9320 constant restart blackBerry smartphones after trying to activate the Bluetooth

Similar Questions

• Blurry text blackBerry Smartphones after trying a new font

  I have a Torch 9800 with the latest S/W updates.

  I was playing around with fonts (what I had done before with no problems) and I tried a few extremes (plus sizes larger and smaller, etc...). When I made a size 5 with BBCasual the text under my icons have gone blurry. Almost like a bad printer (bleeding on bad paper). I went back to what I prefer (San BBalpha 9 ft) and they are still unclear. This includes text while in the establishment, contact list, etc... The icons have gone very well. It includes everything except the text in the top bar with date, time, 3G, etc... which is always superb. If I go on the web, it is fine as well.

  I tried a soft and hard (drums) restart with zero luck. I tried to resetrting the default fonts, then a hard reboot. No luck.

  Everyone has experieinced this? Any ideas? Thanks in advance.

  Read this post, pay attention to the last two messages on page 2.

• BlackBerry Smartphones has tried to update the device software, now unable to connect to the device via USB

  I tried to update my 8100 to the 4.5 software.  I first updated the desktop to 4.7 software, then tried to update the device, but the process has failed.

  Now, when I open the Desktop Manager it shows not connected to the device.  I can go to the properties of the device mamager and select the balckberry, but when I return to the destop eat it says no device.

  It seems that whatever I do, it does not recognize the usb device.

  The display on the 8100 is company information only text, no graphics or by phone, and it is virtually unusable.

  There are options on the screen for some applications, but if I choose them, it says app not found.

  Is there a way to force an update to it?  Or I poohed this phone?

  Thanks in advance

  Edit:

  I pulled the battery on the device it reboot and tried to return to a former Office Manager Update

  1. unplug BB from USB and PC. Restart the PC turned off completely.

  2. for BB, you'll charge back to the theme that was used on the device when you upgraded, which will normally give you a black and white screen. You must follow the instructions below.

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

• BlackBerry Smartphones has tried to upgrade the OS to 4.5, now brick?

  Hi all! I'm new to BlackBerry devices, and last week, I bought a unlocked Curve 8320 from eBay. I really loved. I jumped ship from an iPhone because I was tired of not having certain characteristics. I came across an update for the OS version was 4.2. I wanted to go ahead and get upgraded to 4.5. I consider myself an advanced and proficient computer user. Currently, I use my MacBook, so I pulled up from Parallels and installed Vista on a virtual computer. I found an article on the upgrade and got the update 8320M_PBr4.5.0_rel108_PL2.7.0.78_A4.5.0.81_Rogers as my carrier is AT & T and the phone was originally locked to T-Mobile. I guess I didn't have the update from T-Mobile as I feared that could re - lock the phone (please, correct me if I'm wrong but, as I do not know this for sure). I have saved everything and began the process of update with Desktop Manager v4.6. Everything seemed to go well until the point that it seemed he was installing the new software.

  Now my BB is glued to a black and white screen, at the top "Platform BlackBerry 2.7.0.78" is written and there are some applications written in text just below. Address book, alarm, calculator, etc. If I try to click on one of them, I get an error or another. Desktop Manager is no longer able to recognize the device and MissingSync on OS X tries in vain to connect and synchronize with him.

  I have my iPhone to fall back on now, but anyone can guide the in how I could restore it to its previous state or get the DM to recognize if I can retry the upgrade?

  Hello and welcome to the Forums of Support BlackBerry.com.

  I didn't update from T-Mobile as I feared that could re - lock the phone (please, correct me if I'm wrong but, as I do not know this for sure).

  Who will be no way, once unlocked, always unlocked and nothing can change that. Similarly no matter WHICH carrier OS for THIS model will work, as long that delete you the vendor.xml file before the upgrade.

  Your BB is very probably not brick. First of all, I recommend unplug BB from USB and restart the Mac and then reconnect the BB to the USB port, then running Vista, reopen DM and see if you can log in again.

  If this isn't the case, I recommend that you find a friend with a PC.

• Error message blackBerry Smartphones while trying to save the Docs to Go

  
  

  Try it now. It will work. The Web from Dataviz site declined until 22:00 Eastern.

• After trying to install the updates. my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.

  Visa update problem

  After trying to install the updates.  my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.  I tried to follow the instructions provided here because it seemed to be the same problem.  But when I restart and hold down the F8 key so I can boot into safe mode, I tried selecting safe mode and I get the same results, and I tried again by selecting the option 'Disable automatic reboot' which seems to be an option on the same page with the option of safe mode.  Whatever it is, the same message comes back and I can never get to where I can see my desktop to click 'start '.  I can't get out of this cycle.  I installed the update because it said I needed to install it.

  *************************************************************************************************************************************************

  Turn off your computer by holding the power button for about 20 seconds.
   
  Start your computer in safe mode: press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears
   
  Disable the automatic restart in the event of system failure:
   
  • Click Start
  • Click on Control Panel
  • Click on system and Maintenance link.
  • Click on the system link
  • In the left pane, click Advanced system settings
  • Locate the startup and recovery area, click the settings button.
  • In the startup and recovery window, uncheck the box next to automatically restart.
  • Click OK in the startup and recovery window
  • Click OK in the System Properties window
  • Close the system window
   
  After that... While STAYING in safe mode I do a system restore and maybe try a manual install of the update later.
   
  For the sake of space I refer you to the article about how to proceed.
   
  System restore
  http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx
   
  Windows updates: http://windowshelp.microsoft.com/Windows/en-US/Help/8f259118-0d61-4c7a-8c56-24987e87a8171033.mspx
   
  Please let us know if this solution works for you

  Theresa
  Microsoft Answers Support Engineer

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• BlackBerry smartphones remove all entries from the calendar

  Hallo,

  I use a BB 8520 and want to delete all the entries in the calendar (default calendar). The option "replace all entrances to terminals" in DTsoftware does not work - I changed the calendar by default - and all the entries are addes to the pre-existin entries.

  Thank you for your help

  François

  Hello

  From your post, I'm not at all sure that you actually tried that did not work. Therefore, see:

  • Article ID: KB10167 How to clear data from the BlackBerry Smartphone user

  This is the process to clear any user databases out of the unit. If this does not work, please be explicit about exactly what measures you try and exactly how they work.

  Good luck and let us know!

• BlackBerry Smartphones synchronization events created on the device

  Hello!

  I have a Blackberry Curve 8900 and use Entourage 2008 on my Mac for notes, calendar, and contacts of sycning.  Everything seems to sync both ways very well - outside of calendar events created on the device.  They synchronize with Entourage.  In addition, the changes I make to an event on the blackberry is not updated in Entourage.

  Can anyone help?

  I recently bought a Blackberry Storm 2, and I use Entourage 2008 and installed the Blackberry Desktop Manager. I had a few problems just getting up and running together. But now that's happening, everything seems to work fine schedule and even create events on the device. When I sync appear in Entourage, although they do not have a category.

  Have you checked iCal to see if they are be synchronized with the Entourage calendar in iCal? This may seem Basic, but have you checked the calendar section of the Blackberry Desktop Manager to ensure that the menu "add events created on the BlackBerry smartphone to" is set to the Entourage? I don't seem to have any other option, but I thought to ask anyway. Have you checked the advanced settings in the Blackberry Desktop Manager to synchronize all events?

  I create a calendar on the device event and had the address send using one different address other then the first email address for the device and for some reason any event do not synchronize. When I create a new event, however, the address to send it to the help is on the default.

  The only problem I seem to have is if I change the status of an event on the device (from busy free for example), he gets twice in the Entourage, but even in the event new status is still set to busy.

  I hope this can help you.

• Hi, I just bought Adobe Acrobat Pro DC. I used the link that was sent to me to download. But the download was not successful. After trying 5 times, the system says, now I downloaded too many times and has refused to let me download it again. It's someone

  Hi, I just bought Adobe Acrobat Pro DC. I used the link that was sent to me to download. But the download was not successful. After trying 5 times, the system says, now I downloaded too many times and has refused to let me download it again. Someone from Adobe is reading this? How can I get this fixed a problem? Thank you.

  Download Acrobat products | Standard, Pro | DC, XI, X

• G9 - 791 tried to activate the AHCI in the BIOS, killed for laptop

  Since I've upgraded to a SSD, I tried to activate the AHCI in the BIOS mode, just like I did with my Alienware laptop.  After changing the setting and restart, I was unable to boot the system (it's ok), but also unable to get into the BIOS to change it back to the RAID.

  Which led me to return the laptop to the place where I bought it and get a new, still under warranty.  Is there a reason any BIOS gets damaged when you change this setting?  I'd like to use the AHCI mode instead, but I can't afford another laptop brick.

  I got it! I actually downloaded and installed the most recent Intel (14.8.XXX), and then changed RST 4 setting in my registry to reflect the changes of the AHCI. Restarted without enabling AHCI in the BIOS, to make the site everything was still good. Perfect. Return restarted to the BIOS and activated ONLY AHCI. Does not all other parameters. Rebooted (twice), and everything works!

• No license showing when trying to activate the creation by using the student account.

  Trying to activate the first Pro CC with student account. I should have a license to use this program until next year. Help, please

  Please see the links below.

  • Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
  • Applications creative Cloud back in test mode after an update until 2015 for CC

  Also, make sure you use the right adobe ID to log in.

  Hope this will help you.

  Kind regards

  Hervé Khare

• System hangs if Linux tries to activate the PCMCIA device

  Hello
  I have a Toshiba Satellite M30X-118 with dual boot Windows XP and linux Suse 6.3 System pro. The problem is with the on board, pcmcia device during installation and start-up when linux tries to activate the pcmcia device, the system hangs... Please if anyone has the same problem and found a solution please share it with me

  Thank you

  Hello

  I'm not a great teacher of Linux, but I found some good sites on this topic.
  Please visit these sites:

  http://pcmcia-cs.sourceforge.NET/man/PCMCIA.5.html

  http://www.buzzard.me.UK/Toshiba/index.html

  http://newsletter.toshiba-tro.de/main/index.html

  Best regards

  Good bye

• I have to restart my computer every morning to activate the keyboard and mouse sometimes.

  I have to restart my computer every morning to activate the keyboard and the mouse

  Hello

  1. What do you mean exactly by activating the keyboard and sometimes the mouse?

  2 are you using the keyboard or mouse wired and wireless?

  3 since when are you facing this problem?

  4 you made any recent changes?

   

  I suggest you to give us more information about the issue so that we can help you better.

   

  It will be useful.

• I had a lic 3. copy of windows 7, I used only 2 lic. I tried to activate the third today and failed.

  I had a lic 3. copy of windows 7, I used only 2 lic. I tried to activate the third today (06/25/13) and failed.

  Original title: activation error

  It is not uncommon for users who have a 'Family Pack' of Windows 7 to find that the 3rd install does not activate.  You should be OK, but you will have to activate by phone.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com