8600 OfficeJet all-in-one: "device" to choose to install the HP utility
I am trying to install the HP software for my 8600 Officejet printer all-in-one. I'm at the point where installation implemented asks me to select the device you want to configure. There are two devices, which are both the same 8600 printer (have the same IP address listed in "Détails" field), but each has a different 'link' listed. A watch his connection as 'IP', the other as "Hello". Which should I choose to be the device to set up for the installation of the software? The type of connection made a difference of function? Thank you.
Hello
To get all the features like analysis select the Hello device and follow installation.
To ensure that you will be able to use all the features.
Kind regards
Shlomi
Tags: HP Printers
Similar Questions
-
HP 5740 Officejet all-in-one: fax will transmit well if the ink level is low
Can fax you on HP Officejet 5740 all-in-one when ink levels are low with a good result?
Hello
Ink level low don't effect function fax, BUT if a level of ink is exhausted/empty you cannot use the fax because the printer stops during warm-up.
Kind regards.
-
cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet
I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer. It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.
Any help is appreciated!
Hello NRHII,
Welcome to the HP Forums!
I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:
(1) turn off your printer
(2) unplug the power cord at the back of the router
(3) restart your computer
(4) wait less than 60 seconds, reconnect the power cord to the router
(5) turn the printer, wait for the computer to turn onThe wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)
- On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
- Tap the Installer icon ( ).
- Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
- Tap the name of your network and then press OK .
- If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.
-
Hi all
HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)
My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.
Is it possible to implement on this 8600 or am I missing something? Any help or ideas appreciated.
Thank you
Glen
Hi oorwill44,
Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?
Please take a look here: how Scan: Windows XP
I hope this helps, let me know if you have any questions.
Thank you
-
HP Office Pro 8600 e all in one printer wizard disappeared
I am running Windows 7, Office Pro 8600 e-all in one
Out of the blue, two laptops in the House lost priner Assistant and all of its features (fax to the folder, etc.).
Windows has had some updates for a few weeks so I can only assume it follows from there.
For two laptops, I uninstalled and reinstalled the CD and the software of latest driver on the site of hp without success.
I ran HP print and scan doctor without success.
Any help would be greatly appreciated... I am at a loss.
Hello
On the start menu click programs and select HP, then select the HP Officejet Pro 8600 folder and proceed with the uninstall.
Then download and install the following software, do not use older since the CD or software programs you can registered on the HP site in the past as the problem will remain while any previous software used:
Once you have finished, restart your PC and click the HP Officejet Pro 8600, located on your desktop.
Please let me know the results,
Shlomi
-
My L7680 HP Officejet all-in-one prints only about 1/4 of a photo. Help desk services is not a problem. Is there a solution? MHow
Hello
As OEM HP is responsible for the good operation of the printer and their drivers. Check with
HP support, their documentation online and drivers and ask in their forums.Good luck, you need to update or reinstall the latest driver.
HP L7680 - set for your version of Windows
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=2512009&LC=en&cc=us&DLC=en&lang=en&cc=usSupport HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
How to print envelopes and labels on an Office Jet Pro 8600 more all-in-one
Envelopes and labels can be printed using the paper on top of the Office Jet Pro 8600 more printer all-in-one?
If printing envelopes the lower tray, should I remove the paper from the tray and adjust the margns?
cor21911,
You are not able to print labels or envelopes of the ADF, for copying or scanning only. Also, it is not necessary to remove the regular printer paper to print on these types of media, even if it can make it a little easier. All you have to do is go to word or any other type of program allows you to print and select the appropriate model label or envelope and follow the instructions.
Let me know if you need additional assistance.
-
How can I change the font size for the printer HP Officejet all-in-One Pro 8620.
Hello
You need to change requests. Use application use?
Kind regards.
-
Have a friend who has a Canon MX 885 all in one device and when he had it in XP it can deliver direct links (instances) for each of the printers - 4 total functions. Apparently, it has been easy in XP, but it can set this feature for two instances I have 7.
Is there a limit to 7 about this function?
If this is not the case, how it has it and get 4 different photos of the MX885 in "printers and devices" called MX885-fast, photo-MX885, MX885-medium and MX885-fax.
Nothing to do with win7, it is a feature of the software/drivers Canon
See Canon support pages
-
print allignment page all-in-one HP PSC 2400 turns off the printer features
After changing the ink, trys to printer to run printerr allignment. It feeds the paper to halfway through, then hangs up with all the flashing lights. I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.
After changing the ink, trys to printer to run printerr allignment. It feeds the paper to halfway through, then hangs up with all the flashing lights. I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.
Hello
You can get a faster solution on the Support Forums of HP printer.
Here is a link for your convenience.
Printers and all-in-one - HP Support Forum's:
http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjetSelect the appropriate forum for your device.
Concerning
-
HP deskjet 3054A all-in-one scanning only 1/4 of the page
My all-in-one HP deskjet CR237A 3054 model scans 1/4 of the page when scanning my imac using Lion. I guess it's just a setting I'm missing, but I can't find anywhere to make a change.
Hello
It seems that the default scanning workflows configured to crop the image to its default settings.First, install the critical update below:
http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmgNow change the settings of the device as follows:
1 open the HP utility and select your device.
2. based on Scan Settings open the "Scan to Computer".
3. click on the tab "scan tasks.
4. Select the shortcut Scan allows to analyze, and then click on edit.
5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
6. in the expanded menu now, open the drop down next to cultures in and set as none.
7. click OK and try to scan.Please let me know of any changes,
Shlomi -
I installed the HP utility to scan from my HP Deskjet 3520 to my Mac Book pro, but the "edit scan tasks" button is grayed out. I can only scan one page at a time, but one I want to scan multiple pages
Thanks for the reply back @cjbd,
You are able to open the HP scanning software when you perform a search from the Mac?
You try to scan several pages from the printer to the Mac or from the HP scanning software?
You should be able to open the HP scanning software and edit everything from there.
Normally, you can select PDF to scan in a single file multiple documents if that's what you try to do.
Because this model only has a dish, you must be notified to scan another page.
Here is a document for digitization of the control panel of the printer: HP Deskjet 3520 e - all - in - one and HP Deskjet Ink Advantage 3520 e-all-in-One Printer Series - how to perform a scan: from the control panel.
If the HP scanning software does not work, you will need to uninstall and reinstall the software again.
I handed the document to uninstall: Printers HP - uninstalling the software of the printer (Mac).
Here is the link to the drivers: HP-inkjet ink-SW-OSX - Mavericks_v12.34.40.dmg
Please get back to me. Thank you!
-
SMART PHOTO ALL-IN-ONE C-4385: can not find the download of the printer software.
I need to uninstall and reinstall the complete software for a Photo Smart C-4385 all-in-One. I searched everywhere on the HP site and Googled it and still can not find it. Can someone help me with this? My OS is Windows Vista Home Premium 32-bit. Thank you.
Hello
Here's a direct link for the full software features for your printer:
http://ftp.HP.com/pub/softlib/software10/COL20274/MP-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe
Kind regards
Shlomi
-
The acer all-in-one A7600U-UR308 can be installed on a wall rack support/arm?
The acer all-in-one A7600U-UR308 can be installed on a wall rack support/arm?
I'll post something that comes to light. I was apparently not aware of this.
There is a montage of available with/for the Aspire 5600U wall / desktop all-in-One computer 7600U.
I can't guarantee that this part will be delivered with all systems, but it should be available to the command if it is not shipped with the system.
-
j ' have an asus x93s it does not read my dell AIO 926 photo printer all-in-one. I HAVE BEAUTIFUL DOWNLOAD THE DRIVER.CA DOES NOT WORK!
Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.
Maybe you are looking for
-
Afiter Vista BIOS Satellite M70 5.10 update becomes too slow
When I updated my Bios in Bios 5.10 Vista, my computer has become too slow (slow), even the InternetI turned in OS independent bios update worm 1.50and everything becomes good again,Note, I used win updte worm. Thank you
-
Cannot enable DirectSound for the selected device. What should I do now?
I have no sound, speakers or headphones and recently installed wxp home with all the drivers and updated and always says that I don't have a driver of its usable.
-
No sound driver and no multimedia audio control?
I clean my computer by doing a disk defragmentation, disk cleanup and uninstall programs that I don't use. Then I restarted my computer and then I had no sound at all. I tried restoring the system to get what I deleted the return, but it did not work
-
Still not too sure what happened or how it happened by the way, but when I turned on my PC today, I had the menu to choose start normally or repair starter system, when I try to start normally, the computer just as it happened to the Windows 7 loadin
-
Hi, I have been informed that the Muse is a simple tool for creating electronic newsletters/mailouts (one the Mailchimp, etc.) ... someone had such an experience?Main client is Outlook.We need to track emails.And, if possible, I would like a version