8600 fax pro HP journal

Similar Questions

• Problems 8600 fax pro

  I have problems of fax with my HP Officejet Pro 8600.  The fax goes fax test reports.  However, I can only fax in my own area code or State.   NO out of State.   I can't find something that solves this problem.

  What I see on the two codes you sent me is that the machine remote (that you send) is either inaccessible or that information has been received but was so riddled with packet-loss (loss of data) that it could not be interpreted.

  http://support.HP.com/us-en/document/buu02549

  Usually with Warner Cable you are dealing with an ADSL line, in which case you will need to get a digital filter and put it on the line to help prevent this data loss. You can usually contact them to see if this might be the case, and whether or not they can give this your fax line ADSL filter.

  Let me know and I'll get right back with you!

  -Spencer

• How to make a 2 on 8600 officejet pro faces?

  How to make 2 copies of faces on my 8600 officejet pro?

  Hello. Page 44 of the manual has the stages of duplex in the open program that you want to print from Windows, it covers how duplex with a Mac OS X on page 45 of the manual.  Here is a link to this manual. I hope this helps. http://h10032.www1.HP.com/CTG/manual/c03026243.PDF

• M1217: Can I pass a HP 8600 fax contacts to a HP M1217?

  Is there a way to pass my contact HP 8600 fax list to the phonebook on a M1217.  Manual user supported software lists program directories, but products HP are not listed.  I think there will be a way to move the contacts between the HP products.  Thank you.

  If they are stored in a directory on the PC, then you should be able to leave them in the folder and they must convert from one printer to another. I would backup all files associated first of all, just to be sure.

• OfficeJet Pro 8600: OfficeJet Pro 8600 is no longer connects to the network

  I serve my 8600 OfficeJet Pro on a local network with a wireless connection to a router. Now the printer will not connect to the router.

  I can ping the printer to the router, then the wireless hardware works. I can print when it is connected with a USB cable, scanning to a USB key, so printing/scanning equipment works.

  WiFi Protected setup does not work. When prompted I press the button on the router for 3 seconds, the printer who sees because I get a 'connection to the network"roundy roundy, but it times out instead to complete the connection.

  The WiFi connection wizard does not work. Analysis of available networks found my network, but when I enter the password, I get a "trying to connect to the Network" roundy-roundy, followed of a message "Wireless invalid password (WPA) has come."

  The printed report assures me that's the wireless works, and that the WPA password that I entered the printer does not match the configuration in the wireless router. It is wrong - it's the same password using my computer and the computer has no problem connecting. I changed the password on the router (and the computer) and tried the new password on the printer, but that does not work either.

  Is there a way to erase the memory of the printer and restore the default settings that can help?

  Temporarily remove the password and all the safety devices on the router. Save the settings. Now try to connect the printer to your SSID not guaranteed without password. Are you successful? If so, go back and add a WPA2-AES encryption with your password and try to log in again. Do not use WPS.

• 8600 officejet pro to only print in black and white only

  How can I configure my 8600 officejet pro to only print in black and white automatically so I don't have to authorize whenever I print?

  Hi Andrewbono,

  You're welcome, I'm glad we were able to fix everything together!

  If you feel that one of my suggestions brought you a solution please feel free to mark it as an acceptable Solution to facilitate advice for others to find.

  Whatever it is, it was a pleasure to work with you and wish you a great week

• How legal sheet and officejet pro 8600 fax

  How do fax you a legal form on officejet pro 8600?

  He has not worked for me; There are no settings on the bottom of the screen after using the ADF.  However, what works, it was to set up the legal size in copy mode before faxing.  But thanks a lot for the advice anyway.

• More HP Officejet Pro 8600 - Fax answering incoming calls instead of answering machine

  I set up the fax on my new HP Officejet Pro 8600 Plus & the fax at the end past all test report & yes I used the good cable for the phone (the one that came with the fax) However when someone calls, the fax picks up the call rather than the answering machine.

  Can someone tell me how to fix this please?

  If you get only fax from time to time, I suggest to turn off the auto answer on the 8600, and when you hear the fax tone, * #123 to tell the fax machine to pick up. In this way, you can leave your answering machine like that and do not miss faxes.

• OfficeJet Pro 8600 Fax 'answers' in case of normal phone...

  I have my Officejet pro 8600 value fax NO response.  But when in phone... via phone calls connected to the phone in the back of the printer... and the line connected to the line port... the fax machine "will answer", which is to connect to the line and interrupt the phone call, I'm... NOT when the phone rings but after a few minutes into the call.  I have to click X on the touch screen on the printer or turn it off in order to retrieve the call.  Does it randomly but quite often to be a BIG problem.  I make sure that the printer is turned off unless I need to print.

  This sounds like a defect?

  No problem.  Hope that works according to a straight line.

• HP Officejet Pro 8600 Fax (CM749a) Email problem n911a

  Hello!

  I use a HP Officejet 8600 aio n911a (CM749a) connected to a network via ethernet.

  My fax machine is currently set to 'Fax to Network Folder', but I would like to change this to 'Fax to Email. I went to the Fax tab and clicked on the HP digital Fax Wizard to try to change the 'Fax to Network Folder' to 'Fax to Email' but I cannot find anywhere how to do this.

  It only allows me to disable the HP digital fax or fax to network folder.

  I don't know if this helps, but I have configured alerts to e-mail through EWS/settings/Email Alerts, which seems to work fine. If the printer can send emails.

  I would be grateful for your help.

  Kind regards

  Osman.

  Hi Osman,

  The HP Officejet Pro 8600 (N911a) support only the digital repository (Scan or E-mail) to a network folder.

  Only the Officejet Pro 8600 Plus / Premium models provide the specific functionality.

  You can find this information in the product specifications:

  Digital sending features
      Scan-to Folder; Fax Archive to Folderhttp://shopping.hp.com/en_US/home-office/-/products/Printers/HP-Officejet-Pro/CM749A?HP-Officejet-Pro-8600-e-All-in-One-Printer-N911a&jumpid=oc_r1002_usen_c-001_r0001&lang=en&cc=us
  

  Shlomi

• OfficeJet Pro 8600 Plus: officejet pro 8600 fax network

  Hello

  Thank you I have HP officejet PRo 8600 more that has fax functionality and it is connected on the LAN (192.168.100.3).

  I need another application fax FAX talk (my laptop) to send any documents to HP officejet PRo 8600 by lAN for the fax on the actual fax modem so is HP officejet PRO.

  is this possible?

  What is the right configuration to be written in application FAX TALK? This is the IP fax, FAX port, login (username / password)?
  BR
  Ahmad

  Hi @amalla,

  Under Windows, the HP drivers are not considered a TAPI modem.

  Thank you.

• OfficeJet pro eplus 8600: Fax by internet

  I have two of these mfprinters. One is physically connected to a phone line to fax while the other is not. Both are connected to my Wi - Fi and can receive the e-print jobs from mobile sources. Is it possible to send a document from the unit who is not connected to a phone line? I am aware that I can send a job via my Mac or pc but how to do when you are in unity with a document in my hand?

  Hello

  The HP Officejet 8600 offer analog fax functions, so fax of the appliance, it must be connected to an active telephone line.

  You can scan the document on your computer, and then use a service like eFax computer fax.

  Shlomi

• New 8600 Officejet Pro N911a. Do not receive automatic fax

  Windows 7, 8600 N911a. The fax configuration is basically OK both ways and in. My answering machine has 4 rings, so I put the activation of incoming fax auto to 5 fires, as requested.

  However, to test the automatic reception setting, with old enough sending my church fax machine & put my number & waiting until what starts the answering machine message & ends did not result in the fax sent to me. However, when you push the send on the Fax button, he sent it to my printer OK.

  On my subscribe 9 2410 alumni, I used the same settings and it worked with its manual, saying that the signal of the fax was picked up for the duration of the answering machine message by the printer and then automatically would have sent the fax.

  The problem could be the age of the machine of the Church?

  8600 manual says that the message will be sent to the 5th ring, when there is not a ring 5th with a phone ring 4.

  ???

  Thanks to everyone who commented on my problem. I finally had the time to answer the question toward the end of my description of the problem whether the great age of my church fax machine might be the problem. In my Bank today, they agreed to conduct a test on their very modern machine by sending a fax to my home phone answering machine-type.

  It worked perfectly!

  Thanks again.

  BigLare

• OfficeJet Pro 8600 - FAX with ATT Ringmaster Service number

  I have a phone line with two numbers, the number of the House and with a distinctive ring fax number.  Send/receive works fine and the machine goes to sleep as you wish.

  When the house number rings, the machine out of sleep.  Is this supposed to be like this?  Whenever the phone rings of House, the machine out of sleep.

  After 5 minutes it falls asleep, as it is supposed to.  I find it odd that she would detect a ring on the home phone number.

  Thank you.

  PS - HP Support had me change the fax settings even though I don't think they understood what I was explaining to them.  After that I hung on to the top of the support, the machine responded as well the house number and the fax number.  I went back to the settings that I had done, but the machine still pop sleep whenever the House telephone number sounds.

  Also, when I turn off the PC, the display on the printer stay on all night.

  Someone at - it help with this (these) issues?

  Hi LeeSoFL,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  From what I understand, when you receive an incoming call, the 8600 fate of "sleep" mode and no matter if it's just a voice call or a fax. This is perfectly normal. As long as the 8600 is not attempt to return to the call voice then everything works without any problem. For the display remaining throughout the night, you may notice that it darkens. If you are worried about remaining on, try plugging the power cable directly to a wall outlet, if it isn't already. HP printers have built in surge protector and if you have connected it to a strip bar, the printer will not get all the power it needs to function properly and cela might be the reason why the screen stays on all night after the computer is turned off. Here is a document that explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Please let me know if you have any questions or concerns.

  Thanks for your time.

• HP OfficeJet Pro 8600: Fax spooler

  My fax machine no longer works.

  When you try to send I egt a message "spooler running configuration" for about 10 sec and then that the transmission was abandoned.

  When I run the fax test, the report states that all tests have passed.

  I then tried to send the message from another computer using the same printer, and in this case, it works.

  What should I do to solve the problem on the first computer?

  Hi Emile_M,

  Thank you for your answer!

  Please Contact HP phone support for assistance. Because they have the ability to distance in. (after you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Contact Microsoft is also not a bad idea.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!