9550 java programs Simulator does not

Similar Questions

• Problem with deployment on Simulator ("program file does not exist")

  Hello

  I currently have a problem with a project, I can't deploy it more in the Simulator: I always get an error "the file does not exist.

  The project itself can be compiled without any isse. I can also deploy the application on my phone without problem. But when I'm trying to deploy on the virtual machine, it says:

  Program file does not exist
  /Users/..../HFR10/arm/o.le-v7-g/HFR10 not found
  /Users/..../HFR10/arm/o.le-v7-g/HFR10 not found
  /Users/..../HFR10/arm/o.le-v7-g/HFR10 not found
  

  # the application is called, HFR10...

  What is strange, is that it looks at the folder "arm", which does not exist when I compile for the virtual machine since the architecture should be "x 86"... ".

  In the x 86 folder, I can find the compiled application...

  I tried to update the descriptor of bar:

      
         armle-v7
         HFR10
      
      
         Qnx/Cascades
         armle-v7
         HFR10.so
      
      
         armle-v7
         HFR10
      
      
         x86
         HFR10
      
  

  And modified the Simulator-Debug field that used to point to the folder 'arm '...

  but after a cleaning + reconstruction, I line have the same error, and he always looks inside the arm folder...

  No idea of what the problem is? This problem appeared when I moved from momentic 2.0 to the 2.1 beta...

  But I guess that he changed something in the configuration file, because even if I go back to momentic 2.0, I still have it exactly the same problem...

  Thank you!

  UM... In the dialog box "edit configuration", I spend 'use the workspace settings' to "Enable auto build" and it works to restarted...

  

  It's strange, the application was already built and available in the x 86 folder...

  In any case... Perhaps it would be useful for someone else...

• Checking update Java plug-in does not show latest version after update same

  Checking update Java plug-in does not show latest version after update same

  You exit and then restart your browser after Java update in order for the right version of Java to display the Plugin Check page. I felt it necessary to do so.

  See also:

  • Article on Java Mozilla - https://support.mozilla.org/en-US/kb/use-java-plugin-to-view-interactive-content
  • VΘrifier versions on site Java - http://www.java.com/en/download/installed.jsp

  Other - you should check your Plugins and update as needed.

  • Check your Plugins - https://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in, version 11.6.7.637 (aka Shockwave Player. Not the same as Flash/Shockwave Flash/Adobe Flash Player)
    • http://KB.mozillazine.org/Shockwave (mozillazine.org seems to be down at the moment (12/12/2012 11:34 am PDT), try again later)
    • Download, save, exit/close all browsers, run the installation program you just downloaded - http://get.adobe.com/shockwave/thankyou/
  • Adobe PDF plugin for Firefox and Netscape 10.1.4 (Adobe Reader 11 is the current version)
    • https://support.Mozilla.org/en-us/KB/use-Adobe-Reader-plugin-view-or-download-PDF-files

• Email and Services of MDS Simulator does not not on Windows 7

  Email and Services of MDS Simulator does not not on Windows 7

  Finally, resolved. There is no need to edit the file of commands or anything else. Everything you need to install Email and MDS Services Simulator and simulator of Smartphone in C:\Research In Motion instead of C:\Program Research In Motion.

  Best regards

• Simulation does not stop in the Loop Simulation & control

  I'm working on a settlement in a loop of control & Simulation. I created a State space model and an inside observer.

  Now, I've implemented nearlly all, but now the simulation does not stop.

  First here is a picture of the .vi when it still works:

  

  But this isn't the end result, I want to have.

  I want to connect the output of the subtrahation (2 x - y) at the entrance to the exterior product.

  You can see from the image below:

  

  If I do, my continious simulation and never stops. The simulation time is always set to 10 sec.

  The .vi is attached. I hope someone can help me.

  I don't understand your suggestion. I've set up a node of your comments, but this does not solve the problem.

  But I found another solution to the problem. I build the .vi completely new and used the arithmetic of the design group Signal and control Simulation. The gain block and the summation block works better in my case that digital add and multiply the blocks. Now, the tracks of the simulation and the regulation works well.

• Installation of windows 7. Install says that I must remove anti-virus program that does not appear in my program list? __

  I am trying to install windows 7 Home Premium on the Visa.  Setting up tells me that I have to remove "Kaspersky Anti-virus".  It is, I don't have any listed program like "Kaspersky Anti-virus" in my programs.   I have an my ISP anti-virus program, however, does not Kaspersky.  I got anti-virus turned off when you try to install windows.   Anyone have any ideas?

  Hi algrant,.

  Welcome to the Microsoft Answers site!

  during the uninstallation of Kaspersky products such as Kaspersky Internet Security, Kaspersky Anti-virus , it leaves some files on the computer and is not completely uninstalled. But you can remove it completely using Kaspersky remover tool. Download the tool and remove the program completely. Search using your favorite for more information search engine.

  After uninstalling Kaspersky, also turn off the Windows Firewall or any other third-party firewall and then start the installation.

  You can download the Kaspersky remover tool from the link below:

  http://support.Kaspersky.com/FAQ/?QID=208279463

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• (XP): cure for Add Remove Programs tool does not, error msg: "DllRegisterServer entry point was not found.

  [(Windows XP) looking for a cure to issue:]

  ["Add Remove Programs tool does not open, cannot access area Add Remove programs on the control panel."]
  (After typing regsvr32 mshtml.dll then press Enter :)
  met the following error message:
  "mshtml.dll was loaded, but DllRegisterServer entry point was not found.
  This file cannot be saved. »
  How can I fix above error message?
  -Alan.

  Hi Alan,

  ·         Did you do changes on the computer before the show?

  ·         Are you referring to an article in Microsoft?

  Follow these methods.

  Method 1: Follow the following steps:

  (a) click on Start, run, type cmd and press enter.

  (b) in the command prompt, run these commands:

  regsvr32 Jscript.dll

  regsvr32 Msi.dll

  regsvr32 Oledb32.dll.

  regsvr32 Msado15.dll.

  regsvr32 Mshtmled.dll

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 3: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• simulation does not work

  I composed a few diodes the wizard of components, such as the diode acts like a switch perfect to 0.7 volts.  For some reason any SPICE simulation does not run.   If I include one of these diodes in other circuits, the circuit will not simulate.  The diode model is the problem.   Any ideas how to operate?  Attached is the file multisim

  Thanks in advance!

  "- Checking SPICE netlist for perfectbridge - Thursday, February 5, 2015, 11:51:34-"
  = SPICE Netlist verification completed, 0 error (s), 0 warning (s) =.
  Model 'diodeperfect__perfectdiodes__1': 'IS' parameter must be greater than zero
  doAnalyses: incorrect use of the parameters of the model
  Cancelled simulation. "

  So: right-click on one of the diodes, select 'Properties' - 'Value' tab - press "Change model" button - box 'Use default' for 'IS' - press "Change all 4 elements" - press "OK".

• Some shortcuts to programs ar does not.

  Some shortcuts to programs ar does not. Said the program has changed or been deleted.  Program exists and is in the right place. Malwarebytes, games and almost all uninstal programs are affected

  Hi Di1855,

  Remember to make changes to the computer before that happened?

  Step 1: run the fixit available in the link below to fix broken desktop shortcuts problem

  http://support.Microsoft.com/GP/system_maintenance_for_windows

  If the problem persists,

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• PlayBook Simulator does not start in vmware.

  I had just installed sdk playbook and Simulator on windows 7 and configure the Simulator on vmware.

  But the playbook Simulator does not start on vmware... He simply display the splash screen...

  Do you have another computer to try out it?

  For example, in my case, I have 3 PC. Two of them the Simulator installed and worked well, the third, no matter what I do I can't get the Simulator to go beyond the start screen.

  I even took a suspended version of the Simulator everywhere for my 3rd machine, and it has run for a little while so locked up when I tried to activate the mode of development. However, VMWare works perfectly for other sims installed on this machine (but with VMTools installed in the virtual machine), then it is not a VMWare question by itself.

  Personally, I think that unfortunately for certain combinations of hardware/OS simulator simply does not work.

  FWIW my 3rd machine is underpowered with only 2 GB of ram, an Intel ATOM (z520) processor and a GMA 500 GPU which are pushed along Windows 7.

  HTH - Rufus

• Search programs and files does not work: when I try to look for things in windows 7 slot search files and program it does not display anything

  When I try to look for things in windows 7 slot search files and program it does not display anything

  Help

  Hi girls NMS.

  Try to run the next Fixit:

  Fix Windows Search when it crashes or shows no results

• By double clicking on a file in Windows Explorer it only starts the program it does not open the actual file.

  By double clicking on a file in Windows Explorer it only starts the program it does not open the actual file.  1 program, all the others still work ok.

  This option is used to work, I installed a viewer of this program option (it's a based CAD program) and after that I uninstalled the viewer that he would not even start the program, he was trying to launch the viewr.  I noticed that the file association was still for the Viewer so I changed it back, but he now throws only program.  Under right click, properties, file Type: it is said the extension only where it used to say the name of the program.

  Thank you

  Sam

  Hey Sam,

  Default configuration program.

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  If this does not work, then contact the Help Viewer support.

  All the best!

• I have already uninstall the program but does not control panal icon

  I have already uninstall the program but does not control panal icon

  Hello

  Thanks for posting the request in the Microsoft community!
  Before troubleshooting, provide us with information.

  1 are. what program you referring?
  2. you receive an error message on the computer?

  You can try the solutions and check if the icons are removed from the control panel.

  Method 1:

  Run the fix it and check.
  http://support.Microsoft.com/mats/program_install_and_uninstall/

  Method 2:
  This could also be a problem with the virus. You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Method 3:

  If the previous step fails, check if it has all the facilities waiting on the computer using the registry.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Empty registry key "InProgress".

  Check the following registry key:

  HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress

  Empty/rename "PendingFileRenameOperations" registry key

  Check the following registry key:

  HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations

  Just reply with the results. I'd be happy to help you more

• Profile does not show that I have a paid subscription. Need to download programs and does not give me the option of.

  Profile does not show that I have a paid subscription. Need to download programs and does not give me the option of.

  If your cloud subscription does not appear on your account page, https://accounts.adobe.com/ , and then click Plans & products at the top, you need to contact Adobe for support hours

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Sliders on my muse adobe site are visible when I discovered the site in the browser within the program, but does not show up on published site

  Sliders on my muse adobe site are visible when I discovered the site in the browser within the program, but does not show up on the published site.

  explorersglobalfineart.com

  How can I rectify this?

  Thank you

  A large number of files in your site seems not to be on the server. If you use file > upload to FTP host, please repeat the process and select Download all files. If you use file > export as HTML and download with an FTP external program, please repeat the export process in an EMPTY FOLDER and then download everything that has been exported to your server.