96% battery status shows 35 minutes remaining

Similar Questions

• Apple still has a spare battery for Macbook late 2008 13 "aluminum unibody? My battery status shows the service battery. I have reset the alert status about 6 months ago, but he will not be reset again. Thinking I need a new battery Apple

  My battery status shows the service battery. I have reset the alert status about 6 months ago, but he will not be reset again. Thinking I need a new battery Apple!

  Batteries are no longer available on the Apple online store but can be at your nearest Apple Retail Store, you must check with your store. A better option is probably buy one yourself and replace it. Buy a quality like this http://eshop.macsales.com/shop/apple_laptop/batteries/MacBook_13_Unibody battery

  Avoid imitations cheap as those who are sold on auction sites.

• the power in the system tray icon does not show me the remaining battery time

  I bought a new battery for my inspiron 1420 and the power in the system tray icon does not show me the remaining battery time, it indicates the only remaining percentage. My battery earlier showed. Can someone tell me how to show the remaining time. Thank you

  I force install quickset once again, but I installed the support center and once my system has been restarted, he began to show me both but I'm not sure, this is because the installation of support center. Thanks anyway

• The battery takes only 10 minutes and portable life time stopping randomly.

  I have a laptop Toshiba Satellite with Windows Vista. I got it for about 4 years, and since a few weeks ago my battery life has declined rapidly. Once it is fully charged, I unplug the unit and he said that I usually have about 13 minutes remaining until I have to reload. The battery used to last nearly 2 hours. 20% remaining capacity, my computer is asleep at random and locks. I have to wait a few minutes and then press the power button / stop and type in my password again. I already have my plan of the battery power as "Power Saver" that increases the battery life. I was prompted to change my setting of peak power, which I did, with no result. Here's what my settings are:

  Critical battery action: sleep (cannot change this)
  Critical battery level: 1%
  Low battery action: do nothing
  Low battery: 3%
  I changed numbers autour and nothing seems to work better than anything else. I'm really angry at the short battery life and falling asleep randomly. Can anyone help? Should I get a new laptop or just a new battery?

  Hello

  4 years is a long time for a battery and degradation that you see is expected.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• BlackBerry BB Z10 Z10 stops when the battery indicator shows about 35%

  Z10 BB stops when the battery indicator shows about 35 percent without any warning. Does not illuminate until the charger is plugged. Immediately shows charge remaining 40% +.

  Please advice.

  Stephen

  Hello

  Here is a solution I tried after lookng through various forums and type of works for me. A common thing in most of the solutions is to take the battery and sim card out, leave like this for 1-2 hours and put them, I found back in and turn it on. I'm not sure of the logic behind it, but I remember reading that this overshadow the phone battery problems (connected incorrectly - essentially a reset) and begins to charge.

  I tried it 2 days back and I see that it worked for me, at least until now. I cross my fingers.

  I hope it's useful, works at least for few of you.

  Thank you all for the suggestions.

• Battery status icon

  I lost the battery status icon in my taskbar (right). One that shows the percentage charge etc. How can this be restored on my ThinkPad R500

  If it's something that just happened in your current Windows session, then restarting may well bring back.

  If this isn't the case, then click on start-> all programs-> ThinkVantage-> Power Manager. When Power Manager opens go to the tab options and tick ' display gauge of Power Manager in the task bar.

• 5th generation iPod Touch battery drains in 20 Minutes

  HEy, I got my iPod almost 4 years (since Christmas) and in approximately the first year I noticed the battery was not well kept and in 2014 (when I got my iPhone 5 c), I decided to stop using my iPod because the battery lasted about 45 minutes. Since then, I just used my iPod, (todo only occasional updates) and even for that was probably a year ago. Now my iPod battery only lights up when it is cool and it's terrible. I used to overload my iPod when I was younger, without knowing the effects, but I do not see why my battery got worse when I have not used a lot. I don't know what to do with my iPod now, to sell it or what, because it sits on unused buffet. Any ideas on what to do?

  There is no way to overcharge the battery, so you don't have to damage it by doing this. But the battery needs to be "exercised" and when you leave the use who killed the battery. You need to replace.

• Why does a minute remaining on download for two hours

  Recent upgrade of OS was arrested at a minute remaining for two more hours. Is this normal or a problem?

  Give it more time.

  Installation can be perform tasks that are not included in the count.

• IdeaPad Y500 battery status always led ON

  Hi, I have Ideapad Y500. There for 2 months I use it. I keep the charger connected always using 100% charged. The present battery status light on the left side of the base of the laptop is turned on for a few days, even if I unplug the charger from the socket. Why is this happening? Is this due to the excessive load? Help, please...

  Hi KrishnaFT9,

  Welcome to the Community Forums of Lenovo!

  Always on battery indicator indicates that the battery has a sufficient charge to power the computer and when the indicator turns red means that the battery needs to be recharged, it is the new type of indication and it is normal and there is no need to worry.

  Publish us back for other queries.

  Best regards

• write a binary file per day / / show the minute samples of 1 in 1

  Well guys, I know how to write a binary file...

  u run your program... Put the name you want the binary and writes...

  but now I have to write a binary file per day... How can I do?

  I do a follow-up on the tension and current... and I want to write the RMS of each day

  2009-09-09, 09/10/2009, 11/09/2009

  can someone help me with this?

  ------------------

  Another issue is that, in this program I monitors 3 voltages and currents 3 all the time... and show it to a customer via TCP/IP

  I want to know... How can I show this... every hour or every minute...

  I have 3600 samples per second... so I need like integrate and show every minute media... or second... or time... not ALL THE TIME... the value changes so fast that I can still see this... put a (ms) waiting work... but I need see the tensions and current than in a time like 1 of 10 in 10 minutes or 1 minute...... How can I do?

  Thank you guys!

  I'll download the vi and sub - vi so that you can better see what I'm talking about!

  
  

• Lenovo Y 410 - battery doesnot - shows 100%, but dies when disconnected

  Hello

  I have a Lenovo Y410 model, purchased in Nov 2007.It was my mobile favorite and best I've ever used.

  Only since the last morning, suddenly, the battery doesn't work.

  On power options the battery meter shows 100%, but when I unplug the power supply, the laptop dies instantly stops offshore.

  So, click Properties, it shows the battery details and said sound plugged in as well.

  I read some of the sons like resetting the battery indicator / voltage etc. control / battery replacement?

  Someone help me please...

  MARK_LENOVO has help everyone. If you're still here could you please help me.

  This problem happened to my other laptop (t41p) as well. So your help is very appreciated.

  Thank you much in advance.

  See you soon

  Dheeraj.

  battery flat, buy a new one.

• Battery status values

  Hello:

  I got my Atrix a month ago, I had with 1.26 and I realized that when the phone was not plugged in, the battery status would say 'not charging', but now, after I upgraded to 1.83, I realized it now says "unload" when the phone is disconnected. I tried the API and everything and I discovered that the possible values for this field are:

  Unknown
  Does not charge

  To carry out

  Load

  Full

  But what I didn't want to say these fields, is there a negative sense in the performance, or is it the same as not charging? I worry especially because I get a reboot once a week (I checked the forums and it's somewhat normal, but anyway)

  Please if anyone knows, I would be very grateful if you shared.

  Thank you

  jorgejams

  When your phone is turned on and sitting in standby mode, it will be 'discharge' or using the battery. If it is plugged in it will be "load". If it has connected and fully charged, it will be 'full' and if it is hooked up and loads but not complete, it will 'recharge '. Unknown occurs when the phone cannot determine what it does. I'm not sure "do not load" but I guess you might get this message if the phone cannot be charged.

  Mark

  Support Forums Manager

• Status.Show disable the click?

  I have a simple script and I am trying to use a Status.Show to display a window on the screen. I want to keep the active area until the ESC key is clicked.

  I run this box to a background thread, and I can't understand it.

  It seems to work if the user clicks on the information area will be null on clicks on the screen and will keep the information on the screen box. However, when the box appears first if the user clicks anywhere on the screen outside of the box it will close the box.

  How can I keep the box open even if the user clicks outside of it? I use this code below

  Status.show(String.valueOf(_defaultMessage),Bitmap.getPredefinedBitmap(Bitmap.INFORMATION),10000000, Status.GLOBAL_STATUS,true,true,0);
  

  I don't think its possible using the dialog box.

  You will need to write your own custom dialog box by extending the Dialog class.

• I can't the battery status in the job prompt.

  I use Workstation 9.0.2 on a Ubuntu 12.04.2 host a Windows 7 and Ubuntu 12.04.2 comments. It is all running on a ThinkPad X 230. The guests were created when I had version 9.0.0 installed Workstation.

  I check title 'Report battery of guest information' for both hosts and started their. The guest OS do not seem to detect the battery.

  As a note, I have noticed battery reporting does not when Ubuntu eventually removed the path/proc/acpi/battery/BAT0 obsolete in favor of the/sys/class/power_supply/BAT0 way. I just guess that is related and perhaps Workstation leans on the proc file system and not the sys file system.

  Thank you.

  Hi AlanaA,

  Thanks for the detailed post.  It is exactly as you describe: my computer battery status relay functionality needs to be updated to use sysfs on modern Linux hosts.  We have an internal bug filed report to follow up this issue.

  See you soon,.

  --

  Darius

• Battery Dell Inspiron N5110 shows 3 minutes but this last up to an hour.

  I use Dell Inspiron N5110. I use the original dell and charger battery. When the battery is fully charged. Just after 2 minutes it shows the battery. It decreases very quickly. When he reached up to 3 to 5 minutes of the end. but in fact it lasts almost an hour. but it keep say remaining 3 per cent or 5 per cent remaining, it is question of battery or do I need the bios update.

  Hi asupc,

  Thanks for posting.

  There are more experts available on the Forum of the laptop that can help with this question, however, I can try to answer here.

  Normal is between a year and 18 months. Here is some information about laptop batteries that you might find useful.

  If you are still under warranty, your battery will be covered by the warranty on the equipment you bought your computer. If this isn't the case, you can buy a new Dell, parts - People.com or Discount Electronics.  Be careful with the Chinese "knockoffs" as they would have been the cause of several fires.

  If you need assistance, please contact me private.  Thank you.

  Kind regards
  Robert