9500 series: 9500 series start

The cycles on the printer to start with the HP logo and each of the lights coming in order, including in the light of the error.

Off and reset several times but nothing helped - please help!

I guess that the printer is connected via a network cable and very probably the printer has a 610n or 615n network card.  The first thing I would do is with the power off, remove the network adapter and then turn on the printer and see if it's ready.  If the network card has gone bad.  Report for instructions on how you can be able to fix the card yourself.  If the printer does not use network card remove it, with the power shuts off and turn on the printer to see if it's ready.  If still a problem, you can again with the power off, remove the formatter that is where the cable is going to connect the printer to the network or the computer.  Reinstall the memory chips on the Board and put it back in the printer and turn it on and see if it's ready.

Tags: HP Printers

Similar Questions

  • Satellite L100 series starts the error message

    I have a Satellite L100 series PC laptop I've had for a few years now and he's got a problem. When I boot it it goes as far as the windows loading screen then flashes blue for a mili second then restarts. I try to start safe mode, and it produces a long list that has the following text:

    Multi (0) Disk (0) rdisk (0) partition drivers then sys various titles of files. After that it appears for a minute or two then restarts again.

    I searched the web to find what is the problem and the general answer that I can find is that the hard drive is faulty. I also found that the BONE may need to reinstall I try first before buying a new hard drive.

    My question is this:

    Can anyone confirm that this is the hard drive which is a failure?
    If Yes, is this the right hard drive for the L100 series laptop PC: http://www.ebuyer.com/product/145130

    Any help is very appreciated.

    Thank you very much

    Hello!

    Yes, it could be that the HARD drive is faulty.
    So I would check this with a special tool.

    http://www.HitachiGST.com/HDD/support/download.htm#DFT
    With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
    On the same site is a user's guide if you want to know more.

    Good bye

  • my laptop hp dv5 with windows vista home premium series starts do not

    my laptop hp dv5 series with windows vista home premium not starting not, despite several presses of the power button that only a white screen appeared only to nd 2-3 seconds then the system crashes.all started last night, when the electrical connection cut (no battery attached to the laptop). in the morning when I tried to start it, the led light of the charger pin on the beds for laptop for about 6-7 seconds nd then turns off. When I pressed the power button with the connected charger pin, it does not start, BUT when I joined the battery wid, the light (power) led to turn it on mobile to the top but the led on the pin of the charger turns off after a few seconds. SA is NOT SHOWING anything on the SCREEN EVEN AFTER PRESIN F11 etc please help

    Hello

    Power outages often lead to problems of material with computers / laptops.

    If there's nothing on the start screen (HP Logo, etc.) at startup, you may have a hardware problem.

    If under warranty contact HP.

    If this isn't the case, under services, contact a repair shop, local.

    See you soon.

  • A few questions about Satellite M series Starter

    Hi guys,.

    It is the story of my computer.

    He used to have video problems then they changed the motherboard. It happened about 2 years ago.

    It worked fine until recently it just started in place.

    It started with a stop randomly down. He did this a little sound "zoom/zip" and the power is just out.
    After that, I turn on the computer, but nothing on the screen, and I only hear the fan classes.
    After that, when I turn on the computer, it shows the startup with device selection screen. Sometimes I can choose HARD drive sometimes it freezes right here.

    Also, if it helps, the computer laptop doesn t it if I have only the power plug in it. I need of battery and power cord.

    Any ideas? I tried to take the power and restart after. Still nothing.

    Thanks in advance

    What model of laptop do you have? It is important that you know.

    It's not easy to say what is causing the error. It could be RAM, motherboard and CPU. In your case I would test the RAM with Memtest86. You can download it here [www.memtest86.com].
    Try it and post your result. Then we'll see if it s the RAM or not.

    But to be honest, I think it's a motherboard problem but check RAM first.

  • HP PAVILION 700 C SERIES - STARTS DO NOT

    Dear body,

    Please advise!  My office won't start do not. It shows on my screen of destop "logon - user profile Service service user profile can not be loded"

    Please I need your support!

    Hello

    You can try the following.

    Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours before the opening of the session the question first and then do the restore.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

    Another option if the above does not help is as follows.

    Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

    Kind regards

    DP - K

  • Satellite Pro L series starts with the error message

    Someone played with the BIOS or whatever on my laptop.

    Now, I can't get beyond the log in screen safe mode (black and white) and the error message that oxoooooo7b OXF7A8E63C OXC0000034 rises.

    I can not find discs to reboot or something else and don't know what to do to solve the problem.

    Any help will be most appreciated, because I'm really at a loss for what to do for the best, that I don't know much about computers as of how put the right problems like this.

    Hello

    You can try to repair the system.
    Switch on and press F8,
    Now, you will see the advanced boot options:
    Here you can choose the option: last known good configuration

    If this option does not help, restart the device and press F8 again.
    Choose the first option: fix my computer
    Here, you can choose between different options.
    You can enable Win 7 to find the problems and fix automatically or you will use the Toshiba HDD recovery option to restore the entire system.

  • HP pavilion g series laptop: hp pavilion g series starting or admin password

    I'm locked out of my phone and now as soon as I press the power button it asks me to the administrator or the power the password and after 3 attempts, is for me a blocking system 54175937 code... is their a way to remove this password... any help would be greatly appreciated

    @Willallred83

    Enter: 41853319

    Kind regards

    DP - K

  • Want x 360: Envy x 360 2015 does not Nvidia GTX 930 m - GTX 900 Series starts more graphics

    I custom ordered a urge to 2015 x 360 with a 930 m gtx and my laptop has been using Intel HD 5500 graphics out of the box. The BIOS has no option to configure the startup graphics that I could find (even after an update of the BIOS via the HP software/driver update page). The 930 m is detected and works correctly, but is not the startup graphics and the only program I can get to actually use the GPU is of Nvidia Geforce experience. Am I missing something here?

    EDIT: I've also updated my Nvidia drivers on update driver from HP site.

    After doing some research at my local Best Buy turns using the onboard graphics (in my case Intel HD 5500) as the graphics to boot and then using the dedicated adapter to run specific programs is a common practice. 4 laptops, I checked with Nvidia cards, each of them are configured in the same way as my laptop (with integrated as the main graphics card). I'm guessing it's done to save on food for greater autonomy.

    The reason why I was frustrated was because I was getting extremely high CPU usage while video game, so I assumed the problem was with my GPU. The only thing I have not tried changing has been my browser. Chrome was the real culprit here, so mystery solved. Chrome used around 45% of my CPU fo the same video Internet Explorer used about 6%. I'm still with this problem with Chrome, but I'll go and call this graphic boot BIOS problem solved.

  • Link to graphic images and display the same image on two different series

    I create a brochure DIN A5 landscape (l x h - 210 x 148) that has two pages each Board. Now, I want to connect two graphic frames on two different series (starting page 4 continued on page 5) to display the same image. This image is then next to each other after printing.

    Please take a look at the photos (situation and endresult).

    Could you please help!

    Thank you!

    Phil

    CURRENT situation

    link-image-to-another-page_1.jpg

    endresult

    link-image-to-another-page_endresult.jpg

    It is not clear to me that you understand that you should be setting this up as a file "facing pages" where each page is half of a spread, not the full-spread by page you started with. In order to impose the pages must be independent of each other in the file.

    From the screen shot it seems that when folded your book will be A5 landscape format, so if this is the case, you will want to set up as faced with pages A5 landscape. Guests will have a single page for the first and last pages, and the rest will be displayed as two-page spreads, just like your reader will see them. Given that this seems to be a folded booklet, you should also keep in mind that the number of pages should be a multiple of 4 - two sides of two pages per sheet.

    To a printer you will probably offer a PDF file, exported as a single document with individual pages in the reading order. If you want to print yourself, InDesign has a module simple integrated tax called booklet print in the file menu.

  • the PCI Express 3.0 GT 640 work in my Pavilion Elite m9340f?

    Hello

    My 9500 GS started screaming and I need to replace. A GeForce GT 640 2 GB 128 - bit DDR3 PCI Express 3.0 x 16 recommended, but there PCI 3.0 and I want to know if it will work ok.

    I have temporarily replace the original map with a 210.

    Thank you

    Bill

    bigbillh wrote:

    Hello

    My 9500 GS started screaming and I need to replace. A GeForce GT 640 2 GB 128 - bit DDR3 PCI Express 3.0 x 16 recommended, but there PCI 3.0 and I want to know if it will work ok.

    I have temporarily replace the original map with a 210.

    Thank you

    Bill

    Hello

    Yes, it will be. PCI x 16 3.0 is backward compatible with the old x 16 versions.

  • Satellite A100 PSAANE: need of Modem driver for Windows XP

    Hi all

    Please help me
    I have the XP operating system.
    I have not found the Driver Modem...

    Thank you...

    Hello

    I can't believe that! Have you checked the page European driver of Toshiba?
    I chose your laptop Satellite A100 PSANN series starting from the download form and I found the XP modem driver. Again, where is the problem? The XP modem driver is available for you.

    I think you should also take a look at the installation instructions document.
    You will find a driver the installation order that is important!

    Good luck

  • Satellite L30-134 PSL33 - Question about the version of the BIOS and the type of DVD writer

    Hello!

    I bought a Toshiba L30-134 PSL33 the week last in Hungary. I recorded to Toshiba international warranty, so I saw that my cell was made the 19.10.2006.
    My friend bought the same laptop (Toshiba L30-134 PSL33) too (also in Hungary), two weeks ago. His machine was made on 19.12.2006.
    It's already funny, but that's not all.
    My laptop has a series number starts with X, and the machine of my friends has this starting with Z. That's ok.
    But here it is...
    I have a BIOS version of 1.3 and my friend has a BIOS version of 1.9! 0.6 gap within two months? Why?
    The other thing. I have a DVD burner called Mat * a UJ - 841 S and my friend has a LG 4082. Once again: why?
    If you are looking for Toshiba BIOS update you don't find anything! It is very interesting. There must be some updates to the BIOS, because I read here to another topis that someone has a BIOS version of 1.4. But there are 1.9 too.
    Each book was brand new when we bought.
    Any idea?
    Let me know when you bought your laptop, what BIOS version it has, and what kind of DVD player there.
    I'm wainting for the answers, because I'm really interested!

    Thank you
    Marcell

    Hey Arnaud!

    I m from Hungary, too, but I think I should speak English on this forum :) So here is my notebook, I ve bought on 24.12.06. :

    Type: L30 - 134 PSL33E
    The machine was made on: 19.12.06
    Series: starts with Z
    DVD player: LG
    BIOS version: 1.9

    You should t be nervous on the drive, the carpet * a Panasonic, and I think that s as good as LG. Why are they different? I put t know, maybe Toshiba was such at the time. In the specifications I didn't seen anything on the drive type, so I think that s not relevant. I t has not found another version of BIOS for this model, so I t understand too why and what are the differences between the versions. But if you n t have a problem with your machine, you do not need to change the BIOS. This isn't a PC, if you haven t many options to change in the BIOS.
    If you want to discuss on the laptop on the Hungarian language, I recommend the Toshiba section on www.prohardver.hu.

    Best regards
    Abel

  • Of FTDI FT232R hangs / freeze randomly LabVIEW

    Hello.

    I created a program to display and record humidity and temperature sensors using the FT232R of FTDI chip (http://www.ftdichip.com/)

    I used to build the DAQ.vi example 1 FTDI, which can be downloaded here: http://www.ftdichip.com/Support/SoftwareExamples/CodeExamples/LabVIEW.htm

    The DAQ.vi with the fact that I have a problem is attached here.

    What is happening is that from time to time (may take 10 minutes or can last 10 hours) the program suddenly crashes / gel, and to resolve I have to unplug and connect the USB cable to the FT232R. When I did, the program starts working again, but I lost all the data of the gel time.

    Anyone know this problem using FTDI chips, or has an idea of what could be the problem? And there at - it an easy way to know if the bug is hardware or software?

    I have appreaciate help!

    NB: I know the attached .vi isn't waiting time between writing and reading, but I had the same problem when you use so the waiting time.

    Hello

    You have not included the SubVIs in your program.  Therefore, it is difficult to guess what could be the problem.

    As he is a serial device, I suggest you look into the viewfinder of the example to the example of the series in read/write.  You will absolutely need a delay any between send a command to your device and receive a response.

    Method of determining that your data is "ready" is to use the byte to Port property node.  http://zone.NI.com/reference/en-XX/help/371361H-01/lvinstio/visa_bytes_at_serial_port/

    Communication series starter and troubleshooting help here: http://www.ni.com/white-paper/4049/en

  • Difference between DAQ and DAQmx for acquisition of data PCI 6534

    Hello

    I use the PCI DAQ 6534 card for my digital I/o transfer. I am beginner in the labview.

    I want to store the data coming in memory and the reading of the data at the level of the trigger.

    I have seen the examples in the labview. Some have used DAQmx and DAQmx read write that screws and some have used the confg DIO port and all...

    So I want to know the difference between these two. For my application that I use?

    Hey Bo,

    First of all, I would recommend that you discover the NI 6533/6534 for NOR-DAQmx help. You may be able to find some of your answers in this help document. Now for what you try to do in your application, it looks like you are only buying data. If this is the case, with the 6534, the device acquires data in memory shipped as soon as the DAQmx series start task VI, as long as you don't start hardware triggers have in place. If you have a trigger of starting material, then will make the purchase of the aircraft after the DAQmx start task VI and only after you receive this material trigger. If you call not the DAQmx Read VI, then the data will be stored in the memory board for you, as the driver manages this data in the on-board memory storage, until reading DAQmx VI is called, which at that time, data is transferred to the Board of Directors in the memory of the computer. Once you get it in the computer's memory, you can do whatever you want with these data, as this graph or treat. If you look at the sample programs (which have been mentioned on how to find those in a previous post), you can find an example that little shows you how it works. One of the examples that you can check is called reading Dig Port-Ext Clk.VI. In this example, it sets up to read a finite number of samples and then starts the task. If you set a breakpoint on the line of the error after the VI begin, the data will be acquired in the amount of on-board memory. Then when you cancel the break of the VI, data will be extracted from the amount memory embedded in the memory system with the reading VI DAQmx. Again, the pilot takes care to put the data in the memory board for you once you start the task.

    I hope this helps. Please let us know if you have any questions or concerns about this issue. Also, certainly, discover and try to run all the programs related to the 6534 examples so that you can learn how the equipment works and how to use features to do what you want your program to do. Also, be sure to read through the help on the 6534, as well as the help of VI documentation to learn what makes each function. Thank you and have a nice day.

    Kind regards

    DJ L.

  • Media Player 9 does not work

    As soon as my Media Player 9 series starts, I get the error message 'Media Player has encountered a problem and needs to close. I followed the instructions to fix this 330332 and MS 555494 numbers, but doesn't work. My operating system is Windows 98.  Is there anything I can do to solve this problem. I have little knowledge of computers. It is a new problem. Before that, it worked fine. Thank you. Bruce

    It shows you have some corruopted file. try the system restore and if that doesn't work, try reinstalling WMP!

    Windows 98 is really old. Its time to upgrade your computer I think!

Maybe you are looking for

  • Satellite A300-1EG - driver Webcam open fail after Exchange of motherboard

    All greetings. Recently took the laptop with the service center, it changed the motherboard. Before the service center the camera worked fine, but after taking early displays an error "Webcam driver open fail." Restart the computer or the camera. "Re

  • Audio PC does not?

    I don't have any sound on my pc since yesterday!

  • Windows 7 recovery disc - where is it?

    Hello I've had my laptop for 20 months now... apprently only a 12 month warranty but the EU law says it has to be a 24 month one. Anyway I need my Windows 7 installation disc I need to re - install windows 7, and used to come with new computers and l

  • Security of dtek blackBerry Leap on JUMPING?

    Hello I am considering buying the jump, however, it does not seem to enter in charge with Dtek (as on Priv and DTEK50). Is it possible to load Dtek on the jump? Thank you!

  • Random BSOD win32k.sys 0x3b

    Hello! Bought a new computer and installed Win7 64. I do not get on a BSOD a week and it seems to be completely random when it happens. So far, I tested with memtest86, Furmark and chkdsk without error. You can find the dump files 3 here: https://www