
Satellite Pro A100-828 has an interface 64-bit on X 1600 GPU memory? Please help I get only 2500 points on 3dMark05 on a Satellite Pro A100-828. The GPU is X 1600 with memory dedicated 128 MB + 384 MB Hypermemory. This card should be approximately 3500 brands.
Thank you
Shahid
I studied in the World Wide Web, and it seems that the X 1600 supports a 128-bit interface
I not found any x 1600 with 64 bit so I think that it s a 128 bit -
I want to add fingerprints, but I can't add it
I want to add fingerprints, but I can't touch too add it
Try the procedure described at the end of article from the technical support of Apple ID use touch on iPhone and iPad - Apple in charge .
I hope this has helped
-
I have previous bookmarks saved as .json files and simply want to add to my current favorites. I searched, but am unable to find a way to do this. I have
Restore a JSON backup will replace all your existing bookmarks (you receive a warning about it), so if you already have the bookmarks that you want to keep and then export them to a HTML file before you restore the backup JSON.
You can import this HTML file after you restore the backup JSON to retrieve your current bookmarks (you need to remove duplicates).
You cannot import a JSON backup to add bookmarks (merge).
-
How to streamline all the features of 4.0, but without adding skins, themes or backgrounds? Basically, I want to keep the default value for the previous Firefox version as this new 4.0 is ugly and bulky, and it doesn't for a fluid navigation. I don't want to add all of the customizations that will slow down my computer so I want it much like the previous version. I'll try to rectify this that revert to a previous version. Thank you.
http://www.computertechtips.NET/64/make-Firefox-4-look-like-FF-3-6/
-
I want to add a fingerprint on my iphone 5s, but I can't. It shows unable to complete Setup touchid please go back and try again. Please help what should I do?
Keep trying. But first, I restart the phone.
To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.
If she agrees not always the fingerint, reset all settings. No data is affected, but you will have to re-enter all the parameters of the device and the phone will restart on its own. Settings > general > reset > reset all settings.
Always make sure your finger is clean, free of any oily substance and the same goes for the home button on the phone.
Maybe you are looking for
-
How to prevent the formation of bubbles during the use of paper in HP Matte adhesive polypropylene
I use a printer of z5200 with adhesive polypropylene post script. I maintain a Board printing fine hard that I buy at Home Depot. I noticed that on the occasion, bubbling will occur and is excellerated with heat. I wonder what are the best substrates
-
Original title: Virtualization server 2012 I got too many answers to this question. I need the correct answer before buying any CALs galore. I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a dat
-
Since I have installed 8.1 (pro), I can't use my 8600 software Pro for scanning the computer (via USB). It seems that there is no communication with the printer regarding the scanning software, but printing as usual. Tried to use the HP printer Assis
-
The disks are of various types, DS HD and HD. They contain copies of already published books which I would now like to publish on Kindle. A disc is open with a useful book, but stupidly I didn't not immediately save it to my documents folder. Now it
-
Virtual keyboard hides part of the change to the field
Hello I have a labelfield, field change and a button that are centered aligned vertically. The three fields, I added in a Verticalfield Manager which is then added to a horizontal region Manager. And finally the HFM is added to an another value for m