8570w HP dreamcolor, WHAT Type of display (conduit/conduit/RGB-led white) light?

Similar Questions

• What type of display TN?

  Computer HP 2711 x 27 "widescreen LED backlit LCD display

  Hello

  Try this Wiki:

  http://en.Wikipedia.org/wiki/TFT_LCD

  Kind regards.

• Satellite Pro A120-106: what type of screen?

  Hello
  I intend to buy a new notebook, exactly Satellite PRO A120-106 and I found different information on the websites of the shop on display. Do you know what type of display is used in this model, TN or * GOING?

  Thank you

  Hello

  I found information that this device supports a display size screen 15.4 "WXGA TFT with an internal resolution of 1280 x 800.
  That's all what I found on the screen.

  Check out this page of presentation of Toshiba model:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=118120

• Laptop HP Stream: what type of memory for my computer

  Hi, just bought a HP laptop, Stream 11th session of the Committee. 11d015na with intel Celeron processor N2840 (2.16 Ghz), 32 Gb MEM, 2048 MB DDR3 SDRAM, 8.1, 29.5 cm diagonal HD LED display Windows, with WLAN & bluetooth...

  What type of fact memory card take machine my daughter, it's SD, SDHC, MICRO, so a lot of different types and she can't find information in the spec.

  Many thanks simon

  Hello

  The following link shows its specifications:

  http://support.HP.com/ID-en/document/c04719506

  Very safe to use the SD (SDHC) card up to 64 GB.

  Kind regards.

• Type of display and Dell U2413 technology?

  Hello! I have Dell U2413 monitor and i1Display calibration Pro and X-Rite i1profiler software. My question is, what should I choose in the list below? Select your type of display and technology CCFL Wide Gamut CCFL white LED RGB OLED Plasma RG Phosphor projector LED

  "RG Phosphor", all of Dell's GBLEDs share backlight type: U2413, U2713H, U3014 and the 4 k monitors UP2414Q and UP3214Q.

  It is the same for all that the GBLED you want to calibrate with an i1DisplayPro, Dell or not

  Edit:
  BTW do not use i1Profiler, use 1.5.3 BOF CAL1 and CAL2, and ArgyllCMS 1.6.3/DispcalGUI 2.1 with spectral correction GBLED (phosphorus RG) to calibrate "Custom color", "sRGB", "AdobeRGB" or "Standard" OSD mode.
  Just search this forum

• Can a dynamic action of type 'alert' display a value of field without javascript?

  Hello

  can a dynamic action of type 'alert' display a value of field without javascript ( alert ( $x (P '200_OP').value)); ?

  What should I write in the 'text' section to display in the alert, the value of P200_OP for example?

  Gianpaolo cordially

  Hi gianpagi,

  gianpagi wrote:

  I know that with "run JavaScript Code" works. My question is about action as 'alert '.

  Dynamic action "Alert" is expected to this only the string to display in the alert. May not be able to access the current value set in a page element.

  Therefore, "Run the Code JavaScript" only works in this case where your can integrate the current values of the DOM html elements

  If you notice that da 'Alert' request 'Text' and 'Execute JavaScript Code' DA 'Code' request to be executed.

  Kind regards

  Kiran

• 1067: coercion of a value of type String to an unrelated type flash.display:DisplayObject.

  Hi guys. I build games never anything too big. I'm having fun.

  I get the following error message

  1067: coercion of a value of type String to an unrelated type flash.display:DisplayObject.

  He got to do with the varObject variable, that I convey in the hitTestObject (at the end of the code)

  a. I exported the moveclip for actionscript and it has given an instance name so, what's the problem?

  stage.addEventListener (MouseEvent.CLICK, myClickReaction);
  speeds the LONG NYPOTENUSE
  var v: Number = 5;
  var varObject:String;
  var i: Number;
  var arrayObjects:Array;

  complete table and initialize the variables i and varObject
  arrayObjects is ['chocolate', 'ice', 'pizza', 'Burger', 'sandwich', 'egg'];.
  i = 1;
  varObject = arrayObjects [i - 1];
  trace (varObject);

  
  mouse click point
  var clickPoint:Point = new focus();
  function myClickReaction(e:MouseEvent):void {}
  clickPoint.x = mouseX;
  clickPoint.y = mouseY;
  addEventListener (Event.ENTER_FRAME, onEnterFrame);
  }
  function onEnterFrame(event:Event):void {}
  var xDistance:Number = clickPoint.x - sunny.x;
  var yDistance:Number = clickPoint.y - sunny.y;
  var angle: Number = Math.atan2 (yDistance, xDistance);
  Sunny.x += v * Math.cos (angle);
  Sunny.y += v * Math.sin (angle);
  If (clickPoint.x > = sunny.x) {}
  sunny.gotoAndPlay ("walk straight");
  trace (Math.ABS (xDistance));
  }
  If (sunny.x > = clickPoint.x) {}
  sunny.gotoAndPlay ("left foot").
  trace (Math.ABS (xDistance));
  }
  If (Math.abs (xDistance) < = 10) {}
  trace ("Works");
  sunny.gotoAndPlay ("static");
  removeEventListener (Event.ENTER_FRAME, onEnterFrame);
  }
  }
  addEventListener (Event.ENTER_FRAME, enterFrameHandler);
  function enterFrameHandler(e:Event):void {}
  If (sunny.hitTestObject (hotspot_pizza)) {}
  If (sunny.hitTestObject (varObject)) {}
  trace ("Yes boy");
  }
  }

  If you have objects with references (in the current scope) which correspond to these channels, you can use:

  stage.addEventListener (MouseEvent.CLICK, myClickReaction);
  speeds the LONG NYPOTENUSE
  var v: Number = 5;
  var varObject:String;
  var i: Number;
  var arrayObjects:Array;

  complete table and initialize the variables i and varObject
  arrayObjects is ['chocolate', 'ice', 'pizza', 'Burger', 'sandwich', 'egg'];.
  i = 1;
  varObject = arrayObjects [i - 1];
  trace (varObject);

  mouse click point
  var clickPoint:Point = new focus();
  function myClickReaction(e:MouseEvent):void {}
  clickPoint.x = mouseX;
  clickPoint.y = mouseY;
  addEventListener (Event.ENTER_FRAME, onEnterFrame);
  }
  function onEnterFrame(event:Event):void {}
  var xDistance:Number = clickPoint.x - sunny.x;
  var yDistance:Number = clickPoint.y - sunny.y;
  var angle: Number = Math.atan2 (yDistance, xDistance);
  Sunny.x += v * Math.cos (angle);
  Sunny.y += v * Math.sin (angle);
  If {(clickPoint.x>=sunny.x)}
  sunny.gotoAndPlay ("walk straight");
  trace (Math.ABS (xDistance));
  }
  If {(sunny.x>=clickPoint.x)}
  sunny.gotoAndPlay ("left foot").
  trace (Math.ABS (xDistance));
  }
  If (Math.abs (xDistance)<=10)>
  trace ("Works");
  sunny.gotoAndPlay ("static");
  removeEventListener (Event.ENTER_FRAME, onEnterFrame);
  }
  }

  
  addEventListener (Event.ENTER_FRAME, enterFrameHandler);
  function enterFrameHandler(e:Event):void {}
  If (sunny.hitTestObject (hotspot_pizza)) {}
    If (sunny.hitTestObject (this [varObject])) {}
  trace ("Yes boy");
  }
  }

• What type of cable/port is called also where I can buy one?

  

  Please link me the website where they have cable!

  This is the "mini-DVI' to this end.  Cabe you need depends on what type of monitor or projector, you need to connect to the other side?  Apple sells adapters for this purpose and made StarTech.

• What port mini display of brand to HDMI cable should I use?

  What port mini display of brand to HDMI cable should I use?

  Besides Apple, Belkin seems to have good reviews.

  Ciao.

• I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

  I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

  https://eShop.MacSales.com/item/NewerTech/MXPCIE2E2U3/

  https://eShop.MacSales.com/item/NewerTech/MXPCIE6G2S2/

  https://eShop.MacSales.com/item/NewerTech/MXPCIE6GRS4E/

  https://eShop.MacSales.com/item/sonnet%20Technologies/TSATA6PROE2/

• What type of video card? PCI, PCI Express or AGP?

  I have a new hp a6647c and you want to use two monitors. I need a new monitor VGA video dualistic structure. A store asked me what type of Governing Council would hold in my computer, CPI, CPI Express or AGP.  So, how can I determine which Board is necessary for my hp 6647?

  Here are the specs:

  http://support.HP.com/us-en/document/c01559155

  You can not use an AGP card. There is no AGP slot. You have an open pci express x 16 video card slot and a pci slot. You may in fact theoretically have three monitors; two ducts by a dual PCI express head and a third led by a pci video card. If you plug a video card into one of the expansion slots, you will lose the onboard video capability.

• 57nr 6B dv7: what type of power button Board cable I have

  I'm looking for what type of power button Board cable I have I need a new replacement

  Hi @DarknesReasz,

  Thanks for posting HP forums! I read your post and wanted to help.

  I understand that you are looking for a replacement power button Board cable.

  I found below on Page 36 of the Pavilion dv7 Maintenance and Service Guide

  

  You could search the part number on the link of the HP parts store.

  Let me know if theses help to resovle your issue

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• What Type of PCMCIA is supported by Equium A200-1ED?

  Hello

  They gave me this old Equium A200-1ED which is too slow for window 8.

  Putting aside the expensive option of a SSD, I thought to install windows on an SD card but the BIOS do not see it as a boot device and the driver seems not to recognize as exFat and even then it only reads that 27.7 GB on a 64 GB card.

  So my next option is to get an adpater for the ExpressCard/PCMCIA location for the 64 Gb SD card that I hope the BIOS will be able to see as boot drive, but I don't know what Type (PIN configuration) of the card supports this machine slot.

  The driver seems to think that he supports PCMCIA, but I know that it is not a Type II, because I have a Type II device that does not fit into here.

  I don't want to open it, so I wrote to Toshiba, but I didn't get any answer.
  So maybe someone here can help.

  Any ideas?

  Thank you

  PCMCIA is designed for the use of some external devices, but the idea to use the preinstalled with OS boot device is really crazy. I'm pretty sure that this will not work.

  A few years ago, I had Satellite A200. It is the same model as your satellite. If you want to have good enough laptop s performance I recommend to install Windows 7 32 bit. This machine was designed for Vista, but it is supported for Win7 32 bit. WIN8 isn't the solution for this old piece of hardware.

  With Win7, it works fairly well, stable and faster than original Vista. SSD is very good way to increase the performance of s for laptop, but it costs a little. Anyway, you shouldn't buy the best and most recent SSD. You can get an opportunity for a lot of money.

  Anyway, combined with mise a niveau of RAM and Win7 installation is, in my opinion, best option for you.

• Re: What type of video connection has the Tecra A10 - 11I: VGA/DVI?

  Hello

  I'll buy a cable to connect my Tecra to the TV. The manual of the TV indicates that laptop to connect may have a DVI or VGA connector.

  What type of connector the Tecra A10 - 11I there? I can't find this information anywhere.

  Thanks for the help!

  bwprius

  > I can't find this information anywhere.
  It's really strange.
  You have this laptop in front of you?

  All ports are described in the document user s manual, so please open and check the 35-40 pages. You will find explanations for all available ports.

  If you do not have this document you can download it HERE.

• What type of adapter you equip cards sd?

  I am updating from a 3rd Gen with an air 2 ipad.  What type of adapter you put the SD with an air 2? With my older ipad, I used an apple sd card reader connected to the PIN 30. I bought an sd for the ipad Reader 8 pin 4th Gen that was my wife and she wouldn't. I use my ipad for hundreds of photos, all the 8 numbers and DCIM. Thanks for any help.

  node http://www.Apple.com/Shop/Product/MJYT2AM/A/Lightning-to-SD-Card-Camera-Reader?f = 91

  Work on my mini 4