9 number keys

It simply doesn't get it. I tried testerday for the first time you are trying to communicate with my answering of the carrier service, but... some keys don't seem to meet. Impossible to listen to the messages, then. What is the problem?

g.

All the system/standard you call with this function uses the same DTMF tones. It does change from system to System. If it works fine for all other functions are you need to use it, I can't say it's a problem with the phone. And there are no settings for it in the phone itself.

If you think that the problem is in the phone, I can only suggest that you perform a repair of software on your phone via PC Companion:
http://support.sonymobile.com/global-en/tools/PC-companion/

In PC Companion, you press start on the support Zone > begin on updating the software of the phone/Tablet > repair phone/Tablet (the blue clickable link in the message) > proceed without going through your device connected to the computer.

Follow the instructions that appear in the program and do not connect your device to this guide explains how to connect.

Tags: Sony Phones

Similar Questions

  • FN + number keys not working on Satellite R630

    I can't get the functions on the digital keys that must be operated by the FN button to work (control volume keys 3 and 4, etc.).
    When I press FN a menu comes up with all the F keys, but if I press FN + number key, nothing happens.

    I use a brand-new Satellite R630 (windows 7).

    Thanks for any answers

    Hello

    Do you have what key tried? The numbers at the bottom of the row of keys F1 to F12 or the numbers right on pavement?

    Exceptionally, you should try the number keys at the bottom of the row of keys F1 to F12:
    FN + 1 SmoothView scale down
    FN + 2 SmoothView Scale-up
    FN + 3 lower the sound Volume
    FN + 4 sound Volume up

  • Keyboard not typing special symbols above the number keys online, but works fine otherwise

    Original title: keyboard problem

    Keyboard not hitting that special symbols above the number keys online, but works fine otherwise. When the shift button is held and you press a number key he type the last letter, which was typed any symbol, you try to type. Keyboard worked fine before, tried another keyboard and got the same results.

    Hi Patrick,

    1. what type of keyboard you use? Is it wireless or wired?

    2. did you of recent changes on the system?

    3. what web browser do you use?

    Method 1:

    If you use Internet Explorer, you can use another web browser and check if the problem occurs.

    Method 2:
    Step 1:

    You can start the computer in safe mode with network and check if the problem persists.
    Startup options (including safe mode)

    Step 2:

    If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

    Hope this information is useful.

  • the number keys on the right side of my keyboard ar answers do not, how can I activate them?

    I have a packard bell computer and the number keys on the right side of my keyboard ar does not, how re can help them?

    Press the NumLock key

  • number keys not working not not on Dell Inspiron 3521

    my letter of the keys work and keys that run along the top letter keys work too, but the number keys on the side don't work at all, I push the number to memorize and off several times and it makes a noise, but all this every time I'm trying the numbers, it's done the page up or down, or to highlight everything that is already typed in front of her.

    I looked to see if there's a position that has the answer to the question and their share, I tried fn + f3 and alt + shift + numlk but it did not work.

    both and discovered what it was that I had to "use the numeric keypad to move the mouse on the screen" in mouse easy access, just had to turn it off, and I was good to go

  • change serial number key to Windows 7 Home Basic Windows 7 pro

    How to change serial number key to Windows 7 pro to Home Basic to Windows 7 without loss all files and personal data?

    You must clean reinstall Windows 7

    He was a popular workaround to versions of change , but has not been working lately, so it may have been prevented.  But you need to back up your files, because the files should always be supported against failure hard drive if you care for them at all, and especially during the repair or reinstall operations.  So if you do this, you might as well do the Reinstall much higher.

    Stick with the steps, tools and methods in the wiki of blue link and you will have a perfect installation that will stay that way as long as you do.

  • Number keys do more change opacity in the Brush tool.

    I have always used the number keys to set the opacity of the Brush tool.  All of a sudden it now flows, not affect opacity.  At the same time this functionality has changed I started having to click a mask for the [] keys change the size of the brush.  I used to be able to change the size without selecting the mask.  I inadvertently change some setting?  I'm using CS5 12.0 x 64 on Mac in 10.6.8.  Thank you!!!

    You're probably mode airbrush-style. There is a switch in the Options bar.

  • Pavilion 15: number keys on the keyboard does not

    I obviously made some changes with a result that the keypad does not work and I do not remember how to activate them. help please

    Hey @frederickw1,.

    Welcome to the Forums!

    I understand that the keypad does not work. You mentioned that you have changed a few things. I'm here to help! I also changed the settings before and lost the use of my pad. Here are a few steps that can help.

    Please make sure that the NumLock key is pressed while the button lights on your keyboard, which indicates that it works.

    Please, start your computer in Mode safe. The numeric keypad works in Mode safe?

    If the keyboard works fine in safe mode, then I suggest that do you a clean boot to see if another program blocking the use of the keyboard (How to perform a boot in Windows).

    • Right-click the Start button
    • Go to the control panel
    • Go to ease of access
    • Click on change how your keyboard works
    • Remove the turn checks on the keys area rocking. (This should stop your laptop computer to beep when you press the NumLock key).
    • Press OK.

    If there is a check next to mouse keys:

    • Get him out.
    • Press OK.
    • Test the keypad.

    If there is NOT a check next to mouse keys:

    • Please check the box
    • Press OK.
    • Test the keypad.

    Here is a document you can try troubleshooting not called Portable keyboard troubleshooting (Windows 10: 8).

    This answer doesn't solve your problem or answer your question? If so, please share the good news! Inform others that this answer was helpful by clicking on the button accept as a Solution . You can also show your appreciation by clicking thumbs-up.

    f you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems.

    Thank you for agreeing!

    Forward to your response.

    Have a great day!

  • Number key pad vs QWERTY?

    I am trying to add a shortcut through the side number of my keyboard (which is a LogicKeyboard - for AppleLogic) you can see here 'record' a small icon noting it is 3 through the keypad.  but when I announced "1 and 2" for Protools style FFF and RR there is now number icon and adding it to the "1 and 2"for numbers and QWERTY 1, 2... very STRANGE!

    In the mac system preferences you have selected extended keyboard?

  • HP dv5 1002nr: mobile caps and the number key at the same time blink once

    I was doing some updates on the computer when the power of the battery is dead and when the power cord I had a black screen and the caps and digital key will appear to blink once at the same time. I upgraded the operating system about 1 months ago for Windows 7 and it works fine until the updates have started to update.

    Hey there @Masen2016!

    Thanks for the reply as on caps and numlock lights blink once each time.

    This indicates that it could be a problem with the processor,

    And you cannot pass a processor on a laptop as the system in the BIOS configuration is written in.

    If you upgrade a laptop part would be a malfunction.

    So, you can contact HP and get the machine.

    Link to contact HP: http://hp.care/2bkTGBQ

    Have a great day!

  • No number key on T440s?

    I'm only enter data digital and discovered that there is no on the new designed keyboard num lock key. Also, it has no description on this subject in the manual. I put something to use? Can anyone help?

    Thank you both of you. I fixed my problem by using hotkeys =]

  • 8060 cm does not start, but I think that number key may be stuck!

    Hello

    One of my machines had problems and I managed to get back to factory default and now it will only fuel but does not start (it may be the mode of PMS, but not sure).

    It gives me the opportunity to connect, but as soon as I do a load of asterisks appear in the box constantly as if a button is pressed, do not know if a button is stuck, I see not one, but that's the only explanation I can think.

    I have actually managed to type the password for the service the other day, because it doesn't have AutoFill, but I was so surprised and thought it was settled I started and I tried again, but now it will not happen again...

    Any ideas?

    Concerning

    Andy

    You cannot use the USB without the functional printer, the main firmware is to put the machine mode of loading the firmware and help push the CDFT-L firmware, this should be a low-level operation that can be done even if the two hard drives are erased.

    The system has a base charger for this OS, I you sent the link of the CDFT-L then maybe if you can connect up to on this, you will be able to push the firmware.

    If you have a hard drive with the operating system and then when he put system will check and the firmware for the 2nd disk of mirror as a back up.

    It might be possible that you could take a hard drive on your 2nd 8060 and put a new, check its load to the top and everything works, then put that hard drive in this, see if it recognizes the problem and auto load the blank disc?

    I'll be honest, I don't remember if I did that, I recall messing about with hard drives and firmware but it's been a few years.

    In theory, it would load the firmware is programmed for automatic formatting and configure erased readers, if that does not work then you may need to change the serial number etc, but that shouldn't be hard.

    I would not use a car of this machine in the other, I would watch a disc blank, just in case there is anything on the old disk that is the problem? Maybe I'm just paranoid but if I tried this I would get a blank disc, install it in the printer and then continue if everything was fine.

    Tag readers with a pen so that you know what are the components that we have mixed all readers in the room during the training.

  • Shift + number keys not giving expected symbols

    At first, I thought that my new keyboard was messed up. So, I went to a back brand new to my old. And I still have the same problem. Whwn I hold the SHIFT and the key 2 on my keyboard, it supposed to do the sign right @.

    Is not... instead, he does this '(a parenthesis). Even with Shift and 3 keyboard, it's a slash instead of the usual pound sign.

    However, if I want to do the at sign, I you hold the ALT key and then press 2... See... @

    As for a question mark key... I can't even it works. Something is messed up here and its very annoying. I need my old ways of striking back. Can someone help me thanks in advance.

    Dan

    * original title - you just bought a brand new HP computer... provided with Windows 7. My Shift key will not work... *.

    Sounds as if you have selected a non-English input language. Control Panel, region and language; also check if your new keyboard has a selection of available language that may need to be changed.

    writing in the new message: * e-mail address is removed from the privacy... *

    At first, I thought that my new keyboard was messed up. So, I went to a back brand new to my old. And I still have the same problem. Whwn I hold the SHIFT and the key 2 on my keyboard, it supposed to do the sign right @.

    Is not... instead, he does this '(a parenthesis). Even with Shift and 3 keyboard, it's a slash instead of the usual pound sign.

    However, if I want to do the at sign, I you hold the ALT key and then press 2... See... @

    As for a question mark key... I can't even it works. Something is messed up here and its very annoying. I need my old ways of striking back. Can someone help me thanks in advance.

    Dan

  • Number keys changed alphabets

    I was trying to buy something online and when to enter my credit card information when numbers suddenly passed letters keys. After having played a minute or two, I plugged it in another keyboard, but it's the same thing. I left the page and returned, but the problem persisted. In the end, I gave up, closed chrome, waited a minute and returned. I was then able to complete good...  I don't know what caused it, but everything is back to normal now.

    Everyone knows what...?

    Hey,.

    I can understand your concern.

    This may be due to any dispute of third party software.

    Next time, when this happens try different browser or place your PC in a clean boot state in order to verify any conflict.

    Clean boot:

    Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

    How to perform a clean boot in Windows

    Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

    I hope this helps.

  • CTRL + Shift + number key combination does not work

    I can use Ctrl + Shift + [A - Z] very well, but Ctrl + Shift + [0-9] (main keyboard, not the numeric keypad) does nothing. I checked for access keys but don't see active at the level of Windows.

    Clown fish was the culprit. It must be turned off completely. Just by disabling shortcut keys don't seem to work.

Maybe you are looking for

  • Swollen battery

    I have a Macbook Pro 2010 and the battery began to swell, obviously I didn't screw and I ordered one online, after a week when I got the screws and removed the battery that's how I found the battery. I wonder who could be dangerous. I do not have the

  • Two Roaming PC (domain) must share a USB printer.

    Hallo all I have two PCs that need to share a USB printer. PC 1: Win 7 Pro, roaming profiles user (domain)PC2: Win XP Pro, roaming profiles user (domain) These two PC will be used out of the site and will not be connected to the domain. Users must us

  • My question is, why I am receiving the old updates in windows update?

    I installed SP1 & SP2 one after another of the Microsoft site, after restoring my computer to its original settings, and now I get this old updates in windows update, are not they suppose to be in the SP1 & SP2? What should I do? THANKS :)

  • Desktop icons can be seen on the desktop, folders are not able to be open, content is not visible; File save option does not work!

    Recently, I tried to re - install samsung smarthru mfp program (already installed and working except the scan). at the end of the reinstall the Office is empty, desktop wallpaper and all records of icons could not be seen, I wasn't able to use window

  • Activation error: 0xC004C003 (stuck key)

    Recently built a new system, installed 64-bit Windows 7 Professional and got the error code above during activation. I have the diag, I noticed the Volume MAK and guess that's my problem? Diagnostic report (1.9.0027.0):-------------------------------