8600 Guide

Similar Questions

• OFFICEJET PRO 8600 - I need a User Guide

  I configured the printer and used for most printing.  Now, I want to test faxing and possibly send and receive faxes.

  The 104-page Setup Guide has been provided.  This Guide refers to a 'User Guide' which I didn't with this priinter.

  I need the User Guide, please.

  Mike Eyster - [email protected]

  Hello Mike,.

  Accessible to the public user's Guide online at hp.com.

  You can find the guide to the user below, I suggest you click with the right button on the link and save it to a location of knowm for your convinience:

  http://h10032.www1.HP.com/CTG/manual/c03026243.PDF

  Shlomi

• Windows 7 Upgrade Guide for dv6000/dv9000 models

  Statement:

  You use this guide at your own risk. I take no responsibility for any problem.

  Things you need to know and do before the upgrade:

  1 HP may require that reinstall you Vista back if you have hardware problems to solve the.

  2 HP will not help you if you have software problems because these models are not officially supported

  with Windows 7.

  3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.

  4. all drivers Vista and software preinstalled by HP for your model are in the folder in C:\swsetup .

  If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.

  5 users with nVidia graphics card should check the temperature of this device before upgrading.

  In this way you will know is it works fine under Windows 7 also.

  How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

  To do this use HWMonitor (free and recommended) or Aida64.

  How do you know what model you have and the specifications for it:

  1. click on the Support & drivers link. (The upper part of this page).

  2. in the search box, type your computer laptop product (p/n) number.

  Resources:

  How to locate the laptop n/p

  3. under a portable computer image, you will find the name of your laptop model (example: HP Pavilion dv6205eu notebook PC).

  4. on the same page, click on Product Information -> specifications and you will find all the information on

  your little laptop.

  How to install Windows 7 and what you need to know during the upgrade:

  1 guide: How to do a clean Windows 7 install

  2. all drivers for Windows 7, you will find in the next post below.

  3. some drivers have comment while they are initially made for Vista system.

  During normal installation will fail, and then try to run the file unsuccessfully installed in Compatibility Mode (Windows Vista,

  Windows Vista Service Pack 1 and Windows Vista Service Pack 2).

  Resources:

  Make older programs in this version of Windows

  How to run a program in Compatibility Mode in Windows 7

  CHIPSET DRIVERS

  Solution on COPROCESSOR with yellow exclamation mark () 

  If you have Intel processor:

  Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)

  Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7) 

  If you have an AMD processor:

  For models dv60xx, dv61xx, dv62xx, dv63xx, dv64xx, dv90xx, dv91xx, dv92xx, dv93xx and dv94xx (example: dv6367am means that your model is dvx3xx, dv9421xw means that your model is dv94xx):

  nVidia Chipset (Install and reboot before other drivers) here (Vista)

  For models dv65xx, dv66xx, dv67xx, dv68xx, dv69xx, dv95xx, dv96xx, dv97xx, dv98xx and dv99xx (example: dv6981tu means that your model is dv69xx, dv9721tu means that your model is dv97xx):

  nVidia Chipset (Install and reboot before other drivers) here   (Vista) 

  Important information for users with nVidia chipset!

  If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.

  GRAPHICS DRIVERS

  Intel graphics:

  Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)

  nVidia Chart: 

  Important information!

  If you have installed all the drivers for graphics card nVidia, then until you install the other version will be

  you will first need to remove the old drivers. Check below how guide (that there is no standard uninstaller

  ( process):

  How to remove drivers Windows system nVidia graphics.

  Drivers:

  nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS:

  OPTION 1
  

  267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.

  OPTION 2

  Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.

  Note:

  Don't forget to first uninstall previous graphics driver.

  nVidia GeForce GO 6150 M, 7150 M, 7200 M, 7400 M or M 7600:

  OPTION 1

  First try installing the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  OPTION 2
  

  If the drivers will not work so try modded drivers worm 195.81.

  Note:

  Don't forget to first uninstall previous graphics driver.

  How to install Windows 7?

  1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,

  2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.

  3 install and reboot.

  OPTION 3

  Last thing you can do is install graphic driver from Windows Update.

  Note:

  Don't forget to first uninstall previous graphics driver.

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for your graphics card.

  AUDIO DRIVERS

  Conexant HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  Realtek HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  If the Vista drivers won't work well for you then try to use Realtek official a of here (32/64 bit Win7).

  "" When you enter this link check it 'I accept the foregoing." and after that click on the " Next " button.

  MODEM DRIVERS

  Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant

  Motorola SM56 modem here (ver6.12.6.0 A) (Vista) - If you have the Realtek audio card

  HP QUICK PLAY 

  HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)

  Notes:

  • It must be installed before HP Quick Launch Buttons.
  
  
  • You have installed this software and it crashes when you use?

  Uninstall your current version of HP QUICK PLAY and install what you had in Vista.

  Resources:

  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.

  HP Quick Launch buttons

  Solution on KEYBOARD FILTER with yellow exclamation mark ()  

  HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)

  WIRELESS DRIVERS

  Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)

  Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)

  Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)

  HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)

  Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.

  Note:

  How to install the Bluetooth driver?

  Click on the link below:

  How to install the driver Bluetooth HP Windows 7.

  ETHERNET DRIVERS

  LAN Realtek RTL8101 here (for 32/64-bit Win7) only for models with Intel processor.

  Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.

  CARD READER

  Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 

  Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

  TOUCHPAD DRIVER

  Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)

  Note:

  Default is activated the scroll two - finger. If you want to use only one finger to scroll, check out the link below:

  How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.

  ONLY IF YOUR MODEL: WEBCAM 

  CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)

  Note:

  If you have a problem with your webcam, check below links to HP documents:

  Solve Webcam Windows problems

  Test a Webcam using your favorite Instant Messaging

  3VRX (optional software)
  

  on the screen the images and associated sounds that are displayed and heard when volume control

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what you can do with this software.

  ONLY IF YOUR MODEL HAS: FINGERPRINTS READER
  

  1. uninstall all software and previous fingerprint reader drivers

  Check below how guide (only it's non-standard uninstall process):

  How do I uninstall the driver and the AuthenTec fingerprint software

  2 you can install now correct fingeprint reader driver and software.

  There are two apps that are available on this device:

  - AuthenTec TrueSuite

  and

  -DigitalPersona Personal (recommended).

  Information on how to install the software you will find below guides:

  AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7

  DigitalPersona Personal fingerprint AuthenTec and Windows 7

  ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE

  How can you check is your DVD with Lightscribe drive?

  The Panel of DVD, there will be a Lightscribe logo.

  

  LightScribe Host software [Link removed - Site is no longer available] (worm 1.18.22.2 for 32/64-bit Win7)

  Report of the changes that have been made in the guide

  Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41

  Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (version 195.62)

  Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host

  Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.

  Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software

  Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1

  Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)

  Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in

  Windows 7.

  Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software

  Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology

  worm 9.6.0.1014

  Published on 31/03/2010 update nVidia graphics with uninstall guide section, updated drivers for nVidia GeForce 8400 M GS and 8600 M GS

  worm 197.16

  Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software

  Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software

  Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112

  Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless

  15.0.13.3 worm

  Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2

  Edited the 24/06/2010 updated Synaptics TouchPad to worm 15.0.17.4

  Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1

  Added drivers published 04/01/2011 for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (ver. 267.76)

  Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger

  Scrolling in Synaptics TouchPad software.

  Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology

  Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install

  Driver HP Bluetooth Windows 7

• How to set the Date and time on my HP Officejet Pro 8600 Plus?

  I have a HP OfficeJet Pro 8600 Plus, and I would like to know, how can I implement the time stamp that is under my printer display screen continually Jan 00 00 00:00 a.

  Thank you

  @misslady,

  HP has gone green, here's the guide you're looking for.

• OfficeJet Pro 8600 - Macbook Pro and Macbook Air does not print

  Products:

  • HP Officejet Pro 8600
  • MacBook Pro (Mac OS X, Version 10.7.5)
  • MacBook Air (OS X, Version 10.8.2)

  Question:

  • Why my Mac initially print fine, but now will not print?

  Full article:

  I have a wireless network in my house that consisted of a 30 MB cable internet, Netgear 900n, HP Officejet Pro 8600, 2 laptops from Dell with Windows 7, a laptop Lenovo with Windows 7 and Dell with Windows 7 trick, all printed matter very well.

  The HP Officejet 8600 was added to my network about 2 months ago.

  I added a Macbook Pro and Macbook Air about 3 weeks ago.  The two Macs printed fine for about a week.  Then suddenly they stop.  I spent about 2 hours on the phone with HP's Service, and finally, they said to my router.  So I called Netgear.  NETGEAR was useless!  They wanted me to accept fees for services before they would even discuss the issue.

  As a result of information provided by the HP support service, and because Netgear will not support their product, I quickly bought a new router - an Apple Airport Extreme.

  Macs will recognize the printer will print if connected via a USB cable, but do not print wirelessly on the Officejet Pro 8600.  The fine impression CPA.

  The frustration that is felt is made up by the fact that Macs printed very well with the Officejet Pro 8600 2 weeks and now the printer shows just "idle"... even with a new router. (see image below)

  Please help, thank you very much for all support.

  As a side note, the representative of the HP Service was very friendly and definitely tried to support the HP product, which is much more I can say about Netgear.

  Thank you

  

  Hello

  More likely a problem with Multicast, which Apple devices are relies on to communicate with the device through the network.

  First try unplugging the router for 30 seconds.

  Connect to the power supply and wait 2-3 minutes.

  Turn off the HP printer and turn it back on, then check all difference.

  If it persists, try to change the configuration of your router as follows

  Note: the settings below are not related with the HP product, I provide you with the steps as a best efforts and those based only on my own knowledge. You can try to change the settings of the router at your own risk:

  1. Open the router configuration page (you'll find listed as the default gateway by clicking the icon on the printer wireless, then print a network configuration report.
     
  2. Click the Advanced tab.
  3. Click the configuration option in the menu, and then click Setup WAN.
  4. Be sure to uncheck the box Disable IGMP proxy transmission and apply the changes.
  5. Click on the LAN configuration on the same Setup menu.
  6. Set the RIP RIP-2 Version and apply the changes.
  7. Restart your router and then check any change.

  I hope that you will find useful information, you can also use the guide to the user below for more information:

  http://www.downloads.NETGEAR.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.PDF

  Shlomi

• Camera Samsung can print directly (USB) to 8500 a but not 8600?

  Hi, I have a few Samsung SH100 with built-in Wifi and for months, we could actually print directly from the camera on our Officejet Pro 8500 has more printer only via wifi.  In cases where we had to move the camera and the printer to a temporary location and had no WiFi, it would rely on the USB cable provided with the camera.  Plug it into the USB port on the front and choosing the option "Connect to the printer" on the device picture allowed me to photo printing directly from the camera (without the offset of wifi 2 minutes).  When I plug it in, it says "PictBridge" and "Device to use PictBridge for direct printing" and then I navigate through the camera to select the photos to print, etc.

  A few months later, I bought the Officejet Pro 8600 Plus think since they are only a single model apart, I would have roughly the same features.  But while the 8600 can connect to the internet and receive e-mail print jobs, when I connect the same USB cable from the camera to the front port of the 8600 I get the following error:

  "Unknown device".

  Disconnection of memory. For more information, see the electronic user guide (also called 'Help') available on your computer after you install the software.

  (I confirmed that I have the latest firmware for the printer and not that it should be relevant for our purposes, the computer to which it is connected via USB (rear port) takes place the most updated software HP).

  Any advice would help, whether it's something we can do to the 8600 or if we scour the internet to buy another opportunity 8500.  Thank you!

  -Jason

  Hi Jason,

  I'm afraid that the 8600 series does not support PicBridge, even if they are similar models there are differences...

  You can find the specifications below, PicBridge is not supported and therefore connect a cammera directly only is not supported:

  http://h10010.www1.HP.com/wwpc/us/en/SM/WF06a/18972-18972-238444-12019-3328086-4322915.html?DNR=1

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• HP Officejet Pro 8600 N911a: can not save scanned documents

  button to scan save the docs is grayed out after the scan is finished and ready to save the step

  Hi @orthoman,

  Thank you for joining the HP Forums!

  I understand that you cannot save documents scanned with your HP Officejet Pro 8600 N911a printer. I'm happy to help you!

  Please take a look at this guide, the printer Scan fails or impossible to scan allow (macOS Sierra).

  Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Hope this guide helps!

• OfficeJet Pro 8600 +: OfficeJet Pro 8600 + very slow to print

  We recently purchased a new MacBook.  From the beginning on this MacBook, our HP 8600 printer takes long time to start an extremetly to print.  Sometimes it prints ever.  The printer is set up wireless.  Sometimes the print area will say that is having problems connecting to the printer, but not always.

  This only happens on this MaxBook.  I have an iMac and a Windows laptop, both connect to the same wireless printer.  Both of these printing devices print jobs fairly quickly.

  I downloaded the new drivers.  Uninstalled and reinstalled the printer.  Restarted the printer and wireless access point.  Disabled iPV6.

  Don't know what else to try.

  Hi @JH99,

  Welcome to the HP Forums!

  I noticed that your HP Officejet pro 8600 is slow to print on a wireless connection, with your Mac. I'm happy to help you!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know the results. Although the guide title does not match your question, I think that these steps will help.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Thank you for posting!

• OFFICEJET PRO 8600 Plus: OFFICEJET pro 8600 more

  I have been using my OFFICEJET pro 8600 more for a few years with no problems until now. It is connected wireless to my network and it is unusual. I can print a single item and then it loses the connection. I have to turn the printer off and power turn it back on, then I can print another point and it disconnects again...

  very frustrating that someone knows how to fix this?

  I use Apple and PC. Same question with all devices and computers.

  Thank you

  Greg

  Hello! Welcome to the HP community @WilSwann,

  I have seen your post on how your printer is disconnect your wireless network and wanted to answer with my suggestions.

  Check out this link and try all the steps that are listed here. Normally, they help with this type of concern and hope that they will help fix yours too!

  HP Officejet Pro 251dw, 276dw and 8600 Printer Series - printer keeps no connection Wi - Fi
  
  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  If there are any problems, please let me know
  
  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• HP 8600 slow printing of diagrams and color photos

  I have a desktop HP 8600 printer pro jet and it's very very slow at the color print and diagrams (colored or not). I aligned the printer and clean the print head but it is still slow and I mean slow 2 5 minutes from printing a page.

  I also used the HP scanner/doctor and everything is fine with the printer is brand new.

  Help, please!

  Hello there bamitssam21,

  Welcome to the Forums

  I saw your slow printing problem you are having with your Officejet Pro 8600. I noticed that you have ran a print head cleaning, alignment and print and Scan Dr. indicates no error. There could be several reasons why slow printing occurs, the power of the printer for the program you are printing from (if the problem happens only in a single program) or even the pilot.

  I'll give you some suggestions to try and I hope that we can get rid of this problem!

  First, reset the printer and when you plug it back, just please make sure it is plugged directly into the wall socket. Avoid bars, surge protectors, nothing more.

  This may sound weird, but sometimes it really helps and solves the problem.

  Then, update the printers firmware: get the latest Firmware and product updates

  If the problem persists, follow this guide for printing slow: slow printing

  Good luck! I would like to know how to get you out, and if so, I'll help you gladly further.

  Thank you

• HP Pavilion: validation of the officejet pro 8600 printer failure

  I am connected to my Officejet Pro 8600, can be seen in the list of printers, I can send documents to the queue print - but when I try to complete printing, he seeks the printer and I get the message "printer Validation failed."  Help, please!  It works perfectly fine on other laptops in the House.

  Hi @CAAJ,

  Thank you for joining the Forums of HP Support!

  I see that you have installed the printer, but it still won't print. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Please download and run the print and Scan of the doctor, it will be probably diagnose and fix the problem you are experiencing.
  What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?

  If the problem persists, try the steps in this guide:

  • Print jobs stuck in the print queue (Windows)

  I hope this information is useful. Please reply to this message with the results. Good luck!

• OfficeJet Pro 8600: How to load an envelope #10 in the status bar and align it for quality printing.

  How can I charge a #10 envelope in the tray to print.

  Welcome to the Community Forum of HP.

  Series of e-all-in-one-HP Officejet Pro 8600 User Guide

  See Page 25

  Don't forget to select the media Type in your printer preferences when you go to print the envelope, so the printer knows that he has to wait for the thicker paper of your envelope #10.  This allows the printer the well-positioned rollers and ink and the drying time, too.

  Printing options

  Reference:

  HP Officejet Pro 8600 e-all-in-one printer - support N911a

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  I am happy to provide assistance on behalf of HP. I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!

• OfficeJet 8600: out of fax paper jam

  My hp officejet 8600 friends won't let his fax. It seems to jam by pulling on the first page. I was hoping if someone knew how to open the lid if possible to see what makes jam. An ideas appreciated. I did a search but the only cover printing paper jams, do not fax, (outgoing) jams TIA

  Thank you for letting me know cyberwasp!

  Try this guide instead: the ADF (ADF) documents do not choose paper

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day

• reset the clock on HP Officepro 8600

  Clock on 8600 is slow about 14 minutes. How to reset the clock on the printer?

  Bussaad,

  Welcome to the HP Forum.

  You can set the internal clock of your HP 8600 printer using the Web integrated (Embedded Web Server) server.

  The built-in Web Server provides a web server access point to the IP address of your printer - go you to the Page "" through your browser.

  Your printer user's guide , page 232:

  To open the built-in web server
  NOTE: The printer must be on a network and must have an IP address. IP address and
  host name of the printer are listed in the status report. For more information, see understanding
  the Network Setup page.

  In a web browser that is supported on your computer, type the IP address or host name assigned to the
  printer.

  For example, if the IP 123.123.123.123, type the following address on the web
  browser: http://123.123.123.123

  TIP: After you open the built-in web server, you can bookmark it so that you can return to
  It quickly.

  TIP: If you use Safari on Mac OS X browser, you can also use the Hello
  bookmark to open the integrated Web server without having to type the IP address. Use the bookmark of Hello,
  Open Safari and then in the Safari menu, click Preferences. On the Bookmarks tab, in
  the bookmarks bar section, select include Hello and then close the window. Click on the
  Favorite Hello and select your network printer to open the integrated Web server.

  ===========================================================================

  Open the support page of SAP for your printer > settings > Preferences >

  If you have assigned the EWS security access, enter "Admin" and the password you have assigned to be your EWS page >

  Date and time >

  Next to the current device time > update time as you want

  Apply

   

   

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.