9.1 Safari stops responding to my entry

Similar Questions

• Most of the apps on my mac stop responding after that I do something meaningful

  My Macbook was working perfectly yesterday, but earlier today, most of my programs started to not respond, after doing something about them. For example, when I open Safari, everything is good, but when I look for something and you click on a Web page, uh oh, it no longer responds. Same thing with the terminal. Sometimes when I'm trying to type something in, it stops responding.

  I contacted Apple support and they said it was a problem with my hard drive, but I made many controls and all right. How can I fix? I'm getting more RAM soon if it would help me in any way to stop the crashes of programs?

  I use El Capitan 10.11.

  MacBook Pro (13 inch, early 2011)

  Processor: Intel Core i5 to 2.3 GHz

  Memory: 4 GB 1333 MHz DDR3

  Graphics card: Intel HD Graphics 3000 384

  I also re-installed OS X and the problem is still there, so I doubt it will be anything related to the software that I have not yet downloaded anything.

  PS I can't go into an Apple store. In addition, the problem is not terribly annoying, so if I leave it, which is bad, or is it crucial that I get it repaired?

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Connection Manager HP stopped responding + Windows Installer Error 1719

  I am running Windows 7 (SP1) 64-bit operating systems.
  
  Started getting an error message of connection manager HP "HP Connection Manager Service has stopped responding.  Error code 8008005.
  
  HP Connection Manager v4.1.23.1 running.
  When I try to install a new version of v4.4.10.1 (SP58930) HP connection manager, I get an error of Windows Installer 1719.  Tried different solutions recommended for this, but nothing has worked.
  
  I see in the forum after this uninstall of the current version and then install the new version of the HP connection manager can solve my original problem.
  
  Before uninstalling the currenet HP Connection Manager version, I wanted to be sure that I will be able to install the new version without encountering Error 1719.  I don't want to be in an even worse situation of not being able to the HP Connection Manager after you uninstall it.
  
  Can I get confirmation from HP that I will be able to successfully install a new version after uninstalling the current version?

  ParryJM wrote:
  

  A ran the Microsoft Fixit then tried to install it and got the Windows Installer Error 1719.

  Then uninstalled HP connection Manager.

  Tried to install the HP (SP58930) connection manager and still have the error Windows Installer 1719.

  What do you suggest I try next?

  The fact that HP Connection Manager is no longer installed, how this will affect my computer?

  The fact that it is no longer installed will have no effect on the functioning of your laptop and none on the operating system.

  HP connection manager is simply a utility assistance for people who are making it difficult for the network through conections wifi and bluetooth connections.

  If you are not in this group it is really useless.

  From your description, it seems that if you can't follow instructions in the Microsoft fixit to the letter. By using the fixit is the easiest way to remove the registry entries and make changes to the registry that will allow installing and uninstalling software.  I can't recommend the methods that I use personally when I run on these issues because they involve access to the registry via regedit. The word people have never even heard of Regedit. Using Regedit can be a very bad thing for someone not experienced in the use of the registry editor.  All ch = angels did take place immediately and which included all the mistakes made during the access to the registry. Ongoing work on an operating system can fairly easily through the registry editor. Try the Microsoft fixit. It is a safe utility. Use it after an attempt to install and leave the window open until after error that does compete with the installation of the software.

• video card error message, "nvlddmkm.sys has stopped responding and has recovered."

  My computer has an nvidia 9800 gt. Since then, a week ago that I am unable to play a video game, or use windows media center. If I ever start a video game or windows media center the program crashes and I get the error message, "nvlddmkm.sys has stopped responding and has recovered." A few times, I get a message from the blue screen and the computer needs to restart. I reinstalled the drivers and even restored software from my computer to the original factory condition. A year ago I noticed my computer screen would get dark, as if I was wearing sunglasses. I want to restart my computer and the screen would be normal again. I was wondering if my video card burned to some, and if I need a new video card. The average temperature of my videocard 76 degrees Celsius, is 167 degrees Fahrenheit.

  Hello

  The best sources of information would be Nvidia Support, their documentation online and their
  forums. Try to remove ANY power and reseating the cables (both ends, memory and cards
  When possible) - in fact, remove and replace - do not just tight. Clean the dust bunnies
  and vents. Make sure that the internal fans are working and trying to use a small fan to blow
  directly into the inlet to see if that helps.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  ==============================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Help with error: "display driver stopped responding, but recovered."

  Hello

  First of all, my configuration is a Dell XPS 7100, Windows 7 Home Premium 64-bit, the Videocard Visiontek AMD Radeon HD 6850 w / 9.2.0.0 driver version.

  AMD Phenom II X 6 cpu.

  My problem is that when I try to play a game (more precisely: Minecraft, SimCity, World in Conflict, AOE3) under Windows, the screen freezes for 5 seconds then go black for 1 second then back to the top with an error message saying:

  Display driver stopped responding, but recovered

  Driver AMD display driver stopped responding and has successfully recovered.

  This started only after I upgraded my video card to an AMD HD 5670 to an AMD Radeon HD 6850 Visiontek, which, at the same time, I upgraded my power supply to a 500w unit as AMD recommends. After that that I've updated all my drivers, deleted and reinstalled the driver video and which did not help. I then searched in all the forums about this problem and found that it is more than likely a problem with Windows power management. So, I followed the instructions on the site to change the registry data to help with this. This did not work, the same problem at the same time. I then contacted AMD Support and fairly well, they told me that it is either the power supply or windows power management which was the cause of the crash.

  I am at a loss now, I know not what to do. I have not tried all the third-party programs to try to manage the power. But if someone has used one that works or has any ideas for me to try please let me know.

  Thank you very much!

  I found a solution that helps!

  Please make a backup of the registry before making any changes in it.

  When editing the registry go to:

  • HKEY_LOCAL_MACHINE
  • then the MATERIAL
  • then DEVICEMAP
  • then the VIDEO
  • in the 'VIDEO' file, there is an entry with the title: MaxObjectNumber - REG_DWORD
  • This has a value at the end that looks like 0 x 00000006 (6) or 0 x 00000005 (5)
  • Double-click MaxObjectNumber, and an edit box appears
  • put 0 in the given value, and then click OK.

  This will disable Windows GPU Timeout detection and recovery. That she has stopped crashing on me.  The only problem is that windows does not save it and it resets after that rebooting so it must be changed every time you start the computer.

  If anyone knows how to save the changes to the registry, I would be very grateful for your advice.

• Applications (including the Finder) frequently stops responding

  I'm on an iMac Mid-2010 with 8 GB of RAM and the latest version of El Capitan.

  In the last two days, my iMac began frequently stops responding. The problem does not seem to be specific application; It happens even when I do turn to nothing other than the Finder. I'll be in the middle of a task, and suddenly everything stops. I get the rotation beach ball, and often Activity Monitor shows the current application as "not responding." After a period ranging from a few seconds to a minute, my iMac snaps out of it. Then, a minute or two later, the same thing happens again.

  What have I changed recently, you might ask? Mid-June, I installed the new software of the printer and upgraded to Office 2016; However, both worked fine for a few weeks before this new problem is surface. App Store does not show these latest updates to important day and nothing at all in the last five days.

  Activity monitor offers all the answers clearly - there is no memory pressure and the idle CPU extends from 70 to 98%.

  State SMART of my boot drive is fine, and first aid disk spots utility zero problems.

  I also went through the predictable easy fixes - reboot, reset the SMC and NVRAM.

  What else should I be looking at, or train? It is better to reinstall my OS? Or maybe it's a hardware problem (gulp)?

  If you run a utility, 3rd party utility network or anti-virus remove now and restart

  start in safe mode and see if the problem persists.

  Try safe mode if your Mac does not end commissioning - Apple Support

  If so, you can publish a report of etrecheck for further analysis.

  www.etrecheck.com

  see the following topics

  Using disk utility to check or repair disks - Apple Support

  http://www.CNET.com/how-to/how-to-determine-if-your-Macs-hard-drive-is-failing/

• I get the same message: a script on this page may be busy, or it may have stopped responding

  Since a couple of days I get the same error message: "a script on this page may be busy, or it may have stopped responding." You can stop the script now, open the script in the debugger, or let the script continue. »

  I'm not a COMPUTER expert, however, I have read similar online messages and tried many steps such as:
  --deleting history navigation and cookies
  -Mozilla resetting to the factory settings
  -Uninstall and reinstall Mozilla

  Unfortunately, the problem is always the same. What can I do? I work from home and need internet to work 100%.

  Moreover, the navigation works fine in other browsers, but not Mozilla.

  Thank you

  This script is the culprit in the following message?

  A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script in the debugger or let the script.

  Script: resource://gre/modules/addons/XPIProvider.jsm-> jar:file:///C:/Program%20Files/Mozilla%20Firefox/browser/extensions/%7B82AF8DCA-6DE9-405D-BD5E-43525BDAD38A%7D.xpi!/bootstrap.js-> resource://gre/modules/commonjs/toolkit/loader.js-> resource://gre/modules/commonjs/sdk/loader/sandbox.js-> resource://skype_ff_extension-at-jetpack/skype_ff_extension/data/jquery-2.1.0.min.js:28

• "Display driver stopped responding and recovered."

  It happens every time I try to play a video on YouTube. The audio, but the video does not appear. My laptop slow for a few seconds then screen goes black then back to normal and the notification "display driver stopped responding and has recovered" is displayed. Even after that, there is no game even if the sound is not still a Visual.

  This only happens in Firefox. Videos YouTube work perfectly well on Google Chrome.

  Hello want, please see if the problem is always present when you update the driver for your graphics hardware for the new version: http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2064#amd-catalyst-packages

• Why do I get the message "a script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to s?

  I have 3 windows firefox with several tabs in each, but the main (and sometimes others) gel and prevent navigation showing a box indicating
  "A script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends.

  "Script: chrome://fctoolbar841468a1d7f44bd384e6bb0f13a06c64/content/fctoolbar.js:1.
  To stop the script? I think it's not to do with Google Chrome but FF model internal to web pages. Thus, a deficiency in the FF, inability to cope, but with what? As far as I KNOW, all software is up-to-date. I have restarted FF, restarted the laptop, but has not changed the FF problem. What is the cause?

  This is probably caused by a toolbar that installs on your version of Firefox. Most of the scripts that begin with chrome:// are extensions.
  I think that this is very probably the Nectar Search Toolbar , which raises the question, because it seems to be the only toolbar installed on your computer.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

• 29 Firefox either will not start or stops responding immediately

  I just downloaded the latest version of Firefox and immediately found it is unstable; does plus 4 times a few minutes to update. Most of the time all I had to do was click on bookmarks and it would stop responding. Tried to look for help here and tried a few things including empty my cache, deleting cookies and by assigning clear history when it closes... etc.

  Firefox is now completely unusable. Sometimes it does not start at all and when it doesn't start it immediately stops responding completely. I have to force it to close by ending processes. I have tried opening FF in safe mode, resetting, uninstall and go back to ver 28, restart my laptop... nothing works. Guess that's because he remember my settings every time. I don't want to lose my bookmarks and extensions etc. not so remove them with uninstall FF.

  What can I do to fix this?

  Think I might have found a solution.

  AppData/Roaming/Mozilla/Firefox/Profiles - entered in the profile I'm using now (left default one) and removed the following: cookies.sqlite, cookies.sqlite - shm and wal - cookies.sqlire.

  Then Firefox started normally and would respond, allowing me to return the parameters they had deselecting 'Clear history of Firefox closing' that is to say that I read is bug in worm 29.

  Firefox now works normally, and so far has collapsed.

• My safari stop my videon on youtube

  I have problem with safari stop playing my videon on youtube does not work good work with problems.

  1. System Preferences > Flash Player > advanced > delete all the

  Press the button 'Clear all' under 'Navigation data and settings.

  Install Adobe Flash Player.

  http://get.Adobe.com/flashplayer/

  Download first.

  The next step is important.

  Click Safari on the menu bar and select "Quit Safari".

  Follow the prompts and install it.

  Restart the computer. Restart Safari.

  2. let Plug-ins

  Safari > Preferences > Security

  Internet Plug-ins > "allow plug-ins".

  Activate it.

  3 safari > Preferences > privacy > Cookies and data from the Web site:

  Press the button "delete all data from the Web site.

  Press the button "Details".

  YouTube to delete cookies.

  4 safari > Preferences > Extensions

  Disable all extensions, restart Safari and test.

  Turn over some and test.

• Select Fire FTP script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends. Script: chrome://fireftp/content/js/local/localTree.js:134

  After the last update on Firefox FTP fire does not open easily. I get this message more than once. First time I had problems with the selection of FTP
  A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends.

  Script: chrome://fireftp/content/js/local/localTree.js:134

  Try to update your module:

  • Look for new versions of your modules

  Check and tell if its working.

• Re: Satellite U500-PSU9ME - display driver stopped responding

  Since I bought the laptop, I had a problem with the display driver.
  The screen maintains the blackout and comes back once a second with the massage of display driver stopped responding and has recovered, I wish that I can attach a screenshot. The laptop has nVidia on her card.

  The dealer replaced it for me, but even with the new, he comes every day once or twice

  It's my 1st Toshiba, I've always heard they are good, but now I'm kind of confused!

  Someone had this problem and could solve it? Help, please.

  Note: I've updated all the drivers.

  Hello

  This error message may appear due to the graphics card driver failure.
  I read on a question also on different Web pages and to be honest, it s not question for laptop

  This may happen due to some problems of compatibility between the driver and software that runs on the laptop. Usually a driver update would help, but if the question seems always so you should check whether a BIOS update and a new OS installation would improve the functionality of the laptop.

  I read also some guys tried the 3-page third-party graphics card drivers and this could help what to say you can try to install a driver from nVidia but this can be done only at your peril because as much as I know non-Toshiba drivers are not supported by Toshiba.

• Error Win 7 - display driver stopped responding

  Windows 7, 32 bit, during normal use makes the sound of a detached USB device and then the screen goes black.

  After a few seconds the screen back again, but the computer responds to nothing; then the screen goes black again. This error message is displayed: "driver Intel Graphics Accelerator display drivers for Windows Vista (r) stopped responding and has successfully recovered."

  He has no option but to manually shut down the computer.
  I've updated the display driver and bios, but it happens still 3 to 4 times per day.

  Hello

  You have a Windows 7 preinstalled on your laptop

  But the error message means that:
  > Intel Graphics Accelerator Drivers for Windows display driver Vista (r) is no longer

  Seems to graphics card driver Vista is installed on Win 7 OS.

  Maybe you should remove the Vista display driver and install a graphics driver for Win 7.

  Welcome them

• Satellite L500 - display driver stopped responding and has recovered

  Hello

  I have a concern about an error in my pc...

  the error is "display driver stopped responding and has recovered."

  I had been reinstelled the windows as well as search apdated inter display driver

  but I did not...

  I appreciate all advice and guidance about this problem...

  Thank you very much

  Something like that happen on my machine, but not so often, especially when I want to see video content in the browser.
  The reason why it knows me not, but I'm worried about this until the driver is recovered and I can use my machine as usual.

  Have you noticed if there is a particular situation when this happens?
  T happens quite often or just from time to time?