A bit of an issue with Microsoft & AVG and Isearch & Myclean PC

Similar Questions

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• How can I swap buttons of the mouse on a--no Microsoft Mouse with Microsoft Mouse and keyboard Center? (I have a Microsoft keyboard).

  I did a new install of Windows 8 on my Dell desktop computer that has a keyboard, Microsoft Natural 4000 and Dell's USB mouse.  Windows 8 Microsoft keyboard recognized and automatically downloaded and installed Microsoft Mouse and keyboard Center version 2.0.162.0.  However, I'm a lefty mouser and installation of the MS mouse & keyboard Center back on my right handed mouse buttons.  (I went to control panel |) Mouse and swapped buttons immediately after installation.)  When I went into the control panel. Applet of the mouse and the keyboard and mouse Center had resumed the first tab of the control panel mouse properties, stating "click here to change the settings for the Microsoft mouse.  This is the tab where the "Swap mouse buttons" is usually.  When the mouse and keyboard Center is launched, it offers only options for the keyboard.  Do I have to abandon my Microsoft keyboard or purchase functions go a Microsoft mouse to get exchanged my mouse buttons?

  How to swap the mouse buttons on my non-Microsoft with Microsoft Mouse and keyboard Manager installed mouse?

  Thank you

  C.C.

  To get all the benefits of Mrs Maes & Bishop, you can buy a MS mouse is compatilble with the Manager, MS software is for devices of Ms and it is unlikely that MS will change their software to accommodate mice made by other sources.

  If you want to keep the Dell mouse, you will need to disable MS M & K Bishop.

• Are there still known issues with Lightoom 5 and El Capitan with respect to attachment? I know that problems have been resolved with CC Lightoom

  Are there still known issues with Lightoom 5 and El capitan with respect to attachment? I know that problems have been resolved with Lightoom CC.  I looked on the Internet but most of the references are Lightoom CC.  Ive got all the updates with Lightoom 5, (Camera RAW 8.1), but also Apple, (El Capitan 10.11.3), but my Nikon D800 will not always tie.

  HAL P Anderson wrote:

  The problem is in the SDK (SDK) of Nikon. He used features of OS that changed with El Cap. All previous versions of LR were broken by the Exchange operating system. For LR 5 to work, it must be associated with the new SDK of Nikon, and Adobe is not reissue of older versions.

  The result is: LR5 and previous versions will continue to not be able to attach Nikon under El Capitan. I'm sorry.

  HAL

  Although what you say is maybe true, I'm not sure, but there were reports of people that says exactly the opposite. Home of Nikon has not worked in 2015/6 but continued to work in LR 5 on the same Mac running 10.11.x.

• With Microsoft Vista and McAfee Internet connection issues

  Hi I would appreciate any help with this issue.  I'm not a very experienced user.  I'm having all kinds of problems with McAfee Security 9.0.  He stops working and says I have no internet connection and that you can not update. I contacted McAfee and they came on my computer, uninstalled and reinstalled and I'm still having the same problem.  Them, that I came across an article from McAfee dealing with this problem and Windows Vista.  I have the 64 bit version.  The solution is 1. Click on the Windows button and type cmd.

  2. right click on cmd and run as administrator

  3. at the prompt, type the following command, and then press ENTER:

  netsh int tcp set global autotunninglevel = off

  It then gives you instructions to reactivate the auto-tuning network if this does not resolve the problem.

  I would like to know if anyone has tried this and the results, also if this works this deactivation causes me to have other problems with my computer.

  This may seem very simple for some people, but because I'm not known I want to create more problems than I have now.  Through this site, I learned how to remove McAfee from my computer, and it would be the last thing I would do if nothing works.

  Thank you... Victoria

  Hello

  It's as good as anything else, it's free and designed to work properly with Windows OS'.

  http://www.Microsoft.com/security/PC-security/MSE.aspx

• Security issues with Microsoft Security essential and other anti-malware, anti-spyware programs

  Hello, I would like you to help mewith the following questions...

  Related to the question of the conflict between the programs microsoft security essential antivirus and antimalware bytes free (anti-malware) what is your opinion? Can they work together?
  And a second question: can I have windows firewall turned on at the same time with another protection in real time from the anti-malware bytes and Super anti-spyware free software?
  And the last question: what Windows Defender?
  I disabled it in my computer, probably because I use Mr. S. Essential, is necessary in the 32-bit edition of Vista business with MSE and Antimalware running together?
  Thnx in advance...

  Free Malwarebytes and Superantispyware Free cause no conflict with Microsoft Security Essentials.

  Keep Windows Firewall turned on.
  You can't and don't need to use Windows Defender on Vista, when you use Microsoft Security Essentials.

  You can find the answers to these questions and others like it in the FAQ Guide reference Microsoft Security Essentials

  http://experts.Windows.com/w/experts_wiki/89.aspx

• Hello, the issue with Microsoft Server-link plan with the execution of query execution

  is it possible to map estimated plan (parts) to running query? for example I have a simple query worked 5 minutes already. And I have his plan estimated with 3 main rooms as the clustered index seek for one of join tables, analysis of table to the second table junction and the nested loops join operation that works with two inputs and outputs corresponding rows.can I somehow know what exact SQL Server query execute development plan part is currently - running at this minute - for example is reading pages of data #n - #m with the index clustered or / and match lines key #x - #y.

  Hello

  I suggest you according to the question in this forum and check if that helps:
  http://social.msdn.Microsoft.com/forums/en-us/TransactSQL

  It will be useful.

• Anyone know of any compatibility issues with Windows 8 and RV series routers?

  I have a small network with a laptop computer, Windows 8, Windows XP desktop computer and a network MyBookLiveDuo storage device. I have sharing enabled between these devices. Everything worked well on a network switch. I replaced the switch with the RV110W VPN Firewall Router to add better security to my network before I have expand it. Since then, I have a laptop Windows 8 intermittent connectivity while the connectivity of the XP desktop computer shows no problem.

  On the laptop Windows 8 I ran network troubleshooting, and he complained that two devices on the network are (NAT) network address translation and the symptoms he describes is what I see. Problem is that I don't have a network Analyzer to look at the network in more depth. I looked online for the RV110W documentation and if NAT is listed as one of the characteristics, there is no discussion in the documentation on how to manage this feature in the router.

  I can connect to the Windows 8 laptop from Office XP and access shared content. I can connect to the Duo since Office XP without difficulty. However, except when they reappear periodically under the heading of my network in Explorer on the laptop Windows 8, I can't access the Office XP or the Duo of the laptop Windows 8. Curiously, however, I have a part of the Duo mapped as a network drive on the laptop Windows 8 and I can access it even when everything else has gone. Also, the interface of management for the Duo appears on the laptop Windows 8 and I can access the Duo to manage. Only, I can't access the shares on the Duo. Then all of a sudden they reappear under network in the file Explorer and I can then access. I think it must have to do with NAT, but I can't find anything out about it.

  If it's something I can turn on the router long enough to see if the problem goes away I would like to try, but I can't find it in the documentation, and I can't find it when I look aroiund in the management interface.

  The fact that I am not having the form of the XP desktop computer problem makes me think that a compatibility issue with Windows 8. Does anyone know if Windows 8 did anything with NAT? I try to get help from Microsoft Technical Support, but their level 1 tech told me to call Tech Support Pro when they open later this morning. Support cat Cisco won't open until Monday at 09:00.

  Also, throughout this connection problem Internet from the laptop through the router is never interrupted. It's strictly connectivity with other devices on the internal network that comes and goes.

  Hi Gregg,

  NAT must not play unless your applications on the internet. The "port Internet" or "WAN port" is a NAT port that converts your public IP address from ISP to your LAN subnet addresses. NAT allows multiple computers on a network to use 1 public IP address.

  If your devices are connected to the Ether "LAN ports" they are not affected by NAT unless they are Web applications. 4 'LAN ports"are 2 layer switch ports. This means that all local requests are forwarded by the switch ports.

  This device did replace exactly? The XP computers, DUET and window 8, make these products using the static IP address or you allow the RV110 to assign an IP address automatically? What IP address you are using on the LAN of the RV110?

  -Tom
  Please mark replied messages useful

• Problems with Microsoft fax and scan

  I use Microsoft fax and scan on a win 7 pro sp1 machine, to connect to a Microsoft Fax under windows 2012 R2 server.  Inbound faxing works ok, but for outgoing faxes, a few questions.

  on the server, I can see 4 pages of coverage.  How can I force users to use these 4 cover pages.  I thought that they show for all users in the domain, but they did not.

  When you send a fax how do I get it to look at outlook (we use office 365) for the contact database?

  for both the fax and scanning seems to be only looking on the local computer.  I'm looking for something more integrated with this solution.

  Thank you

  -Phil Lawson

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Anyone know why I have some formatting issues with my Tablet and phone of the sites? I only have the layout of office. There are banners and footers only reaching is not the edge of the screen.

  I only have the layout of office. As I had problems with the phone and Tablet page layouts. However there are are the banners and footers only reaching is not the edge of the screen. This is only a problem when accessing the site via a phone or a tablet.

  the site is www.excellententertainment.biz

  See you soon

  Hughie

  Do a Select all on your pages (most likely a master page is it effects all pages) and you'll probably find an empty element or element that goes beyond the edges of the design to the design of your office.

• Compatibility issues with windows 7 and maplestory

  I have windows 7 32 bit, I downloaded maplestory and when I clicked it, he jumped to the top with a box that says it has compatibility problems.  I tried to go to the properties of switching it forms XP SP3 and windows vista and rebooted but none of this seems to work.  I also went to troubleshoot compatibility and put it in my specefic problems, but it comes back with an error in Japanese.

  Help?

  Hello

  MapleStory has no information on the Windows 7 Compatibility Web site. The origin of the game specifications are for Windows 98 - XP.
  It is possible that they did not have it compatible with Windows 7 yet.

  You can check with the support of Maplestory for all hotfixes that may be needed to play the game on Windows 7.

  http://MapleStory.NEXON.NET/support/downloads.aspx

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error on blackBerry Smartphones 0x80043ade - SYNC issues with Outlook 2010 and softwear with Tower Desktop

  I get the 0x80043ade error message when I try to configure my turn with the new Office Manager and my Outlook 2010 Microsoft Office. I have Windows 7 OS. Does anyone have a solution?

  It worked for me, thank you very much for your help!

  Devices: BB Curve 8900 & Windows 7 Professional 64-bit MS Office 2010 & Sony Vaio VGN-SR59VG

  angelzz

• Recently heard of virus hitting computers with Microsoft 6 and newer, do not use the windows Explorer to the "patch", created to solve this problem, aol and FB usable?

  On cable news, a virus attacks computers with versions Microsoft 6 or more, can still be used safely FB and aol browsers?

  On cable news, a virus attacks computers with versions Microsoft 6 or more, can still be used safely FB and aol browsers?

  It is not a virus - it is an exploit that COULD allow specific malware to enter your computer.

  Recommend that carefully consider you the thread following - you have to be careful but should not overreact either: http://answers.microsoft.com/en-us/protect/forum/protect_other-protect_start/virus-on-internet-explorer/6d897630-54c6-4420-b627-4d2a7748be15

  Kind regards...

• on my xbox, I bought a song with microsoft points and he gave me the error code 80070057 what can I do to recover my points

  I used 160 microsoft points to buy a video clip, he said not that nothing was wrong with the video. so I bought it, it says see downloads, so I did downloaded but as I tried to play, she would not play. So I deleted it tried to download and play again it gave me the error code 80070057. can I get my points

  Hello

  You can check this link:

  When you use your Xbox 360 console to download and view videos or movies, you receive an error code

  http://support.Microsoft.com/kb/948719/en-us

• Issue with MS10-077 and KB2160841

  I keep having the same problem with the KB2160841 update - I get the error MS10-077

  It keeps prompting me to install an update, but it still gives me an error message. I'm stuck in this loop and can't get out.

  Your Pro advice is much appreciated.

  Thank you very much.

  Desrochers

  Credits go to Control_tps

  Try the following steps, please:

  1. go in programs and features, click on it.

  2. scroll to the bottom for Microsoft.Net Framework 4 Client Profile, do a right click.

  3. we will give you a choice of uninstall/change, click it.

  4. then it will give a choice to repair, choose repair it.  It will take about 4 to 10 minutes to repair (with my PC) experience may vary.

  5 once completed, will update you Center and update again.

  If not fixed, try to remove .net Framework 4.0 with the .NET Framework Cleanup Tool (http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx ), reinstall it and install the updates.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/