9800 torch Touch Screen and Trackpad problem

Similar Questions

• the home of Windows 7 Desktop with touch screen and the problem is "not authentic."

  I have a windows 7, but lately its been said that is not true and that I have a counterfeit. A person or an HP agent will be able to help me or guide me in this process of solving this problem?

  According to Microsoft, Windows activation is valid during the initial Setup.  If you change the device, it can falter, because it will do a periodic test.

  (1) if I have activated Windows, why is Windows on my computer not authentic?

  Genuine Windows is a recurring process that checks your product key to ensure that it is used with the material, he has been associated during activation. If the product key appears as not authentic or not valid, it is likely that the product key is used on another computer or is a counterfeit.

  (2) I need to activate Windows after making a hardware change?

  Perhaps. When you make a significant hardware change to your computer, such as upgrading the hard disk and memory at the same time, you may be required to activate Windows again. For more information, see Activate Windows 7 on this computer.

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.

• HP Pavilion PC 11-n010tu x 360: update Windows 10 - touch screen and Rotation works not

  Hi, I wonder if anyone can help?

  I upgraded my Windows PC 8.1 to Windows 10.  Since the upgrade of the touchscreen / screen rotation functions are no longer available or work.

  I noticed that the touchscreen HID device is not installed and I think the same for the rotation of the screen.

  Installation / upgrade didn't / Dopes not recognize that the device is a touch screen and model when checking windows itself declares there is no stylus or touch input available for this view?

  I remember a similar problem with the upgrade of Windows 8 to 8.1.  Can anyone suggest how the features of screen rotation and touch screen can be restored?  He was under the rpevious windows version?

  Any help is appreciated.

  Thank you

  Loaded the latest drivers from HP today and the problem seems to be resolved.  Operation of toch screen is back.  Screen rotation is back.  Thank you HP.

• Using the touch screen and the touch pad at the same time on Windows 8

  How can I use my touchpad and my touchscreen Windows 8? I use Acer and it seems that whenever I get I have TO use the touch screen and my cursor is non-existent. I'm sure there will be a setting I can change to be able to use both at the same time, but so far I can't find answers online or elsewhere.

  Help, please!

  Hello green,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the model number of your PC Acer laptop?

  Thank you for your query details.

  I also like the fact that you want to use the touch screen and press the key at the same time.

  Unfortunately, it is not possible. However, you can use touchpad of precision which uses a variety of touch gestures to get around your computer. Touchpad different gestures are provided in this article.
  Reference:
  With the help of a precision touchpad
  http://Windows.Microsoft.com/en-us/Windows-8/touchpad

  You can also make changes to its settings to adjust the duration that your touchpad stays off as you type so that you can avoid accidentally tapping the touchpad with your thumb and move the cursor.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Are the touch screen and the LCD on the Acer Aspire V5 - separate 122P?

  Dear members,

  I broke the touchscreen for my Acer V5 - 122P when the laptop has fallen. I'm trying to find out how I can have it replaced. How much should I order? The LCD works but the touch screen is not. The touch screen and LCD are separated? Alternatively, they are integrated? I'm not a computer person, so please excuse my ignorance.

  Please notify.

  Kind regards

  SIPO

  [under the direction of privacy - please do not transmit personal information]

  Yes, the touch screen and LCD are integrated.
  Now, regarding the resolution of the issue you have with touch screen of your laptop, we recommend that you contact your support center closest to Acer authorized as there was physical damage to your touch screen. This will give you a better idea of the intensity of the damage that has been caused to your laptop and help explore a suitable resolution for the same.

  Learn more about the location of the nearest support center Acer authorized, you can contact Acer support via the following link:
  http://us.Acer.com/AC/en/us/content/service-contact

• BlackBerry torch Smartphone touch screen and Smartphone password

  Hello!

  I activated the smartphone password to lock my bb when I try to unlock the mobile by the keyboard to touch screen, I still get a wrong password error! If I use the keyboard, everything works fine!

  I tried to update the software (I have the latest version), tried to recharge the mobile, to restore the operating system... But still the same problem!

  Thank you in advance for your help!

  Ana

  I bet you think that it is in numbers on the keyboard, while they are letters.

  don't forget to use a number your must hit the ALT key first

• BlackBerry 9800 Smartphones Touch screen does not

  as mentioned in the subject

  am having a problem with my torch 9800 sensitivity to the touch screen does not work. I tried formatting than her apps, but still nothing is happened

  also it restarts automatically several times and it is the fact that it is difficult to do something to solve the problem of the screen

  Please I need your help for this problem

  Try a battery pull if you please, with the BlackBerry device powered on, remove the battery 15 seconds and then reinsert the battery to reboot the device. This will clear all hide as restarting a PC. Then try again and see if the problem persists.

  What OS are you on? On your device, type a new message MYVER and a space after to see and report please.

  On device, go to Options, device, application management is a great way to see what your applications with your use of the CPU on Smartphone. Simply drag bar greater than CPU and see what happens. Also touch the CPU menu to see other time variables. I discovered that an application has been eroding CPU cycles on my own

  Disable Compression on the memory card? go to Options, device, storage

  using a custom theme? Try it for a day that factory by default to avoid your theme

  remember the ESC key to close most applications, with the exception of GPS and some chat clients. other applications must use the menu and then exit or close. The key furthest to the right is a key to the House and does not close on its own apps, but will put an end to the calls.

  If the above does not work then maybe in running a new OS is in order.

  Manual device OS upgrade instructions:

  1. start by searching for your operator and the system operating file that you want to use.

  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  2. make a backup of your device first, using Desktop Manager > backup. Close at the end Office Manager and disconnect it from BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/

  3. download the OS files to the PC then install on the PC by running (double click) the downloaded file.

  4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."

  5. This step is not necessary unless there is a problem on the next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a full backup), then after you get the 507 error (no OS installed) then proceed to step 6

  6 remove the internet connection for PC and reboot the PC.

  7. plug the BlackBerry and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file was in.

  8. If you did step 5, restoration of the back upward. Follow this KB if necessary http://www.blackberry.com/btsc/KB10339

  Take advantage of the new operating system.

  If after all this then maybe you have a problem with your device and will need to contact the place of purchase if under warranty still.

• Samsung series 5 ultra touch screen tactile intermittent problems

  Hello

  Windows 8 is already installed when I bought the computer. Now sometimes when I boot it the touch screen does not work. The computer seems to think that this isn't a touchscreen, even in the PC info it says that there is no button or a pen. When I restart is always seems to fix the problem and then to the PC info, it says full touch support. I have to restart it almost every time I turn on the touch screen to get.
  Any ideas?
  Thank you

  The problem is probably Fast Startsup, faster PC boots, but all drivers do not always load but they will when you restart.

  Disable Quick start, your system will take more time to start, but it should solve your problem of dual-boot.

  Go to control panel > hardware and sound > Power Options, click on choose what the power buttons do, under stop settings, uncheck quick start if there is a check mark in it.  When you perform a cold start it will slow down the startup and touchscreen should take effect, but as I said, the start-up will take a little longer.

• Satellite L650-1EQ - black screen and overheating problems

  Hello

  I have a problem with my laptop Satellite L650-1EQ.
  A few days ago my laptop was overheated quite often.
  I would like to start playing a video game and the computer could actually turn off after 10 minutes of playing it.

  I realized that this was getting serious so I stopped using my computer to play games and I decided that I need to clean it. However, I was looking for online on how to clean up my computer and then my screen turns white!

  I didn't know what happened and was very scared.
  I turned off the computer.

  The next day I turned on the computer to see if it was good, and the screen was black however the laptop power light comes on and I hear the vents work.

  I turned on the computer and tried to start it again, and the computer started fine.
  The image appeared and the problems disappeared.
  But I knew that something bad was about to come so I took the laptop computer repair technician.

  I told her what happened.
  He has used the vacuum to "clean" the dust of the computer and told me to go back if the computer kept a overheating.

  I restarted the computer again when I came home, and after an hour and a half the computer screen turns white but I don't think that it overheated. : s

  I tried to start the computer and the screen is black, no picture, the only light on is the power one and I hear the vents work. I tried of transformed market but now it just stays as if it were now.

  I tried on another computer for solutions such as the battery and pressing the power button for 2 minutes and other things, but nothing has worked. I don't know what to do so I decided to create a thread to get answers: s

  Please help me, thank you!

  PS: I'm sorry for my English, I know that's not the best

  Hello

  This does not sound very good boyfriend. I'm afraid that there could be some sort of dysfunction material Mr. something like the problems of graphics card or motherboard issue.

  You can try plugging the external monitor to the laptop just to see if something would be visible on 2nd screen.
  But if nothing will appear on the 2nd monitor, I think that the chip of the graphics card died :(

  Of course, this is just my personal opinion and a laptop computer technician must check the laptop to know what part of the laptop could be faulty.

• HP ENVY 23 23 - d160qd: how to enter the bios on a touch screen and wireless keyboard

  I had a HARD drive crash and cannot enter the bios as the machine has wireless keyboard and touch screen. The power led lights up red on Board of the touchscreen lights on / off power, hard drive works, reader lights turned on and off. The USB ports seem to work and I have a light on my USB to RS232 device.  I did pulg a USB keyboard and hit the F10 key at startup and still no change. Make a bootable disc after Microsofts statement and it seems wook, but with a screen can't confirm that.

  I need to enter the bios to set up to boot from the usb port and I need to deal with this rear screen too. all cables, I can see are connected and a new hard drive and the hard drive are not load anything down that I can see.

  @Dan45L

  I'm glad to hear that it is resolved. I was checking regularly after your last post to see if there was an update. I got the impression you were in your previous messages set motherboard.

  Of course, I know what you mean about how things are. Many things change in one form or another, but the basics of troubleshooting are fairly constant. Eliminate the possibilities and drill down to the cause.

• Separate the touch screen and mouse entries?

  The concept was to allow me to run the procedure step by step videos, scan emails and follow the tides on the secondary touch screen while playing my games on the main screen. What I see is that the touch input screen seems to be married to the coordinates of the main screen.

  Is there a way to allow multiple entries in Win7? A mouse and a touch screen running on two screens simultaneously and independently?

  Thanks in advance :) JKLauderdale

  Good so I tried this out.  If you touch the screen of the Surface to scroll through everything that is open about it, he doesn't move the cursor of the mouse at all.  The arrow of the mouse pointer disappears from view, but as soon as you touch the mouse again, it's still there at the original location on the touchscreen (no) external.

  But touch the other program moves the focus (the other program you touched becomes 'active' program), then to continue typing my response here for example, I had to click once again.

• I have a Toshiba satellite click W35Dt A3300 is a touch screen and I want to know if windows 7 comes with touch screen pack

  * Original title: need info

  I have a Toshiba satellite click W35Dt A3300 is a scree touching one I want to know if windows 7 comes with the pack touch screen or I have to download a package of contact after that I have download windows 7

  Do you mean this - http://windows.microsoft.com/en-us/windows7/whats-the-microsoft-touch-pack-for-windows-7

  If Yes, - "Touch Pack comes preinstalled on some multitouch in Windows 7 PC, but it is not included in Windows 7. The Touch Pack is available for download from the Microsoft Download Center. »

• New hard drive, installed Windows XP PRO version 2002 - resolution screen and internet problems

  My Dell has had some problems (patially due to age), so a buddy of mine and I put a new hard drive in it and then installed windows XP Pro.  Installation went great, but now that it's installed, I can not get the screen resoultion to change and I can't connect to the internet.  I feel like with the internet, can I have a driver problem.  I know that the internet works, I'm on it with the laptop right now.  Any suggestions?

  ????  I'm not sure I understand your question. You download the drivers to a place, you will find them, as the office. If you want to put them on a USB stick, copy the files downloaded to the key and take it to the computer target. Copy the files on the computer desktop. Double-click on a file and it will unpack the installation routine starts. Follow the installation wizard. Reset when said to repeat as needed until all the drivers, etc are installed. Subsequently, you can delete the downloaded files from Dell (from installation .exe). MS - MVP - Elephant Boy computers - don't panic!

• Start white screen and other problems

  I don't know what exactly caused this do. I turned on my computer as usual, but instead of start normally, the computer showed the tutorial screen that you see when you start your computer for the first time.
  When I went, I found that all applications on my startup screen have disappeared, the only thing that came with a result when you use the search tool is Google Chrome. More of this, I am unable to access or change the settings for my PC, create new folders, etc. (the drop down just 'empty' bed) or pin programs to my taskbar. My desktop items also have this box little pop up next to them when I hover over them.
  I started my computer in safe mode, but the problem still persists.
  Help would be greatly appreciated.

  Brilliant Hello,

  Thank you for the update on the issue.

  According to the result of the scan SFC that he managed to find some damaged files, but could not fix some of them, it means that there is a corruption with your system files. To go further and to repair system files, so I suggest you run the DISM commands and see the are able to repair system files.

  Maintenance of the images of deployment and management (DISM) installs, uninstalls, configures, and updates features and CBS packages in Standard Windows 8 Embedded images (standard 8) offline and offline Windows Preinstallation Environment (Windows PE) 4.0 images. The commands and options that are available for servicing an image depending on whether the image is offline or online. All controls operate on a standard 8 offline image. Subsets of commands are available for the maintenance of an operating system.

  I suggest you run the commands in elevated command prompt and control below if this can help.

  • Press Windows key and X at the same time.
  • Choose line (Admin) command on the shortcut menu.
  • In the command prompt, type the following command and press ENTER:

  DISM / Online/Cleanup-Image /ScanHealth.

  This command is used to check if an image is repairable. Scan the image to check corruption. This operation may take several minutes.

  DISM / Online/Cleanup-Image /RestoreHealth

  This command is used to repair an image.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.