A 6s Iphone can be fixed after entering the date of 1970, which is a problem of

Similar Questions

• 10.11.5 wheel can't turn after entering the password

  Updated 11.5 via download Apple store.  Twice same result twice as follows.

  Everything downloaded and installed.

  Open connection and request for password.

  Password entered, accepted, wheel starts turning as if loading and opening.

  But never stop.  Ran too long 4 hours wheel revolves always.  Tried several restarts the same results.

  Removed all accessories and restarted.  Same results.

  Tried in safe mode, same result.

  A late 2012 mini mac running

  Had similar problems with 11.3 and 11.4

  With these versions everything froze after the os x open could therefore access files, etc.

  Check records / var / / via terminal and he indicated that the folder .trach and zz has existed.

  Tried to download combo th 10.11.5 via Safari with a message popping up stating, there was not enough space on the disk.  Tried all three disks) 1 89 free free GB 2) 790 GB 3) where el capitan had to go to 140 GB free.

  Tried to restart with time machine, but it would not recognize the files.

  Any suggestions?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• I had to change my Apple ID recently. Since then, iPhone 6 ask me to enter the password of the old Apple ID. How can I fix?

  I had to change my Apple ID recently. Since then, iPhone 6 ask me to enter the password of the old Apple ID. How can I fix?

  IPhone6, OS 9.3.4

  Try to do a slight reset of your iPhone

• HP window 8 - after entering the password he will bring back to the new blue ask lock screen password.

  Hello

  Everything worked well. Today, I tried to open up the laptop and after entering the password it brings back to the blue lock screen. My photo account is not visible as well as the shutdown option does not. I don't have a single account.

  F8 key does not have to open it in safe mode.
  F11 key does not work for the recovery of the system.

  That's happened? Can it be fixed? And if so what can I do?

  HP Compaq laptop
  OS-Winodw8

  Please help ASAP!

  Hello Ganesh

  1. I use local windows account.

  2. all the icons on the login page is disable. So I can't use power option in the lower right of the login screen.

  3. when I contact the manufacturer of the computer, they said to the only option is "OS to load again" and then I lose all data.

  But, my problem is now solved with another technique.  I want to share. Then someone else get help.

  1 shut down your system.

  2. remove the battery.

  3. Insert the power plug.

  4. turn on your system.

  5 disable the button of your electricity, where the socket is connected.

  6. your system will stop instantly.

  7. yet once turn on the button of your electricity, where the power plug is connected.8. Start with the system.

  9. you will get the option to set the advance.

  10. choose the option system restore point and follow the instructions.

  11. it will show what was guilty.

  -In my case, I installed a jdk latest software last weekend while I had the old version of the jdk (I was not aware of his presence) and that caused the problem in the end of this week.

  - So, if you install software that is already present in your system. (be it in the previous version)
  You might face this problem.

  -I would suggest Microsoft; In window 8 it must be provided some warning if someone tries to install software that is already present in the system. So this problem cannot arise.

• I have a problem with the Bitlocker does not not after entering the password.

  Original title: my bitlocker encrypted Drive not respoding after entering the password.

  Hello

  I tried to block my external hard drive with bitlocker, but unfortunetly got encryption interrupted before finishing because I accidentally unplugged the hard drive, I use windows 7... And now when I enter the password the bitlocker stops responding until I unplug the external drive, I tried to decipher the drive using bitlocker repair tool in cmd, but she also is stuck at 29% every time if I managed to get some data back but not my whole data.

  , I just want to know that is there any way to recover my entire data or unlock the drive?... .Please help!

  Thank you

  I'm sorry to say, but you have made two big mistakes:

  (a) you forgot to backup your data regularly, e.g. once per week.
  (b) you have not backed up your data before making a major change, such as when your data encryption.
  There is a small chance that you can repair the damage with the found here BitLocker Repair tool:
  http://TechNet.Microsoft.com/en-us/library/ee523219 (WS.10) .aspx
  If this isn't the case, then you will have to deal with this disaster as a harsh reminder that regularly back up the files is not an option but a 'must '.

• problem with fonts (eith text layers) after entering the serial number

  

  

  PS CS6 x 64 Extendet

  After entering the serial number moved layers of text in the files which were made in the the trial version

  Welcome to the forum!

  I never heard talk about fonts moving once someone enters a serial number, but here are a few things to try:

  1. If you use a font management program, make sure that the fonts you need are still installed and assets.

  2. If you do not use a font management program, make sure that the fonts you need are in the proper location for your operating system.

  3 read the tips at http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html and see if any apply to your situation.

  I'm sorry I don't have more specific suggestions. Maybe someone else on this forum can help?

• I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  You get the error "a Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved" when the requesting computer (the computer 'demand' help) sends its private IP address instead of its public IP address in the request for assistance. The solution is 'easy' for some and difficult for others. I present here for your perusal:

  (1) obtain the public IP address of the requesting computer (by visiting a web page such as http://www.whatismyip.com)
  (2) save the remote assistance request computers
  (3) modify the remote request for Assistance (RcBuddy.MsRcIncident) using a text editor (such as notepad) and replace the private - section of IP address should be something like this:
  RCTICKET = 65538,1,192.168.1.33:3389 «»
  with the public IP address from whatismyip.com or elsewhere - should be something like this:
  RCTICKET = 65538,1,74.125.47.147:3389 «»
  (4) save the file of RcBuddy.MsRcIncident 'new '.
  (5) double click it to connect to the computer needing help
  (6) cross your fingers and hope it works!

  I hope this helps someone else - if it's too much trouble, feel free to use the tools mentioned elsewhere in this thread.

  -Computers Acorp
  www.ACoRP.net

• How can I fix a missing the MSVCP71d.DLL DDL file

  How can I fix a missing the MSVCP71d.DLL DDL file

  Hi GaryYS,

  Thanks for posting in the Microsoft Community.

  I'm sorry to know that you are facing a problem to install Maxim DL of Diffraction Limited.

  As you receive error message missing MSVCP71d.DLL, it would be useful if you can answer this question to help you further.

  1. when exactly you receive this error message?

  2 did you a recent software or hardware changes to the system?

  Msvct71.dll is a Microsoft C Runtime Library and it is necessary for the performance of several Microsoft and non-Microsoft applications on a Windows System.

  You try to run a SFC scan to check all corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  If you need further assistance, please answer and we will be happy to help you.

• I messup and now my system is not compatible, and every thing is blurry. I am trying to use the system restore, but nowhere can I enter the date of 2 days ago

  I spoil yesterday 8/24 today my system is not compatible, and every thing is blurry.

  I am trying to use the system restore, but nowhere can I enter the date of 2 days ago that do I do?

  Post proposed by the facilitator for the appropriate forum placed

  Hi Michael,

  We suggest that you try to start your computer in safe mode to check if the problem persists. You can follow the steps given on Advanced startup options (including safe mode).

  Let us know how it goes.

  Kind regards.

• I'm unable to install Adobe Creative Suite Design & Web Premium, even after entering the serial number under license. There is a message that says that the Adobe product much be not genuine. I have 8 licenses that I had installed on 2 computers avecjo

  I'm unable to install Adobe Creative Suite Design & Web Premium, even after entering the serial number under license. There is a message that says that the Adobe product much be not genuine. I have 8 licenses that I had installed on 2 computers with no problems. But the 3rd computer begins to complain that there cannot be a genuine version. I need some advice please.

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  Software not valid https://helpx.adobe.com/x-productkb/global/digital-certificate-revoked-aam.html

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  .

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of CS2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• I want to streamline my signature process sending.  I have the code I entered in my document to place the signature on the form.  Y at - it a code or a setting that I can put to automatically enter the address email of the person to whom I am

  I have the code I entered in my document to place the signature on the form.  Y at - it a code or a setting that I can put to automatically enter the address email of the person who I send the form?  Also, I would use my own default message for the signatories.  Is there a place that I can get that think so I can't copy and paste the message every time?  I still need to sign first, and therefore a default section with my choice and message to signatory would be great.

  Hello Kevin,

  From now on, you cannot set the recipient's e-mail address in the document itself or let him choose automatically. You must provide either the Web portal or even using the API, the e-mail address of signatory manually. According to the models of message, if you have account level business, you can set it by going to the tab account-> account settings-> Message template,.

  Kind regards

  -Usman

• Have LR4... can't type or enter the letters instant and in

  Have LR4... can't type or enter the letters in "develop" for the new folder titration or snapshot mode.

  I would like to move this thread to the correct Photoshop Lightroom forum

• What should I do after entering the serial number when it is options?

  What I do after entering the serial number and then go to the Options?

  It won't go any further.

  Hi John,.

  Please mention the name and version of the product you need help with, also mention the operating system, on which you try to install and activate the product.

  Kind regards

  Bani

• This is a silly question, but I can't fix it! The icons that appear on my pictures I change them, have disappeared. The only way I can see them is in the grid. How can I get the icons on the miniature pictures of the gallery full loaded?

  This is a silly question, but I can't fix it! The icons that appear on my pictures I change them, have disappeared. The only way I can see them is in the grid.

  How can I get the icons on the miniature pictures of the gallery full loaded? TIA =)

  You probably dragged the thumbnail size film of small size which prevents the display of the badges of Lightroom. Using your mouse, the mouse on the top line of the strip of film and then do slide it supports to increase the size.

• I have a personal account of CC.  I'll get a CC account through my work for my machine here soon.  In the meantime, I can run my CC on my work computer or which will cause problems in the future?

  I have a personal account of CC.  I'll get a CC account through my work for my machine here soon.  In the meantime, I can run my CC on my work computer or which will cause problems in the future?

  When you install the cloud on a computer, the use of the programs is related to the Adobe ID used for installation

  Then use the cloud with a different ID, you need to disconnect from your personal account and sign in to your professional account to install and use

  If you would eventually use only the ID of your work on your work computer, it would probably be best to completely remove your personal ID and Cloud programs before you install using your work ID.

  Sign out of your personal account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Log in to your account... Install