98SE to Vista transfer information

Similar Questions

• "This USB mass storage device can transfer information faster if you connect it to a USB 3.0 port Superspeed ' when the device is already connected to a USB 3.0 port.

  I just bought and installed a USB 3.0 card. It is the Startech PEXUSB3S2 PCIe card. I installed the card in a PCIe 2.0 X 1 slot. The manual says it's exactly the slot, that it supports.

  The Manager device displays NEC Electronics USB 3.0 Host Controller and NEC Electronics USB 3.0 Root Hub are installed and are working correctly. I have a Thermaltake BLACX5G 5 G USB 3.0 hard drive caddy. The transfer rate is only 35 MB/s using the HDTune benchmark. It is a USB 2.0 speed.

  When the player is turned on, windows displays the message "this USB mass storage device can transfer information faster if you connect it to a Super speed USB 3.0 port»

  For some reason, the system doesn't see the caddy to drive USB 3.0 as being plugged into a USB 3.0 port, when it actually is.

  I remember having this same problem with Windows XP, when I bought a USB 2.0 card. The only thing that fixed it at the time was upgraded to XP SP2.

  This should not be a problem because I know that Windows 7 pro 64-bit supports USB 3.0.

  My motherboard is an ASUS P5QL-EM support an Intel Core 2 Quad and 4 GB of DDR2 memory. According to the manual owner the PCIe x 1 slots support architecture 1.0 and 2.0.

  Edit: I just tested the external hard drive and expansion card USB 3.0 on my motherboard Gigabyte of friends running Windows XP. Everything worked perfectly, no problems at all.

  Here, there is a problem with Windows 7 or the motherboard. Still unresolved, currently installs a floppy drive so I can update the firmware of my motherboard.

  I checked the implementation of the card several times, removed and installed in another motherboard to test, then removed and reinstalled again in my motherboard ASUS check several times for a fit course.  It still does not work. I have just completed update the firmware of the motherboard with the latest version, and I also did a new install of Windows 7, install the drivers USB 3.0 immediately after installing Windows over. None of this solves the problem.

  I'm running out of ideas on how to fix this without doing something drastic as a replacement for my motherboard. I don't want the speed of USB 3.0, but I don't think I'm ready for an another two or three hundred dollars to get it.

  I've been all over the ' net trying to find a solution and read tons about USB USB 3.0 specifically and in general. I can find no reason why the drivers would install and report that they are working correctly, but fail to connect to 3.0 speeds. I think that this would generate a certain type of error instead of such a strange symptom.

  EDIT:

  Here go us. I knew that is was a bad idea to buy one main (ASUS P5QL-EM) card that had to be overclocked to 1066 MHz for DRAM memory. I did all this work, and every time I reset my BIOS or updated it would always be the frequency DRAM back to where it should be (1066). After a reset of the computer was the starter and I just let it start instead of setting the DRAM frequency and, suddenly, USB 3.0 card worked perfectly. I confirmed this by setting the frequency to 1066 and looking at the USB 3.0 card fail again. I guess it must have something to do with the clock being sent to the PCIe bus.

  In any case, the USB 3.0 card works perfectly and gives me a transfer rate HD Tune to 99 MB/s on a drive from WD SATA 7200 RPM and 86.1 Mbps on a Samsung drive hard 5400 RPM / MIN 3,5 "SATA. These are the same reference points I get when these drives are connected to my internal SATA connectors. I'd say USB 3.o works perfectly now and maxing out the hard drives performance.

  Thanks for any help.

• TRANSFER INFORMATION FROM DRIVE D VISTA TO WINDOWS 7

  AFTER UPGRADING VISTA TO WINDOWS 7, I CAN'T GET WINDOWS 7 TO TRANSFER THESE DETAILS OR IT WILL RECOGNIZE INFORMATION SIMILAR TO A DVD.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• vista to vista transfer

  Hello
  I might need to transfer files from one Vista computer to reload the same Vista machine.  There are many ways to do it, but I only have questions on "Easy Transfer".  They are lower.  Any response to the sub questions would be much appreciated.  Thank you.

  1. If I read the information Windows 7 easy transfer correctly ( here and here ), I can't use this version to transfer files and settings to a Vista machine on a Vista machine.  Is this correct?
  2. Are there dangers that I should be aware of when using 'old' to 'new' vista vista Windows Vista to transfer easy transfer?

  Thanks again.

  Tony

  1. not true.  Windows Easy Transfer in Vista can transfer files and settings from one Vista computer to another.

  2. No.  To borrow a phrase, "it works." :-)

• Using Time Machine or the Migration Assistant to transfer information from and old Mac to a new one

  I had to think about upgrading a Macbook Air to a Macbook Pro and have done research on how pretty much everything (files, account icloud, etc.) to move to a new computer so I know how to do it when the time comes. I didn't save my current computer at the time I got it and didn't know whether it was necessary to do it before the transfer. Also, I found two different ways to move information from one mac to another, one way being using the migration wizard, the other via the time machine. The problem is that I've never used time machine (I checked my settings and it is turned off). I was curious to know which option would be the 'best' way and if not never back up my computer would be a problem. (If its possible, could someone also please explain how to back up my computer?)

  Thank you for taking the time to read this and I look forward I hope to get a reply soon!

  I use Time Machine often (and have used since its introduction).  I also upgraded my Mac hardware quite often (about every 18 months).  Whenever I move to a new machine, I use the Migration Wizard (and not Time Machine).  I've never had a problem.

  Then I suggest that you need not Time machine specifically in order to change computers.  However, you really need to keep backups simply because the material is not, and without a backup, you are subject to lose everything you have on your computer.

• Adobe Design Standard without connection to transfer information

  I have a design of Adobe CS5.5 Standard installed on a computer and want to transfer the key to license/activation on another computer. I don't have connection information, because someone else, who is no longer with the company, installed. Is it possible to transfer without login? Thank you!

  If you have the serial number, you can install CS5.5 to another machine. Please check enable and disable Adobe products

  You can Download CS5.5 products here.

• Hard Drive upgrade - what is the best software to transfer information

  I don't know how to transfer files and folders, no problem, but I want to upgrade my hard drive but don't want to lose my settings or programs.  I don't want to start over.  I had success in the past with some programs when switching from an old computer to a new, but it will not work on the upgrade.  Anyone know of a program that will allow me to put an external information, install the new hard drive and install XP, then copy the original information and programs.  The challenge for programs to work properly.

  It's on an Inspiron 8600 running XP Pro.

  Message edited by max2000 on 17/04/2008 07:35
  
  

• How to transfer information such as bookmarks, passwords, etc. in a new computer with Windows 7?

  Looked like my question disappear. I repeat. I'm trying to move the information from the old PC to a new. Used to be easy before, now he has only an option to import the files from the opera. Please indicate which part of the APP Data to copy the old model? Thank you.

  Hello

  1. Enter about: supported in addessbar on old Firefox Windows and press enter;
  2. Press the button "Open containing folder";
  3. New Windows Explorer window will appear;
  4. Copy all files and subfolders of this folder for Flash Player;
  5. Do 1-3 of the new Firefox Windows;
  6. Close new Windows Firefox;
  7. Copy files and folders from a file open flash drive;
  8. You are ready.

  Kind regards
  EMU

• Transfer information from the old hard drive to new

  I have a desktop compaq presario with hard drive failure and I was wondering the best method for transfer of norton 360 and other info on new hard drive.

  Contact Norton Customer service. Use the online chat.

• Pavilion 400-314: how to transfer information from Drive on PC that isn't working hard for new PC?

  My old Pavilion s5123w PC power collapsed work put into a new one, it has not worked, Pc lights. I bought a new PC of Pavilin 400-314. Can I buy a USB cable for it and for my new PC and trasfer information in this way in HDD old PC Plug?

  Thanks Scott

  This BH trying to tell you is really simple.   An internal hard drive needs an adapter to connect it to another external system.   I use this adapter for most punctual transfers.  I hope that this product.

• Transfer information from various bills to a summary worksheet

  I have numerous invoices created in number, same format and saved in the same folder. I want to take information about each invoice and collect on a single sheet. Anyone can help, or point me in the direction where I should ask this question.

  Numbers can refer to cells in the same file.

  So the first step would be to move (copy and paste) each invoice in a sheet on a new document.

  Once you have all the Bills in the same documents, you can create a summary sheet

• How to transfer information from my laptop to my data traveller or flash drive?

  Original title: IM having a blond momet LOL

  How to get information from my laptop to my data traveller or flash drive not sure leave which is the correct name

  Hi DeborahCoffin,

  You can try dragging them on, or you can insert the USB key, right click on the file/folder you want to copy, then select COPY. Then find your USB drive icon, then right-click again and select PASTE.

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

• Updated WMP11 - media considers correct albums, but will not transfer information to the Player library

  trying to add missing information about media albums in the library. Adding media, or update media variations have no effect. even after that he finds the correct information on the line in its database,... all the answers?

  Hello

  You did changes to the computer before the show?
  
  I suggest you follow the Microsoft article and check if it helps.
  
  You cannot view, add, or remove items from the Windows Media Player 11 library: http://support.microsoft.com/kb/925718

  It will be useful.

• Advice on the best way to transfer information from the old laptop again.

  Please could you offer me advice, I bought a new laptop and want to transfer everything from to the old laptop, any advice would be grateful. Thank you James

  Please could you offer me advice, I bought a new laptop and want to transfer everything from to the old laptop, any advice would be grateful. Thank you James

  Transfer files and settings from another computer
  (This is a web link, click on it.  There is even a video.)

  PS - you install your applications (office suites, alternative web browsers, customers of messaging, plugins, games, etc) manually using the installation media and you SHOULD do before using the Windows Easy Transfer Wizard.

• You need Lightroom cc transfer information / catalog

  Hello!

  
  

  That's my problem, I only use Lightroom cc to transfer my pictures and so I don't want to create automatic catalog. Is this possible?

  
  

  Thank you.

  It is not possible to cancel the creation of the catalogue.

  However, you can delete the created catalog and keep the images folder structure.