8500Aplus, works perfectly with the PC, but it still appears in offline mode with mac on the same wifi network

I downloaded the latest drivers, more than once. Installation, set up and configuration gain of "successful" messages When I then try to print I get always "printer offline" message on Mac Book Pro running OS X 10.6. Prints beautifully PC running Vista immediately after and network check lists all the devices. Help!

Looks like there may be a problem with the Mac printing system since it works from Windows System.  It is also not as if there is a network communication problem as it works from Windows system and a network issue would be present on both systems.

The Mac printing system could have a problem and may need a reset.

Follow the steps exactly as stated in Mac OS x: how to reset the printing system.

Once this is done, click on printer HP v.2.9 OS X drivers and install this driver suite that Apple has included for OS X 10.6.

This will reset the Mac printing system and install the latest drivers having Apple for the platform OS X 10.6.

Tags: HP Printers

Similar Questions

  • Uninstalled Reg work of my computer twice, but he still appears and how do the rest of my computer?

    I uninstalled work Reg, DELL has uninstalled work Reg and tell me this isn't here but it appears eager to do a scan and difficulty.  This program has been installed by Dell and I never activated, but in it and I can't get out.  Someone help please?

    See if this helps: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-e-g-Windows-8-Software-Recovery/RegWork-is-on-my-hard-drive-Uninstall-will-not-remove/td-p/415047

    J W Stuart: http://www.pagestart.com

  • WES610n two or more on the same WIFi network

    I have a router E4200 running a wireless network with a bridge of WES610n and an extension of Belkin dual-band range (which extends from the 5.4 ghz band), can I connect a second WES610n on the network without interference and loss of performance on devices on a network, on both the bridge of WES610n, the Extender of Belkin?

    You can connect a second WES610 to the network and it will work without interference, but there is probably a speed reduction because more devices will then share the bandwidth network. In some cases where there is interference, the router's wireless channel setting and moving devices can help avoid the interfering signal.

  • Is Edge inspect the desktop to the internet connection sharing (for example, VPN) or just the same WIFI network?

    I'm asking because on my work VPN all our screening sites are behind the firewall and so curious if my android device running the Dashboard Viewer inspect also share this VPN connection or if the cutting-edge office essentially comes the camera to a normal URL? The unit doesn't have native VPN access.

    I am unable to test this, because our company blocks all Chrome extensions, and before I go through a long process to unlock this particular extension I just want to see if it would work I described.


    Thank you!

    Inspect edge relies on your local network for communication. Many VPN services will seal your machine connected to your local network when the VPN tunnel is open. Inspect edge does not work in this situation. Ask your VPN administrator to determine if there are parameters that will allow you to access your local network when connected to the VPN. Yes, the desktop application pointing devices to the url and the url must be accessible by the network device is connected to.

    In addition, Port 7682 is required by Edge inspect. If another application or service is using this port, you must reconfigure either to use a different port or close Edge to inspect work.

  • When the cellular calls come to the iPad? Both on the same wifi or any wifi?

    If anyone can confirm when the calls show on your iPad? Do when your iPhone / iPad use the same Apple ID and are on the same wifi network?

    Reason why I ask is that I lost my phone and just until its battery died my husband phoned to her. The call came on my iPad and I thought I heard something vibrate (iPads vibrate or could it have been my phone?) while the battery is dead.

    I read in some places that they must be on the same wifi network for the calls to come through is - it true or both do I just wifi?

    They do not need to be on wifi even intranet as the continuity of the iOS feature does not work on the Internet, but only when connected devices are on the same local network. And no, the iPads have no vibrate function.

  • I created a my page book epub file, and it works perfectly in ibooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

    I created a my page book epub file, and it works perfectly in iBooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

    What's not?

    You must check the iBooks category in your OS X system preferences: Panel iCloud: iCloud Drive: Options: Documents Panel. On iOS, you must have enabled to iCloud and in the iCloud Drive location setting iBooks. Also, in iOS parameters: iTunes and App Store, ensure that iBooks is running.

    The iBook.epub file is a compressed/compressed and renamed folder that represents a single file to any email client. What do you mean, it cannot be sent correctly - and it's your experience, send, or the failure of the recipient to view the ePub document? What email client?

  • Is there a list of graphics cards that work perfectly with all the new features of Creative Cloud? I want to update my graphics system and want a model that will be obsolete when the next CC updates the roll autour.

    Is there a list of graphics cards that work perfectly with all the new features of Creative Cloud? I want to update my graphics system and want a model that will be obsolete when the next CC updates the roll autour.

    The "General" cloud requirements are quite low... so you have to ask in the forums of specific program for a special features used by individual programs

    For video editing Premiere Pro, go read it in community: Forum Hardware | Adobe Community

  • A DesignJet 1055 CM c6075a would work OK with Mac OS 10.7 (Lion) or 10.8 superior?

    A DesignJet 1055 CM (model A, c6075a) would work OK with Mac OS 10.7 (Lion) or 10.8 superior?  I don't have a Mac; I plead for a potential buyer of my 1055CM. The 1055CM currently has 96 MB of RAM; I could put 128 MB in.

    I would get "out of memory" problems?  I think that maybe there is no "computer in process" option in the Mac OS 10.7 for the 1055CM pilot, but I'm not 100% on that.

    I guess it depends on how simple designs are. The application is for printing large topic say 24 "x 24" vinyl stickers vinyl roll.  Well, maybe raises another question: would a 1055CM, printing on vinyl OK?; I guess because they seem to be very similar architecture/configuration as a 5000 or 5500 and these OK printing on vinyl.

    Thanks a bunch.

    Paul

    Hi Paul

    I wouldn't say a 1055 for work of vinyl. There are a few suppliers who can provide a vinyl fot this printer, but it's not too successful.

    First ink 1050 won't last long, it will fade fade very quickly. (you can use a laminate liuid, but time consuming, will not worht it.)

    Secondly, the 5000 series printers have a different ink, it means the UV ink and ink to dye. Two inks are specialised in the printing of "vinyl" or "post".

    Your best bet is to get a HP designjet with Viera of ink, with the correct paper, that they have to use intermediary.

    Otherwise a second hand series Z (Z2100 going quite cheap, comes in a cheaper A1) these printers have pigmented ink which have a longer life of the door.

  • Several Tunnels with the same distance network & destination in cryptographic maps

    This maybe a newbie question, but I don't have production systems and don't really have a way to test our properly. We have an ASA 5520 with several tunnels from site to site. We already have a tunnel with one of the remote networks in 10.100.90.14. We have this IP on a subnet configured as remote network and the destination address in the card encryption. We also exempt rules NAT in place for our local network with the 10.100.90.14 address as the destination.

    We have another tunnel that must be built and who will have a different address peer, but that requires a large number of subnets and at least we'll have the same remote network/destination address in the map encryption and VPN tunnel that we already have in place.

    Is this possible to do with a tunnel of site to another without a static or dynamic NAT to a different IP address?

    I know, with physical networks, that it is impossible because of the static routes that are in place, but with the ipsec tunnels I'm not sure how it works, and as mentioned, I'm not able to test it.

    Any guidance would be appreciated.

    Bill

    The acl crypto map defines interesting traffic. If you have the same destination IP address, IE. 10.100.90.14 then if the source IE. the IP address of the client on your network is identical for the two tunnels, then no, it won't work and you will need to make some sort of NAT for one of the tunnels.

    Jon

  • Have a gmail account but deleted all the contacts, but they still appear on my app people.

    I have a Gmail, but you deleted all the contacts, but they still appear on my App people please help

    Separated from the <> https://answers.microsoft.com/en-us/windows/forum/windows_8-ecoms/people-app-in-windows-8-pro-not-syncing-gmail/90440534-795b-406c-a6ed-f77b9a40478b >

    Check to http://people.live.com instead (the online source of the people application) and see if she is still synchronized.  Also, it may take a day, because synchronization of google working on an interval timer.

  • Anyone with the problem of not show apple tv on the same wifi to connect the new application remote control (with the last operating system both on device)?

    Tried to connect the new (launched in July 2016) Apple Remote app, I'm not able to add the Apple Tv from my iphone (5 c), because it does not show apple tv to connect even on the same wifi. I use the latest os on iphone and TVos 9.3.3.

    9.3.3 isn't the latest version of the software for your phone or your Apple TV.

    Try the following steps for the Apple TV 4, check if things work after each step if necessary, before you try the next.

    1. Restart the Apple TV (settings > system > restart).
    2. Restart the Apple TV by removing ALL cables for 30 seconds.
    3. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  • This software works well with Mac to convert EPS files in JPEG files?

    This software works well with Mac to convert EPS files in JPEG files?

    EPS to jpg converter

  • I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it.

    I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it. I made sure they are both connected to my home network and when I go to control panel / printer and try to add a network printer / wireless. He won't find it. Any ideas?

    Hello

    I suggest you to visit these links and check if it helps:

    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

    It will be useful.

  • All my music is deleted from the computer, but it still appears on Windows Media Player.

    I have Windows 7. When I remove it, it says this, but it still appears on Windows Media Player. Also, when I click on it, it is not play, which would make sense. So how to remove properly?

    I have Windows 7. When I remove it, it says this, but it still appears on Windows Media Player. Also, when I click on it, it is not play, which would make sense. So how to remove properly?

    1. reboot the System.Make sure that WMP is closed.

    2. in the start search box type:services.msc and press the enter key.

    3. go to Windows Media Player Network Sharing Service and double click on the service and click stop.

    4. again go to the search box, and then type: type %LOCALAPPDATA%\Microsoft and press the enter key.

    5 remove the Media Player folder. (This is a hidden folder, so you must set the Explorer to view the hidden files and folders and show protected system files.

    6. start WMP.

  • How many people can work simultaneously on the same site of cc adobe muse?

    How many people can work simultaneously on the same site of cc adobe muse? I intend to create a national project in South Africa, which the Web site will be ideally worked on nine people in the same office. Each of these people will create pages on the same Web site for customers of one of the nine provinces. So I wonder if it is possible so to do, of course the intention is to purchase a multi-user of Adobe Muse CC nine computers license. Please help if you know the answer of the thw.

    Hello

    Take a look at this topic, it may be useful,

    How many users at different locations can access my site Web of Muse files to be updated?

Maybe you are looking for

  • iPhone 6 s more - no SIM drawer key

    Hello I bought an IPhone 6s more and it turns that there no key pay the drawer to SIM card in the box. Is this normal? Thanks for your replies.

  • Satellite A100-784 - how can I make another copy of my recovery disc DVD

    Hi all I have the Satellite A100-784, which comes with Vista Home...How could I make another copy of the DVD from my recovery disc? Also, I don't have the Toshiba Recovery Disc Creator... is downloadable?

  • My Windows XP PC is so slow that I can't use it on Normal Mode.

    My PC Windows XP has slowed down to the point wjere, it is unusable when I start in Normal Mode.  It is slow to start and slow to open a session, it will freeze in Normal Mode and I have to close it using the PC switch.  I was running and trying to s

  • Window Vista. Loading failure using the VxD (code 19) charger?

    I scan my computer and it says that my compact flash is not working and 'Failed to load using the charger VxD (code 19)' how can I fix. Also when I play all the games, such as mabinogi, the game begins to lag very much, even to freeze sometimes, thin

  • Presentation of the multiSite screen

    Hi gentlemen, My setup. -1 x with active MultiSite C40. -1 x C20 -1 x Movi C40 launches a MultiSite opening C20 and Movi. In C40 I got several presentation of the screen but to the Movi and C20, I had available to active speakers (to not) several lay